GLS87CA016G1 [GREENLIANT]

Industrial Grade SATA M.2 ArmourDrive EX Series;


型号：	GLS87CA016G1
厂家：	Greenliant
描述：	Industrial Grade SATA M.2 ArmourDrive EX Series
文件：	总8页 (文件大小：247K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

GLS87AAxxxG1 / G8 and GLS87CAxxxG1 / G8

Industrial Grade SATA M.2 ArmourDrive™ EX Series

Factsheet 01.000

August 2019

Features

• Industry Standard M.2 SATA Host Interface

• Expanded Data Protection

–

SATA 1.5Gb/s, 3Gb/s and 6Gb/s

SATA Revision 3.2

ATA/ATAPI-8 compliant

–

Added data security through user-selectable

protection zones

Secure Erase (data sanitization)

–

Supports 48-bit address feature set

• 20-Byte Serial Number

• Performance

–

Factory pre-programmed unique ID

User-programmable 10-Byte ID

–

Sequential data read: Up to 470 MByte/sec*

Sequential data write: Up to 340 MByte/sec*

* 128 KByte transfer size tested in VDBench on Linux

• Supports TRIM and SMART Commands

• Robust Built-in ECC

• Native Command Queuing (NCQ)

• Power Management

–

3.3V power supply

Host initialized power management (HIPM)

Device initialized power management (DIPM)

–

Up to 32 commands

• NAND Configuration

–

1 bit per cell (SLC)

Designed with Greenliant’s advanced

EnduroSLC™ Technology

• Power Specifications

–

Active mode:

128GB: Up to 2180mW

64GB: Up to 1800mW

32GB: Up to 1980mW

16GB: Up to 1540mW

8GB: Up to 1200mW

• High Endurance

–

GLS87AAxxxG1 / GLS87CAxxxG1:

50K P/E cycles

GLS87AAxxxG8 / GLS87CAxxxG8:

100K P/E cycles

–

Idle mode: < 355mW (typical)

DevSleep mode: < 70mW (typical)

• Operating Temperature Range

Industrial: -40°C to 85°C

• M.2 2242 and 2280 Form Factors

–

• Thermal Throttling

• Reliability

–

22mm x 42mm x 2.38mm

22mm x 80mm x 2.38mm

Single-sided (SS), B+M key

–

Mean Time Between Failures (MTBF):

More than 2 million hours**

** preliminary estimate

• All Devices are RoHS Compliant

Product Description

The GLS87AA008G1 / 016G1 / 032G1 / 064G1 /

128G1/ 008G8 / 016G8 / 032G8 / 064G8 / 128G8

(2280 form factor) and GLS87CA008G1 / 016G1 /

032G1 / 064G1 / 128G1/ 008G8 / 016G8 / 032G8 /

064G8 / 128G8 (2242 form factor) Industrial Grade

SATA M.2 ArmourDrive™ EX Series modules

(referred to as “M.2 ArmourDrive” in this factsheet) are

high-endurance, high-reliability solid state drives.

They include an 8, 16, 32, 64 or 128 GByte SATA

NANDrive™ on a printed circuit board (PCB).

The NAND flash controller with built-in advanced

NAND management firmware communicates with the

host through the standard SATA protocol. It does not

require any additional or proprietary software such as

the Flash File System (FFS) and Memory Technology

Driver (MTD). The firmware effectively optimizes the

use of NAND flash memory’s program/erase (P/E)

cycles and minimizes write amplification.

M.2 ArmourDrive is pre-programmed with a 10-Byte

unique serial ID and has the option of programming

an additional 10-Byte serial ID for even greater

system security.

M.2 ArmourDrive is ideal for applications that require

removable form factor and more reliable data storage.

Serial ATA (SATA) M.2 solid state storage technology

is widely used in industrial computers, test and

M.2 ArmourDrive’s advanced NAND management

technology improves endurance, enhances data

security and prevents data loss during unexpected

power loss events. This innovative technology

combines robust NAND controller hardware error

correction capabilities with advanced wear-leveling

algorithms and bad block management to improve

data reliability and significantly extend the life of the

product.

measurement

instrumentation,

multi-functional

printers, medical equipment, security and surveillance

systems, network servers and digital signage. These

removable solid state drives (SSDs) surpass

traditional hard disk drives (HDDs) in their small size,

security, reliability, ruggedness and low power

consumption.

