GDS-2204 [GWINSTEK]

200MHz/100MHz/60MHz Digital Storage Oscilloscope;


型号：	GDS-2204
厂家：	GWINSTEK
描述：	200MHz/100MHz/60MHz Digital Storage Oscilloscope
文件：	总2页 (文件大小：469K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

200MHz/100MHz/60MHz Digital Storage Oscilloscope

GDS-2000 Series

FEATURES

200/100/60 MHz Bandwidth

2 or 4 Input Channels

1GSa/s Real-Time and 25GSa/s Equivalent-

Time Sampling

25k Points Record Length Maximum

Large 5.6-in TFT Color Display

Summary of features

Data Transfer and Printout

USB Host/Device: Support USB Printer and

USB Flash Drive

Rich selections of bandwidth and channel, 200/

100/60MHz and 2/4ch, cover major applications

in laboratories, production lines, or field services.

1GSa/s high sampling rate and 25k point deep

memory give much detailed view into the target

waveforms , keeping high sampling rate . USB

host and slave connection allows data save and

recall, screen image printout, and remote control.

TFT color LCD display with wide viewing angle

eliminates obscurity in any situation . Battery

operation option gives a much-desired mobility

in rapidly changeable environments.

USB host connector transfers data quickly and

easily between USB flash drive, which guarantees

almost unlimited amount of memory. Internal

storage includes 4 sets of reference waveform

and 20 sets of general-use memory area. GDS-

2000 Series handle three types of data : display

image (*.bmp) for viewing waveform shape and

pasting into documents and presentations,panel

setting (*.set) for saving and restoring system

setup, and waveform configuration (*.csv) for

further analysis of signal information. Printout

of display image, color or grayscale, is available

through the printer connected to the USB host

port. You can set the printout or data saving

preference to allow a single-press operation for

consecutive works.

Battery Operation (optional)

Color Printout

Signal Detection

GDS-2000 Series pick up signals even in the most

extreme cases, powered by 1GSa/s real time and

25GSa/s equivalent sampling rate combined with

3 types of acquisition modes: sample, peak detect,

and average. 25k points of deep memory collects

more information of a given waveform, guiding

us into further signal details. 4 types of flexible

triggers add another signal capturing flexibility:

edge , video ( NTSC, PAL, SECAM ) with line

selection, pulse-width, and delay/event using

external trigger signal ( for 2CH models ).

Setup Recovery and Transfer

1GSa/s Real-Time

Sampling

4CH Selection

The last panel setting is internally stored in

nonvolatile memory, ready to be recovered on

the next power up . When the measurement

environment frequently changes, or if you want

to transfer the setup to another GDS-2000 Series,

switching between multiple system settings is

done by saving and recalling setup files (*.set)

Using USB flash drive . When the setup gets

complicated, you can always recover the default

system setting in a simple two-step operation.

Measurement Functions

A variety of measurement shortcuts reduce

repetitive manual operations and save your

precious time. Autoset automatically configures

the horizontal scale , the vertical scale , and the

trigger , giving an instant view of almost any

signal . 27 types of automatic measurements

include voltage , frequency ( time ) , and delay .

GDS-2000 Series run and update results of all

the relevant measurements in real time. You can

view the results independently , or together in a

single display view . Add and subtract math

operation, with 4 types of FFT are also provided :

flattop , blackman , hanning , and rectangular .

Go/NoGo test function detects a user-defined

incoming waveform shape, and can also send a

signal to external devices in case of detection.

Program and play feature automatically runs

predefined sequence and setup , boosting

Remote Access

USB Flash Drive

Battery Operation

(Optional)

IEEE based remote control commands include

most of the panel operations and the syntax

conforms to universally accepted IEEE 488.2

standard . Proprietary PC software with GUI

operation, downloadable from GW Instek website,

allows you to use your familiar mouse & keyboard,

utilizing the larger PC screen. Three types of

remote control interface with flexible connection

settings are provided: USB device, RS-232, and

APPLICATIONS

Education Lab and Training Institution

Production Test and Quality Inspection

Repair and After-Service

GPIB (optional).

Portability

Battery operation option with typ . 3 hours of

running time gives a much-desired mobility.

built-in self-calibration and probe compensation

help maintaining maximum accuracy even when

environment or testing accessories changes .

Circuit Design and Debug

productivity in routine measurements like Language support helps you collaborating in

production line inspection.

multicultural working environments.

SPECIFICATIONS

GDS-2062/2064

GDS-2102/2104

GDS-2202/2204

VERTICAL

2/4

Channels

DC ~ 60MHz ( 3dB)

5.8ns Approx.

DC ~ 100MHz ( 3dB)

3.5ns Approx.

DC ~ 200MHz ( 3dB)

1.75ns Approx.

Bandwidth

Rise Time

Sensitivity

Accuracy

2mV/div ~ 5V/div (1-2-5 increments)

(3% x |Readout|+0.05 div x Volts/div+0.8mV)

AC, DC & Ground

Input Coupling

1M 2%, ~16pF

Input Impedance

Polarity

Normal & Invert

Maximum Input

300V (DC+AC peak), CATII

+ ,

, FFT

Waveform Signal Process

Offset Range

2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V

20MHz ( 3dB)

Bandwidth Limit

CH1 , CH2 , Line , EXT(2CH Only) / (CH3,CH4)

TRIGGER

Sources

Modes

Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay(2CH Only), Event-delay(2CH Only)

AC , DC , LF rej. , HF rej. , Noise rej.

