GLS91CA032G9 [GREENLIANT]

Industrial Grade CFast ArmourDrive EX Series;
GLS91CA032G9
型号: GLS91CA032G9
厂家: Greenliant    Greenliant
描述:

Industrial Grade CFast ArmourDrive EX Series

文件: 总6页 (文件大小:119K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
GLS91CA008G9 / 016G9 / 032G9 / 064G9  
Industrial Grade CFast ArmourDrive™ EX Series  
Factsheet 01.000  
August 2019  
Features  
Industry Standard SATA Host Interface  
Expanded Data Protection  
SATA 1.5Gb/s, 3Gb/s and 6Gb/s  
SATA Revision 3.2  
ATA/ATAPI-8 compliant  
Supports 48-bit address feature set  
Added data security through user-selectable  
protection zones  
Secure Erase (data sanitization)  
20-Byte Serial Number  
Factory pre-programmed unique ID  
User-programmable 10-Byte ID  
Performance  
Sequential data read: Up to 470 MByte/sec*  
Sequential data write: Up to 340 MByte/sec*  
* 128 KByte transfer size tested in VDBench on Linux  
Supports TRIM and SMART Commands  
Robust Built-in ECC  
Thermal Throttling  
Power Management  
3.3V power supply  
Host initialized power management (HIPM)  
Device initialized power management (DIPM)  
Native Command Queuing (NCQ)  
Up to 32 commands  
NAND Configuration  
Power Specifications  
1 bit per cell (SLC)  
Designed with Greenliant’s advanced  
EnduroSLC™ Technology  
Active mode:  
64GB: Up to 2180mW  
32GB: Up to 1800mW  
16GB: Up to 1980mW  
8GB: Up to 1540mW  
Idle mode: < 355mW (typical)  
DevSleep mode: < 70mW (typical)  
Ultra High Endurance  
250K P/E cycles  
Operating Temperature Range  
Industrial: -40°C to 85°C  
CFast Card Form Factor  
36.40mm x 42.80mm x 3.60mm  
Reliability  
Mean Time Between Failures (MTBF):  
All Devices are RoHS Compliant  
More than 2 million hours**  
** preliminary estimate  
Product Description  
The GLS91CA008G9 / 016G9 / 032G9 / 064G9  
Industrial Temperature CFast ArmourDrive™ EX  
Series (referred to as “CFast ArmourDrive” in this  
factsheet) are ultra-high endurance, high-reliability  
storage cards. They include an 8, 16, 32 or 64 GByte  
SATA NANDrive™ in the standard CFast card form  
factor.  
The NAND flash controller with built-in advanced  
NAND management firmware communicates with the  
host through the standard SATA protocol. It does not  
require any additional or proprietary software such as  
the Flash File System (FFS) and Memory Technology  
Driver (MTD). The firmware effectively optimizes the  
use of NAND flash memory’s program/erase (P/E)  
cycles and minimizes write amplification.  
CFast ArmourDrive is ideal for applications that  
require hot-swappable, small form factor data storage  
with high shock-resistance. CFast cards are widely  
used in transportation systems, industrial automation,  
vending and gaming machines, medical computing,  
professional video and photo cameras, set-top boxes  
CFast ArmourDrive’s advanced NAND management  
technology improves endurance, enhances data  
security and helps prevent data loss during  
unexpected power failure events. This innovative  
technology combines robust NAND controller  
hardware error correction capabilities with advanced  
wear-leveling algorithms and bad block management  
to improve data reliability and significantly extend the  
life of the product.  
and point-of-sales  
(POS) equipment. These  
removable storage products surpass traditional hard  
disk drives (HDD) in their security, reliability,  
ruggedness and low power consumption.  
These specifications are subject to change without notice.  
© 2019 Greenliant  
08/23/2019  
S71483-01  
1
GLS FS0019 Rev. 00  
GLS91CA008G9 / 016G9 / 032G9 / 064G9  
Industrial Grade CFast ArmourDrive™ EX Series  
Factsheet 01.000  
August 2019  
1.0  
GENERAL DESCRIPTION  
Each CFast ArmourDrive contains a NANDrive multi-chip package, which integrates a SATA NAND flash memory  
controller with discrete NAND flash die, in a standard CFast card form factor housing. Refer to Figure 2-1 for the  
CFast ArmourDrive block diagram.  
1.1.5  
Error Correction Code (ECC)  
1.1  
Optimized CFast ArmourDrive  
The ECC technology uses advanced algorithms to  
detect and correct errors, ensuring data integrity and  
extending the SSD lifespan.  
The heart of CFast ArmourDrive is the SATA NAND  
flash memory controller, which translates standard  
SATA signals into flash media data and control  
signals. The following components contribute to CFast  
ArmourDrive’s operation.  
1.1.6 Multi-tasking Interface  
The multi-tasking interface enables fast, sequential  
write performance by allowing concurrent Read,  
Program and Erase operations to multiple flash media.  
1.1.1 Microcontroller Unit (MCU)  
The MCU translates SATA commands into data and  
control signals required for flash media operation.  
1.2  
Advanced NAND Management  
1.1.2 Internal Direct Memory Access (DMA)  
