GDS-2202A [GWINSTEK]
300/200/100/70 MHz Digital Storage Oscilloscope;型号: | GDS-2202A |
厂家: | GWINSTEK |
描述: | 300/200/100/70 MHz Digital Storage Oscilloscope |
文件: | 总2页 (文件大小:737K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
300/200/100/70 MHz Digital Storage Oscilloscope
GDS-2000A Series
FEATURES
300/200/100/70MHz Bandwidth, 2 or 4
Input
Channels
2GSa/s Maximum Real-Time Sampling
Rate and 100GSa/s Equivalent Time
Sampling Rate
2M points Maximum Record length
VPO Technology to Display Less-
Frequently-Occurred Signals
Fast Update Rate of 80,000 Waveform
Per Second
Ethernet
Segmented Memory Acquisition and
Waveform Search Function
Standard Model Provides I C, UART,
SPI Serial Bus Trigger and Analysis
Functionality
The GDS-2000A Series DSO comes along with a high-value design framework,
including 2G Sa/s sampling rate, 2M points record length, 2 or 4 input channels
and a large screen color LCD display, to perform very fast waveform acquisition and
procession at 80,000 wfms/s update rate utilizing VPO (Visual Persistence
Oscilloscope) technology.
Optional 8 or 16 Additional Digital
Channels with Logic Analyzer(MSO)
Upgradable CAN/LIN Bus, DVM,
H-Expansion, Data Log and Advanced
Logic Functionality
The GDS-2000A Series, carrying bandwidths of 300MHz, 200MHz, 100MHz and
70MHz and inputs of 2 and 4 channels, makes up a family of 8 in the whole series.
The 2M points record length not only enables the long time waveform storage but
also plays the role as a huge database of the input signals for the post-storage
waveform analysis. Two powerful functions, Waveform Search and Segmented
Memory are available of the GDS-2000A Series to facilitate the search the event of
interest from the long record length. Waveform search defines the waveform types
for the search whereas segmented memory divides the whole record length into a
number of segments. Therefore, the process of searching particular waveforms can
be easier and faster.
Optional 5MHz & 25MHz Function Generator
Flexible Remote Control Connectivity
(Standard : USB ; Optional : LAN/GPIB)
The ping-pong waveform acquisition design and the advanced VPO-technology-
based waveform procession system, greatly enhance the speed and the quality of
waveform display of GDS-2000A Series at a very fast update rate of 80,000
waveforms per second, GDS-2000A also provides I2C, UART, SPI serial bus trigger
and decoding functionalities free of charge. Users via GDS-2000A not only to
measure basic waveform but also available to analysis the low speed serial bus.
Front
The optional logic analyzer function allows the signal acquisition through logic
triggering and enables the logic waveforms and the analog waveforms to be shown
on the same screen for comparison and time correlation analysis. This Mixed
Signal Oscilloscope (MSO) function is field-installable with a plug-in module,
containing either 8 or 16 input channels, at the rear panel. The MSO function
supports the I2C / SPI / UART serial bus trigger and decoding.
Rear Panel
APPLICATIONS
Industrial and Educational R&D Labs
Product Testing and Quality Assurance
Embedded System and Mix Signal Design
System Integration & Debugging
Maintenance & Repair Service
The GDS-2000A Series is equipped with all the features that a high-tech DSO should
have today. The RS-232C interface, USB ports, and Go-NoGo output are provided as
standard, and the Ethernet port, SVGA Video output and GPIB port are available as
options for user's free selection. At a moderate cost, GDS-2000A Series is a DSO to
provide high customer-value with innovative design.
Simply Reliable
GDS-2000A Series
SPECIFICATIONS
GDS-2072A GDS-2074A GDS-2102A GDS-2104A GDS-2202A GDS-2204A GDS-2302A GDS-2304A
2Ch+EXT 4Ch+EXT 2Ch+EXT 4Ch+EXT 2Ch+EXT 4Ch+EXT 2Ch+EXT 4Ch+EXT
VERTICAL SENSITIVITY
Channels
Bandwidth
Rise Time
Bandwidth Limit
DC~70MHz(-3dB)
5ns
20MHz
DC~100MHz(-3dB)
3.5ns
20MHz
DC~200MHz(-3dB)
1.75ns
20M/100MHz
DC~300MHz(-3dB)
1.17ns
20M/100M/200MHz
Vertical Resolution
Input Coupling
Input Impedance
8 bits@1M : 1mV*~10V ( * : When the vertical scale is set to 1mV/div, the bandwidth limit will be set to 20MHz automatically)
AC, DC, GND
1MΩ// 16pF approx.
