09M45-03-1-03N [GRAYHILL]

Rotary Switch, 3 Positions, SP3T, Latched, 0.5A, 28VDC, Solder Terminal, Through Hole-straight,;


型号：	09M45-03-1-03N
厂家：	GRAYHILL, INC
描述：	Rotary Switch, 3 Positions, SP3T, Latched, 0.5A, 28VDC, Solder Terminal, Through Hole-straight, 开关
文件：	总4页 (文件大小：338K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Multi-Deck Rotary Switches

SERIES 08

SERIES 09

.5" Diameter, 1/4 Amp, PC Mount

FEATURES

• Gold-plated Contact System

• 30°, 36°, 60° or 90° Angle of

ThrowOptions

• Compatible with Logic Level

Voltages and Currents

DIMENSIONS In inches (and millimeters)

PC Mount Style

Rear Views

Series 09

30° Angle of Throw

Front view shows terminal location of

36° angle of throw. Transpose rear

view for terminal location of 30° angle

of throw. See Circuit Diagrams for 60°

and 90° angles of throw.

.070 .010

(1,78 0,25)

TꢂP.

.562 .020

(14,27 0,51)

DIA.

.140 .015

(3,56 0,38)

TꢂP.

DIM. A + .046 – .020

(+ 0,05 – 0,51)

.312 .020

(7,92 0,51)

DIM. B RꢁF.

STUD

PROJꢁCTION

.135 .015 (3,43 0,38)

.260 .015

.588 .020

(14,73 0,51)

(6,60 0,38)

.134

.010

(3,40

0,25)

OF NON-

TURN

TAB

.134 .010

(3,40 0,25)

.375 .020

.094 .010

(9,53 0,51)

(2,38 0,25)

.187 .015

(4,75 0,38)

TꢂP.

#0 TꢃRꢁAD

.250 .020

(6,35 0,51)

1.200 .020

(30,48 0,51)

TꢂP.

.562 (14,27) SꢁR. 8

.625 (15,88) SꢁR. 9

.015 (0,38)

.125 + .001 – .002

(3,18 + 0,03 – 0,05)

DIA.

Series 08

36° Angle of Throw

COMMON LUG

NON-TURN TAB .062 .005

(1,58 0,13) ꢀIDꢁ Bꢂ

.020 .003 (0,51 0,08) TꢃICꢄ

INTꢁGRAL ASSꢁMBLꢂ NUT,

DO NOT RꢁMOVꢁ

TꢁRMINAL DIMꢁNSIONS AT

TꢃIS POINT ARꢁ .032 + .000 – .010

(0,81 + 0,00 – 0,25) ꢀIDꢁ

Bꢂ .015 + .000 – .003

Sꢁꢁ NOTꢁ

1/4-32 UNꢁF-2A TꢃRꢁAD

(0,38 + 0,00 – 0,08) TꢃICꢄ

Note: Common location for a single pole per

.140 .015

(3,56 0,38)

TꢂP.

deck switch. For common location on

multi-pole switches, see circuit diagrams.

.500 .020

(12,7 0,51)

DIA.

*Termination

A standard switch uses the entire 360° of each deck as required by the circuitry.

Thus one-sided termination is standard for Series 08, 36°, 1 pole switches with 1 to

5 positions per pole; it is also standard for Series 09, 30°, 1 pole switches with 1 to

6positionsperpole.Two-sidedterminationisstandardfor1poleswitcheswithmore

positions per pole and for switches of 2 or more poles per deck.

Special switches with one-sided termination can be made for circuitry which would

require two-sided termination in standard switches. Contact Grayhill for a special

part number. See also Special Options, page J-10.

.187 .015

(4,75 0,38)

TꢂP.

1.125 .020

(28,58 0,51)

TꢂP.

Grayhill part number and date code marked on detent cover label. Customer

part number marked on request.

Rotary

Grayhill, Inc.

• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

Multi-Deck Rotary Switches

CIRCUIT DIAGRAMS: PC Mount

Switch is Viewed From Shaft End and Shown in Position No. 1

Note: All common terminals are located above base terminals as shown.