CFast ArmourDrive’s controller uses advanced wear-  
leveling algorithms to substantially increase the  
longevity of NAND flash media. Wear caused by data  
writes is evenly distributed in all or select blocks in the  
device that prevents “hot spots” in locations that are  
programmed and erased extensively. This effective  
wear-leveling technique results in optimized device  
endurance, enhanced data retention and higher  
reliability required by long-life applications.  
CFast ArmourDrive uses internal DMA allowing instant  
data transfer from/to buffer to/from flash media. This  
implementation eliminates microcontroller overhead  
associated with the traditional, firmware-based  
approach, thereby increasing the data transfer rate.  
1.1.3 Power Management Unit (PMU)  
The PMU controls the power consumption of CFast  
ArmourDrive. The PMU dramatically reduces the  
power consumption of CFast ArmourDrive by putting  
the part of the circuitry that is not in operation into  
sleep mode.  
The Flash File System handles inadvertent power  
interrupts and has auto-recovery capability to ensure  
mSATA ArmourDrive firmware integrity. For regular  
power management, the host must send an  
IDLE_IMMEDIATE command and wait for command  
ready before powering down CFast ArmourDrive.  
1.1.4 Embedded Flash File System  
The embedded flash file system is an integral part of  
CFast ArmourDrive. It contains MCU firmware that  
performs the following tasks:  
1. Translates host side signals into flash media  
writes and reads  
2. Provides flash media wear leveling to spread  
the flash writes across all memory address  
space to increase the longevity of flash media  
3. Keeps track of data file structures  
These specifications are subject to change without notice.  
© 2019 Greenliant  
08/22/2019  
S71483-01  
2
GLS91CA008G9 / 016G9 / 032G9 / 064G9  
Industrial Grade CFast ArmourDrive™ EX Series  
Factsheet 01.000  
August 2019  
2.0  
FUNCTIONAL BLOCKS  
Figure 2-1: CFast ArmourDrive Block Diagram  
These specifications are subject to change without notice.  
© 2019 Greenliant  
08/23/2019  
S71483-01  
3
GLS91CA008G9 / 016G9 / 032G9 / 064G9  
Industrial Grade CFast ArmourDrive™ EX Series  
Factsheet 01.000  
August 2019  
APPENDIX  
3.0  
3.1  
Product Ordering Information  
GLS 91 CA  
XX XX  
xxx Gx - I - BN6xx  
XXX XX - X - XXXXX  
Ordering Code  
BN6xx = CFast AmourDrive Revision  
Operating Temperature  
I = Industrial: -40°C to +85°C  
NAND Configuration  
9 = 1 bit per cell  
GByte Designator  
G = GByte  
Capacity  
008 = 8 GByte  
016 = 16 GByte  
032 = 32 GByte  
064 = 64 GByte  
Product Generation  
A = Generation  
Form Factor  
C = CFast card  
Product Family  
91 = CFast ArmourDrive  
Valid Combinations  
Valid product combinations are those that are in the mass production or will be in the mass production. Consult  
your Greenliant sales representative to confirm availability of the valid combinations and to determine availability  
of new product combinations.  
Table 3-1: CFast ArmourDrive Product Valid Ordering Numbers  
Capacity  
Operating Temperature  
Industrial (-40°C to 85°C)  
Industrial (-40°C to 85°C)  
Industrial (-40°C to 85°C)  
Industrial (-40°C to 85°C)  
Part Number  
Form Factor  
CFast Card  
CFast Card  
CFast Card  
CFast Card  
8GB  
GLS91CA008G9-I-BN602  
GLS91CA016G9-I-BN602  
GLS91CA032G9-I-BN602  
GLS91CA064G9-I-BN602  
16GB  
32GB  
64GB  
These specifications are subject to change without notice.  
© 2019 Greenliant  
08/23/2019  
S71483-01  
4
GLS91CA008G9 / 016G9 / 032G9 / 064G9  
Industrial Grade CFast ArmourDrive™ EX Series  
Factsheet 01.000  
August 2019  
Mechanical Diagrams  
3.2  
Note:  
All linear dimensions are in millimeters.  
Figure 3-1: CFast ArmourDrive Dimensions  
These specifications are subject to change without notice.  
© 2019 Greenliant  
08/23/2019  
S71483-01  
5
GLS91CA008G9 / 016G9 / 032G9 / 064G9  
Industrial Grade CFast ArmourDrive™ EX Series  
Factsheet 01.000  
August 2019  
Revision History  
Revision History  
Revision  
Description  
Date  
01.000  
Initial Release as Factsheet  
August 22, 2019  
© 2019 Greenliant. All rights reserved.  
Greenliant and the Greenliant logo are registered trademarks, and ArmourDrive and NANDrive are trademarks  
of Greenliant. All other trademarks and registered trademarks are the property of their respective owners.  
Specifications are subject to change without notice. Memory sizes denote raw storage capacity; actual usable  
capacity may be less.  
Greenliant makes no warranty for the use of its products other than those expressly contained in the Greenliant  
Terms and Conditions of Sale.  
www.greenliant.com  
These specifications are subject to change without notice.  
© 2019 Greenliant  
08/23/2019  
S71483-01  
6

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY