GLS85LS1008C [GREENLIANT]

Industrial Temp SATA NANDrive;


型号：	GLS85LS1008C
厂家：	Greenliant
描述：	Industrial Temp SATA NANDrive
文件：	总8页 (文件大小：159K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

GLS85LS1008C / 1016C / 1032C / 1064C / 1128C

Industrial Temp SATA NANDrive™ MX Series

Preliminary Factsheet 02.100

January 2020

Features

• Industry Standard SATA Host Interface

• Expanded Data Protection

–

SATA 1.5Gb/s, 3Gb/s and 6Gb/s

SATA Revision 3.2

ATA/ATAPI-8 compliant

Supports 48-bit address feature set

Native Command Queuing (NCQ)

up to 32 commands

–

Added data security through user-selectable

protection zones

–

Secure Erase (data sanitization)

• 20-Byte Serial Number

–

Factory pre-programmed 10-Byte unique ID

–

User-programmable 10-Byte ID

• Performance

• Supports SMART and TRIM Commands

• Robust Built-in ECC

• Thermal Throttling

–

Sequential data read: Up to 410 MByte/sec

–

Sequential data write: Up to 115 MByte/sec

(128KB transfer size tested in VDBench on Linux)

• NAND Configuration

• Power Management

–

2 bits per cell (3D MLC NAND)

–

3.3V and 1.0V power supply

Host initialized power management (HIPM)

Device initialized power management (DIPM)

• Endurance

–

Program/Erase (P/E) Cycles: 5K

• Operating Temperature Range

• Power Specifications

–

Industrial: -40°C to 85°C

–

Active mode:

• BGA package

128GB: Up to 2860mW

64GB: Up to 1980mW

32GB: Up to 1540mW

16GB: Up to 1200mW

8GB: Up to 1200mW

Idle / Standby mode: <355mW

DevSleep mode: <70mW

–

14.0 mm x 24.0 mm x 1.40 mm, 145-ball,

1.0 mm ball pitch, LBJE (8GB, 16GB, 32GB,

64GB)

14.0 mm x 24.0 mm x 1.95 mm, 145-ball,

1.0 mm ball pitch, FZJE (128GB)

–

• All Devices are RoHS Compliant

Product Description

The GLS85LS1008C / 1016C / 1032C / 1064C /

1128C Industrial Temperature SATA NANDrive™

devices (referred to as “SATA NANDrive” in this

factsheet) are fully integrated solid state drives. They

combine an advanced Greenliant NAND controller

and 8, 16, 32, 64 or 128 GBytes of NAND flash in a

multi-chip package. These products are ideal for

embedded and portable applications that require small

form factor and reliable data storage.

The integrated NAND flash controller with built-in

advanced

NAND

management

firmware

communicates with the host through the standard

SATA protocol. It does not require any additional or

proprietary software such as the Flash File System

(FFS) and Memory Technology Driver (MTD).

SATA NANDrive is pre-programmed with a 10-Byte

unique serial ID and has the option of programming

an additional 10-Byte serial ID for even greater

system security.

Serial ATA (SATA)-interface solid state mass storage

technology is widely used in industrial PCs, single

board computers, servers, networking appliances,

HMI and digital signage displays, test and

SATA NANDrive’s advanced NAND management

technology enhances data reliability and security,

improves endurance and accurately estimates the

remaining life of the NAND flash devices. This

innovative technology combines robust NAND

controller hardware error correction capabilities with

advanced wear-leveling algorithms and bad block

management to significantly extend the life of the

product.

measurement

instrumentation,

multi-functional

printers, robotics, video equipment and security

systems.

SATA NANDrive is a single device, solid state drive

(SSD) that provides the functionality and compatibility

of a complete SATA hard disk drive (HDD) in a 14 mm

x 24 mm BGA package for easy, space saving

mounting to a system motherboard. These products

surpass traditional storage in their small size, security,

reliability, ruggedness and low power consumption.

SATA NANDrive devices are offered in a 145-ball

BGA, 1 mm ball pitch package.

These specifications are subject to change without notice.

01/03/2020

S71451-01

GLS FS0019 Rev. 00

GLS85LS1008C / 1016C / 1032C / 1064C / 1128C

Industrial Temp SATA NANDrive™ MX Series

Preliminary Factsheet 02.100

January 2020

1.0 GENERAL DESCRIPTION

Each SATA NANDrive contains an integrated SATA NAND flash memory controller and discrete NAND flash die

in a BGA package. Refer to Figure 2-1 for the SATA NANDrive block diagram.

1.1.5 Error Correction Code (ECC)

1.1 Optimized SATA NANDrive

The ECC technology uses advanced algorithms to

detect and correct errors, ensuring data integrity and

extending the SSD lifespan.

