GLS86FC032G9-I-BN009 [GREENLIANT]
Industrial Grade mSATA ArmourDrive EX Series;型号: | GLS86FC032G9-I-BN009 |
厂家: | Greenliant |
描述: | Industrial Grade mSATA ArmourDrive EX Series |
文件: | 总6页 (文件大小:431K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GLS86FC008G9 / 016G9 / 032G9 / 064G9
Industrial Grade mSATA ArmourDrive™ EX Series
Factsheet 01.000
August 2019
Features
• Industry Standard mSATA Host Interface
• Expanded Data Protection
–
–
–
–
SATA 1.5Gb/s, 3Gb/s and 6Gb/s
SATA Revision 3.2
ATA/ATAPI-8 compliant
–
Added data security through user-selectable
protection zones
Secure Erase (data sanitization)
–
Supports 48-bit address feature set
• 20-Byte Serial Number
• Performance
–
–
Factory pre-programmed 10-Byte unique ID
User-programmable 10-Byte ID
–
–
Sequential data read: Up to 470 MByte/sec*
Sequential data write: Up to 340 MByte/sec*
* 128 KByte transfer size tested in VDBench on Linux
• Supports TRIM and SMART Commands
• Robust Built-in ECC
• Thermal Throttling
• Power Management
–
–
–
3.3V power supply
Host initialized power management (HIPM)
Device initialized power management (DIPM)
• Native Command Queuing (NCQ)
–
Up to 32 commands
• NAND Configuration
• Power Specifications
–
–
1 bit per cell (SLC)
Designed with Greenliant’s advanced
EnduroSLC™ Technology
–
Active mode:
64GB: Up to 2180mW
32GB: Up to 1800mW
16GB: Up to 1980mW
8GB: Up to 1540mW
Idle / Standby mode: <355mW (typical)
DevSleep mode: <70mW (typical)
• Ultra High Endurance
250K P/E cycles
• Operating Temperature Range
Industrial: -40°C to 85°C
• JEDEC standard MO-300 mSATA form factor
29.85 mm x 50.80 mm x 4.85 mm
–
–
–
–
• Reliability
Mean Time Between Failures (MTBF):
–
–
• All Devices are RoHS Compliant
More than 2 million hours**
** preliminary estimate
Product Description
The GLS86FC008G9 / 016G9 / 032G9 / 064G9
Industrial Grade miniSATA (mSATA) ArmourDrive™
EX Series modules (referred to as “mSATA
ArmourDrive” in this factsheet) are ultra-high
endurance, high-reliability solid state drives. They
include an 8, 16, 32 or 64 GByte SATA NANDrive™
on a printed circuit board (PCB).
the Flash File System (FFS) and Memory Technology
Driver (MTD). The firmware effectively optimizes the
use of NAND flash memory’s program/erase (P/E)
cycles and minimizes write amplification.
mSATA ArmourDrive is pre-programmed with a 10-
Byte unique serial ID and has the option of
programming an additional 10-Byte serial ID for even
greater system security.
mSATA ArmourDrive is ideal for applications that
require removable form factor and more reliable data
storage. mSATA solid state storage technology is
widely used in industrial computers, set-top boxes,
test and measurement instrumentation, multi-
functional printers, medical equipment, security and
surveillance systems, network servers and digital
signage. These removable solid state drives (SSDs)
surpass traditional hard disk drives (HDDs) in their
small size, security, reliability, ruggedness and low
power consumption.
mSATA ArmourDrive’s advanced NAND management
technology improves endurance, enhances data
security and helps prevent data loss during
unexpected power failure events. This innovative
technology combines robust NAND controller
hardware error correction capabilities with advanced
wear-leveling algorithms and bad block management
to improve data reliability and significantly extend the
life of the product.
mSATA ArmourDrive is available in a standard
JEDEC 52-pin PCB module form factor.
The NAND flash controller with built-in advanced
NAND management firmware communicates with the
host through the standard SATA protocol. It does not
require any additional or proprietary software such as
These specifications are subject to change without notice.
© 2019 Greenliant
08/12/2019
S71476-01
1
GLS86FC008G9 / 016G9 / 032G9 / 064G9
Industrial Grade mSATA ArmourDrive™ EX Series
Factsheet 01.000
August 2019
1.0
GENERAL DESCRIPTION
Each mSATA ArmourDrive module contains a NANDrive multi-chip package, which integrates a SATA NAND
flash memory controller with up to eight discrete NAND flash die. Refer to Figure 2-1 for the mSATA ArmourDrive
block diagram.
1.1.5 Error Correction Code (ECC)
1.1
Optimized mSATA ArmourDrive
The ECC technology uses advanced algorithms to
detect and correct errors, ensuring data integrity and
extending the SSD lifespan.
The heart of mSATA ArmourDrive is the SATA NAND
flash memory controller, which translates standard
SATA signals into flash media data and control
signals. The following components contribute to
mSATA ArmourDrive’s operation.
1.1.6 Multi-tasking Interface
The multi-tasking interface enables fast, sequential
write performance by allowing concurrent Read,
Program and Erase operations to multiple flash media.
