RP13A-SC-TP [HRS]
Plastic Push-Pull Lock Connectors;
| 型号： | RP13A-SC-TP |
| 厂家： | 
HRS |
| 描述： | Plastic Push-Pull Lock Connectors |
| 文件： | 总12页 (文件大小：855K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Plastic Push-Pull Lock Connectors
RP13 Series
Features
1. Superior mating operability
•
A secure mating condition is achieved by simply pushing the plug on to the
receptacle; Pull back on the locking sleeve to easily un-mate the connector.
•Index marks are provided on the plug for easy mating alignment.
•Our proprietary guide keys aid with making a correct mating
orientation in blind or low light conditions.
2. Light weight and robust design
The strong outer shell is made of glass-reinforced polycarbonate
resin, producing light but durable connectors.
3. Available in an anti-static version
The anti-static version connects the plug and receptacle housing
together in such a way that the surrounding shield guards against
the effects of static electricity.
4. Variation
Items
Number of contacts
13, 15, 20
Connector type
Plug and jack: Straight, Receptacle: Straight, right angle
Plug termination type
Receptacle termination type
Receptacle mounting style
Crimp
Crimp, PCB dip
Flange, jam nut
Product Specifications
Rated Standard type : 2A (when using a wire of at least 24 AWG)
current Anti-static type : 2A (when using a wire of at least 22 AWG)
Operating
temperature range
−10 to +60ç
−10 to +60ç
Ratings
Rated For 13 and 15 contact positions : AC 30V, DC 42V
voltage 20 contacts : AC 100V, DC 140V
Storage
temperature range
Items
Specifications
Conditions
1. Contact
resistance
For 13 and 15 contact positions : 15mø max.
20 contacts : 30mø max.
Measured at DC 1A
Measured at DC 250V
AC 300V for 1 minute
2. Insulation
resistance
1,000Mø min.
3. Withstanding
voltage
No flashover or dielectric breakdown.
4. Vibration
resistance
10 to 55Hz/cycle, amplitude : 0.75mm, 3 axis
directions, 2 hours each
Acceleration : 490m/s2, duration : 11ms,
3 axis directions, 3 cycles each
No electrical discontinuity for 10µs or greater.
5. Shock
resistance
No electrical discontinuity for 10µs or greater.
Contact resistance :
6. Mating cycles For 13 and 15 contact positions : 20mø max.
For 20 contact positions : 45mø max.
1,000 times
-55ç : 30 minutes Normal temperature : 10 to
15 minutes 85ç : 30 minutes Normal
➝ ➝
temperature : 10 to 15 minutes, leave total 5 cycles
➝
7. Temperature
Insulation resistance : 100Mø min.
cycle
8. Moisture
resistance
Insulation resistance : 10Mø min. (at high humidity)
100Mø min. (when dry)
Temperature : 40ç, relative humidity : 90 to 95%,
leave 96 hours
Materials / Finish
Items
Material
Polycarbonate resin
Brass
Vinyl chloride resin
Polycarbonate resin
Steel
Finish
--------------
--------------
--------------
--------------
Nickel plating
Remarks
UL94V-0
--------------
--------------
UL94V-0
Exterior, insulator
Clamp
Plug
Bushing
Exterior, insulator
Receptacle
Female contact
Male contact
Phosphor bronze
Brass
--------------
Silver plating
Crimp contact
Crimp contact
Female contact
Male contact
--------------
--------------
Phosphor bronze
Silver plating, gold plating
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
2018.7w
RP13 Series●Plastic Push-Pull Lock Connectors
Product Number Structure
■
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Plug
RP13A - 12 P A - 13 S C (01)
Model name : RP13A Series
q
w
Contact form
S : Female contact
P : Male contact
y
Shell size : The shell size is the outer diameter of the mating
end of the plug.
Shell type
Contact termination type:
A : Straight, PCB dip
B : Right-angle, PCB dip
C : Contact termination by crimping
e
u
P : Straight plug
R : Receptacle
J : Jack
Shell variation : Connectors are distinguished by A, B, or C
if a variation is made within the series.
r
t
Other specifications : A two-digit character is added to
indicate other specifications as needed.
i
Number of contacts
Crimp contact
RP13A - SC - 2 1 1
Barrel form :
RP13, RP13A 1 : For 18 to 22 AWG
2 : For 24 to 28 AWG
RP19 1 : For 18 to 22 AWG
2 : For 24 to 30 AWG
!