C OF

NON-TURN

TAB

C OF

NON-TURN

TAB

Series 09

60° Angle

of Throw

Series 09

30° Angle

of Throw

ONꢁ POLꢁ

TꢀO POLꢁ

ONꢁ POLꢁ

TꢀO POLꢁ

C OF

NON-TURN

TAB

C OF

NON-TURN

TAB

Series 09

90° Angle

of Throw

Series 08

36° Angle

of Throw

TꢀO POLꢁ

ONꢁ POLꢁ

TꢀO POLꢁ

PC BOARD MOUNTING PATTERN

36° Angle of Throw

30°, 60° and 90° Angle of Throw

.134 (3,40) TꢂP.

.210

(5,33)

TꢂP.

.134 (3,40) TꢂP.

.280

(7,11)

TꢂP.

BASꢁ TꢁRMINAL

ROꢀ ꢃOLꢁ LOCATION

(Sꢁꢁ CꢃART)

Number of Poles

Per Deck

Common Terminal

Hole Location

ꢁ

1 Pole Per Deck

2 Poles Per Deck

SꢃAFT ꢁND

OF SꢀITCꢃ

.140

(3,56)

TꢂP.

.140

(3,56)

TꢂP.

SꢃAFT ꢁND

OF SꢀITCꢃ

ꢁ

Base Terminals

Hole Location

.070

Angle of Throw

(1,78)

30°

60°

90°

All

ꢁ and F

D and F

COMMON TꢁRMINAL ROꢀ

ꢃOLꢁ LOCATION (Sꢁꢁ CꢃART)

Diagrams shown for a two deck switch. Bushing mounting is

recommended for all PC mount rotary switches.

SHAFT AND PANEL SEAL

A shaft and panel seal is available to provide watertight mounting of the Series 08

and 09. Standard and Military Style rotary switches. Sealing is accomplished by

O-ring shaft seal and panel seal washer. ꢀhen the panel seal is compressed,

dimensionsareapproximatelythesameasanunsealedswitch.Sealedswitchesare

providedwithadoubleflatbushing.Non-turnfeaturecanbeaccomplishedbyproper

fit of this bushing into panel hole and/or by allowing non-turn tab to extend into (but

not through) panel. Military Style rotary sealed switches do not have a non-turn tab.

Rotary

Grayhill, Inc.

• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

Multi-Deck Rotary Switches

MILITARY QUALIFIED

Series 09

Series 08

Series 08 and 09 military switches are qualified

to MIL-DTL-3786/13. They include 30°, 36°, 45°

and 60° angles of throw with solder lug terminals

in sealed and unsealed styles. See front and

rear views at right. Standard variations which do

notaffectswitchperformancecanalsobemarked

as qualified product–contact Grayhill.

Front view shows terminal location of

Series 09, 30° angle of throw.

Transpose rear view for terminal location

of other angles of throw.

30° Angle of Throw

36° Angle of Throw

.562 .020

(14,27 0,51)

DIA.

.781 .020

(19,83 0,51)

OVꢁR TꢁRMINALS

.718 .020

(18,24 0,51)

OVꢁR

.260 .015

TꢁRMINALS

(6,60 0,38)

OF NON-TURN

TAB

.500 .020

(12,7 0,51)

DIA.

The military style is dimensionally the same as

the standard except for the solder lug. Convert

standard style switch drawings to military style

drawings by including this terminal detail and

changing the over-terminal dimensions shown

here.Grayhillcanprovidecompletespecification

drawings. Qualified switches can be ordered by

the Grayhill number or the "M" number; they will

be marked per MIL-DTL-3786/13.

15°

36°

Sꢁꢁ NOTꢁ

30°

.094 .010

(2,38 0,25)

Terminal Detail

.034 .003

(0,86 0,08)

Note: Common location for a single pole per

deck switch. For common location on

.068 .005

(1,73 0,13)

multi-pole switches, see circuit diagrams.

SPECIFICATIONS

Electrical Ratings

Standard Style

Rated: To make and break the following loads:

1/4 amp, 115 Vac resistive; 1/4 amp, 6-28 Vdc

resistive; 20 mA, 115 Vdc resistive; 50 mA, 115

Vac inductive; 20 mA, 28 Vdc inductive; to carry

4 amps continuous.

ContactResistance:50milliohmsmaximumafter Materials and Finishes

life

Military Qualified

Insulation Resistance: 1,000 megaohms

minimum between terminals and shaft

Dielectric Strength: 500 Vac (atmospheric

pressure) and 350 Vac (reduced pressure)

between mutually insulated parts.