Coupling

Sensitivity

DC ~ 25MHz : Approx. 0.5div or 5mV

25MHz ~ 60/100/200MHz : Approx. 1div or 10mV

EXT TRIGGER

(2CH Only)

Range

15V

Sensitivity

DC ~ 30MHz : ~ 50mV ; 30M ~ 60/100/200MHz : ~100mV

Input Impedance

Maximum Input

2% , ~ 16pF

300V (DC AC peak) , CATII

HORIZONTAL

Range

1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div

Modes

MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y

Accuracy

Pre-Trigger

Post-Trigger

0.01%

20 div maximum

1000 div

X-Axis Input

Y-Axis Input

Phase Shift

X-Y MODE

Channel 1

Channel 2

3 at 100kHz

SIGNAL

1GSa/s maximum

25GSa/s maximum

8 Bits

Real-Time Sample Rate

Equivalent Sample Rate

Vertical Resolution

Record Length

ACQUISITION

25K Dots maximum

Normal, Peak Detect, Average

10ns

Acquisition Mode

Peak Detection

Average

2 , 4 , 8 , 16 , 32 , 64 , 128 , 256

CURSORS AND

, V

amp

, V , V

avg

, V , V , V

, V

, Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot

Voltage Measurement

rms

max

min

MEASUREMENT Time Measurement

Delay Measurement

Freq , Period , Rise Time , Fall Time , Positive Width , NegativeWidth , Duty Cycle

Eight different delay measurement

Cursors Measurement

Auto Counter

Voltage difference between cursors ( V) Time difference between cursors ( T)

Resolution : 6 digits

Accuracy : 2%

Signal Source: All available trigger source except the Video trigger mode

CONTROL PANEL Autoset

Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically

Up to 20 sets of measurement conditions

Save Setup

FUNCTION

Save Waveform

24 sets of waveform

DISPLAY

TFT LCD Type

5.6 inch

Display Resolution

Display Graticule

Display Brightness

234 (Vertically) x 320 (Horizontally) Dots

8 x 10 divisions ; 8 x 12 divisions (menu off)

Adjustable

INTERFACE

Go/NoGo Output

RS-232 Interface

GPIB Interface (Option)

USB

5V Maximum/10mA TTL Open Collector Output

DB 9-pin male DTE RS-232 interface

Fully programmable with IEEE 488.2 compliance

USB Host/Device 2.0 full speed supported

POWER SOURCE

Line Voltage Range

AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection

Battery : 11.1V Li-Ion battery pack

Battery Power(Option)

Charge Time : 8 hours (Power ON)

Operating Time : 3 hours , depending on operating condition

MISCELLANEOUS

Multi-Language Menu

Online Help

Available

Time Clock

Time and Date, Provide the Date/Time for saved data

DIMENSIONS & WEIGHT 254D 142H 310W(mm), Approx. 4.3kg

Specifications subject to change without notice.

DS-2000GD0DH

Option

Standard Accessories

Ordering Information

Opt. 01: GPIB Interface

Opt. 02: Battery power

Probe-GTP-060A:60MHz x10/x1 Switchable Passive Probe for GDS-2062/2064

Probe-GTP-250A:250MHz x10/x1 Switchable Passive Probe for GDS-2202/2204

Probe-GTP-100A:100MHz x10/x1 Switchable Passive Probe for GDS-2102/2104

User Manual

GDS-2062 60MHz, 2-channel, Color LCD Display DSO

GDS-2064 60MHz, 4-channel, Color LCD Display DSO

GDS-2102 100MHz, 2-channel, Color LCD Display DSO

GDS-2104 100MHz, 4-channel, Color LCD Display DSO

GDS-2202 200MHz, 2-channel, Color LCD Display DSO

GDS-2204 200MHz, 4-channel, Color LCD Display DSO

( Factory installed, include additional

DC Power & Battery charger circuits

and Li-lon Battery pack x 2 )

Power cord

Global Headquarters

U.S.A. Subsidiary

GOOD WILL INSTRUMENT CO., LTD.

INSTEK AMERICA CORP., U.S.A.

No. 7-1, Jhongsing Road, Tucheng City, Taipei County 236, Taiwan

T +886-2-2268-0389 F +886-2-2268-0639

3661 Walnut Avenue Chino, CA 91710, U.S.A.

T +1-909-5918358 F +1-909-5912280

E-mail: sales@instek.com

E-mail: marketing@goodwill.com.tw

China Subsidiary

Malaysia Subsidiary

GOOD WILL Instrument (Shanghai) Co., Ltd.

GOOD WILL Southeast Asia Sdn. Bhd., MALAYSIA

8F, of NO.2 Building, No.889 Yishan Road, Shanghai China

T +86-21-6485-3399 F +86-21-5450-0789

E-mail: marketing@instek.com.cn

Plot 522, Lorong Perusahaan Baru 3, Prai Industrial Estate,

13600 Perai, Penang, Malaysia

T +604-3981988 F +604-3981989

E-mail: ettan@goodwill.com.my

相关型号：