These specifications are subject to change without notice.

08/06/2019

S71470-01

GLS87AAxxxG1 / G8 and GLS87CAxxxG1 / G8

Industrial Grade SATA M.2 ArmourDrive™ EX Series

Factsheet 01.000

August 2019

1.0

GENERAL DESCRIPTION

Each M.2 ArmourDrive module contains a NANDrive multi-chip package, which integrates a SATA NAND flash

memory controller with discrete NAND flash die. Refer to Figure 2-1 for the M.2 ArmourDrive block diagram.

1.1.5

Error Correction Code (ECC)

1.1

Optimized M.2 ArmourDrive

The ECC technology uses advanced algorithms to

detect and correct errors, ensuring data integrity and

extending the SSD lifespan.

The heart of M.2 ArmourDrive is the SATA NAND

flash memory controller, which translates standard

SATA signals into flash media data and control

signals. The following components contribute to M.2

ArmourDrive’s operation.

1.1.6 Multi-tasking Interface

The multi-tasking interface enables fast, sequential

write performance by allowing concurrent Read,

Program and Erase operations to multiple flash media.

1.1.1 Microcontroller Unit (MCU)

The MCU translates SATA commands into data and

control signals required for flash media operation.

1.2

Advanced NAND Management

1.1.2 Internal Direct Memory Access (DMA)

M.2 ArmourDrive’s controller uses advanced wear-

leveling algorithms to substantially increase the

longevity of NAND flash media. Wear caused by data

writes is evenly distributed in all or select blocks in the

device that prevents “hot spots” in locations that are

programmed and erased extensively. This effective

wear-leveling technique results in optimized device

endurance, enhanced data retention and higher

reliability required by long-life applications.

M.2 ArmourDrive uses internal DMA allowing instant

data transfer from/to buffer to/from flash media. This

implementation eliminates microcontroller overhead

associated with the traditional, firmware-based

approach, thereby increasing the data transfer rate.

1.1.3 Power Management Unit (PMU)

The PMU controls the power consumption of M.2

ArmourDrive. The PMU dramatically reduces the

power consumption of M.2 ArmourDrive by putting the

part of the circuitry that is not in operation into sleep

mode.

The Flash File System handles inadvertent power

interrupts and has auto-recovery capability to ensure

mSATA ArmourDrive firmware integrity. For regular

power management, the host must send an

IDLE_IMMEDIATE command and wait for command

ready before powering down M.2 ArmourDrive.

1.1.4 Embedded Flash File System

The embedded flash file system is an integral part of

M.2 ArmourDrive. It contains MCU firmware that

performs the following tasks:

1. Translates host side signals into flash media

writes and reads

2. Provides flash media wear leveling to spread the

flash writes across all memory address space to

increase the longevity of flash media

3. Keeps track of data file structures

4. Manages system security for the selected

protection zones

These specifications are subject to change without notice.

08/06/2019

S71470-01

GLS87AAxxxG1 / G8 and GLS87CAxxxG1 / G8

Industrial Grade SATA M.2 ArmourDrive™ EX Series

Factsheet 01.000

August 2019

2.0

FUNCTIONAL BLOCKS

Figure 2-1: M.2 ArmourDrive Block Diagram

These specifications are subject to change without notice.

08/06/2019

S71470-01

GLS87AAxxxG1 / G8 and GLS87CAxxxG1 / G8

Industrial Grade SATA M.2 ArmourDrive™ EX Series

Factsheet 01.000

August 2019

APPENDIX

3.0

3.1

Product Ordering Information

GLS 87 xA

XX XX

xxx Gx - I - BN2xx

XXX XX - X - XXXXX

Ordering Code

BN2xx = SATA M.2 AmourDrive Revision

Operating Temperature

I = Industrial: -40°C to +85°C

NAND Configuration

1 = 1 bit per cell

8 = 1 bit per cell

GByte Designator

G = GByte

Capacity

008 = 8 GByte

016 = 16 GByte

032 = 32 GByte

064 = 64 GByte

128 = 128 GByte

Product Generation

A = Generation

Form Factor

A = M.2 2280 (SS)

C = M.2 2242 (SS)

Product Family

87 = SATA M.2 ArmourDrive

These specifications are subject to change without notice.

