首页 |元器件品牌

GLS85LS1008P-S-I-1S-K [GREENLIANT]

Industrial Grade SATA NANDrive;
GLS85LS1008P-S-I-1S-K
型号： GLS85LS1008P-S-I-1S-K
厂家： Greenliant    Greenliant
描述：

Industrial Grade SATA NANDrive
文件： 总8页 (文件大小：146K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
GLS85LS1002P / 1004P / 1008P  
Industrial Grade SATA NANDrive™  
Factsheet 04.100  
July 2018  
Features  
• Industry Standard Serial ATA (SATA) Host  
• Integrated Voltage Detector  
Detects supply voltage fluctuations and  
generates reset during power-up and power-  
down to prevent inadvertent writes  
• Supports SMART Commands  
Interface  
-
1)  
-
-
-
SATA 1.5Gb/s  
ATA/ATAPI-8 compliant  
Supports 48-bit address feature set  
• Expanded Data Protection  
• Performance  
-
Added data security through user-selectable  
protection zones  
-
Sequential data read:  
Up to 70 MByte/sec*  
-
Sequential data write:  
Up to 60 MByte/sec*  
* measured using 128 KByte transfer size  
• 20-Byte Serial Number  
-
-
Factory pre-programmed 10-Byte unique ID  
User-programmable 10-Byte ID  
• Power Management  
• Robust Built-in ECC  
• NAND Configuration  
-
-
-
3.3V and 1.2Vpower supply  
Host SATA interface power management  
Immediate disabling of unused circuitry  
-
1 bit per cell (SLC)  
• Industrial Temperature Range  
-40°C to 85°C  
• FBGA package  
14.0 mm x 24.0 mm x 1.95 mm, 145-ball,  
1.0 mm ball pitch, FZJE  
without host intervention  
• Power Specifications  
-
2)  
-
Active mode:  
-
750mW typical (GLS85LS1008P)  
560mW typical (GLS85LS1004P)  
450mW typical (GLS85LS1002P)  
• All Devices are RoHS Compliant  
-
-
Idle / Standby mode:  
Sleep mode:  
210mW typical  
70mW typical  
1) Current product revision supports SATA Revision 1.x with  
host transfer rate of up to 1.5 Gb/s (i.e. SATA 1.5Gb/s).  
2) For management of the Sleep Mode, refer to “SATA  
NANDrive Application Design Guide.”  
Product Description  
The GLS85LS1002P / 1004P / 1008P Industrial Grade  
SATA NANDrive™ devices (referred to as “SATA  
NANDrive” in this factsheet) are fully integrated solid  
state drives. They combine an advanced Greenliant  
NAND controller and 2, 4 or 8 GByte of NAND flash in  
a multi-chip package. These products are ideal for  
embedded and portable applications that require  
smaller form-factor and more reliable data storage.  
The integrated NAND flash controller with built-in  
advanced  
NAND  
management  
firmware  
communicates with the host through the standard  
SATA protocol. It does not require any additional or  
proprietary software such as the Flash File System  
(FFS) and Memory Technology Driver (MTD).  
SATA NANDrive is pre-programmed with a 10-Byte  
unique serial ID and has the option of programming  
an additional 10-Byte serial ID for even greater  
system security.  
SATA-interface solid state mass storage technology is  
widely used in portable and industrial computers, set-  
top boxes, multi-functional printers, point-of-sales  
terminals, video and audio recorders, medical  
instruments and car infotainment systems.  
SATA NANDrive’s advanced NAND management  
technology enhances data reliability and security,  
improves endurance and accurately estimates the  
remaining life of the NAND flash devices. This  
innovative technology combines robust NAND  
controller hardware error correction capabilities with  
advanced wear-leveling algorithms and bad block  
management to significantly extend the life of the  
product.  
SATA NANDrive is a single device, solid state drive  
(SSD) that provides the functionality and compatibility  
of a complete SATA hard disk drive (HDD) in a 14 mm  
x 24 mm BGA package for easy, space saving  
mounting to a system motherboard. These products  
surpass traditional storage in their small size, security,  
reliability, ruggedness and low power consumption.  
SATA NANDrive devices are offered in a 145-ball  
BGA, 1 mm ball pitch package.  
These specifications are subject to change without notice.  
