首页 |元器件品牌

FF2S [GOOD-ARK]

Surface Mount Glass Passivated Fast Recovery Rectifier;
FF2S
型号： FF2S
厂家： GOOD-ARK ELECTRONICS    GOOD-ARK ELECTRONICS
描述：

Surface Mount Glass Passivated Fast Recovery Rectifier
文件： 总4页 (文件大小：373K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
FF1S thru FF7S  
Surface Mount Glass Passivated Fast Recovery Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Features  
• Glass passivated Fast Recovery rectifiers  
• Very low profile - typical height of 1.0 mm  
• Low forward voltage drop  
• Low leakage current  
• Moisture sensitivity: level 1, per J-STD-020  
• AEC-Q101 qualified  
• High temperature soldering guaranteed: 260℃/10 seconds  
• Halogen-free according to IEC 61249-2-21 definition  
eSGA  
(SOD-123FL)  
Typical Applications  
For use of general purpose rectification in lighting, cellular phone, portable device,  
power supplies and other consumer applications.  
Maximum Ratings (TA = 25 °C unless otherwise noted)  
FF1S  
FF2S  
FF3S  
FF4S  
FF5S  
FF6S  
FF7S  
Unit  
Parameter  
Symbol  
Maximum repetitive peak reverse voltage  
Maximum RMS voltage  
Maximum DC blocking voltage  
50  
35  
50  
100  
70  
200  
140  
200  
400  
280  
400  
1.0  
600  
420  
600  
800  
560  
800  
1000  
700  
V
V
V
A
VRRM  
VRMS  
VDC  
100  
1000  
Maximum average forward rectified current  
IF(AV)  
Peak forward surge current 8.3 ms single half sine-  
wave superimposed on rated load  
25  
A
IFSM  
- 55 to + 150  
Operating junction and storage temperature range  
°C  
TJ, TSTG  
Electrical Characteristics (TA = 25 °C unless otherwise noted)  
FF1S  
FF2S  
FF3S  
FF4S  
FF5S  
FF6S  
FF7S  
Unit  
Volts  
µA  
Parameter  
Test Conditions Symbol  
Maximum instantaneous  
forward voltage  
1.3  
VF  
1 A ,TA=25℃  
5
TA=25℃  
TA=125℃  
Maximum DC reverse current  
at rated DC blocking voltage  
IR  
50  
IF=0.5A,IR=1.0A,  
Maximum reverse recovery  
time  
trr  
150  
250  
500  
nS  
pF  
Irr=0.25A  
5.4  
70  
32  
1
CJ  
Typical junction capacitance  
4.0 V, 1 MHz  
juntion to ambient  
juntion to case  
juntion to mount  
RθJA  
RθJC  
RθJM  
Typical thermal resistance1)  
℃/W  
Note:1),The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB  
www.goodark.com  
1/4  
2014.01-Rev.A  
FF1S thru FF7S  
Surface Mount Glass Passivated Fast Recovery Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Ratings and Characteristics Curves  
(TA = 25℃ unless otherwise noted)  
Figure 2.Maximum Non-Repetitive  
Peak Forward Surge Current  
Figure 1.Forward Current Derating Curve  
Figure 3. Typical Reverse Characteristics  
Figure 4. Typical Junction Capacitance  
Figure 5. Typical Instantaneous Forward Characteristics  
www.goodark.com  
2/4  
2014.01-Rev.A  
FF1S thru FF7S  
Surface Mount Glass Passivated Fast Recovery Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Package Outline Dimensions  
DIM  
Unit: mm  
Unit: inch  
MIN  
MIN  
0.9  
0
MAX  
1.08  
0.1  
MAX  
0.043  
0.004  
0.041  
0.010  
0.079  
0.122  
0.033  
0.154  
A
A1  
B
C
D
E
L
HE  
0.035  
0.000  
0.033  
0.004  
0.067  
0.114  
0.017  
0.138  
0.85  
0.1  
1.7  
2.9  
0.43  
3.5  
1.05  
0.25  
2
3.1  
0.83  
3.9  
Soldering footprint  
Packing Information  
Packing quantities:  
3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel  
Tape & Reel Specification  
www.goodark.com  
3/4  
2014.01-Rev.A  
FF1S thru FF7S  
Surface Mount Glass Passivated Fast Recovery Rectifier  
Reverse Voltage 50~1000V Forward Current 1A  
Disclaimers  
These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-  
Ark product best suited to the customer’s application; they do not convey any license under any intellectual  
property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party.  
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any  
third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or  
circuit application examples contained in these materials.  
All information contained in these materials, including product data, diagrams, charts, programs and  
algorithms represents information on products at the time of publication of these materials, and are subject  
to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other  
reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an  
authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a  
product listed herein. The information described here may contain technical inaccuracies or typographical  
errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other  
loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou  
Good-Ark Electronics Co., Ltd. by various means, including our website home page.  
(http://www.goodark.com)  
When using any or all of the information contained in these materials, including product data, diagrams,  
charts, programs, and algorithms, Please be sure to evaluate all information as a total system before  
making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics  
Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information  
contained herein.  
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in  
whole or in part these materials.  
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on  
these materials or the products contained herein.  
www.goodark.com  
4/4  
2014.01-Rev.A  

相关型号：

FF3

 Surface Mount Glass Passivated Fast Recovery Rectifier
GOOD-ARK

FF3-04-R15

 Card Edge Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-04-S15

 Card Edge Connector, 4 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-06-R15

 Card Edge Connector, 6 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-07-R15

 Card Edge Connector, 7 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-07-S15

 Card Edge Connector, 7 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-08-R15

 Card Edge Connector, 8 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-08-S15

 Card Edge Connector, 8 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-09-S15

 Card Edge Connector, 9 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-10-R15

 Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-10-S15

 Card Edge Connector, 10 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK

FF3-11-R15

 Card Edge Connector, 11 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
©2020 ICPDF网 联系我们和版权申明