08/06/2019

S71470-01

GLS87AAxxxG1 / G8 and GLS87CAxxxG1 / G8

Industrial Grade SATA M.2 ArmourDrive™ EX Series

Factsheet 01.000

August 2019

Valid Combinations

Valid product combinations are those that are in the mass production or will be in the mass production. Consult

your Greenliant sales representative to confirm availability of the valid combinations and to determine availability

of new product combinations.

Table 3-1: M.2 2280 ArmourDrive Product Valid Ordering Numbers

Capacity

Operating Temperature

Part Number

Form Factor

GLS87AA008G1-I-BN200

GLS87AA008G8-I-BN201

GLS87AA016G1-I-BN200

GLS87AA016G8-I-BN201

GLS87AA032G1-I-BN200

GLS87AA032G8-I-BN201

GLS87AA064G1-I-BN200

GLS87AA064G8-I-BN201

GLS87AA128G1-I-BN200

GLS87AA128G8-I-BN201

8GB

Industrial (-40°C to 85°C)

2280 (SS), B+M key

16GB

32GB

64GB

128GB

Industrial (-40°C to 85°C)

2280 (SS), B+M key

Table 3-2: M.2 2242 ArmourDrive Product Valid Ordering Numbers

Capacity

Operating Temperature

Part Number

Form Factor

GLS87CA008G1-I-BN200

GLS87CA008G8-I-BN201

GLS87CA016G1-I-BN200

GLS87CA016G8-I-BN201

GLS87CA032G1-I-BN200

GLS87CA032G8-I-BN201

GLS87CA064G1-I-BN200

GLS87CA064G8-I-BN201

GLS87CA128G1-I-BN200

GLS87CA128G8-I-BN201

8GB

Industrial (-40°C to 85°C)

2242 (SS), B+M key

16GB

32GB

64GB

128GB

Industrial (-40°C to 85°C)

2242 (SS), B+M key

These specifications are subject to change without notice.

08/06/2019

S71470-01

GLS87AAxxxG1 / G8 and GLS87CAxxxG1 / G8

Industrial Grade SATA M.2 ArmourDrive™ EX Series

Factsheet 01.000

August 2019

3.2

Board Diagrams

BOTTOM VIEW

TOP VIEW

SIDE VIEW

Note:

All dimensions are in millimeters, unless otherwise specified.

Figure 3-1: M.2 2242 ArmourDrive Dimensions

These specifications are subject to change without notice.

08/06/2019

S71470-01

GLS87AAxxxG1 / G8 and GLS87CAxxxG1 / G8

Industrial Grade SATA M.2 ArmourDrive™ EX Series

Factsheet 01.000

August 2019

BOTTOM VIEW

TOP VIEW

SIDE VIEW

Note:

All dimensions are in millimeters, unless otherwise specified.

Figure 3-2: M.2 2280 ArmourDrive Dimensions

These specifications are subject to change without notice.

08/06/2019

S71470-01

GLS87AAxxxG1 / G8 and GLS87CAxxxG1 / G8

Industrial Grade SATA M.2 ArmourDrive™ EX Series

Factsheet 01.000

August 2019

Revision History

Revision

Description

Date

01.000

Initial Release as Factsheet

August 06, 2019

Greenliant and the Greenliant logo are registered trademarks, and ArmourDrive and NANDrive are trademarks

of Greenliant. All other trademarks and registered trademarks are the property of their respective owners.

Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable

capacity may be less.

Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant

Terms and Conditions of Sale.

www.greenliant.com

These specifications are subject to change without notice.

08/06/2019

S71470-01

GLS87CA016G1 [GREENLIANT]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E