90B09T [GRAYHILL]
Slide Dip Switch, 9 Switches, SPST, Latched, 0.1A, 6VDC, Solder Terminal, Through Hole-straight, ROHS COMPLIANT;型号: | 90B09T |
厂家: | GRAYHILL, INC |
描述: | Slide Dip Switch, 9 Switches, SPST, Latched, 0.1A, 6VDC, Solder Terminal, Through Hole-straight, ROHS COMPLIANT 开关 |
文件: | 总2页 (文件大小:296K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Thru-Hole DIP Switches
FEATURES
• Tested for TO-116 Equipment
• Up to 10 Positions
SERIES 90B
Machine Insertable MIDIP
• High Pressure, Reliable Contacts
• Molded (Sealed) Base and
Optional Top Seal
90B
DIMENSIONS In inches (and millimeters)
CIRCUITRY
As viewed from the top of the switch in the
positions shown in the drawing.
Switch is packaged as shown
here with all positions on.
O
1
N
2
3
4
5
6
7
8
.290
(7,37)
MAX.
.165 .005
(4,19 0,13)
LENGTH .010 (0,25)
SEE CHART
C
L
.195
(4,95)
MAX.
.135 .010
(3,43 0,25)
TꢀP.
.375
.020 .002 (0,51 0,05) TꢀP.
.010
(9,53
0,25)
.012 .001
(0,30 0,03)
TꢀP.
.100 .005 (2,54 0,13) TꢀP.
.085 .005 (2,16 0,13) TꢀP.
DESIGNED FOR
.100 X .300 (2,54 X 7,62)
ON CENTER HOLES
ORDERING INFORMATION: Tube Packaging (Each tube is 19.5 inches long)
AvailablefromyourlocalGrayhillDistributor.
For prices and discounts, contact a local Sales
Office,anauthorizedlocalDistributororGrayhill.
No. of
Length
Inches
Length
Metric
Number
Per Tube
Part
Number*
Positions
2
3
4
5
6
7
8
9
10
.270"
.370"
.470"
.570"
.670"
.770"
.870"
.970"
1.070"
6,9 mm
9,4 mm
60
47
37
31
26
23
20
18
16
90B02PT
90B03PT
90B04PT
90B05PT
90B06PT
90B07PT
90B08PT
90B09PT
90B10PT
11,9 mm
14,5 mm
17,0 mm
19,6 mm
22,1 mm
24,6 mm
27,2 mm
*The "P"in the part number denotes top tape seal versions. To order without top tape seal, leave the
"P" off the part number when ordering.
DIP
9
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Thru-Hole DIP Switches
SPECIFICATIONS: Standard Styles
Ratings
76
2,000
78
2,000
90B
2,000
Mechanical Life: Operations per switch position
Make-and-break Current Rating: Operations
per switch position at these resistive loads
1 mA, 5 Vdc; 50 mA, 30 Vdc; or 150 mA, 30 Vdc:
10 mA, 30 Vdc; or 10 mA, 50 mVdc:
2,000
—
—
2,000
—
—
—
2,000
2,000
10 mA, 50 mVdc; or 25 mA, 24 Vdc; or 100 mA, 6 Vdc:
Contact Resistance: Initially:
≤ 30 mΩ
≤ 30 mΩ
≤ 20 mΩ
After life, at 10 mA, 50 mVdc, open circuit:
≤ 100 mΩ
≤ 100 mΩ
≤ 100 mΩ
Insulation Resistance:
Minimum, at 100 Vdc between adjacent closed
contacts and also across open switch contacts
Initially (Mohms):
5,000
1,000
5,000
1,000
5,000
1,000
After life (Mohms):
Dielectric Strength: Minimum voltage (AC,
RMS) measured between adjacent closed
contacts and also across open switch contacts.
lnitially:
750 V
500 V
750 V
500 V
500 V
500 V
After life:
Current Carry Rating: Maximum rise of 20°C
Switch Capacitance: At 1 megahertz
Operating Temperature Range:
5 A
4 A
3 A
2 pF
2 pF
2 pF
-40°C to + 85°C
-55°C to + 85°C
-40°C to + 85°C
-55°C to + 85°C
-40°C to + 85°C
-55°C to + 85°C
Storage Temperature Range:
Materials and Finishes
Shorting Member (Ball): Brass, gold-plated
over nickel barrier.
Base Contacts: Copper alloy, gold-plated
over nickel barrier.
Terminals: Copper alloy, matte tin plated over
nickel barrier.
Non-Conductive Parts: Thermoplastic (UL94V-O)
Potting Material: Epoxy, 76,78 only.
Protective Cover: 76,78, only-Polycarbonate.
Tape Seal:
Soldering Information
Mechanical Ratings
Series 90 MIDIP and Series 76 recessed rocker
(76RSBstyle)sealedswitcheshavebeentested
to EIA Standard RS-448-2. Similar performance
can be expected from other sealed Series 76
and 78 DIP switches.
Vibration Resistance: Per Method 204, Test
Condition B, 1 mS opening (10 mS allowed)
Mechanical Shock: Per Method 213, Test
Condition A. 1 mS opening (10 mS allowed)
Thermal Shock Resistance: Per specification;
no failures; passes contact resistance.
Terminal Strength: Per specification
Solderability: Per MIL-STD-202, Method 208
ResistancetoSolderingHeat:76RSB:Passes
EIA Standard using two, four, and six second
soldering time. 90: Per MIL-S-83504, six second
test.
ThermalAging:1,000hoursat85°C;nofailures.
Environmental Ratings
76, 78:
Polyester film
Fluxing: Per EIA RS-448-2 with flux touching
switch body.
Meets all requirements of MIL- S-83504. Where
Grayhill performance is superior, the MIL spec is
listed in parentheses.
90:
Polyimide film
Tape Seal Integrity: Passes gross leak test
using 125°C flourinert for 20 seconds minimum.
Reference MIL-STD-202, Method 112.
Cleaning: 76, 78 and 90 series tape sealed
products: Passes immersion test using water/
detergent. Acceptable solutions include 1-1-1
trichlorethane, freon, (TF, TE, or TMS), isopropyl
alcohol, detergent (140°F maximum). Terpene
acceptable for Series 90 only. Solutions which
arenotrecommendedincludeacetone,methylene
chloride, freon TMC.
Moisture Resistance: Per MIL-STD-202,
Method 106.
Recommended Soldering Conditions:
Reflow
Soldering
Profile:
REFLOW TEMPERATURE PROFILE:
MAX 260°
255°
230°
(260°C
Peak
Temperature)
150°
Room
Temperature
120-150 sec.
5-10 sec.
60 sec.
WAVE SOLDERING: 260°C maximum solder temperature for 5 seconds max.
DIP
14
Grayhill, Inc.
• 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明