L12536_15 [HAMAMATSU]
ELECTROSTATIC CHARGE REMOVER USING PHOTOIONIZATION;
| 型号： | L12536_15 |
| 厂家： | 
HAMAMATSU CORPORATION |
| 描述： | ELECTROSTATIC CHARGE REMOVER USING PHOTOIONIZATION |
| 文件： | 总4页 (文件大小：202K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ELECTROSTATIC
REMOVER
L12536
ELECTROSTATIC CHARGE REMOVER USING PHOTOIONIZATION
" "neutralization achieved by light
0V
OVERVIEW
The PhotoIonBar is an electrostatic charge remover using photoioni-
zation that neutralizes static electricity by irradiating the charged ob-
ject with weak soft X-rays.To neutralize static charges, ordinary ioniz-
ers generate ions by corona discharge and send them toward the charg-
ed object by air flow. Unlike these old methods, the PhotoIonBar emits
weak soft X-rays that directly ionize the air around the charged object to
neutralize static charges. The PhotoIonBar needs "NO AIR FLOW" and
generates "NO DUST" and "NO ELECTROMAGNETIC NOISE".
* Controller and cable are sold separatelly.
Here's why photoionization works so well!
G0V neutralization
GNeeds no air flow
Fine ion balance makes no opposite charging
GGenerates no dust and no electro-
magnetic noise
"Soft X-ray irradiation area" = "Static charge
neutralization area"
G
Maintenance free (needs no electrode cleaning)
ICorona discharge
ionization
IPhotoionization
Still
Soft X-rays
Air flow
charged
O
V
Positive ions
Positive ions
Negative ions
Charges
Negative ions
Charges
TAPPC0170EA
PhotoIonBar OFFERS MORE FEATURES
GCompact size for flexible installation layout
GLow cost
GLow power consumption
GLong service life
Comes with DIN rail attachment for easy installation and removal
GStatic charge neutralization area can be changed
to match production line layout
Maximum of 10 units can be daisy-chained to cover areas up
to 2 m wide (recommended).
GEasy to shield
Soft X-rays can be completely
shielded with acrylic plate only
3.3 mm thick
GEco-friendly (contains no hazardous beryllium)
"PHOTOIONIZATION" MECHANISM
When X-rays hits a stable atom or molecule, an electron is ejected out of the atom or molecule leaving a positive ion
(atom or molecule of positive polarity). The ejected electron then combines with another stable atom or molecule to
form a negative ion (atom or molecule of negative polarity). As a result, the same amount of positive ions and negative
ions are generated.
These ions are also generated in the vicinity of a charged object, and they are attracted to the charged object to neu-
tralize the static charges.
Ejected
Both positive
and negative ions are
generated
electron e–
Stable atom
or molecule
Soft X-ray
Stable atom or molecule
e–
Ion
Ion
Atom or molecule of
positive polarity as
one electron is ejected.
Ion
Ion
EXAMPLE OF INSTALLING THE PhotonIonBar
PhotoIonBar emits cone-shaped soft X-ray, and it works effectively within 300 mm of work distance.
Recommended installation A
CONTROL CABLE A12538-001 (OPTION)
PhotoIonBar L12536
100 mm
GDistance to charged object
: 100 mm
DIN RAIL
GDistance between each
PhotoIonBar
SOFT X-RAYS
100 mm
: 100 mm
*
CHARGED OBJECT
4-PIN I/O CABLE
A12538-050N/-100N
(OPTION)
Neutralization area: 760 mm × 350 mm
PLC *
* Programmable Logic Controller
Recommended installation B
CONTROL CABLE A12538-001 (OPTION)
DIN RAIL
PhotoIonBar L12536
100 mm
GDistance to charged object
: 200 mm
GDistance between each
PhotoIonBar
: 100 mm
SOFT X-RAYS
200 mm
CHARGED OBJECT
*
CONTROL CABLE
A12538-050/-100
(OPTION)
Neutralization area: 1110 mm × 690 mm
PhotoIonBar
POWER
ALERT
PRO
ON
ION
OFF
I
-
POWER (AC)
CONTROLLER
C12537
(OPTION)
* Please prepare PLC or purchase controller depending on operation method.
CHARGE NEUTRALIZATION EFFECT
In photoionization, ions are generated over the entire area irradiated with soft X-rays. This improves the charge neutrali-
zation efficiency and also shortens the charge neutralization time.
ICHARGE NEUTRALIZATION EFFECT
GWhen 1 PhotoIonBar is used
GWhen 3 PhotoIonBars are connected
400
mm
300
mm
200
mm
100
mm
100
mm
200
mm
300
mm
400
mm
500
mm
400
mm
300
mm
200
mm
100
mm
100
mm
200
mm
300
mm
400
mm
500
mm
1 s
Measurement conditions
2 s
3 s
4 s
Charged plate: 150 mm, 20 pF
Charged voltage: 1 kV / 100 V
Distance between each PhotoIonBar: 100 mm
Temperature: 25 °C
4 s or more
Humidity: 50 %
TAPPC0172EB
SOFT X-RAY SHIELDING
Using the PhotoIonBar requires "soft X-ray shielding"
during operation. However, the soft X-rays emitted from the
PhotoIonBar are only at a strength of about 3 to 4.9 keV
and so only need the following materials for 100 %
shielding.