The heart of SATA NANDrive is the SATA NAND flash

memory controller which translates standard SATA

signals into flash media data and control signals. The

following components contribute to SATA NANDrive’s

operation.

1.1.6 Serial Communication Interface (SCI)

The Serial Communication Interface (SCI) is designed

for error reporting. During the product development

stage, it is recommended to provide the SCI port on

the PCB to aid in design validation.

1.1.1 Microcontroller Unit (MCU)

The MCU translates SATA commands into data and

control signals required for flash media operation.

1.1.7 Multi-tasking Interface

1.1.2 Internal Direct Memory Access (DMA)

The multi-tasking interface enables fast, sequential

write performance by allowing concurrent Read,

Program and Erase operations to multiple flash media.

SATA NANDrive uses internal DMA allowing instant

data transfer from/to buffer to/from flash media. This

implementation eliminates microcontroller overhead

associated with the traditional, firmware-based

approach, thereby increasing the data transfer rate.

1.2 SMT Reflow Consideration

Preprogrammed NAND devices have temperature

limits due to data retention. Using Greenliant’s

recommended reflow profile during production will

help prevent damage to the device and ensure better

retention of any preprogrammed data through the

surface-mount soldering process. See the relevant

datasheet section describing the recommended reflow

temperature limits.

1.1.3 Power Management Unit (PMU)

The PMU controls the power consumption of SATA

NANDrive. The PMU dramatically reduces the power

consumption of SATA NANDrive by putting the part of

the circuitry that is not in operation into sleep mode.

The Flash File System handles inadvertent power

interrupts and has auto-recovery capability to ensure

SATA NANDrive firmware integrity. For regular power

1.3 Advanced NAND Management

management,

the

host

must

send

SATA NANDrive’s integrated controller uses

advanced wear-leveling algorithms to substantially

increase the longevity of NAND flash media. Wear

caused by data writes is evenly distributed across all

or select blocks in the device to prevent “hot spots” in

locations that are programmed and erased extensively.

This effective wear-leveling technique results in

optimized device endurance, enhanced data retention

and higher reliability required by long-life applications.

STANDBY_IMMEDIATE (E0h), IDLE_IMMEDIATE

(E1h), STANDBY (E2h) or IDLE (E3h) command and

wait for the command-ready before powering down

SATA NANDrive.

1.1.4 Embedded Flash File System

The embedded flash file system is an integral part of

SATA NANDrive. It contains MCU firmware that

performs the following tasks:

1. Translates host side signals into flash media

writes and reads

2. Provides flash media wear leveling to spread

flash writes across all memory address space to

increase the longevity of flash media

3. Keeps track of the data file structure

4. Manages system security for the selected

protection zones

These specifications are subject to change without notice.

01/03/2020

S71451-01

GLS FS0019 Rev. 00

GLS85LS1008C / 1016C / 1032C / 1064C / 1128C

Industrial Temp SATA NANDrive™ MX Series

Preliminary Factsheet 02.100

January 2020

2.0

FUNCTIONAL BLOCKS

Figure 2-1: SATA NANDrive Block Diagram

These specifications are subject to change without notice.

01/03/2020

S71451-01

GLS FS0019 Rev. 00

GLS85LS1008C / 1016C / 1032C / 1064C / 1128C

Industrial Temp SATA NANDrive™ MX Series

Preliminary Factsheet 02.100

January 2020

2.0 APPENDIX

2.1 Product Ordering Information

GLS 85 LS 1 xxxC - M - C - xxJE - NDxxx

XX XX X XXXX - X - X - XXXX - XXXXX

Ordering Code ¹⁾

NDxxx = NANDrive Revision

EDxxx = Evaluation Board Revision

Environmental Attribute

E = non-Pb solder (RoHS Compliant)

Package Modifier

BJ / ZJ = 145-ball positions

Package Type

L = LBGA

F = FBGA

Operating Temperature

I = Industrial: -40°C to +85°C

NAND Configuration

M = 2 bits per cell

Product Generation

C = Generation

Capacity

008 = 8 GByte

016 = 16 GByte

032 = 32 GByte

064 = 64 GByte

128 = 128 GByte

GByte Designator

1 = GByte

Interface

S = SATA

Voltage

L = 3.3V

Product Family

85 = NANDrive

1) Note that the top side marking on the package typically does not include ordering codes (e.g. NDxxx), unless it is a special C-SPEC

(custom specification) which is required by the end-customer to be marked on the device.

These specifications are subject to change without notice.