!
Model name : Indicates the series name.
RP13, RP13A, RP19
q
o
Contact type :
SC : Socket type crimp contact (female)
PC : Pin type crimp contact (male)
Identification of plating :
1 : Gold plating
2 : Silver plating
Contact form :
1 : Loose piece contacts
2 : Reel contacts
!
2
RP13 Series●Plastic Push-Pull Lock Connectors
Standard type
Standard plug
Ａ
Ｂ
(Representative example.)
RP13A-12PA-13SC(71)
Part No.
HRS No.
No. of contacts
A
B ØC Weight
6.1
Part No.
HRS No.
No. of contacts
A
B ØC Weight
6.1
RP13A-12PA-13SC(71) 113-0182-4 71
RP13A-12PB-13SC(31) 113-0184-0 31
RP13A-12PD-13SC(71) 113-0186-5 71
RP13A-12PE-13SC(71) 113-0201-7 71
RP13A-12PK-13SC(71) 113-1006-7 71
RP13A-12PS-13SC(71) 113-1026-4 71
RP13A-12PD-15SC(71) 113-0206-0 71
RP13A-12PK-15SC(71) 113-0219-2 71
RP13A-12PP-15SC(71) 113-1010-4 71
RP13A-12PD-20SC(71) 113-0214-9 71
RP13A-12PG-20SC(71) 113-0210-8 71
RP13A-12PH-20SC(71) 113-0217-7 71
RP13A-12PK-20SC(71) 113-1012-0 71
47.2 32
52.2 37
5.7
7.5
52.2 37 6.1
47.2 32 6.4
20
47.2 32 6.4 6.0g
7.1
52.2 37
8.1
13
7.1 6.0g RP13A-12PS-20SC(71) 113-1022-3 71
8.1
52.2 37 6.1
7.1
(Note) Cable clamping, cable rotation, and other forces may vary
with the cable construction. Please make sure that your cable
is suitable for use with these connectors before usage and
production.
15
7.5
Receptacle (Flange type)
(Crimp type)
Ａ
3.2 10
2-Ｂ
Press-fitted
metal flange
(Hole is threaded on metal
flange portion)
(Representative example.)
RP13A-12RA-13PC(71)
Part No.
HRS No.
No. of contacts
A
B
Weight
4.0g
RP13A-12RA-13PC(71)
RP13A-12RA-15PC(71)
RP13A-12RA-20PC(71)
113-0183-7 71
113-0207-3 71
113-0215-1 71
13
15
20
18.1
16
M2.6×0.45
(Remarks) See page 5 for details on mounting hole dimensions.
(Dip type )
Ａ
18.1
3.2
10
Ｂ
2-M2.6×0.45
(Hole is threaded on
metal flange portion)
0.5×0.3
(Dip post diameter)
Press-fitted metal flange
(Representative example.)
RP13A-12RA-13PA(71)
Part No.
HRS No.
No. of contacts
A
B
3
Weight
5.0g
RP13A-12RA-13PA(71)
RP13A-12RA-15PA(71)
113-0202-0 71
113-1002-6 71
13
15
21.5
(Remarks) See page 5 for details on mounting dimensions and page 7 for details on dip post arrangement sizes.
3
RP13 Series●Plastic Push-Pull Lock Connectors
Receptacle (Jam nut to be fastened)
(Dip type)
Ａ
18.1
1
9
Ｂ
0.5×0.3
(Dip post diameter)
M12×1
RP13A-12RB-13PA(71)
No. of
contacts
Part No.
HRS No.
A
B
3
Weight
3.5g
RP13A-12RB-13PA(71)
113-0203-2 71
21.5
13
(Remarks) See page 5 for details on mounting hole dimensions and page 7 for details on dip post arrangement sizes.
Right-angle, dip type
Ｅ
1
(Note) Panel thickness:
1.5mm max.
18
４
１
２０
１７
3.5
(Center of the screw hole
for mounting the connector)
Dip post diameter
RP13A-12RC-20PB
(Note) The mounting panel thickness should be 1.5mm or less. Mounting
hole should be Ø15 mm or more.
