PPH-1503D [GWINSTEK]
HIGH PRECISION DUAL CHANNEL OUTPUT DC POWER SUPPLY;型号: | PPH-1503D |
厂家: | GWINSTEK |
描述: | HIGH PRECISION DUAL CHANNEL OUTPUT DC POWER SUPPLY 输出元件 |
文件: | 总2页 (文件大小:632K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HIGH PRECISION DUAL CHANNEL OUTPUT DC POWER SUPPLY
PPH-1503D
FEATURES
Dual Channel DC Power Output
Ch1 : 45W (0~15V/0~3A or 0~9V/0~5A)
Ch2 : 18W (0~12V/0~1.5A)
3.5 inch TFT LCD Display
Built-in DVM Measurement Function
High Measurement Resolution
(1mV/0.1μA for 5mA Range)
Current Sink Function (Maximum : 3.5A)
Pulse Current Measurement(Pulse width min:33ms)
Long Integration Current Measurement
Sequence Function (Sequential power output)
Built-in Battery Simulation Function
Front
Output
Rear
USB
Host
USB
Device
LAN
Output
PPH-1503D is equipped with the excellent
has a voltage range from 0 to +20VDC that saves
users the cost of purchasing an additional voltage
meter.
transient recovery time, which can, in less than
40us, recover the output voltage to within 100mV
of the previous voltage output when the current
level changes from 10% to 100% of the full scale.
Furthermore, conventional power supplies do not
have sufficient response speed to promptly
respond to set voltage value once the set voltage
is changed. PPH-1503D has a rise time of 0.2ms
and a fall time of 0.3ms, which are 100 times
faster than that of conventional power supplies.
Therefore, PPH-1503D can provide DUT with a
OVP, OCP, OTP & Temperature Display
for Heat Sink
PPH-1503D provides OTP function and shows
heat sink temperature on the upper right corner
of the display screen. Other than that, features
such as five sets of system setting values for the
SAVE/RECALL function, 10 sets of Power On
Setup Settings, Key-Lock function to prevent
unauthorized inputs, temperature-controlled fan
to reduce noise, hardcopy to save screen
Support USB (Device& Host)/GPIB/LAN
5 Groups of Save/Recall Setting
External RELAY Control
stable output voltage even when DUT is operating information, and external relay control device
under large transient current output. The internal together augment PPH-1503D's usability. PPH-
high-speed sampling circuit design of PPH-1503D, 1503D supports test requirements of Profile1,
with the sample rate of 64K, can conduct pulse
current measurement without using a current
probe and oscilloscope. The current read back
accuracy is 0.2%+1mA (equals to 11mA) at 5mA
range, and the read back resolution is 0.1uA that
allow DUT to be measured with a high accuracy
level. Unlike battery, general power supplies,
which do not have the characteristics of fast
transient recovery time, can not maintain a stable
power supply for cellular phone, wireless device,
and wearable device which produce large transient
pulse current load for hundreds of ms to dozens
of ms when in use. PPH-1503D, different from
general power supplies, has the characteristics of
fast transient recovery time. While simulating
battery to output pulse current, PPH-1503D can
quickly compensate the voltage drop caused by
pulse current. CH1 has the built-in battery
Profile2 and Profile3 from USB Power Delivery
(PD) constructed by USB-IF association.
Front
Dual Operating Range for PPH-1503D
PPH-1503D
CH1
45W
CH2
18W
POWER
Range 1
0~15V/0~3A
0~9V/0~5A
0~12V/0~1.5A
Range 2
NA
PPH-1503D OPERATING AREA
5.0
Rear Panel
3.0
1.5
0
APPLICATIONS
simulation function, which can define output
impedance settings so as to accurately simulate
battery's impedance characteristics during battery
discharge. Fast transient recovery time and built-in
battery simulation function together facilitate
PPH-1503D to accurately simulate battery's real
behavior pattern so as to conduct product tests.
Pulse current measurement and battery simulation
function are ideal for blue tooth, wearable device
and mobile communications device.
