GLS86FC016G8 [GREENLIANT]

Industrial Grade mSATA ArmourDrive EX Series;


型号：	GLS86FC016G8
厂家：	Greenliant
描述：	Industrial Grade mSATA ArmourDrive EX Series
文件：	总7页 (文件大小：433K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

GLS86FCxxxG1 / GLS86FCxxxG8

Industrial Grade mSATA ArmourDrive™ EX Series

Factsheet 02.000

January 2020

Features

• Industry Standard SATA Host Interface

• Reliability

Mean Time Between Failures (MTBF):

2 million hours*

• Expanded Data Protection

–

SATA 1.5Gb/s, 3Gb/s and 6Gb/s

SATA Revision 3.2

ATA/ATAPI-8 compliant

Supports 48-bit address feature set

Native Command Queuing (NCQ)

up to 32 commands

–

Added data security through user-selectable

protection zones

–

Secure Erase (data sanitization)

• Performance

• 20-Byte Serial Number

–

Sequential data read: Up to 470 MB/s

Sequential data write: Up to 340 MB/s

(measured using 128KB transfer size)

–

Factory pre-programmed unique ID

User-programmable 10-Byte ID

• Supports TRIM and SMART Commands

• Robust Built-in ECC

• Thermal Throttling

• Power Management

–

3.3V power supply

Host initialized power management (HIPM)

Device initialized power management (DIPM)

• NAND Configuration

–

1 bit per cell (SLC)

Designed with Greenliant’s advanced

EnduroSLC™ Technology

• Power Consumption

–

Active mode:

128GB: Up to 2180mW

64GB: Up to 1800mW

32GB: Up to 1980mW

16GB: Up to 1540mW

8GB: Up to 1200mW

4GB: Up to 1200mW

Idle / Standby mode: <355mW

DevSleep mode: <70mW

• High Endurance

–

GLS86FCxxxG1: 50K P/E cycles

GLS86FCxxxG8: 100K P/E cycles

• Operating Temperature Range

Industrial: -40°C to 85°C

• JEDEC standard MO-300 mSATA form factor

29.85 mm x 50.80 mm x 4.85 mm

–

• All Devices are RoHS Compliant

*Estimate based on preliminary component reliability data

Product Description

The GLS86FC004G1 / 008G1 / 016G1 / 032G1 /

064G1 / 128G1 / 008G8 / 016G8 / 032G8 / 064G8 /

128G8 Industrial Grade miniSATA (mSATA)

ArmourDrive™ EX Series modules (referred to as

“mSATA ArmourDrive” in this factsheet) are high-

endurance, high-reliability solid state drives. They

include a 4 8, 16, 32, 64 or 128 GByte SATA

NANDrive™ on a printed circuit board (PCB).

require any additional or proprietary software such as

the Flash File System (FFS) and Memory Technology

Driver (MTD). The firmware effectively optimizes the

use of NAND flash memory’s program/erase (P/E)

cycles and minimizes write amplification.

mSATA ArmourDrive is pre-programmed with a 10-

Byte unique serial ID and has the option of

programming an additional 10-Byte serial ID for even

greater system security.

mSATA ArmourDrive is ideal for applications that

require removable form factor and more reliable data

storage. mSATA solid state storage technology is

widely used in industrial computers, set-top boxes,

test and measurement instrumentation, multi-

functional printers, medical equipment, security and

surveillance systems, network servers and digital

signage. These removable solid state drives (SSDs)

surpass traditional hard disk drives (HDDs) in their

small size, security, reliability, ruggedness and low

power consumption.

mSATA ArmourDrive’s advanced NAND management

technology improves endurance, enhances data

security and helps prevent data corruption during

unexpected power failure events. This innovative

technology combines robust NAND flash controller

hardware error correction capabilities with advanced

wear-leveling algorithms and bad block management

to improve data reliability and significantly extend the

life of the product.

mSATA ArmourDrive is available in a standard

JEDEC 52-pin PCB module form factor.

The NAND flash controller with built-in advanced

NAND management firmware communicates with the

host through the standard SATA protocol. It does not

These specifications are subject to change without notice.

01/03/2020

S71468-01

GLS FS0019 Rev. 00

GLS86FCxxxG1 / GLS86FCxxxG8

Industrial Grade mSATA ArmourDrive™ EX Series

Factsheet 02.000

January 2020

1.0

GENERAL DESCRIPTION

Each mSATA ArmourDrive module contains a NANDrive multi-chip package, which integrates a SATA NAND

flash controller with discrete NAND flash die. Refer to Figure 2-1 for the mSATA ArmourDrive block diagram.

1.1.5 Error Correction Code (ECC)

1.1

Optimized mSATA ArmourDrive

The ECC technology uses advanced algorithms to

detect and correct errors, ensuring data integrity and

extending the SSD lifespan.

The heart of mSATA ArmourDrive is the SATA NAND

flash controller, which translates standard SATA

signals into flash media data and control signals. The

following

ArmourDrive’s operation.

components

contribute

mSATA

1.1.6 Multi-tasking Interface

The multi-tasking interface enables fast, sequential

write performance by allowing concurrent Read,

Program and Erase operations to multiple flash media.

1.1.1 Microcontroller Unit (MCU)

The MCU translates SATA commands into data and

control signals required for flash media operation.

