GRF2003 [GUERRILLA]

Broadband Gain Block 0.1â10.0 GHz;


型号：	GRF2003
厂家：	Guerrilla RF
描述：	Broadband Gain Block 0.1â10.0 GHz
文件：	总11页 (文件大小：709K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

Product Description

GRF2003 is a broadband, low noise linear gain block

designed for small cell, wireless infrastructure and other

high performance RF applications. A single match will

offer strong RF performance over 0.5 to 10.0 GHz. With

optimized external components, the device can be oper-

ated down to 100 MHz.

The device can be operated over a range of supply volt-

ages from 2.7 to 5.0 V with a typical Iddq range of 40 to

80 mA for optimal efficiency and linearity.

Features

Reference: 5V/55 mA/5.5 GHz

Consult with the GRF applications engineering team for

custom tuning/evaluation board data and device s-

parameters.

• Gain: 12.0 dB

• OP1dB: 15.0 dBm

• OIP3: 29.0 dBm

•

Eval Board NF: 3.5 dB

• Flexible Bias Voltage and Current

• Internally Matched to 50 Ω

• Process: GaAs pHEMT

Applications

• Microwave Backhaul

• C/X -Band Amplifiers

• General Purpose Amplifiers

• Instrumentation

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

Absolute Ratings:

Parameter

Symbol

Min.

Max.

6.0

Unit

Supply Voltage

VDD

RF Input Power: (Load VSWR < 2:1; V_D: 5.0 volts)

Operating Temperature (Package Heat Sink)

P_{IN MAX}

T_AMB

dBm

°C

-40

105

170

400

Maximum Channel Temperature

(MTTF > 10^6 Hours)

TMAX

°C

Maximum Dissipated Power

Electrostatic Discharge:

Charged Device Model:

Human Body Model:

Storage:

P_{DISS MAX}

CDM

HBM

1500

250

Storage Temperature

Moisture Sensitivity Level

T_STG

-65

150

°C

MSL

Cauꢀon! ESD Sensiꢀve Device

Exceeding Absolute Maximum Raꢀng condiꢀons may cause permanent damage to the device.

Note: For manufacturing informaꢀon, see the Guerrilla-RF.com website for the following docu-

ment located on the GRF2003 landing page: Manufacturing Note—MN-001 Product Tape and

Reel, Solderability and Package Outline Speciﬁcaꢀon.

Link to manufacturing note

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

Pin Out (Top View)

Pin Assignments:

Name

Description

Enable Voltage Input

Note

VENABLE and series resistor set IDDQ. VENABLE < 0.2 volts disables device. On-

VENABLE

die pull-down resistor will turn the part off if this node is allowed to float.

No Connect or Ground

LNA RF input

No internal connection to die

RF_In

RF_Out/VDD

Internally matched 50Ω. An external DC blocking cap must be used.

LNA RF output

Internally matched 50Ω. V_DDmust be applied through a choke to this pin

No Connect or Ground

Ground

No internal connection to die

Provides DC and RF ground for LNA, as well as thermal heat sink. Recom-

mend multiple 8 mil vias beneath the package for optimal RF and thermal

performance. Refer to evaluation board top layer graphic on schematic

page.

GND

PKG

BASE

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

Nominal Operating Parameters:

Specification

Typ.

Parameter

Symbol

Unit

Condition

Min.

Max.

Test Frequency

Gain

F_TEST

S21

5.5

12.0

3.5

GHz

V_DD= 5.0 V, T_A= 25°C

11.0

Eval Board Noise Figure

Output 3rd Order Intercept

Output 1dB Compression Point

Switching Rise Time

OIP3

OP1dB

T_RISE

T_FALL

I_DD

29.0

15.0

1600

1000

dBm

0 dBm P_OUTper tone at 2 MHz Spac-

ing (5499 and 5501 MHz)

12.5

Switching Fall Time

Supply Current

Enable Current

IENSABLE

ILEAKAGE

1.5

Leakage Current

VDD: 5.0V; VENABLE: 0.0V

Thermal Data

Thermal Resistance: (Infra-Red Scan)

198

ᵒC/W On standard Evaluation Board

jc

Channel Temperature @ +85 C Reference

(Package heat sink)

TCHANNEL

140

(See note)

ᵒC

VDD: 5.0 V; IDDQ: 55 mA; No RF;

PDISS: 275 mW

Note: MTTF >10^6 hours for TCHANNEL < =170 degrees C.