0
6
9
12
15
Voltage(V)
CH1 : 45W
CH2 : 18W
Ideal for high precision low power consumption
component applications such as current measurements
for laser diode, IC with small power consumption.
Power supply and sink current functions are
suitable for charge and discharge applications for
battery, mobile power pack.
The sink current function allows PPH-1503D to
simulate a voltage source with the sink current
capability. The maximum sink current of PPH-
1503D's CH1 is 3.5A and for CH2 is 2A. Long
integration current measurement can be utilized
to conduct average current measurement for
periodical pulse current in a long period of time
that is applied to analyze power consumption for
a period of time. One of the applications is to
measure the average power consumption of a
cellular phone in use so as to conduct the internal
RF module parameter analysis. The maximum
current measurement range of CH1 is 5A and for
CH2 is 1.5A. The built-in sequence function of
CH1 provides users with 1000 steps to edit
sequential outputs, including voltage, current and
execution time. The built-in DVM function of CH2
Sequence function is ideal for simulating a sequential
voltage variation power output to test DUT.
PPH-1503D can simulate a battery or a charger to
conduct charge and discharge tests on DUT.
Voltage/ Current setting and
Temperature Display
Main Screen
Ideal for industries with small current measurements
especially electrochemistry such as electroplating
and electrolyte parameters.
Four Wire Output Open Protection can avoid
product damages caused by automatic production
line's disconnection and probe's bad connection.
Pulse Current Measurement Long Integration Measurement
PPH-1503D
Simply Reliable
OUTPUT RATING
Number of output channel
Voltage
Current
Power
Output Voltage Rising Time
Output Voltage Falling Time
Ch 1
0 ~ 15V
Ch 2
0 ~ 12V
0 ~ 1.5A
18W
0.20ms (10% ~ 90%)
0.30ms (90% ~ 10%)
0 ~ 5A (9V); 0 ~ 3A (15V)
45W
0.20ms (10% ~ 90%)
0.30ms (90% ~ 10%)
STABILITY
Voltage
Current
0.01%+3.0mV
NA
0.01%+3.0mV
NA
0.01%+2mV
0.5mV
0.01%+2mV
0.5mV
Load
Line
REGULATION (CV)
REGULATION (CC)
RIPPLE & NOISE
Load
Line
0.01%+1mA
0.5mA
0.01%+1mA
0.5mA
CV p-p (20Hz~20MHz)
CV rms (0~1MHz)
CC rms
8mV
3mV
NA
8mV
3mV
NA
(0.05%+10mV)
(0.16%+5mA)
(0.16%+0.5mA)
(0.16%+5μA)
(0.05%+10mV)
(0.16%+5mA)
NA
NA
PROGRAMMING ACCURACY
READBACK ACCURACY
Voltage
Current (1.5A or 5A)
Current (500mA)
Current (5mA )
Voltage
(0.05%+3mV)
(0.05%+3mV)
Current (1.5A or 5A)
Current (500mA)
Current (5mA )
(0.2%+400μA)
(0.2%+100μA)
(0.2%+1μA)
(0.2%+400μA)
NA
(0.2%+1μA)
RESPONSE TIME
(Response to 1000% Load Change)
Transient Recovery Time
1000% Load Change;<40μS(<100mV, Rear)
<50μS(<100mV Front);<80μS(<20mV)
1000% Load Change;<40μS(<100mV Rear)
<80μS(<20mV)
2.5mV
2.5mV
1.25mA(range: 1.5A)
NA
NA
Voltage
Current