DeckSeparators,EndPlateandSwitchBases:

Diallyl per (MIL-M-14) ASTM-D-5948

Rotor Mounting Plate: Thermoplastic

Mounting Bushing: Brass, tin/zinc-plated.

Shaft, Cover, Stop Plate, Retaining Ring,

Through Bolts, Shaft Extension, Stop Arm,

ThrustWashers,CoverPlateandRearSupport

Plate, Lockwashers and Nuts: Stainless steel

Detent Balls: Steel, nickel-plated

Contact Resistance: After 25,000 cycles of

operation, 50 milliohms maximum

The Series 08M and 09M also meet the

requirementsofMIL-DTL-3786SR13formoisture

resistance, stop strength, rotational torque,

vibration (10 to 2,000 cps), medium and high

shock, salt spray, explosion, thermal shock (-

65°C to 85°C) and terminal pull. ꢀhen tested at

sea level, 25°C and 68% relative humidity with

failure criteria of 50 milliohms maximum contact

resistanceand500Vacbreakdownvoltage,these

switches will make and break 250 mA at 28 Vdc

inductive (250 millihenries): 1/2 amp: at 28 Vdc

resistive: 1/2 amp; at 115 Vac: 60 ꢃz resistive for

10,000 cycles of operation.

Insulation Resistance: 1,000 megohms

minimum between terminals and shaft

Voltage Breakdown: 1,000 Vac initially

(500 Vac or better after most environmental tests)

Life Expectancy: 50,000 mechanical cycles of

operation. Note: Actual life is determined by a

number of factors, including electrical loading,

rate of rotation and environment, as well as

maximumcontactresistance,minimuminsulation

resistance and minimum voltage breakdown

required at the end of life.

Detent Springs: Tinned music wire

Terminals, Stator (Base) Contacts and

Common Plate: Brass, gold plate .00001"

minimum over silver plate .0003" minimum

Rotor Contact: Silver alloy, gold-plated .00001"

minimum

Mounting Hardware: Two mounting nuts .062"

(1,57) thick by .312" (7,92) across flats and one

internal tooth lockwasher are supplied with this

switch.

Mounting Nuts, Washers: Brass, tin/zinc-

plated and or stainless steel.

Electrical Ratings

Military Qualified

Materials and Finishes

Standard Style

SwitchBases:Melamineper(MIL-M-14)ASTM-

D-5948

Cover,DeckSeparatorsandEndPlate:Phenolic

per (MIL-M-14) ASTM-D-5948

Rotor Mounting Plate: Thermoplastic

Mounting Bushing: Brass, tin/zinc-plated.

Shaft, Retaining Rings, Through Bolts, Shaft

Extension, Stop Washers, Stop Arm, Thrust

Washers, Nuts, CoverPlateandRearSupport

Plate: Stainless steel

Qualified to the following MIL-DTL-3786/13

Circuit Values: (Also see Standard Style

description.) The Series 08M and 09M have been

tested to meet the requirements of MIL-S-3786,

Style SR13, the majority of which are listed. At

85°C, approximately 68% relative humidity and

sealevelpressure, theswitcheshavebeentested

to make and break the following loads, as stated

in MIL-DTL-3786/SR13: 125 milliamperes at 28

Vdcresistive:75milliamperesat115Vacresistive.

ADDITIONAL CHARACTERISTICS

Standard Style and Military Qualified

Contacts: Shorting or Non-shorting contacts

available in 30°, 36° and 45° angle of throw rotary

switches. Non-shorting contacts available in 60°

and 90° angle of throw switches. All are wiping

contacts with over 100 grams of contact force.

Stop Strength: 12 lb-inches minimum

Rotational Torque: 8-64 oz-in depending upon

the number of poles per deck and the number of

decks

Extended Studs: Switches of six decks or more

have longer studs with extra stud nuts for

recommended double end mounting.

Detent Balls: Steel, nickel-plated

The switches have also been tested at reduced

barometric pressure (70,000 feet), 25°C at

approximately 68% relative humidity to make and

break the following loads as stated in MIL-DTL-

3786/SR13. 50 milliamperes 28 Vdc resistive; 20

milliamperes 115 Vac resistive. ꢀhen tested to

the above loads at the stated conditions, the

Series 08M and 09M switches meet the following

life-limitingcriteriaafter25,000cyclesofoperation

in accordance with MIL-DTL-3786.