(3% X |Readout| + 0.1div + 1mV) when 2mV/div or greater is selected ; (5% X |Readout| + 0.1div + 1mV) when 1mV/div is selected
DC Gain Accuracy
(**)
( ** : The measurement type is average of 16 waveforms with vertical position at zero)
Normal , Invert
Polarity
Maximum Input Voltage
Offset Position Range
Process + , - , × , ÷ , FFT , FFTrms , d/dt(Differentiation*)
Waveform Signal
300Vrms , CAT I (300Vrms CAT II with GTP-150A-2/250A-2/350A-2 10:1 probe)
1mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 25V ; 5V/div~10V/div : 250V
, dt( Integration*) ,
FFT : Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming,
Hanning, or Blackman-Harris.
Source
Trigger Mode
Trigger Type
Ch1 ,CH2, CH3*, CH4*, Line, EXT, D0-D7 or D0-D15** ; *four channel models only. **Logic analyzer option only.
Auto (Supports Roll Mode for 100 ms/div and slower), Normal, Single Sequence
Edge, Pulse Width(Glitch), Video, Pulse Runt, Rise & Fall(Slope), Alternate, Glitch Trigger, Duration Trigger, Slope Trigger,
Time out, Event-Delay(1~65,535 events), Time-Delay(Duration;10ns~10s), Logic*, Bus* , *with DS2-08LA or DS2-16LA option
10ns ~ 10s
AC, DC, LF rej. , Hf rej. , Noise rej.
DC ~ 100MHz Approx. 1div or 1.0mV ; 100MHz ~ 200MHz Approx. 1.5div or 15mV ;
200MHz ~ 300MHz Approx. 2div or 20mV
TRIGGER
Trigger Holdoff Range
Coupling
Sensitivity
Range
Sensitivity
15V
DC ~ 100MHz Approx. 100mV
100MHz ~ 200MHz Approx. 150mV ; 200MHz ~ 300MHz Approx. 150mV
1MΩ 3%, ~16pF
EXT TRIGGER
HORIZONTAL
Input Impedance
Time Base Range
Pre-trigger
Post-trigger
Time Base Accuracy
Real Time Sample Rate
1ns/div ~ 100s/div (1-2-5 increments); ROLL : 100ms/div ~ 100s/div
10 div maximum
1,000 div max ( depend on time base )
20 ppm over any 1 ms time interval
Max. : 2GSa/s
ET Sample Rate
Record Length
Acquisition Mode
Peak Detection
Average
100GSa/s maximum for all models
Max. : 2Mpts
Normal, Average, Peak Detect, Single Sequence
2ns (typical)
Selectable from 2 to 256
X-Y MODE
X-Axis Input
Y-Axis Input
Phase Shift
Channel 1 ; Channel 3* ( * : four channel models only )
Channel 2 ; Channel 4* ( * : four channel models only )
3° at 100kHz
CURSORS AND
MEASUREMENT
Cursors
Automatic Measurement 36 sets: Pk-Pk, Max, Min, Amplitude, High, Low, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot, RPREShoot, FPREShoot,
Amplitude, Time, Gating Available; Unit : Seconds(S), Hz(1/S), Phase (Degrees), Ratio(%)
Frequency, Period, RiseTime, FallTime, +Width, -Width, Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase
Cursors measurement
6 digits, range from 2Hz minimum to the rated bandwidth
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo Autoset
Control Panel Function
Auto Counter
Autoset
20set
24set
Save Setup
Save Waveform
DISPLAY SYSTEM
TFT LCD Type
Display Resolution
Interpolation
Waveform Display
Waveform Update Rate
Display
8" TFT LCD SVGA color display(LED Back-light)
800 horizontal x 600 vertical pixels (SVGA)
Sin(x)/x & Equivalent time sampling
Dots, Vectors, Variable persistence(16ms~10s), Infinite persistence
80,000 waveforms per second, maximum
Display mode : YT ; XY
Display Graticule
8 x 10 divisions
RS-232C
USB Port
Ethernet Port (LAN)
SVGA Video Port
GPIB
DB-9 male connector
INTERFACE
USB 2.0 Full-speed host port, USB 2.0 Full-speed device port
RJ-45 connector, 10/100Mbps with HP Auto-MDIX (option)
SVGA output (option)
GPIB module (option)
5V Max/10mA TTL open collector output
Rear-panel security slot connects to standard Kensington-style lock
Go/NoGo BNC
Kensington Style Lock
LOGIC ANALYZER
(OPTION)
Sample Rate
Bandwidth
500MSa/s
200MHz
Record Length
Input Channels
Trigger Type
Thresholds
2M max
16 Digital (D15 - D0) or 8 Digital (D7~D0)
Edge, Pattern, Pulse Width, Serial bus (I2C, SPI, UART), Parallel
Quad-D0 ~ D3, D4 ~ D7. . . . Thresholds D8~D11*, D12~D15* (*: DS2-16LA only)
Threshold Selections
Threshold Accuracy
User-defined Threshold Range
Maximum Input Voltage
Minimum Voltage Swing
Input Impedance
Vertical Resolution
TTL, CMOS, ECL, PECL, User Defined
100mV
10V
40V
500mV
101KΩ probe loading 8 pF
1 bit
Temperature
0 C ~ 50 C, Relative Humidity 80% at 40 C or below ; 45% at 41 C~50 C
OPERATING ENVIRONMENT
POWER SOURCE
MISCELLANEOUS
Line Voltage Range
Multi-Language Menu
On-Line Help
AC 100V ~ 240V, 48Hz ~ 63Hz, auto selection
Available
Available
Time and date, provide the date/time for saved data
Time clock
DIMENSIONS & WEIGHT 380(W) X 220(H) X 145(D)mm, Approx. 4.2 kg
Specifications subject to change without notice.