No. of
contacts
Part No.
HRS No.
A
B
C
ØD
E
F
Weight
RP13A-12RC-13PB
RP13A-12RC-20PB
113-1020-8
113-0211-0
13
20
17.5
19.5
8.5
3.5
3
0.64
0.6
23.5
31.5
13
15
4.0g
5.0g
10.5
(Remarks) See page 7 for details on dip post arrangement sizes.
Jack
Ａ
Ｂ
(Representative example.)
RP13A-12J-13PC(71)
No. of
contacts
Part No.
HRS No.
A
B
ØC
6.1
Weight
4.5g
RP13A-12J-13PC(71)
RP13A-12JD-15PC(71)
RP13A-12JK-15PC(71)
RP13A-12JG-20PC(71)
113-0166-8 71
113-1005-4 71
113-0218-0 71
113-1004-1 71
13
15
20
49.1
54.1
52.6
34.6
39.6
37.4
7.1
7.4
(Note) Cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable
is suitable for use with these connectors before usage and production.
4
RP13 Series●Plastic Push-Pull Lock Connectors
Contact
(Male contact)
Panel mounting hole
dimensions
Ａ-Ａ
Ａ
Ａ
＋0.05
3.1
ꢀ0
Ｄ
Ｃ
(Representative example.)
For 13 and 15 contact positions
Applicable
wire size
Type
Part No.
HRS No. Plating
B
C
D
E
Loose piece
contacts
RP13-PC-122 113-0179-0 Silver plating
Partial gold
RP13-PC-221 113-0360-0
plating
1.2 1.35 13.9 1.4 24 to 28 AWG
Reel contacts
(Flange type)
RP13-PC-222 113-0141-7 Silver plating
13 contact position for super-thick wires (available for contact position numbers 12 and 13 only)
Applicable connector
Part No.
HRS No.
Applicable
wire size
Type
Part No.
HRS No. Plating
B C D E
RP13A-12RA-13PC(71)
RP13A-12RA-13PA(71)
RP13A-12RA-15PC(71)
RP13A-12RA-15PA(71)
RP13A-12RA-20PC(71)
113-0183-7 71
113-0202-0 71
113-0207-3 71
113-1002-6 71
113-0215-1 71
Loose piece
contacts
RP13-PC-112 113-0178-7
Silver plating 1.6 2.1 13.9 1.4 18 to 22 AWG
Reel contacts RP13-PC-212 113-0140-4
For 20 contact positions
Applicable
wire size
Type
Part No.
HRS No. Plating
B C D E
Loose piece
contacts
RP19-PC-122 113-0268-8
Silver plating 1.2 1.35 12 1.18 24 to 30 AWG
Reel contacts RP19-PC-222 113-0264-7
(Female contact)
Ａ-Ａ
Ａ
Ａ
Ｄ
Ｃ
(The form shown above represents an example.)
For 13 and 15 contact positions
(Jam nut to be tightened)
Applicable connector
Applicable
wire size
Type
Part No.
HRS No. Plating
B C D E
Part No.
HRS No.
RP13A-SC-121 113-0363-9 Partial gold plating
RP13A-SC-122 113-0181-1 Silver plating
RP13A-SC-221 113-0362-6 Partial gold plating
RP13A-SC-222 113-0151-0 Silver plating
Loose piece
contacts
RP13A-12RB-13PA(71)
113-0203-2 71
1.2 1.35 13.9 1.4 24 to 28 AWG
(Note 1) Above figures show the arrangement
viewed from the panel surface. The
mating guide of flange type is located
on the top position.
Reel contacts
13 contact position for super-thick wires (available for contact position numbers 12 and 13 only)
Applicable
(Note 2) The applicable panel thickness for the
flange type receptacle is 2.7mm max.,
since this type is mounted from the back
surface of the panel.
(Note 3) The applicable panel thickness for a hex
nut fastening type is 5mm max. and
1mm min.
Type
Part No.
HRS No. Plating
B C D E
wire size
Loose piece
contacts
RP13A-SC-112 113-0180-9
Silver plating 1.6 2.1 13.9 1.4 18 to 22 AWG
Reel contacts RP13A-SC-212 113-0150-8
For 20 contact positions
Applicable
wire size
Type
Part No.
