GSIB610 [GULFSEMI]
SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current: 6.0A; 单相玻璃钝化整流桥电压： 50〜 1000V电流： 6.0A
| 型号： | GSIB610 |
| 厂家： | 
GULF SEMICONDUCTOR |
| 描述： | SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current: 6.0A |
| 文件： | 总2页 (文件大小：126K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
GSIB605 THRU GSIB6100
SINGLE PHASE GLASS
PASSIVATED BRIDGE RECTIFIER
Voltage: 50 to 1000V
6.0A
Current:
GSIB-5S
Features
Glass passivated chip junction
Ideal for printed circuit board
High surge current capability
High case dielectric strength
This series is UL listed under Recognized Component Index,
file number E185029
Mechanical Data
Terminal: Plated leads solderable per MIL-STD 202E,
Method 208C
Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
Polarity: Polarity symbol marked on body
Mounting position: any
Dimensions in millimeters
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
GSIB6 GSIB6 GSIB6 GSIB6 GSIB6 GSIB6 GSIB6
Symbol
units
05
10
20
40
60
80
100
1000
700
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Vrrm
Vrms
Vdc
50
35
100
70
200
140
200
400
280
400
600
420
600
800
560
800
V
V
V
Maximum DC blocking voltage
50
100
1000
6.0
2.8
Maximum average forward
Rectified output current at
Tc = 100℃(Note 1)
Ta = 25℃(Note 2)
If(av)
A
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage drop per
leg at 3.0A
Ifsm
Vf
180
0.95
120
A
V
I2t
Rating for fusing (t < 8.3ms)
A2Sec
10.0
250
22.0
3.4
Maximum DC reverse current at
rated DC blocking voltage per leg
Ta = 25°C
Ta = 125°C
Ir
µA
℃/W
℃
Maximum thermal resistance per leg
(Note2)
(Note1)
Rth(ja)
Rth(jc)
Tj, Tstg
-55 to +150
Operating junction and storage temperature range
Note:
1. Unit case mounted onAl plate heatsink
2. Unit case mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper peads and 0.375”(9.5mm) lead length
3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Rev.A7
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES GSIB605 THRU GSIB6100
Rev.A7
www.gulfsemi.com
相关型号：
GSIB620-E3
DIODE 2.8 A, 200 V, SILICON, BRIDGE RECTIFIER DIODE, LEAD FREE, PLASTIC, CASE GSIB-5S, 4 PIN, Bridge Rectifier Diode
VISHAY
GSIB620-E3/72
DIODE 2.8 A, 200 V, SILICON, BRIDGE RECTIFIER DIODE, PLASTIC, CASE GSIB-5S, 4 PIN, Bridge Rectifier Diode
VISHAY
GSIB620/45
Bridge Rectifier Diode, 1 Phase, 2.8A, 200V V(RRM), Silicon, PLASTIC, CASE GSIB-5S, 4 PIN
VISHAY
GSIB620/51
Bridge Rectifier Diode, 1 Phase, 2.8A, 200V V(RRM), Silicon, PLASTIC, CASE GSIB-5S, 4 PIN
VISHAY
GSIB620/51-E3
DIODE 2.8 A, 200 V, SILICON, BRIDGE RECTIFIER DIODE, PLASTIC, CASE GSIB-5S, 4 PIN, Bridge Rectifier Diode
VISHAY
GSIB620/72
Bridge Rectifier Diode, 1 Phase, 2.8A, 200V V(RRM), Silicon, PLASTIC, CASE GSIB-5S, 4 PIN
VISHAY
GSIB620/72-E3
DIODE 2.8 A, 200 V, SILICON, BRIDGE RECTIFIER DIODE, PLASTIC, CASE GSIB-5S, 4 PIN, Bridge Rectifier Diode
VISHAY
GSIB620E3
DIODE 2.8 A, 200 V, SILICON, BRIDGE RECTIFIER DIODE, LEAD FREE, PLASTIC, CASE GSIB-5S, 4 PIN, Bridge Rectifier Diode
VISHAY
©2020 ICPDF网 联系我们和版权申明