538LP4E [HITTITE]
600° ANALOG PHASE SHIFTER, 6 - 15 GHz; 600 °模拟移相器6 - 15 GHz的型号: | 538LP4E |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | 600° ANALOG PHASE SHIFTER, 6 - 15 GHz |
文件: | 总6页 (文件大小:230K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC538LP4 / 538LP4E
v02.0209
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
Typical Applications
Features
The HMC538LP4 / HMC538LP4E is ideal for:
Available as Lead Free
Wide Bandwidth: 6 - 15 GHz
>600° Phase Shift
• Fiber Optics
• Military
Single Positive Voltage Control
QFN Leadless SMT Package, 16 mm2
• Test Equipment
Functional Diagram
General Description
The HMC538LP4(E) are Analog Phase Shift-
ers which are controlled via an analog control
voltage from 0 to +5V. The HMC538LP4(E)pro-
vides a continuously variable phase shift of 0 to
800 degrees at 6 GHz, and 0 to 450 degrees at
16 GHz, with consistent insertion loss versus phase
shift. The phase shift is monotonic with respect to
control voltage. The control port has a modulation
bandwidth of 50 MHz. The low insertion loss and
compact size enable this part to be used in a wide
range of applications, including the phase adjustment
of clocks in fiber optic systems and test equipment.
THe HMC538LP4(E) is housed in leadless QFN sur-
face mount packages and are available in both stan-
dard and RoHS compliant versions.
10
Electrical Specifications, TA = +25° C, 50 Ohm System
Parameter
Frequency (GHz)
Min.
Typ.
Max.
11
Units
6 - 10 GHz
10 - 15 GHz
600
360
800
600
degrees
degrees
Phase Shift Range
Insertion Loss
6 - 15 GHz
6 - 15 GHz
6 - 15 GHz
6 - 15 GHz
6 - 15 GHz
6 - 15 GHz
8
7
dB
dB
Return Loss (Input and Output)
Control Voltage Range
0 - 5
50
Volt
Modulation Bandwidth
MHz
Phase Voltage Sensitivity
120
0.5
deg /Volt
deg /°C
Insertion Phase Temperature Sensitivity
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 2
HMC538LP4 / 538LP4E
v02.0209
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
Insertion Loss vs. Control Voltage @ 11 GHz
Phase Shift vs. Control Voltage
0
900
+25C
+85C
-40C
750
600
450
-2
-4
-6
300
6 GHz
11 GHz
15 GHz
-8
150
0
-10
0
1
2
3
4
5
0
1
2
3
4
5
Vctl (Vdc)
Vctl (Vdc)
10
Phase Shift vs. Frequency @ Vctl = 5V
(Relative to Vctl = 0V)
Insertion Loss vs. Frequency
900
0
750
600
-4
-8
450
-12
-16
-20
0V
1V
2V
3V
4V
5V
+25C
+85C
-40C
300
150
0
5
6
7
8
9
10 11 12 13 14 15 16
5
6
7
8
9
10 11 12 13 14 15 16
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss vs. Frequency,
Output Return Loss vs. Frequency,
Vctl = 0 to +5V
Vctl = 0 to +5V
0
0
-5
-10
-15
-20
-5
-10
-15
-20
5
6
7
8
9
10 11 12 13 14 15 16
5
6
7
8
9
10 11 12 13 14 15 16
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 3
HMC538LP4 / 538LP4E
v02.0209
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
Second Harmonics vs. Control Voltage,
Pin = -10 dBm
Input IP3 vs. Control Voltage
90
35
6 GHz
11 GHz
15 GHz
30
25
20
15
10
5
75
60
45
30
6 GHz
11 GHz
15 GHz
15
0
0
0
1
2
3
4
5
0
1
2
3
4
5
25
5
Vctl (Vdc)
Vctl (Vdc)
10
Insertion Loss vs. Pin @ 7 GHz
Insertion Loss vs. Pin @ 11 GHz
0
0
0V
2V
5V
-2
-4
-2
-4
0V
2V
5V
-6
-6
-8
-8
-10
-10
-15
-10
-5
0
5
10
15
20
25
-15
-10
-5
0
5
10
15
20
INPUT POWER (dBm)
INPUT POWER (dBm)
Insertion Loss vs. Pin @ 15 GHz
Phase Shift vs. Pin @ 7 GHz
0
50
0V
2V
5V
40
-2
-4
0V
2V
5V
30
20
-6
10
0
-8
-10
-10
-15
-10
-5
0
5
10
15
20
25
-20
-15
-10
-5
0
INPUT POWER (dBm)
INPUT POWER (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 4
HMC538LP4 / 538LP4E
v02.0209
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
Phase Shift vs. Pin @ 11 GHz
Phase Shift vs. Pin @ 15 GHz
20
10
0V
2V
5V
15
6
2
0V
2V
5V
10
5
-2
0
-6
-5
-10
-20
-15
-10
-5
0
5
-20
-15
-10
-5
0
5
INPUT POWER (dBm)
INPUT POWER (dBm)
10
Absolute Maximum Ratings
Control Voltage (Vctl)
-1 Vdc to + 8 Vdc
Input Power (RFin)
+25 dBm
Channel Temperature (Tc)
150 °C
Continuous Pdiss (T = 85 °C)
(derate 21 mW/°C above 85 °C)
1.36 W
Thermal Resistance
(junction to ground paddle)
48 °C/W
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
-65 to +150 °C
-40 to +85 °C
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 5
HMC538LP4 / 538LP4E
v02.0209
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
Outline Drawing
10
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H538
XXXX
HMC538LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
H538
XXXX
MSL1 [2]
HMC538LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 2, 4-15,
17-20, 22-24
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
N/C
3
RFIN
Port is DC blocked.
Port is DC blocked.
16
RFOUT
Phase shift control pin. Application of a voltage between 0 and 5 volts causes
the transmission phase to change. The DC equivalent circuit is a series con-
nected diode and resistor.
21
Vctl
Ground: Backside of package has exposed metal ground slug that must be
connected to ground thru a short path. Vias under the device are required.
GND
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 6
HMC538LP4 / 538LP4E
v02.0209
600° ANALOG PHASE SHIFTER,
6 - 15 GHz
Evaluation PCB
10
List of Materials for Evaluation PCB 108812 [1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
Item
Description
J1 - J3
PCB Mount SMA RF Connector
HMC538LP4 / HMC538LP4E
Analog Phase Shifter
U1
[2]
PCB
111296 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
10 - 7
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明