09062326835 [HARTING]

DIN-Power F032FS-4,5C1-2;


型号：	09062326835
厂家：	HARTING Technology Group
描述：	DIN-Power F032FS-4,5C1-2 PC 连接器
文件：	总4页 (文件大小：668K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Product data sheet

09 06 248 2835

DIN-Power F048FS-4,5C1-1

Part number

Specification

09 06 248 2835

DIN-Power F048FS-4,5C1-1

HARTING eCatalogue https://b2b.harting.com/09062482835

Image is for illustration purposes only. Please refer to product description.

Identification

Category

Connectors

Series

DIN 41612

Type F

Identification

Element

Female connector

Straight

Description of the contact

Features

lead-free

Version

Termination method

Wave soldering termination

Motherboard to daughtercard

Mezzanine

Connection type

PCB to cable

Number of contacts

Contact configuration

Termination length

Rows z, d and b, positions 2, 4, ... , 30, 32

4.5 mm

Hole coding

Coding

Coding with loss of contacts

Shroud coding

PCB fixing

With fixing flange

Technical characteristics

Contact rows

5.08 mm

Contact spacing (termination side)

Page 1 / 4 | Creation date 2021-08-27 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to

the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,

conformity with applicable laws and directives, as well as for the electrical safety in the particular application.

HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany

Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com

Product data sheet

09 06 248 2835

DIN-Power F048FS-4,5C1-1

Technical characteristics

3.81 mm

5.08 mm

Contact spacing (mating side)

Rated current

6 A

Rated current

Rated current measured at 20 °C, see derating curve for details

Clearance distance

Creepage distance

≥1.6 mm

≥3 mm

Insulation resistance

>10

Contact resistance

≤15 mΩ

Limiting temperature

-55 ... +125 °C

≤75 N

Insertion and withdrawal force

Performance level

Mating cycles

acc. to IEC 60603-2

≥500

1.55 kV (contact-contact)

2.5 kV (contact-ground)

Test voltage U

r.m.s.

Isolation group

Hot plugging

IIIa (175 ≤ CTI < 400)

Material properties

Material (insert)

Thermoplastic resin, glass-fibre filled

RAL 7032 (pebble grey)

Copper alloy

Colour (insert)

Material (contacts)

Noble metal over Ni Mating side

Sn over Ni Termination side

Surface (contacts)

Material flammability class acc. to UL 94

RoHS

V-0

compliant

ELV status

compliant

China RoHS

REACH Annex XVII substances

REACH ANNEX XIV substances

REACH SVHC substances

California proposition 65

Yes

Nickel

Antimony trioxide

California proposition 65 substances

Page 2 / 4 | Creation date 2021-08-27 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to

the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,

conformity with applicable laws and directives, as well as for the electrical safety in the particular application.

HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany

Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com

Product data sheet

09 06 248 2835

DIN-Power F048FS-4,5C1-1

Specifications and approvals

Specifications

IEC 60603-2

UL 1977 ECBT2.E102079

CSA-C22.2 No. 182.3 ECBT8.E102079

UL / CSA

Railway classification

F4/I3 acc. to NFF 16-101/102

Commercial data

Packaging size

Net weight

29.42 g

Country of origin

European customs tariff number

eCl@ss

Romania

85366990

27460201 PCB connector (board connector)

Current carrying capacity

The current carrying capacity of the connectors is

limited by the thermal load capability of the contact

element material including the connections and the

insulating parts. The derating curve is therefore

valid for currents which flow constantly (non-

intermittent) through each contact element of the

connector evenly, without exceeding the allowed

maximum temperature.

Measuring and testing techniques acc. to IEC

60512-5-2

Ambient temperature (°C)

Soldering instructions

The connectors should be protected when being soldered. Otherwise, they might become contaminated as a result of

soldering operations or deformed as a result of overheating.

1) For prototypes and short runs protect the connectors with an industrial adhesive tape, e.g. Tesaband 4331

(www.tesa.de). Cover the underside of the connector moulding and the adjacent parts of the pcb as well as the open

sides of the connector. This will prevent heat and gases of the soldering apparatus from damaging the connector.

About 140 + 5 mm of the tape should suffice.

2) For large series a jig is recommended. Its protective cover with a fast action mechanical locking devie shields the

connectors from gas and heat generated by the soldering apparatus. As an additional protection a foil can be used for

covering the parts that should not be soldered.

Page 3 / 4 | Creation date 2021-08-27 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to

the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,

conformity with applicable laws and directives, as well as for the electrical safety in the particular application.

HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany

Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com

Product data sheet

09 06 248 2835

DIN-Power F048FS-4,5C1-1

Mating conditions

To ensure reliable connections and prevent unnecessary damage, please refer to the application data diagrams.

These recommendations are set out in IEC 60603-2.

The connectors should not be coupled and decoupled under electrical load.

Page 4 / 4 | Creation date 2021-08-27 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the

user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,

conformity with applicable laws and directives, as well as for the electrical safety in the particular application.

HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany

Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com

相关型号：