© 2018 Greenliant  
07/10/2018  
S71432-F  
1
GLS85LS1002P / 1004P / 1008P  
Industrial Grade SATA NANDrive™  
Factsheet 04.100  
July 2018  
1.0  
GENERAL DESCRIPTION  
Each SATA NANDrive contains an integrated SATA NAND flash memory controller and up to eight discrete  
NAND flash die in a BGA package. Refer to Figure 2-1 for the SATA NANDrive block diagram.  
1.1.4 Embedded Flash File System  
1.1  
Optimized SATA NANDrive  
The embedded flash file system is an integral part of  
SATA NANDrive. It contains MCU firmware that  
performs the following tasks:  
The heart of SATA NANDrive is the SATA NAND flash  
memory controller which translates standard SATA  
signals into flash media data and control signals. The  
following components contribute to SATA NANDrive’s  
operation.  
1. Translates host side signals into flash media  
writes and reads  
1.1.1 Microcontroller Unit (MCU)  
2. Provides flash media wear leveling to spread the  
flash writes across all memory address space to  
increase the longevity of flash media  
The MCU translates SATA commands into data and  
control signals required for flash media operation.  
3. Keeps track of data file structures  
1.1.2 Internal Direct Memory Access (DMA)  
4. Manages system security for the selected  
protection zones  
SATA NANDrive uses internal DMA allowing instant  
data transfer from/to buffer to/from flash media. This  
implementation eliminates microcontroller overhead  
associated with the traditional, firmware-based  
approach, thereby increasing the data transfer rate.  
1.1.5 E rror C orrection C ode (E C C )  
High performance is achieved through optimized  
hardware error detection and correction.  
1.1.3 Power Management Unit (PMU)  
1.1.6 Serial Communication Interface (SCI)  
The PMU controls the power consumption of SATA  
NANDrive. The PMU dramatically reduces the power  
consumption of SATA NANDrive by putting the part of  
The Serial Communication Interface (SCI) is designed  
for error reporting. During the product development  
stage, it is recommended to provide the SCI port on  
the PCB to aid in design validation.  
3)  
the circuitry that is not in operation into sleep mode.  
1.1.7 Multi-tas king Interface  
The Flash File System handles inadvertent power  
interrupts and has auto-recovery capability to ensure  
SATA NANDrive firmware integrity. For regular power  
The multi-tasking interface enables fast, sequential  
write performance by allowing concurrent Read,  
Program and Erase operations to multiple flash media.  
management,  
the  
host  
must  
send  
a
STANDBY_IMMEDIATE (E0h), IDLE_IMMEDIATE  
(E1h), STANDBY (E2h) or IDLE (E3h) command and  
wait for command ready before powering down SATA  
NANDrive.  
1.2  
SMT Reflow Consideration  
The SATA NANDrive family utilizes standard NAND  
flash for data storage. Because the high temperature  
in a surface-mount soldering reflow process may alter  
the content on NAND flash, it is recommended to  
program SATA NANDrive after the reflow process.  
3) For management of the Sleep Mode, refer to “SATA  
NANDrive Application Design Guide.”  
1.3  
Advanced NAND Management  
SATA NANDrive’s integrated controller uses  
advanced wear-leveling algorithms to substantially  
increase the longevity of NAND flash media. Wear  
caused by data writes is evenly distributed in all or  
select blocks in the device that prevents “hot spots” in  
locations that are programmed and erased extensively.  
This effective wear-leveling technique results in  
optimized device endurance, enhanced data retention  
and higher reliability required by long-life applications.  
These specifications are subject to change without notice.  
© 2018 Greenliant  
07/10/2018  
S71432-F  
2
GLS85LS1002P / 1004P / 1008P  
Industrial Grade SATA NANDrive™  
Factsheet 04.100  
July 2018  
2.0  
FUNCTIONAL BLOCKS  
SATA NANDrive  
MCU  
NAND Controller  
Embedded Flash  
File System  
SATA ll  
HOST I/F  
3.0/1.5 Gbps  
SRAM Buffer  
Flash Media I/F  
NAND I/F  
ECC  
ECC  
NAND  
Flash  
Internal  
DMA  
PMU  
SCI  
Figure 2-1: SATA NANDrive Block Diagram  
These specifications are subject to change without notice.  