HRS No. Plating
B C D E
Loose piece
contacts
RP19-SC-122 113-0270-0
Silver plating 1.2 1.35 11 1.18 24 to 30 AWG
Reel contacts RP19-SC-222 113-0266-2
(Note 1) Use connectors with gold-plated contacts if the connectors will be
subjected to constant vibration.
(Note 2) Loose piece contacts are available in 100 piece packs. Reel
contacts are available as 10,000 piece reels.
5
RP13 Series●Plastic Push-Pull Lock Connectors
RP13A anti-static type
Plug
47.2
32
(Representative example.)
RP13A-12PA-13PC(71)
Part No.
HRS No.
113-4003-5 71
No. of contacts
13
Weight
6.0g
RP13A-12PA-13PC(71)
(Note) Cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable
is suitable for use with these connectors before usage and production.
Receptacle (flange type)
(Crimp type)
15
12
2×Ø2.8 (hole)
(metal flange)
Press-fitted
metal flange
(Representative example.)
RP13A-12R-13SC(71)
Part No.
RP13A-12R-13SC(71)
HRS No.
No. of contacts
13
Weight
4.0g
113-4002-2 71
(Remarks) See page 7 for details on mounting hole dimensions.
Contact
(Male contact)
(Female contact)
Ａ-Ａ
Ａ-Ａ
Ａ
Ａ
Ａ
Ａ
Ｄ
Ｄ
Ｃ
Ｃ
Applicable
wire size
Applicable
wire size
Type
Part No.
HRS No.
B
C
D
E
Type
Part No.
HRS No.
B
C
D
E
Loose
Loose
piece RP19-PC-122 113-0268-8
contacts
piece RP19-SC-122 113-0270-0
contacts
1.2 1.35
24 to 30 AWG
1.2 1.35 12 1.18 24 to 30 AWG
11 1.18
Reel
RP19-SC-212 113-0265-0
Reel
contacts
1.6 2.1
1.2 1.35
18 to 22 AWG
24 to 30 AWG
RP19-PC-222 113-0264-7
contacts
RP19-SC-222 113-0266-2
(Note 1) Loose piece contacts are available in 100 piece packs. Reel contacts are available as 10,000 piece reels.
Only contact positions 12 and 13 can be used with 18 to 20 AWG wire.
Other contact positions numbers cannot be used with this wire gauge.
(Note 2) When crimping wires gauge 18 to 22 AWG, make sure that the outer insulation diameter is Ø1.79mm or less.
For wires gauges 24 to 30 AWG, use an outer insulation diameter of Ø1.15 or less.
6
RP13 Series●Plastic Push-Pull Lock Connectors
Panel mounting hole dimensions (for anti-static type)
+0.1
0
3.1
(Flange type)
(Note 1) Above figures show the arrangement viewed from the panel surface. The mating guide of flange type is located on top
the position.
(Note 2) The applicable panel thickness for a flange type receptacle is maximum 4.7mm, as this type is mounted from the back
surface of the panel.
Dip post arrangement sizes for receptacles
Straight dip type
13 contacts
15 contacts
3.15
3.45
2.3
3.45
2.3
0.95
1.25
１
２
３
3
2
1
4
７
４
８
8
5
12
9
11
15
14
13
１２
１３
Ø0.6
Ø0.6
(13 positions)
(15 positions)
1.15
1.15
2.3
3.45
1.15
1.4
1.15
1.4
2.3
3.45
(Remarks) 1. The figures shown above for 13 and 15 contact positions are viewed from the receptacle mating end.
2. A machining tolerance of ± ±.±5 is recommended for the ꢀPC layout dimensions.
Right-angle, dip type
13 contacts
20 contacts
C.L
C.L
11
11
Use a tapping screw for JIS B 1122 M3.
(Screw hole for mounting the connector)
Use a tapping screw for JIS B 1122 M3.
(Screw hole for mounting the connector)
１３
１２
１１
１８
２０
１１
８
１７
１９
１６
７
４
５
１３
１５
Ø0.9
１２
１４
１０
(13 positions)
３
１
７
２
９
４
Ø0.85
６
１
８
(20 positions)
1.15
1.4
1.15
1.4
2.3
3.45
３
2.3
3.45
0.8
2.4
0.8
2.4
4
4
(Remarks) 1. The figures shown above are viewed from the contact insertion end.