1.1.1 Microcontroller Unit (MCU)
The MCU translates SATA commands into data and
control signals required for flash media operation.
1.2
Advanced NAND Management
1.1.2 Internal Direct Memory Access (DMA)
mSATA ArmourDrive’s controller uses advanced
wear-leveling algorithms to substantially increase the
longevity of NAND flash media. Wear caused by data
writes is evenly distributed in all or select blocks in the
device that prevents “hot spots” in locations that are
programmed and erased extensively. This effective
wear-leveling technique results in optimized device
endurance, enhanced data retention and higher
reliability required by long-life applications.
mSATA ArmourDrive uses internal DMA allowing
instant data transfer from/to buffer to/from flash media.
This implementation eliminates microcontroller
overhead associated with the traditional, firmware-
based approach, thereby increasing the data transfer
rate.
1.1.3 Power Management Unit (PMU)
The PMU controls the power consumption of mSATA
ArmourDrive. The PMU dramatically reduces the
power consumption of mSATA ArmourDrive by putting
the part of the circuitry that is not in operation into
sleep mode.
The Flash File System handles inadvertent power
interrupts and has auto-recovery capability to ensure
mSATA ArmourDrive firmware integrity. For regular
power management, the host must send an
IDLE_IMMEDIATE command and wait for command
ready before powering down mSATA ArmourDrive.
1.1.4 Embedded Flash File System
The embedded flash file system is an integral part of
mSATA ArmourDrive. It contains MCU firmware that
performs the following tasks:
1. Translates host side signals into flash media
writes and reads
2. Provides flash media wear leveling to spread the
flash writes across all memory address space to
increase the longevity of flash media
3. Keeps track of data file structures
4. Manages system security for the selected
protection zones
These specifications are subject to change without notice.
© 2019 Greenliant
08/12/2019
S71476-01
2
GLS86FC008G9 / 016G9 / 032G9 / 064G9
Industrial Grade mSATA ArmourDrive™ EX Series
Factsheet 01.000
August 2019
2.0
FUNCTIONAL BLOCKS
Figure 2-1: mSATA ArmourDrive Block Diagram
These specifications are subject to change without notice.
© 2019 Greenliant
08/12/2019
S71476-01
3
GLS86FC008G9 / 016G9 / 032G9 / 064G9
Industrial Grade mSATA ArmourDrive™ EX Series
Factsheet 01.000
August 2019
APPENDIX
3.0
3.1
Product Ordering Information
GLS 86 FC
XX XX
xxx G9 - I - BN0xx
XXX XX - X - XXXXX
Ordering Code
BN0xx = mSATA AmourDrive Revision
Operating Temperature
I = Industrial: -40°C to +85°C
NAND Configuration
9 = 1 bit per cell
GByte Designator
G = GByte
Capacity
008 = 8 GByte
016 = 16 GByte
032 = 32 GByte
064 = 64 GByte
Product Generation
C = Generation
Form Factor
F = Full length (mSATA)
Product Family
86 = mSATA ArmourDrive
Valid Combinations
Valid product combinations are those that are in the mass production or will be in the mass production. Consult
your Greenliant sales representative to confirm availability of the valid combinations and to determine availability
of new product combinations.
Table 3-1:
Capacity
Operating Temperature
Part Number
Form Factor
8GB
Industrial (-40°C to 85°C)
JEDEC MO-300 (full length)
GLS86FC008G9-I-BN009
16GB
32GB
64GB
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
Industrial (-40°C to 85°C)
JEDEC MO-300 (full length)
JEDEC MO-300 (full length)
JEDEC MO-300 (full length)
GLS86FC016G9-I-BN009
GLS86FC032G9-I-BN009
GLS86FC064G9-I-BN009
These specifications are subject to change without notice.
© 2019 Greenliant
08/12/2019
S71476-01
4
GLS86FC008G9 / 016G9 / 032G9 / 064G9
Industrial Grade mSATA ArmourDrive™ EX Series
Factsheet 01.000
August 2019
3.2
Board Diagrams
TOP VIEW
SIDE VIEW
BOTTOM VIEW
Note:
All dimensions are in millimeters, unless otherwise specified.
Tolerances on all dimensions are ± 0.15 mm, unless otherwise specified.
Figure 3-1: mSATA ArmourDrive Dimensions
These specifications are subject to change without notice.
© 2019 Greenliant
08/12/2019
S71476-01
5
GLS86FC008G9 / 016G9 / 032G9 / 064G9
Industrial Grade mSATA ArmourDrive™ EX Series
Factsheet 01.000
August 2019
Revision History
Revision History
Revision
Description
Date
01.000
Initial Release as Factsheet
August 12, 2019
© 2019 Greenliant. All rights reserved.
Greenliant and the Greenliant logo are registered trademarks, and ArmourDrive and NANDrive are trademarks
of Greenliant. All other trademarks and registered trademarks are the property of their respective owners.
Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable
capacity may be less.
Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant
Terms and Conditions of Sale.
www.greenliant.com
These specifications are subject to change without notice.
© 2019 Greenliant
08/12/2019
S71476-01
6
相关型号:
©2020 ICPDF网 联系我们和版权申明