SOFT X-RAY SHIELDING EFFECTS
SUS304
PVC
Aluminum plate
Acrylic plate
TAPPB098EA
100
80
Thickness (mm)
Shielding
material
60
Our other PhotoIonizers PhotoIonBar
SUS304 (stainless steel)
Aluminum plate
Acrylic plate
PVC
0.22
1.3
0.11
0.23
3.3
40
21.7
2.2
20
0
0.65
* A survey meter can be used to check soft X-ray leakage.
Please consult us for details.
0.00001
0.0001
0.001
0.01
0.1
1
10
THICKNESS (mm)
Note 1: Shielding effect is measured when distance between PhotoIonBar and
survey meter is 100 mm and shielding material is placed between them
(survey meter side).
Note 2: The surface of PVC (polyvinyl chloride) plates may blacken when directly
irradiated by soft X-rays from a very short distance (within 100 mm) for a
continuous period over several months, but this is not a problem. Such
type of changes will not occur in iron and aluminum material plates.
SPECIFICATIONS
Parameter
Description / Value
4.9 kV
Tube voltage (DC)
Soft X-ray tube
Beam angle
120 °
Recommended distance to charged object
Recommended distance between each PhotoIonBar
Installation method
Connection to head unit
Maximum connectable head units
Input voltage
100 mm to 300 mm
100 mm
DIN rail mount
Control cable
10 units
DC 24 V 1
Power consumption
4 W Max.
Guaranteed life
1 year
Life expectancy
15000 hours
Operating / storage temperature range
Operating / storage humidity range
0 °C to +40 °C / -10 °C to 60 °C
Below 60 % / below 85 %
NOTE: 1Power supply voltage is AC 100 V to AC 240 V (50 Hz / 60 Hz) when controller is used.
DIMENSIONAL OUTLINES (Unit: mm)
OUTPUT WINDOW
30
92
ALERT LED
CONNCT
ALERT
CONNCT
Weight: Approx. 0.22 kg
16
60
16
DIN RAIL (Rail width 27 mm)
DIN RAIL (Rail width 27 mm)
TAPPA0103EC
OPTIONS (Unit: mm)
CONTROLLER C12537
PhotoIonBar
AC IN
ACCESSORY
HEAD
POWER
ALERT
PRO
ON
ION
OFF
I
-
90
132
155
197
ACCESSORY TERMINAL
D-SUB 15-PIN
Weight: Approx. 1.1 kg
TAPPA0104EC
CONTROL CABLE A12538-001/-005/-050/-100
A
Type No.
A12538-001
A12538-005
A12538-050
A12538-100
A12538-050N
A12538-100N
Connection between
A
100 mm
500 mm
5000 mm
10000 mm
5000 mm
10000 mm
PhotoIonBar and PhotoIonBar
PhotoIonBar and controller
PhotoIonBar and PLC*
4 PIN I/O CABLE A12538-050N/-100N
A
*Programmable logic controller
POWER (+24 V, 0.15 A)
ON SIGNAL (+5 V to +24 V)
ALERT SIGNAL
GND
TAPPA0105EC
SAFETY PRECAUTIONS
· Soft X-rays emitted from this product are harmful to human health. Handle carefully to avoid X-ray exposure.
·
When using this product, always install the product inside an X-ray shielded cabinet or other shielded location with utilizing safety interlock mechanism.
PRECAUTIONS DURING USE
· This product is a high precision device. Handle it carefully to avoid applying shock and vibration.
· The internal ion generator (soft X-ray tube) is a vacuum tube using glass material that might crack or rupture if subjected to mechanical shock.
Do not apply strong shock or vibration to this product.
·
This product was designed for natural air cooling. Do not install it inside a small, air-tight container or locations where the generated heat cannot dissipate.
· Do not use this product in locations where organic solvents or flammable gases are present.
· If this product does not operate correctly, turn the power off and check the cable connections. Then turn the power on again and recheck
operation. If still inoperative then this product might be defective so contact us for advice.
LEGAL REGULATIONS INVOLVING THIS PRODUCT
This product must be used in compliance with health and safety regulations enforced to prevent bodily harm caused by the ionizing radiation.
Users of this product must be familiar with the applicable laws that regulate use of X-ray emission devices. To obtain more information, refer to
international or domestic laws and regulations on ionizing radiation and comply with the required procedures listed there.
WARRANTY PERIOD
This product is guaranteed for one year from the date of delivery. The warranty is limited to replacement of the product. The warranty does not
cover damage caused by misuse or accidents such as natural disasters.
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K.
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: info@hamamatsu.co.uk
North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se
TAPP1077E03
JUL. 2015 IP
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: info@hamamatsu.it
China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: hpc@hamamatsu.com.cn
相关型号：
©2020 ICPDF网 联系我们和版权申明