© 2018 Greenliant  
07/10/2018  
S71432-F  
3
GLS85LS1002P / 1004P / 1008P  
Industrial Grade SATA NANDrive™  
Factsheet 04.100  
July 2018  
3.0  
PR ODUC T OR DE R ING INFOR MATION  
GLS 85 LS 1 0xxP - S - I - FZJE - NDxxx  
XX XX X XXXX - X - X - XXXX - XXXXX  
Ordering Code 4)  
NDxxx or TTxxx = NANDrive revision  
Exxxx = Evaluation Board revision  
Environmental Attribute  
E = non-Pb solder (RoHS Compliant)  
Package Modifier  
ZJ = 145-ball positions  
Package Type  
F = FBGA  
Operation Temperature  
I = Industrial: -40°C to +85°C  
NAND Configuration  
S = 1 bit per cell  
Generation / Product Configuration  
P = First generation  
Capacity  
002 = 2 GByte  
004 = 4 GByte  
008 = 8 GByte  
MByte or GByte Designator  
0 = MByte  
1 = GByte  
Interface  
S = SATA  
Voltage  
L = 3.3V  
Product Series  
85 = NANDrive  
4) Note that the top side marking on the package typically does not include ordering codes (e.g. NDxxx), unless it is a special C-SPEC  
(custom specification) which is required by the end-customer to be marked on the device.  
These specifications are subject to change without notice.  
© 2018 Greenliant  
07/10/2018  
S71432-F  
4
GLS85LS1002P / 1004P / 1008P  
Industrial Grade SATA NANDrive™  
Factsheet 04.100  
July 2018  
Valid Combinations  
Valid product combinations are those that are in the mass production or will be in the mass production. Consult  
your Greenliant sales representative to confirm availability of the valid combinations and to determine availability  
of new product combinations.  
Table 3-1: SATA NANDrive Product Valid Ordering Numbers  
Capacity Operating Temperature  
Part Number  
Package  
2GB  
2GB  
2GB  
4GB  
4GB  
4GB  
8GB  
8GB  
8GB  
8GB  
Industrial (-40°C to 85°C) GLS85LS1002P-S-I-FZJE  
FZJE, 14x24x1.95mm  
FZJE, 14x24x1.95mm  
FZJE, 14x24x1.95mm  
FZJE, 14x24x1.95mm  
FZJE, 14x24x1.95mm  
FZJE, 14x24x1.95mm  
FZJE, 14x24x1.95mm  
FZJE, 14x24x1.95mm  
FZJE, 14x24x1.95mm  
FZJE, 14x24x1.95mm  
Industrial (-40°C to 85°C) GLS85LS1002P-S-I-FZJE-ND104  
Industrial (-40°C to 85°C) GLS85LS1002P-S-I-FZJE-TT095*  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-FZJE  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-FZJE-ND104  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-FZJE-TT095*  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-FZJE  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-FZJE-ND101  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-FZJE-ND104  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-FZJE-TT095*  
*
TT095 products include enhanced support for TRIM command and power management in Windows environments.  
Table 3-2: SATA NANDrive Evaluation Board Valid Ordering Numbers  
Capacity Operating Temperature Part Number  
Form Factor  
2GB  
2GB  
2GB  
4GB  
4GB  
4GB  
8GB  
8GB  
8GB  
8GB  
Industrial (-40°C to 85°C) GLS85LS1002P-S-I-1S-K  
Industrial (-40°C to 85°C) GLS85LS1002P-S-I-1S-ED104  
Industrial (-40°C to 85°C) GLS85LS1002P-S-I-1S-ET095  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-1S-K  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-1S-ED104  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-1S-ET095  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1S-K  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1S-ED101  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1S-ED104  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1S-ET095  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Form Factor  
Capacity Operating Temperature  
Part Number  
2GB  
2GB  
2GB  
4GB  
4GB  
4GB  
8GB  
8GB  
8GB  
8GB  
Industrial (-40°C to 85°C) GLS85LS1002P-S-I-1S-K  
Industrial (-40°C to 85°C) GLS85LS1002P-S-I-1S-ED104  
Industrial (-40°C to 85°C) GLS85LS1002P-S-I-1S-ET095  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-1S-K  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-1S-ED104  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-1S-ET095  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1S-K  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1S-ED101  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1S-ED104  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1S-ET095  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Module with SATA connector  
Table 3-3: SATA NANDrive miniSATA Evaluation Board Valid Ordering Numbers  
Capacity Operating Temperature  
Part Number  
Form Factor  
2GB Industrial (-40°C to 85°C) GLS85LS1002P-S-I-1MS-K  
JEDEC MO-300  
These specifications are subject to change without notice.  