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

GRF2003 Measured Data: (5.0 volts; 55 mA)

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

GRF2003 Measured Data: (5.0 volts; 55 mA)

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

GRF2003 Evaluation Board S-Pars and Stability Mu Factor: (0.5 to 10.0 GHz Tune)

Note: Mu factor >= 1.0 implies unconditional stability.

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

GRF2003 Broadband Measurement Schematic

GRF2003 Evaluation Board Assembly Drawing

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

GRF2003 Bias Resistor Selection Curves

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

1.5 mm DFN-6 Suggested PCB Footprint (Top View)

1.5 mm DFN-6 Package Dimensions

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003

Preliminary

Broadband Gain Block

0.1—10.0 GHz

Data Sheet Release Status:

Advance

Notes

S-parameter and NF data based on EM simulations for the fully packaged device

using foundry supplied transistor s-parameters. Linearity estimates based on de-

vice size, bias condition and experience with related devices.

All data based on evaluation board measurements in the Guerrilla RF Applications

Lab.

Preliminary

Released

All data based on device qualification data. Typically, this data is nearly identical to

the data found in the preliminary version. Max and min values for key RF parame-

ters are included.

Informaꢀon in this datasheet is speciﬁc to the Guerrilla RF, Inc. (“Guerrilla RF”) product idenꢀﬁed.

This datasheet, including the informaꢀon contained in it, is provided by Guerrilla RF as a service to its customers and may be used for informaꢀonal purposes

only by the customer. Guerrilla RF assumes no responsibility for errors or omissions on this datasheet or the informaꢀon contained herein. Informaꢀon provided

is believed to be accurate and reliable, however, no responsibility is assumed by Guerrilla RF for its use, nor for any infringement of patents, or other rights of

third parꢀes, resulꢀng from its use. Guerrilla RF assumes no liability for any datasheet, datasheet informaꢀon, materials, products, product informaꢀon, or other

informaꢀon provided hereunder, including the sale, distribuꢀon, reproducꢀon or use of Guerrilla RF products, informaꢀon or materials.

No license, whether express, implied, by estoppel, by implicaꢀon or otherwise is granted by this datasheet for any intellectual property of Guerrilla RF, or any

third party, including without limitaꢀon, patents, patent rights, copyrights, trademarks and trade secrets. All rights are reserved by Guerrilla RF.

All informaꢀon herein, products, product informaꢀon, datasheets, and datasheet informaꢀon are subject to change and availability without noꢀce. Guerrilla RF

reserves the right to change component circuitry, recommended applicaꢀon circuitry and speciﬁcaꢀons at any ꢀme without prior noꢀce. Guerrilla RF may further

change its datasheet, product informaꢀon, documentaꢀon, products, services, speciﬁcaꢀons or product descripꢀons at any ꢀme, without noꢀce. Guerrilla RF

makes no commitment to update any materials or informaꢀon and shall have no responsibility whatsoever for conﬂicts, incompaꢀbiliꢀes, or other diﬃculꢀes

arising from any future changes.

GUERRILLA RF INFORMATION, PRODUCTS, PRODUCT INFORMATION, DATASHEETS AND DATASHEET INFORMATION ARE PROVIDED “AS IS” AND WITHOUT WAR-

RANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY,

PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. GUER-

RILLA RF DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATE-

RIALS. GUERRILLA RF SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSE-

QUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFOR-

MATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Customers are solely responsible for their use of Guerrilla RF products in the Customer’s products and applicaꢀons or in ways which deviate from Guerrilla RF’s

published speciﬁcaꢀons, either intenꢀonally or as a result of design defects, errors, or operaꢀon of products outside of published parameters or design speciﬁca-

ꢀons. Customers should include design and operaꢀng safeguards to minimize these and other risks. Guerrilla RF assumes no liability or responsibility for applica-

ꢀons assistance, customer product design, or damage to any equipment resulꢀng from the use of Guerrilla RF products outside of stated published speciﬁcaꢀons

or parameters.

Please contact Guerrilla RF at (+1) 336-510-7840 or sales@guerrilla-rf.com

Revision Date: 05/30/19

GRF2003 [GUERRILLA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E