1.2

Advanced NAND Management

1.1.2 Internal Direct Memory Access (DMA)

mSATA ArmourDrive’s controller uses advanced

wear-leveling algorithms to substantially increase the

longevity of NAND flash media. Wear caused by data

writes is evenly distributed in all or select blocks in the

device that prevents “hot spots” in locations that are

programmed and erased extensively. This effective

wear-leveling technique results in optimized device

endurance, enhanced data retention and higher

reliability required by long-life applications.

mSATA ArmourDrive uses internal DMA allowing

instant data transfer from/to buffer to/from flash media.

This implementation eliminates microcontroller

overhead associated with the traditional, firmware-

based approach, thereby increasing the data transfer

rate.

1.1.3 Power Management Unit (PMU)

The PMU controls the power consumption of mSATA

ArmourDrive. The PMU dramatically reduces the

power consumption of mSATA ArmourDrive by putting

the part of the circuitry that is not in operation into

sleep mode.

The Flash File System handles inadvertent power

interrupts and has auto-recovery capability to ensure

mSATA ArmourDrive firmware integrity. For regular

power management, the host must send an

IDLE_IMMEDIATE command and wait for command

ready before powering down mSATA ArmourDrive.

1.1.4 Embedded Flash File System

The embedded flash file system is an integral part of

mSATA ArmourDrive. It contains MCU firmware that

performs the following tasks:

1. Translates host side signals into flash media

writes and reads

2. Provides flash media wear leveling to spread

the flash writes across all memory address

space to increase the longevity of flash media

3. Keeps track of data file structures

4. Manages system security for the selected

protection zones

These specifications are subject to change without notice.

01/03/2020

S71468-01

GLS FS0019 Rev. 00

GLS86FCxxxG1 / GLS86FCxxxG8

Industrial Grade mSATA ArmourDrive™ EX Series

Factsheet 02.000

January 2020

2.0

FUNCTIONAL BLOCKS

Figure 2-1: mSATA ArmourDrive Block Diagram

These specifications are subject to change without notice.

01/03/2020

S71468-01

GLS FS0019 Rev. 00

GLS86FCxxxG1 / GLS86FCxxxG8

Industrial Grade mSATA ArmourDrive™ EX Series

Factsheet 02.000

January 2020

APPENDIX

3.0

3.1

Product Ordering Information

GLS 86 FC

XX XX

xxx Gx - I - BN0xx

XXX XX - X - XXXXX

Ordering Code

BN0xx = mSATA AmourDrive Revision

Operating Temperature

I = Industrial: -40°C to +85°C

NAND Configuration

1 = 1 bit per cell

8 = 1 bit per cell

GByte Designator

G = GByte

Capacity

004 = 4 GByte

008 = 8 GByte

016 = 16 GByte

032 = 32 GByte

064 = 64 GByte

128 = 128 GByte

Product Generation

C = Generation

Form Factor

F = Full length (mSATA)

Product Family

86 = mSATA ArmourDrive

These specifications are subject to change without notice.

01/03/2020

S71468-01

GLS FS0019 Rev. 00

GLS86FCxxxG1 / GLS86FCxxxG8

Industrial Grade mSATA ArmourDrive™ EX Series

Factsheet 02.000

January 2020

Valid Combinations

Valid product combinations are those that are in the mass production or will be in the mass production. Consult

your Greenliant sales representative to confirm availability of the valid combinations and to determine availability

of new product combinations.

Table 3-1:

Capacity

Operating Temperature

Part Number

Form Factor

4GB

Industrial (-40°C to 85°C)

GLS86FC004G1-I-BN007

GLS86FC008G1-I-BN007

GLS86FC008G8-I-BN008

GLS86FC016G1-I-BN007

GLS86FC016G8-I-BN008

GLS86FC032G1-I-BN007

GLS86FC032G8-I-BN008

GLS86FC064G1-I-BN007

GLS86FC064G8-I-BN008

GLS86FC128G1-I-BN007

GLS86FC128G8-I-BN008

JEDEC MO-300 (full length)

8GB

Industrial (-40°C to 85°C)

JEDEC MO-300 (full length)

16GB

32GB

64GB

128GB

These specifications are subject to change without notice.

01/03/2020

S71468-01

GLS FS0019 Rev. 00

GLS86FCxxxG1 / GLS86FCxxxG8

Industrial Grade mSATA ArmourDrive™ EX Series

Factsheet 02.000

January 2020

3.2

Board Diagrams

TOP VIEW

SIDE VIEW

BOTTOM VIEW

Note:

All dimensions are in millimeters, unless otherwise specified.

Tolerances on all dimensions are ± 0.15 mm, unless otherwise specified.

Figure 3-1: mSATA ArmourDrive Dimensions

These specifications are subject to change without notice.

01/03/2020

S71468-01

GLS FS0019 Rev. 00

GLS86FCxxxG1 / GLS86FCxxxG8

Industrial Grade mSATA ArmourDrive™ EX Series

Factsheet 02.000

January 2020

Revision History

Revision

01.000

Description

Date

Initial Release as Factsheet

Added 4 GByte product

August 06, 2019

January 03, 2020

02.000

Greenliant and the Greenliant logo are registered trademarks, and EnduroSLC, ArmourDrive and NANDrive are

trademarks of Greenliant. All other trademarks and registered trademarks are the property of their respective

owners.

Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable

capacity may be less.

Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant

Terms and Conditions of Sale.

www.greenliant.com

These specifications are subject to change without notice.

01/03/2020

S71468-01

GLS FS0019 Rev. 00

GLS86FC016G8 [GREENLIANT]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E