D5011S [GMI]

I.S. SIL3 2-Wire HART® Transmitter Power Supply;
D5011S
型号: D5011S
厂家: G.M. International    G.M. International
描述:

I.S. SIL3 2-Wire HART® Transmitter Power Supply

文件: 总1页 (文件大小:278K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
www.gminternational.com  
Intrinsically Safe Isolators > Analog Input  
D5011  
I.S. SIL3 2-Wire HART® Transmitter Power Supply  
The Repeater Power Supply D5011 module is a high integrity analog input interface suitable for applications requiring SIL 3 level in safety  
related systems for high risk industries. It provides a fully floating dc supply for energizing conventional 2 wires 4-20 mAtransmitters located  
in Hazardous Area, and repeats the current in floating circuit to drive a Safe Area load. The circuit allows bi-directional communication  
signals, for HART® devices.  
FEATURES  
TECHNICAL DATA  
SIL 3 / SC 3  
Supply  
Input from Zone 0/Div. 1  
24 Vdc nom (18 to 30 Vdc), reverse polarity protected.  
Current consumption: 90 mA (D5011D), 45 mA (D5011S), @ 24 Vdc with  
20 mA output, typical.  
Power dissipation: 1.35 W (D5011D), 0.675 W (D5011S), @ 24 Vdc with  
20 mA output, typical.  
Installation in Zone 2/Div. 2  
4-20 mA Passive Input, Source Output  
HART® compatible  
Input and Output short circuit proof  
High Accuracy  
Input  
Three port isolation, Input/Output/Supply  
High Density, two channels per unit  
4 to 20 mA (2 wires Tx current limited ≈ 25 mA), reading range 0 to 24 mA.  
Transmitter line voltage: 15.0 V typical, 14.5 V minimum, @ 20 mA.  
Output  
4 to 20 mA, on max. 550 Ω load in source mode (typical 12 V compliance).  
Response time: 5 ms (0 to 100 % step change).  
Performance  
Ref. Conditions: 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature.  
Calibration accuracy: ≤ ± 0.1 % FSR.  
Linearity accuracy: ≤ ± 0.05 % FSR.  
Temp. influence: ≤ ± 0.01 % FSR on zero/span for a 1 °C change.  
FUNCTION DIAGRAM  
Isolation  
Additional installation diagrams may be found in Instruction Manual.  
I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V; Out/Supply  
500 V; Out/Out 500 V.  
Hazardous Area  
Safe Area/Zone 2/Div. 2  
Environmental conditions  
Operating temperature: temperature limits –40 to +70 °C.  
Storage temperature: temperature limits –45 to +80 °C.  
MODEL D5011S  
Safety description  
Associated apparatus and non-sparking electrical equipment.  
Uo = 25.9 V, Io = 92 mA, Po = 594 mW at terminals 7-8, 9-10.  
Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.  
5 +  
6 -  
=
=
Supply 24 Vdc  
HHT  
=
HHT  
2 Wire Tx  
Source I  
7
8
1
2
+
+
?
=
mA RL  
In  
Out (SIL 3)  
Mounting  
I
=
-
-
DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.  
Weight: about 140 g (D5011D), 125 g (D5011S).  
Connection: by polarized plug-in disconnect screw terminal blocks to  
accommodate terminations up to 2.5 mm² (13 AWG).  
Dimensions: Width 12.5 mm, Depth 123 mm, Height 120 mm.  
-
+
Termination  
board  
Power Bus  
connector  
MODEL D5011D  
5 +  
=
=
Supply 24 Vdc  
6 -  
=
HHT  
HHT  
HHT  
2 Wire Tx  
?
Source I  
7
8
1
2
+
-
+
-
=
=
mA RL  
In 1  
Out 1 (SIL 3)  
I
=
=
=
=
HHT  
2 Wire Tx  
?
Source I  
mA RL  
9
3
4
+
-
+
-
In 2  
Out 2 (SIL 3)  
10  
I
=
-
+
Termination  
board  
connector  
Power Bus  
ORDERING INFORMATION  
D5011S: 1 channel  
D5011D: 2 channels  
Accessories  
Bus Connector JDFT049, Bus Mounting Kit OPT5096.  
Functional Safety Management Certification:  
GM International is certified to conform to IEC61508:2010 part 1 clauses 5-6 for safety related systems up to and included SIL3. In addition, GM International products have been granted I.S. certificates from the most credited Notified Bodies in the world.  
FSM  
SIL 3  
Data specified in this document are merely descriptive of the products and should be integrated with relevant technical specifications. Our products are in constant development and the information presented herein refers to the time of document issue.  
No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. Terms & Conditions can be  
found at our website. For more information refer to istruction manual.  
DTS0347-8  
© G.M. International s.r.l.  

相关型号:

D5011UK

METAL GATE RF SILICON FET
SEME-LAB

D5012UK

METAL GATE RF SILICON FET
SEME-LAB

D5013UK

ROHS COMPLIANT METAL GATE RF SILICON FET
SEME-LAB

D5014

I.S. SIL3 2/4-Wire HART® Transmitter Power Supply
GMI

D5014D

I.S. SIL3 2/4-Wire HART® Transmitter Power Supply
GMI

D5014S

I.S. SIL3 2/4-Wire HART® Transmitter Power Supply
GMI

D5015

I.S. SIL2 2/4-Wire HART® Transmitter Power Supply
GMI

D5015SK

I.S. SIL2 2/4-Wire HART® Transmitter Power Supply
GMI

D5015SS

I.S. SIL2 2/4-Wire HART® Transmitter Power Supply
GMI

D5017UK

GOLD METALLISED MULTI-PURPOSE SILICON DMOS RF FET 150W - 50V - 175MHz SINGLE ENDED
SEME-LAB

D5018-06

Step Recovery Diode, 60GHz Max, Gallium Arsenide
SKYWORKS

D5018-24

Step Recovery Diode, 60GHz Max, Gallium Arsenide
SKYWORKS