© 2018 Greenliant  
07/10/2018  
S71432-F  
5
GLS85LS1002P / 1004P / 1008P  
Industrial Grade SATA NANDrive™  
Factsheet 04.100  
July 2018  
2GB  
4GB  
4GB  
8GB  
8GB  
8GB  
Industrial (-40°C to 85°C) GLS85LS1002P-S-I-1MS-ED104  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-1MS-K  
Industrial (-40°C to 85°C) GLS85LS1004P-S-I-1MS-ED104  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1MS-K  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1MS-ED101  
Industrial (-40°C to 85°C) GLS85LS1008P-S-I-1MS-ED104  
JEDEC MO-300  
JEDEC MO-300  
JEDEC MO-300  
JEDEC MO-300  
JEDEC MO-300  
JEDEC MO-300  
These specifications are subject to change without notice.  
© 2018 Greenliant  
07/10/2018  
S71432-F  
6
GLS85LS1002P / 1004P / 1008P  
Industrial Grade SATA NANDrive™  
Factsheet 04.100  
July 2018  
3.1  
Package Diagram  
TOP VIEW  
11  
10  
9
8
7
6
5
4
3
2
1
14.0  
+/- 0.1  
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA AB AC  
24.0 ±0.1  
A1  
CORNER  
BOTTOM VIEW  
0.5 +/- 0.05  
(145x)  
14.0  
3.0  
1
2
3
4
5
6
1.0  
8.0  
7
8
9
10  
11  
1.0  
E
A
B
C
D
F
G
H
J
K
L
M
N
P
R
T
U
V
W
Y
AA AB AC  
SIDE  
VIEW  
1mm  
DETAIL  
Note: All linear dimensions are in millimeters.  
Untoleranced dimensions are nominal target values.  
Coplanarity: 0.15 mm.  
0.40 ±0.05  
Ball opening size is 0.40 mm (± 0.05 mm).  
1.80 ± 0.15  
0.15  
SEATING PLANE  
Figure 3-1: SATA NANDrive 145-Ball, Ball Grid Array (BGA) Greenliant Package Code: FZJ  
These specifications are subject to change without notice.  
© 2018 Greenliant  
07/10/2018  
S71432-F  
7
GLS85LS1002P / 1004P / 1008P  
Industrial Grade SATA NANDrive™  
Factsheet 04.100  
July 2018  
Revision History  
Revision  
01.000  
01.001  
01.002  
02.000  
Description  
Initial release of Fact Sheet for GLS85LS1002P/1004P/1008P  
Updated Table 3-1  
Date  
October 17, 2011  
December 22, 2011  
March 12, 2012  
April 9, 2012  
Corrected typo in Table 3-1  
Added part numbers GLS85LS1016P/1032P and updated Section 1.2  
Separated part numbers GLS85LS1016P/1032P to document S71445-F  
Updated Table 3-1 and Section 4.0  
Removed Table 3-1  
Updated Power Specifications  
Added information for part number GLS85LS1008P-S-I-FZJE-ND104  
Added information for part numbers GLS85LS1002P-S-I-FZJE-ND104  
and GLS85LS1004P-S-I-FZJE-ND104  
Updated Section 1.1.3  
Added GLS85LS1002P/1004P/1008P part numbers with the TT095  
suffix  
02.100  
02.101  
02.200  
January 18, 2013  
April 17, 2013  
November 21, 2013  
03.000  
03.001  
04.000  
04.100  
February 25, 2014  
May 09, 2014  
October 19, 2016  
July 10, 2018  
Added Evaluation Board part numbers with the ET095 suffix  
© 2018 Greenliant. All rights reserved.  
Greenliant and the Greenliant logo are registered trademarks, and NANDrive is a trademark of Greenliant. All  
other trademarks and registered trademarks are the property of their respective owners.  
Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable  
capacity may be less.  
Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant  
Terms and Conditions of Sale.  
www.greenliant.com  
These specifications are subject to change without notice.  
© 2018 Greenliant  
07/10/2018  
S71432-F  
8

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明