2. A machining tolerance of ± ±.±5mm is recommended for the ꢀPC layout dimensions.
7
RP13 Series●Plastic Push-Pull Lock Connectors
Applicable tools
Applicable wire size and
applicable cable diameter
Type
Items
Part No.
HRS No.
Applicable contact
RP13-TC-11
RP13-TC-12
RP13A-TC-11
RP13A-TC-12
150-0024-3
150-0025-6
150-0026-9
150-0027-1
RP13-PC-112
18 to 22 AWG
24 to 28 AWG
18 to 22 AWG
24 to 28 AWG
RP13-PC-121, 122
RP13A-SC-112
RP13A-SC-121, 122
Manual crimping
tool
Manual
RP19-PC-112
RP19-SC-112
RP19-TC-11
150-0048-1
18 to 22 AWG
RP19-PC-122
RP19-SC-122
RP19-TC-12
CM-105C
24 to 28 AWG
Automatic crimping
press
901-0001-0
------------------------
------------------------
RP13-PC-221, 222
RP13A-SC-221, 222
AP105-RP13-2
AP105-RP19-1
AP105-RP19-2
901-2024-0
901-2013-3
901-2014-6
24 to 28 AWG
18 to 22 AWG
24 to 28 AWG
Auto
Applicator
RP19-SC-212
RP19-PC-222
RP19-SC-222
Ø4.6~Ø5.8
Ø7~Ø7.5
RP13A-TC-01
150-0070-0
------------------------
Cable crimping tool
Extraction tool
RP13A-TC-02
RP13-PC-TP
RP13A-SC-TP
150-0071-3
150-0021-5
150-0022-8
------------------------
Male contact
Ø6.3, Ø7.8
------------------------
------------------------
Female contact
Male/female contact for
RP19
RP6-SC-TP
150-0039-0
------------------------
RP13A-TC-02
RP13-TC-11
Cable crimping tool
Manual crimping tool
(handle shape is shown as an example.)
RP6-SC-TP
RP13-PC-TP
RP13A-SC-TP
Automatic crimping press
(Type CM-105C)
Extraction tools
8
RP13 Series●Plastic Push-Pull Lock Connectors
Termination/assembly procedure
Plug
Assembly procedure
Cable
1. First, pass the terminated cable through the cord tube in
the following order: spring, connection sleeve, and cord
bushing, and then crimp and terminate the contacts.
2. Assemble the crimped and terminated contacts to the
contact holes of the P-insulation P case. At this time,
please make sure that the crimped contacts are
securely engaged onto the contact holes of the
P-insulation P case by lightly pulling the cable.
Cord tube
Spring
Round, flat head screw
Arrow view A
Locking collar
3. Attach the metal fitting by clamping to it the cord
bushing and assemble these into the P-insulation P
case. Then crimp the metal fitting by clamping it with
the applicable tool.
A
Cord bushing
4. Next, attach in the following order to the P-insulation P
case: connection sleeve, spring, and cord. Then align
the screw hole of the cord tube and that of the metal
fitting for clamping, and tighten the round flat screw to
the specified torque of 0.2 N•m (2 kg•cm).
Metal fitting for
clamping
5. After the assembly procedure described above has
been completed, test the parts to make sure that the
locking collar moves correctly.
P-insulation
P case
Contact Arrangement
(Standard type)
２
1
3
2
6
4
４
１
１
３
7
Contact
１
０
５
４
７
8
5
9
arrangement
11
15
10
１６
１１
８
11
12
２０
１７
１
２
１３
14
13
No. of contacts
13
15
20
(Anti-static type)
２
１
３
Contact
arrangement
４
８
７
11
12
13
No. of contacts
13
(Remarks) 1. The figures shown above are viewed from the receptacle and jack mating end (plug connection end).
9
RP13 Series●Plastic Push-Pull Lock Connectors
Precautions
This product series uses silver plated contacts. Silver reacts easily to exposure to sulfur gas so the below conditions may
cause tarnishing.
