02050002512 [HARTING]

DIN-Signal harbus64,C,F,PL2-500 reel;


型号：	02050002512
厂家：	HARTING Technology Group
描述：	DIN-Signal harbus64,C,F,PL2-500 reel 连接器连接器支架
文件：	总3页 (文件大小：881K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Product data sheet

02 05 000 1511

DIN-Signal harbus64,C,F,PL1-5000 reel

Part number

02 05 000 1511

Specification

DIN-Signal harbus64,C,F,PL1-5000 reel

HARTING eCatalogue https://b2b.harting.com/02050001511

Image is for illustration purposes only. Please refer to product description.

Identification

Category

Series

Contacts

har-bus 64

Type of contact

Features

Crimp contact

lead-free

Version

Gender

Female contact

Manufacturing process

Pack contents

Stamped contacts

5000 bandoliered contacts

Technical characteristics

Conductor cross-section

Wire outer diameter

Operating current

0.09 ... 0.5 mm²

AWG 28 ... AWG 20

0.7 ... 1.5 mm

≤1.5 A

Contact resistance

Stripping length

≤20 mΩ

3.5 ... 4 mm

Performance level

Mating cycles

≥500

Material properties

Material (contacts)

Copper alloy

Page 1 / 3 | Creation date 2021-07-20 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to

the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,

conformity with applicable laws and directives, as well as for the electrical safety in the particular application.

HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany

Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com

Product data sheet

02 05 000 1511

DIN-Signal harbus64,C,F,PL1-5000 reel

Material properties

Noble metal over Ni Mating side

Ni Termination side

Surface (contacts)

RoHS

compliant

ELV status

compliant

China RoHS

REACH Annex XVII substances

REACH ANNEX XIV substances

REACH SVHC substances

Specifications and approvals

Specifications

IEC 61076-4-113 (complementary)

Commercial data

Packaging size

Net weight

1,200 g

Country of origin

European customs tariff number

eCl@ss

Germany

85366990

27440204 Contact for industrial connectors

Current carrying capacity

The current carrying capacity of the connectors is

limited by the thermal load capability of the contact

element material including the connections and the

insulating parts. The derating curve is therefore

valid for currents which flow constantly (non-

intermittent) through each contact element of the

connector evenly, without exceeding the allowed

maximum temperature.

Measuring and testing techniques acc. to IEC

60512-5-2

Ambient temperature (°C)

Page 2 / 3 | Creation date 2021-07-20 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to

the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,

conformity with applicable laws and directives, as well as for the electrical safety in the particular application.

HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany

Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com

Product data sheet

02 05 000 1511

DIN-Signal harbus64,C,F,PL1-5000 reel

Installation of crimp contacts

Fitting the crimp contacts:

After crimping the wires onto the contacts with the help of a crimping tool or an automatic crimping machine the

contacts should be correctly oriented and inserted into the cavities of the connector moulding in the required

configuration. They snap into position and are firmly held in place. A light pull on the wire assures the correct

tensile strength of the contact. When using stranded wires with a gauge below 0.37 mm²an insertion tool is

necessary.Insertion tool part number: 09 99 000 0100

Insertion tool part number: 09 99 000 0100

Removing the crimp contacts:

The removal tool is inserted into a slot on the side of the respective crimp cavity. This action compresses the contact

retaining spring therefore the contact can then be easily withdrawn using a light pull on the wire. This action will cause

no damange to the contact / wire which can be repositioned / refitted as necessary. The drawing demonstrates the

crimp removal procedure (max. 5x).

Removal tool part number: 09 99 000 0101

Page 3 / 3 | Creation date 2021-07-20 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the

user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,

conformity with applicable laws and directives, as well as for the electrical safety in the particular application.

HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany

Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com

相关型号：