01/03/2020

S71451-01

GLS FS0019 Rev. 00

GLS85LS1008C / 1016C / 1032C / 1064C / 1128C

Industrial Temp SATA NANDrive™ MX Series

Preliminary Factsheet 02.100

January 2020

Valid Combinations

Valid product combinations are those that are in the mass production, or will be in the mass production. Consult

your Greenliant sales representative to confirm availability of the valid combinations and to determine availability

of new product combinations.

Table 12-1: SATA NANDrive Product Valid Ordering Numbers

Capacity Operating Temperature

Part Number

Package

8GB

Industrial (-40°C to 85°C) GLS85LS1008C-M-I-LBJE-ND114

Industrial (-40°C to 85°C) GLS85LS1016C-M-I-LBJE-ND114

Industrial (-40°C to 85°C) GLS85LS1032C-M-I-LBJE-ND114

Industrial (-40°C to 85°C) GLS85LS1064C-M-I-LBJE-ND114

Industrial (-40°C to 85°C) GLS85LS1128C-M-I-FZJE-ND114

LBJE, 14x24x1.40mm

FZJE, 14x24x1.95mm

16GB

32GB

64GB

128GB

Table 12-2: SATA NANDrive Evaluation Board Valid Ordering Numbers

Capacity Operating Temperature Part Number

Form Factor

8GB

Industrial (-40°C to 85°C) GLS85LS1008C-M-I-1S-ED114

Industrial (-40°C to 85°C) GLS85LS1016C-M-I-1S-ED114

Industrial (-40°C to 85°C) GLS85LS1032C-M-I-1S-ED114

Industrial (-40°C to 85°C) GLS85LS1064C-M-I-1S-ED114

Industrial (-40°C to 85°C) GLS85LS1128C-M-I-1S-ED114

Module with SATA connector

16GB

32GB

64GB

128GB

These specifications are subject to change without notice.

01/03/2020

S71451-01

GLS FS0019 Rev. 00

GLS85LS1008C / 1016C / 1032C / 1064C / 1128C

Industrial Temp SATA NANDrive™ MX Series

Preliminary Factsheet 02.100

January 2020

2.2

ackage Diagrams

TOP VIEW

14.0

+/- 0.1

AA AB AC

24.0 ±0.1

CORNER

BOTTOM VIEW

0.5 +/- 0.05

(145x)

14.0

3.0

1.0

8.0

1.0

AA AB AC

SIDE VIEW

1mm

DETAIL

Note: All linear dimensions are in millimeters.

Untoleranced dimensions are nominal target values.

Coplanarity: 0.15 mm.

0.40 ±0.05

Ball opening size is 0.40 mm (± 0.05 mm).

1.25 ± 0.15

0.15

SEATING PLANE

Figure 12-2: SATA NANDrive 145-Ball, Ball Grid Array (BGA) Greenliant Package Code: LBJ

These specifications are subject to change without notice.

01/03/2020

S71451-01

GLS FS0019 Rev. 00

GLS85LS1008C / 1016C / 1032C / 1064C / 1128C

Industrial Temp SATA NANDrive™ MX Series

Preliminary Factsheet 02.100

January 2020

TOP VIEW

14.0

+/- 0.1

AA AB AC

24.0 ±0.1

CORNER

BOTTOM VIEW

0.5 +/- 0.05

(145x)

14.0

3.0

1.0

8.0

1.0

AA AB AC

SIDE VIEW

1mm

DETAIL

Note: All linear dimensions are in millimeters.

Untoleranced dimensions are nominal target values.

Coplanarity: 0.15 mm.

0.40 ±0.05

Ball opening size is 0.40 mm (± 0.05 mm).

1.80 ± 0.15

0.15

SEATING PLANE

Figure 12-2: SATA NANDrive 145-Ball, Ball Grid Array (BGA) Greenliant Package Code: FZJ

These specifications are subject to change without notice.

01/03/2020

S71451-01

GLS FS0019 Rev. 00

GLS85LS1008C / 1016C / 1032C / 1064C / 1128C

Industrial Temp SATA NANDrive™ MX Series

Preliminary Factsheet 02.100

January 2020

Revision History

Revision

02.000

Description

Initial release as Preliminary Factsheet

Updated height of LBJE package

Date

December 06, 2019

January 03, 2020

02.100

Greenliant and the Greenliant logo are registered trademarks, and NANDrive is a trademark of Greenliant. All

other trademarks and registered trademarks are the property of their respective owners.

Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable

capacity may be less.

Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant

Terms and Conditions of Sale.

www.greenliant.com

These specifications are subject to change without notice.

01/03/2020

S71451-01

GLS FS0019 Rev. 00

GLS85LS1008C [GREENLIANT]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E