Detent Springs: Tinned Music wire

Terminals, Stator (Base) Contacts and

Common Plate: Brass, gold plate .00001"

minimum over silver plate .0003" minimum

Rotor Contact: Silver alloy, gold-plated .00001"

minimum

Mounting Hardware: Two mounting nuts .062"

(1,57) thick by .312" (7,92) across flats and one

internal lockwasher are supplied with switch.

Lockwasher: Stainless steel

Mounting Nuts, Washers: Brass, tin/zinc-

plated and or stainless steel.

Rotary

Grayhill, Inc.

• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

Multi-Deck Rotary Switches

CHOICES AND LIMITATIONS

Angle

Number of Decks

Poles

Number of

Series

Style and Designation

A = Standard

of Throw

Stops Terminals

Shorting Non-Shorting Per Deck Positions/Pole

S = Standard, Shaft/Panel Seal

M = Military Style

MS = Style M, Shaft/Panel Seal

01 thru 12

01 thru 09

01 thru 12

01 thru 09

02 thru 10

02 thru 05

Solder

Fixed

36°

P = Standard, PC Mount

SP = Style P, Shaft/Panel Seal

MP = Military Style, PC Mount

MSP = Style MP, Shaft/Panel Seal

Printed

Circuit

01 thru 12

01 thru 09

01 thru 12

01 thru 09

02 thru 10

02 thru 05

01 thru 12

01 thru 09

01 thu 06

01 thru 04

01 thru 03

01 thru 12

01 thru 09

01 thru 06

01 thru 04

01 thru 03

02 thru 12

02 thru 06

02 thru 04

02 or 03

A = Standard

S = Standard, Shaft/Panel Seal

M = Military Style

Solder

MS = Style M, Shaft/Panel Seal

30°

P = Standard, PC Mount

SP = Style P, Shaft/Panel Seal

MP = Military Style, PC Mount

MSP = Style MP, Shaft/Panel Seal

01 thru 12

01 thru 09

01 thru 12

01 thru 09

02 thru 12

02 thru 06

Printed

Circuit

A = Standard,

S = Standard, Shaft/Panel Seal

M = Military Style

01 thru 12

01 thru 06

01 thru 04

01 thru 03

01 thru 12

01 thru 06

01 thru 04

01 thru 03

02 thru 08

02 thru 04

45°

60°

Fixed

MS = Style M, Shaft/Panel Seal

Solder

A = Standard,

S = Standard, Shaft/Panel Seal

M = Military Style

01 thru 06

01 thru 03

01 or 02

02 thru 006

02 or 03

Not

Available

MS = Style M, Shaft/Panel Seal

P = Standard, PC Mount

Printed

Circuit

SP = Style P, Shaft/Panel Seal

MP = Military Style, PC Mount

MSP = Style MP, Shaft/Panel Seal

Not

Available

01 thru 06

01 thru 03

02 thru 06

02 or 03

A = Standard

S = Standard, Shaft/Panel Seal

Not

Available

01 thru 06

01 thru 03

02 thru 04

Solder

90°

P = Standard, PC Mount

SP = Style, Shaft/Panel Seal

Printed

Circuit

Not

Available

01 thru 06

01 thru 03

02 thru 04

ORDERING INFORMATION

Series: determined by the angle of throw

Style*: Letter(s) from the Choices and Limitations chart

Angle of Throw: Must agree with Series Number

09A30–03–1–12N–F

Stop Arrangement: Add letter C or F to a one pole per deck switch with the maximum number of positions

for a stop between position 1 and the last position.

Type of Contacts: N = Non-shorting; S = Shorting

Positions Per Pole: Requires 02 positions as a minimum to the maximum allowable dependent on the angle

of throw and poles per deck

Poles Per Deck: As limited by angle of throw and switch style

Number of Decks: As limited by the angle of throw, the poles per deck, switch style and types of contacts

* All rotary switches that are required to have military designated markings and testing adhering to MIL-3786 are to be ordered by specifying

the military part number identified on the appropriate slash sheet.

Available from your local Grayhill Distributor For prices and discounts, contact a Local Sales Office, an authorized local Distributor or Grayhill.

Rotary

Grayhill, Inc.

• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com

09M45-03-1-03N [GRAYHILL]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E