435MS8GE [HITTITE]
SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz; SPDT无反射开关, DC - 4.0 GHz的型号: | 435MS8GE |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | SPDT NON-REFLECTIVE SWITCH, DC - 4.0 GHz |
文件: | 总6页 (文件大小:210K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC435MS8G / 435MS8GE
v03.0607
SPDT NON-REFLECTIVE
SWITCH, DC - 4.0 GHz
Typical Applications
Features
The HMC435MS8G / HMC435MS8GE is ideal for:
• Basestation Infrastructure
• MMDS & 3.5 GHz WLL
High Isolation: 60 dB @ 1 GHz
50 dB @ 2 GHz
Positive Control: 0/+5V
51 dBm Input IP3
• CATV/CMTS
Non-Reflective Design
MS8G SMT Package, 14.8 mm2
• Test Instrumentation
Functional Diagram
General Description
9
The HMC435MS8G & HMC435MS8GE are non-
reflective DC to 4 GHz GaAs MESFET SPDT switches
in low cost 8 lead MSOP8G surface mount packages
with exposed ground paddles. The switch is ideal
for cellular/PCS/3G basestation applications yielding
50 to 60 dB isolation, low 0.8 dB insertion loss and
+50 dBm input IP3. Power handling is excellent
up through the 3.5 GHz WLL band with the switch
offering a P1dB compression point of +31 dBm. On-
chip circuitry allows positive voltage control of 0/+5
Volts at very low DC currents.
Electrical Specifications, TA = +25° C, Vctl = 0/+5 Vdc, 50 Ohm System
Parameter
Frequency
Min.
Typ.
Max.
Units
DC - 2.5 GHz
DC - 3.6 GHz
DC - 4.0 GHz
0.8
1.2
1.5
1.0
1.5
1.8
dB
dB
dB
Insertion Loss
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.6 GHz
DC - 4.0 GHz
56
46
43
37
30
60
50
47
41
35
dB
dB
dB
dB
dB
Isolation (RFC to RF1/RF2)
DC - 2.5 GHz
DC - 3.6 GHz
DC - 4.0 GHz
15
13
11
20
17
15
dB
dB
dB
Return Loss (On State)
Return Loss (Off State)
0.5 - 4.0 GHz
0.5 - 4.0 GHz
16
27
21
31
dB
Input Power for 1 dB Compression
dBm
0.5 - 1.0 GHz
0.5 - 2.5 GHz
0.5 - 4.0 GHz
48
45
41
51
48
45
Input Third Order Intercept
(Two-Tone Input Power = +7 dBm Each Tone)
dBm
Switching Speed
DC - 4.0 GHz
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
40
60
ns
ns
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 256
HMC435MS8G / 435MS8GE
v03.0607
SPDT NON-REFLECTIVE
SWITCH, DC - 4.0 GHz
Return Loss
Insertion Loss
0
0
-5
-1
-2
-3
-4
-5
RFC
RF1, RF2 OFF
RF1, RF2 ON
-10
-15
-20
-25
-30
+ 25C
+ 85C
- 40C
9
0
0.5
1
1.5
2
2.5
3
3.5
4
0
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
FREQUENCY (GHz)
Isolation Between
Isolation Between Ports RF1 and RF2
Ports RFC and RF1 / RF2
0
0
-10
-10
RF1
RF2
RFC - RF1 ON
-20
-20
-30
-40
-50
-60
-70
RFC - RF2 ON
-30
-40
-50
-60
-70
0
0.5
1
1.5
2
2.5
3
3.5
4
0
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
FREQUENCY (GHz)
0.1 and 1 dB Input Compression Point
Input Third Order Intercept Point
35
60
58
56
54
52
50
48
46
44
42
40
+25 C
+85 C
-40 C
30
25
1 dB Compression Point
20
0.1 dB Compression Point
15
0
0.5
1
1.5
2
2.5
3
3.5
4
0
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 257
HMC435MS8G / 435MS8GE
v03.0607
SPDT NON-REFLECTIVE
SWITCH, DC - 4.0 GHz
Control Voltages
Absolute Maximum Ratings
*Control Input Tolerances are 0.2 Vdc
Control Voltage Range
-0.5 to +7.5 Vdc
-65 to +150 °C
-40 to +85 °C
+31 dBm
State
Low
Bias Condition*
Storage Temperature
0 Vdc @ 25 μA Typical
+5 Vdc @ 25 μA Typical
Operating Temperature
RF Input Power Vctl = 0/+5V
ESD Sensitivity (HBM)
High
Class 1A
Truth Table
Control Input
Signal Path State
RFC to:
RF1
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
A
B
Low
High
High
Low
RF2
9
DC blocks are required at ports RFC, RF1, RF2.
Do not operate continuously at RF power input greater than
1 dB compression and do not “Hot Switch” power levels
greater than +24 dBm (control = 0/+5 Vdc).
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 258
HMC435MS8G / 435MS8GE
v03.0607
SPDT NON-REFLECTIVE
SWITCH, DC - 4.0 GHz
Outline Drawing
9
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H435
XXXX
HMC435MS8G
HMC435MS8GE
Low Stress Injection Molded Plastic
Sn/Pb Solder
H435
XXXX
MSL1 [2]
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 259
HMC435MS8G / 435MS8GE
v03.0607
SPDT NON-REFLECTIVE
SWITCH, DC - 4.0 GHz
Pin Descriptions
Pin Number
Function
A
Description
See truth and control voltage tables.
Interface Schematic
1
2
B
See truth and control voltage tables.
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
3, 5, 8
4
RFC, RF1, RF2
N/C
Not Connected
9
Package bottom has exposed metal paddle that must
be connected to PCB RF ground as well.
6, 7
GND
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 260
HMC435MS8G / 435MS8GE
v03.0607
SPDT NON-REFLECTIVE
SWITCH, DC - 4.0 GHz
Evaluation PCB
9
List of Materials for Evaluation PCB 105143 [1]
The circuit board used in the final application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 ohm impedance and the package ground leads
and backside ground slug should be connected
directly to the ground plane similar to that shown
above. The evaluation circuit board shown above is
available from Hittite Microwave Corporation upon
request.
Item
Description
J1 - J3
J4 - J7
C1 - C3
R1 - R2
PCB Mount SMA RF Connector
DC Pin
100 pF Capacitor, 0402 Pkg.
100 Ohm Resistor, 0402 Pkg.
HMC435MS8G / HMC435MS8GE
SPDT Switch
U1
[2]
PCB
104122 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Note: Pin J6 is unused and need not be connected.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 261
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明