Current
Current
PROGRAMMING
RESOLUTION
1.25mA(range: 5A)
0.125mA(range: 500mA)
1.25μA(range: 5mA)
1mV
1mV
Voltage
Current
Current
Current
READBACK RESOLUTION
0.1mA(range: 5A)
0.01mA(range: 500mA)
0.1μA(range: 5mA)
0.1mA(range: 1.5A)
NA
0.1μA(range: 5mA )
50V
50mV
OVP Accuracy
PROTECTION FUNCTION
DVM
DC Readback Accuracy(23℃ 5℃)
Readbck Resolution
Input Voltage Range
Maximum Input Voltage
Input Resistance and Capacitance
Range
0.05%+3mV
1mV
0 ~ 20VDC
-3V, +22V
20MΩ
1 mΩ ~ +1 Ω
0.5% + 10 mΩ
1mΩ
PROGRAMMABLE OUTPUT
RESISTANCE
Programming Accuracy
Resolution
5mA ~ 5A, 5mA/Step
33.3μs ~ 833ms, 33.3μs/Step
5mA ~ 1.5A, 5mA/Step
33.3μs ~ 833ms, 33.3μs/Step
Trigger Level
PULSE CURRENT
MEASUREMENT
High Time/low Time/Average Time
Trigger Delay
Average Readings
Long Integration Pulse Timeout
Long Integration
0 ~ 100ms,10μs/Steps
1 ~ 100
1S ~ 63S
850ms(60Hz)/840ms(50Hz)~60s, or Auto time
16.7ms/Steps(60Hz), 20ms/Steps(50Hz)
Rising, Falling, Neither
0 ~ 100ms,10μs/Steps
1 ~ 100
1S ~ 63S
850ms(60Hz)/840ms(50Hz)~60s, or Auto time
16.7ms/Steps(60Hz), 20ms/Steps(50Hz)
Rising, Falling, Neither
Measurement Time
Long Integration Trigger Mode
CURRENT SINK CAPACITY
OTHERS
3.5A(Vout≦4V); 3.5A-0.25x(Vout-4)(Vout>4V) 2A(Vout≦5V); 2A-0.1x(Vout-5)(Vout>5V)
Sink Current Rating
Output Terminal
DVM Input
Front/Rear Panel
NA
Rear Panel
Front Panel
Relay Control Connector
Operation Temperature
Operation Humidity
Storage Temperature
Storage Humidity
Standard
150mA/15V , 100mA/5V output
0 ~ 40°C
ꢀ 80%
-20˚C ~ 70˚C
< 80%
GPIB/USB/LAN
PC REMOTE INTERFACES
PC SOFTWARE & LABVIEW DRIVER
MEMORY
Free
PC Software/Labview Driver
Save/Recall
Input Power
Power Consumption
5 ꢀ
90 ~ 264VAC ; 50/60Hz
160W
POWER
DIMENSIONS & WEIGHT
222(W) x 86(H) x 363(D) mm; Approx 4.5kg
Specifications subject to change without notice.
PH-1503DGD1DH
PPH-1503D High Precision Dual Channel Output DC Power Supply
GTL-246
USB Cable (USB 2.0, A-B Type)
CD (User manual x1), Quick Start manual x1, Power cord (Region dependent), Test lead GTL-117 x1(10A Maximum),
GTL-203A x1(3A Maximum), GTL-204A x1(10A Maximum)
Global Headquarters
U.S.A. Subsidiary
GOOD WILL INSTRUMENT CO., LTD.
T +886-2-2268-0389 F +886-2-2268-0639
INSTEK AMERICA CORP.
T +1-909-399-3535 F +1-909-399-0819
China Subsidiary
Simply Reliable
Japan Subsidiary
GOOD WILL INSTRUMENT (SUZHOU) CO., LTD.
T +86-512-6661-7177 F +86-512-6661-7277
TEXIO TECHNOLOGY CORPORATION.
T +81-45-620-2305 F +81-45-534-7181
Malaysia Subsidiary
GOOD WILL INSTRUMENT (M) SDN. BHD.
T +604-6111122 F +604-6115225
Korea Subsidiary
GOOD WILL INSTRUMENT KOREA CO., LTD.
T +82-2-3439-2205 F +82-2-3439-2207
Europe Subsidiary
www.gwinstek.com
www.facebook.com/GWInstek
GOOD WILL INSTRUMENT EURO B.V.
T +31(0)40-2557790 F +31(0)40-2541194
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明