411MS8GE [HITTITE]
GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz; 砷化镓MMIC单平衡混频器, 10 - 15 GHz的型号: | 411MS8GE |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz |
文件: | 总6页 (文件大小:179K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC411MS8G / 411MS8GE
v02.0607
GaAs MMIC SINGLE-BALANCED
MIXER, 10 - 15 GHz
Typical Applications
Features
The HMC411MS8G / HMC411MS8GE is ideal for:
• Long Haul Radio Platforms
• Microwave Radio
Conversion Loss: 9 dB
LO/RF Isolation: 27 dB
LO/IF Isolation: 30 dB
Input IP3: +16 dBm
• VSAT
No External Components
MSOP8G SMT Package
9
Functional Diagram
General Description
The HMC411MS8G & HMC411MS8GE are passive
single balanced mixers that operates between 10
GHz and 15 GHz. The HMC411MS8G(E) operate with
LO drive levels between +9 dBm and +15 dBm, and
provide 9 dB conversion loss across the entire speci-
fied frequency band. These mixers require no external
components or bias.
Electrical Specifications, TA = +25° C
IF = 1.45 GHz
LO = +13 dBm
Parameter
Units
Min.
Typ.
Max.
Frequency Range, RF & LO
Frequency Range, IF
Conversion Loss
10.0 - 15.0
GHz
GHz
dB
DC - 3
9
9
12
12
Noise Figure (SSB)
LO to RF Isolation
LO to IF Isolation
dB
20
20
8
27
dB
30
dB
RF to IF Isolation
15 - 20
16
dB
IP3 (Input)
11
5
dBm
dBm
1 dB Compression (Input)
9
* Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 260
HMC411MS8G / 411MS8GE
v02.0607
GaAs MMIC SINGLE-BALANCED
MIXER, 10 - 15 GHz
Conversion Gain vs.
Temperature @ LO = +13 dBm
Isolation @ LO = +13 dBm
0
0
-10
-20
-30
-5
-10
9
+25 C
-15
-20
-40 C
RF/IF
LO/RF
LO/IF
-40
-50
+85 C
9
10
11
12
13
14
15
16
16
5
9
10
11
12
13
14
15
16
16
16
FREQUENCY (GHz)
FREQUENCY (GHz)
Conversion Gain vs. LO Drive
Return Loss @ LO = +13 dBm
0
0
LO = +7 dBm
LO = +9 dBm
LO = +11 dBm
LO = +13 dBm
LO = +15 dBm
-5
-10
-15
-20
-5
-10
RF
LO
-15
-20
9
10
11
12
13
14
15
9
10
11
12
13
14
15
FREQUENCY (GHz)
FREQUENCY (GHz)
Upconverter Performance
Conversion Gain @ LO = +13 dBm
IF Bandwidth @ LO = +13 dBm
0
0
IF CONVERSION GAIN
-5
IF RETURN LOSS
-5
-10
-15
-20
-10
-15
-20
-25
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
9
10
11
12
13
14
15
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 261
HMC411MS8G / 411MS8GE
v02.0607
GaAs MMIC SINGLE-BALANCED
MIXER, 10 - 15 GHz
Input IP3 vs.
Temperature @ LO = +13 dBm*
Input IP3 vs. LO Drive*
25
25
20
15
20
15
9
LO = +11 dBm
LO = +13 dBm
LO = +15 dBm
+25 C
10
5
10
5
-40 C
+85 C
10
11
12
13
14
15
10
11
12
13
14
15
FREQUENCY (GHz)
FREQUENCY (GHz)
Input P1dB vs.
Temperature @ LO = +13 dBm
Input IP2 vs. LO Drive *
45
0
LO = +11 dBm
LO = +13 dBm
LO = +15 dBm
40
35
30
25
20
-5
-10
+25 C
-15
-20
-40 C
+85 C
10
11
12
13
14
15
9
10
11
12
13
14
15
16
FREQUENCY (GHz)
FREQUENCY (GHz)
MxN Spurious @ IF Port
Harmonics of LO
nLO
nLO Spur @ RF Port
mRF
0
1
0
2
5
3
37
42
56
58
>95
4
LO Freq. (GHz)
1
2
3
4
0
1
2
3
4
XX
7
N/A
54
9
25
25
27
27
27
24
18
20
24
33
47
52
46
52
47
61
67
63
53
0
49
44
>95
>95
10.5
66
47
66
>95
>95
57
12
13.5
63
>95
N/A
77
N/A
N/A
N/A
>95
15
RF = 14.45 GHz @ -10 dBm
LO = 13 GHz @ +13 dBm
All values in dBc relative to the IF power level.
Measured as downconverter.
16.5
LO = +13 dBm
All values in dBc below input LO level @ RF port.
* Two-tone input power = 0 dBm each tone, 1 MHz spacing.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 262
HMC411MS8G / 411MS8GE
v02.0607
GaAs MMIC SINGLE-BALANCED
MIXER, 10 - 15 GHz
Absolute Maximum Ratings
RF / IF Input
+15 dBm
LO Drive
+27 dBm
IF DC Current
2 mA
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
-65 to +150 °C
-40 to +85 °C
Class 1A
9
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H411
XXXX
HMC411MS8G
Low Stress Injection Molded Plastic
Sn/Pb Solder
H411
XXXX
MSL1 [2]
HMC411MS8GE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 263
HMC411MS8G / 411MS8GE
v02.0607
GaAs MMIC SINGLE-BALANCED
MIXER, 10 - 15 GHz
Pin Descriptions
Pin Number
Funciton
Description
Interface Schematic
1, 8
GND
Pins and exposed ground slug must connect to RF ground.
This pin is AC coupled
and matched to 50 Ohms.
2
LO
9
3, 4, 6
N/C
Not Connected
This pin is DC coupled. For applications not requiring
operation to DC, this port should be DC blocked externally
using a series capacitor whose value has been chosen to
pass the necessary IF frequency range. For operation to DC,
this pin must not source/sink more than 2 mA of current or
die non-function and possible die failure will result.
5
7
IF
This pin is AC coupled
and matched to 50 Ohms.
RF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 264
HMC411MS8G / 411MS8GE
v02.0607
GaAs MMIC SINGLE-BALANCED
MIXER, 10 - 15 GHz
Evaluation PCB
9
List of Materials for Evaluation PCB 103350 [1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Item
J1 - J2
J3
Description
PCB Mount SMA RF Connector, SRI
PCB Mount SMA Connector, Johnson
HMC411MS8G / HMC411MS8GE
101650 Evaluation Board
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 265
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明