Note : Three-year warranty, excluding probes & LCD display panel.
BH-2000AGD4BH
OPTION
ORDERING INFORMATION
DS2-16LA 16-Channel Logic Analyzer includes
DS2-LAN
DS2-GPIB
DS2-FGN
Ethernet & SVGA output
GPIB Interface
DDS Function Generator
16 Channel Logic Analyzer Card(GLA-16)
16-Channel Logic Analyzer Probe(GTL-16LA)
8-Channel Logic Analyzer : includes
GDS-2304A
300MHz, 4-Channel, Digital Storage Oscilloscope
DS2-08LA
GDS-2302A 300MHz, 2-Channel, Digital Storage Oscilloscope
AFG-125 25MHz Single channel USB Modular Arbitrary Function Generator
AFG-225 25MHz Dual channel USB Modular Arbitrary Function Generator
8-Channel Logic Analyzer Card(GLA-08)
8-Channel Logic Analyzer Probe(GTL-08LA)
GDS-2204A
GDS-2202A
GDS-2104A
GDS-2102A
200MHz, 4-Channel, Digital Storage Oscilloscope
200MHz, 2-Channel, Digital Storage Oscilloscope
100MHz, 4-Channel, Digital Storage Oscilloscope
100MHz, 2-Channel, Digital Storage Oscilloscope
70MHz, 4-Channel, Digital Storage Oscilloscope
70MHz, 2-Channel, Digital Storage Oscilloscope
OPTION ACCESSORIES
8-Channel Logic Analyzer Probe
16-Channel Logic Analyzer Probe
8-Channel Logic Analyzer Card
16-Channel Logic Analyzer Card
Rack Adapter Panel
GTL-08LA
GTL-16LA
GLA-08
GLA-16
GRA-420
GAK-003
GDB-03
Oscilloscope Education & Training Kit
GCP-005 Current Probe, 40Hz ~ 1kHz, 5A, Current Probe
GCP-020 Current Probe, DC ~ 100KHz, 10A, Current Probe
GCP-100 Current Probe, 40Hz ~ 10KHz, 20A, Current Probe
GCP-1030 Current Probe, DC ~ 100MHz, 30Arms, Current probe
GCP-206P Current Probe - Power Supply, 2 Channel Power Supply for GCP-530/1030
GCP-245P Current Probe - Power Supply, 4 Channel Power Supply for GCP-530/1030
GCP-530 Current Probe, DC ~ 50MHz, 30Arms, Current Probe
GDP-025 Differential Probe, 25M High Voltage Differntial Probe
GDP-050 Differential Probe, 50M High Voltage Differntial Probe
GDP-100 Differential Probe, 100M High Voltage Differntial Probe
GTP-033A Oscilloscope Probe, 35MHz 1:1 Passive Probe, BNC(P/M)
GDS-2074A
GDS-2072A
50 Impedance Adapter
DS2-FH1 Module extension bay & USB Type A to Type A/B cable
Soft Carrying Case
ACCESSORIES
Quick start guide , User manual CD x 1, Power cord x 1
GTP-070B-4 :70MHz (10:1/1:1) Switchable passive probe for GDS-2072A/2074A(one per channel)
GTP-150A-2 :150MHz (10:1/1:1) Switchable passive probe for GDS-2102A/2104A(one per channel)
GTP-250A-2 :250MHz (10:1/1:1) Switchable passive probe for GDS-2202A/2204A(one per channel)
GTP-350A-2 :350MHz (10:1/1:1) Switchable passive probe for GDS-2302A/2304A(one per channel)
GSC-008
GTL-232 RS-232C Cable, 9-pin, F-F Type, null modem, 2000mm
GTL-246 USB Cable, USB 2.0, A-B Type, 1200mm
GTL-248 GPIB Cable, Double Shielded, 2000mm
GTL-251 USB-GPIB Adapter, GPIB-USB-HS, USB 2.0, Hi-Speed
USB compliance, 2000mm
FREE DOWNLOAD
PC Software
Driver
USB driver ; LabView driver
FreeWave software
GOOD WILL INSTRUMENT CO., LTD.
No.7-1, Jhongsing Road, Tucheng Dist., New Taipei City 236, Taiwan
T +886-2-2268-0389 F +886-2-2268-0639
www.gwinstek.com
Simply Reliable
相关型号:
©2020 ICPDF网 联系我们和版权申明