438MS8GE [HITTITE]
SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7.0 GHz; SMT砷化镓HBT MMIC除以5 , DC - 7.0 GHz的型号: | 438MS8GE |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | SMT GaAs HBT MMIC DIVIDE-BY-5, DC - 7.0 GHz |
文件: | 总6页 (文件大小:278K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC438MS8G / 438MS8GE
v03.0705
SMT GaAs HBT MMIC
DIVIDE-BY-5, DC - 7.0 GHz
Typical Applications
Features
Prescaler for DC to C Band PLL Applications:
• UNII, Point-to-Point & VSAT Radios
• 802.11a & HiperLAN WLAN
• Fiber Optic
SSB Phase Noise: -153 dBc/Hz @100KHz
6
Wide Bandwidth
Output Power: -1 dBm
Single DC Supply: +5V @ 80 mA
MS8G SMT Package
• Cellular / 3G Infrastructure
Functional Diagram
General Description
The HMC438MS8G & HMC438MS8GE are low noise
Divide-by-5 Static Dividers utilizing InGaP GaAs HBT
technology in low cost 8 lead surface mount plas-
tic packages. This device operates from DC (with a
square wave input) to 7.0 GHz input frequency from a
single +5.0V DC supply. The low additive SSB phase
noise of -153 dBc/Hz at 100 kHz offset helps the user
maintain good system noise performance.
Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Parameter
Maximum Input Frequency
Minimum Input Frequency
Input Power Range
Conditions
Min.
7.0
Typ.
7.5
0.1
-15
-15
-15
-1
Max.
Units
GHz
GHz
dBm
dBm
dBm
dBm
dBm
dBc/Hz
ps
Sine Wave Input [1]
Fin= 1 to 5 GHz
Fin= 5 to 6 GHz
Fin= 6 to 7 GHz
-12
-12
-10
-4
+12
+10
+5
Output Power
Reverse Leakage
Both RF Outputs Terminated
Pin= 0 dBm, Fin= 6 GHz
-50
-153
100
80
SSB Phase Noise (100 kHz offset)
Output Transition Time
Supply Current (Icc)
Pin= 0 dBm, Fout= 882 MHz
mA
1. Divider will operate down to DC for square-wave input signal.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 90
HMC438MS8G / 438MS8GE
v03.0705
SMT GaAs HBT MMIC
DIVIDE-BY-5, DC - 7.0 GHz
Input Sensitivity Window, T= 25 °C
Input Sensitivity Window vs. Temperature
20
15
10
5
20
15
10
6
5
0
Min Pin +25 C
Max Pin +25 C
Min Pin +85 C
Max Pin +85 C
Min Pin -40 C
Max Pin -40 C
Recommended
Operating Window
0
-5
-5
-10
-15
-20
-10
-15
-20
0
1
2
3
4
5
6
7
7
7
8
8
8
9
9
9
0
1
2
3
4
5
6
7
8
9
INPUT FREQUENCY (GHz)
INPUT FREQUENCY (GHz)
SSB Phase Noise Performance,
Pin= 0 dBm, Fin= 6GHz, T= 25 °C
Output Power vs. Temperature
4
0
-10
-20
-30
-40
-50
-60
-70
-80
3
2
1
+25 C
+85 C
-40 C
0
-1
-2
-3
-4
-5
-6
-90
-100
-110
-120
-130
-140
-150
-160
-170
0
1
2
3
4
5
6
102
103
104
105
106
107
INPUT FREQUENCY (GHz)
OFFSET FREQUENCY (Hz)
Output Harmonic
Content, Pin= 0 dBm, T= 25 °C
Reverse Leakage, Pin= 0 dBm, T= 25 °C
0
-10
-20
-30
0
Both Output Ports Terminated
-10
One Output Port Terminated
-20
-30
-40
-50
-60
-70
Pfeedthru
-40
2nd Harmonic
-50
0
1
2
3
4
5
6
0
1
2
3
4
5
6
7
8
9
INPUT FREQUENCY (GHz)
INPUT FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 91
HMC438MS8G / 438MS8GE
v03.0705
SMT GaAs HBT MMIC
DIVIDE-BY-5, DC - 7.0 GHz
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
Absolute Maximum Ratings
300
200
100
0
RF Input (Vcc= +5V)
+13 dBm
6
Vcc
+5.5V
Maximum Channel Temperature
135 °C
Continuous Pdiss (T=85 °C)
(derate 11.3mW/°C above 92 °C)
485mW
-100
-200
-300
-400
-500
Storage Temperature
Operating Temperature
-65 to +150 °C
-40 to +85 °C
DC blocking capacitors are required at RF input and RF output ports.
Choose value for lowest frequency of operation.
22.5
23
23.5
24
24.5
25
25.5
Typical Supply Current vs. Vcc
TIME (ns)
Vcc (V)
Icc (mA)
4.75
75
5.0
80
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
5.25
87
Note: Divider will operate over full voltage range shown above
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H438
XXXX
HMC438MS8G
HMC438MS8GE
Low Stress Injection Molded Plastic
Sn/Pb Solder
H438
XXXX
MSL1 [2]
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 92
HMC438MS8G / 438MS8GE
v03.0705
SMT GaAs HBT MMIC
DIVIDE-BY-5, DC - 7.0 GHz
Pin Description
Pin Number
Function
Description
Interface Schematic
6
1
Vcc
Supply voltage 5V 0.25V.
2
IN
RF input must be DC blocked.
RF input 180° out of phase with pin 2 for differential
operation. AC ground for single ended operation.
3
IN
All ground leads and ground paddle must be soldered
to PCB RF/DC ground.
4, 5
GND
6
OUT
Divided output 180° out of phase with pin 7.
7
8
OUT
Divided Output.
No Connection
N/C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 93
HMC438MS8G / 438MS8GE
v03.0705
SMT GaAs HBT MMIC
DIVIDE-BY-5, DC - 7.0 GHz
Evaluation PCB
6
List of Materials for Evaluation PCB 105786 [1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and backside ground slug should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available
from Hittite upon request. This evaluation board is
designed for single ended input testing. J2 and J3
provide differential output signals.
Item
Description
J1 - J3
J4, J5
C1 - C4
C5
PCB Mount SMA RF Connector
DC Pin
100 pF Capacitor, 0402 Pkg.
10,000 pF Capacitor, 0603 Pkg.
4.7 μF Tantalum Capacitor
C6
HMC438MS8G / HMC438MS8GE
Divide-by-5
U1
[2]
PCB
105697 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 94
HMC438MS8G / 438MS8GE
v03.0705
SMT GaAs HBT MMIC
DIVIDE-BY-5, DC - 7.0 GHz
Application Circuit
6
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
6 - 95
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明