ꢀ・Dusty environments
ꢀ・Area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on.
Example; In close proximity to factory exhaust, automotive emissions, etc.
ꢀ・Close to heaters, or in other areas marked by extreme temperature differences or high humidity.
ꢀ・Close to rubber products includes rubber adhesives.
The Electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins.
Storage
Packing state; Packed in original packing or equivalent container
Temperature -10 to +60ç
Humidity
85% Max
(It is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any
temperature fluctuation)
Please use this products within 6 months of delivery.
(After 6 month, please check the solderbility before use)
“Storage” means long-term storage of the unused products in sealed packaging, prior to assembly to PCB.
10
RP13 Series●Plastic Push-Pull Lock Connectors
MEMO :
11
RP13 Series●Plastic Push-Pull Lock Connectors
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
2300 Warrenville Road, Suite 150,
Downers Grove, IL 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
2841 Junction Ave, Suite 200
San Jose, CA. 95134
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
17197 N. Laurel Park Drive, Suite 253,
Livonia, MI 48152
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
USA:
THE NETHERLANDS:
GERMANY:
HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE
300 Brickstone Square Suite 201,
Andover, MA 01810
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Schoenbergstr. 20, 73760 ostfildern
Phone : +49-711-456002-1
Fax : +49-711-456002-299
http://www.hirose.com/eu/
Phone : +1-978-662-5255
http://www.hirose.com/eu/
GERMANY:
GERMANY:
FRANCE:
HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
Neumeyerstrasse 22-26, 90411 Nurnberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
Bayernstr. 3, Haus C 30855 Langenhagen, Germany 130 Avenue Joseph Kessel, Bat E, 78960
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
Voisins le Bretonneux, France
Phone : +33-1-85764886
Fax : +33-1-85764823
http://www.hirose.com/eu/
http://www.hirose.com/eu/
UNITED KINGDOM:
CHINA:
CHINA:
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
HIROSE ELECTRIC (CHINA) CO., LTD. (SHANGHAI, HEADQUARTERS) HIROSE ELECTRIC (CHINA) CO.,LTD. BEIJING BRANCH
18, Enterprise Center Tower 2, 209# Gong He A1001, Ocean International Center, Building 56# East 4th
Road, Jing’an District, Shanghai, CHINA 200070 Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose.com/cn/
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose.com/cn/
CHINA:
HONG KONG:
TAIWAN:
HIROSE ELECTRIC (CHINA) CO., LTD. SHENZHEN BRANCH HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377
Phone : +852-2803-5338
Fax : +852-2591-6560
Fax : +886-2-2555-7355
http://www.hirose.com/tw/
http://www.hirose.com/cn/
http://www.hirose.com/hk/
KOREA:
SINGAPORE:
INDIA:
HIROSE KOREA CO.,LTD.
143, Gongdan 1-daero, Siheung-si,
Gyeonggi-do, 15084, Korea
Phone : +82-31-496-7000
Fax : +82-31-496-7100
http://www.hirose.co.kr/
HIROSE ELECTRIC SINGAPORE PTE. LTD.
03, Anson Road, #20-01, Springleaf Tower, Office NO.552, Regus-Green Boulevard, Level5, Tower C,
Singapore 079909
Phone : +65-6324-6113
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
Phone : +91-12-660-8018
Fax : +91-120-4804949
65-6324-6123
Fax : +
http://www.hirose.com/sg/
http://www.hirose.com/sg/
INDIA:
MALAYSIA:
THAILAND:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE PENANG REPRESENTATIVE OFFICE
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +91-80-4120 1907
Lepas Penang, 11950, Malaysia
Phone : +604-648-5536
Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +66-2-686-1255
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
Fax : +66-2-686-3433
http://www.hirose.com/sg/
http://www.hirose.com/sg/
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 07/2018. Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
RP143G20R5G00J
Board Euro Connector, 43 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, Receptacle
AMPHENOL
RP143G20R5G00N
Board Euro Connector, 43 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, Receptacle
AMPHENOL
RP143G20R5G00T
Board Euro Connector, 43 Contact(s), 2 Row(s), Male, Right Angle, Solder Terminal, Receptacle
AMPHENOL
©2020 ICPDF网 联系我们和版权申明