HMC-C042 [HITTITE]
GaAs MMIC I/Q MIXER MODULE 8.5 - 13.5 GHz; 砷化镓MMIC I / Q混频器模块8.5 - 13.5 GHz的型号: | HMC-C042 |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | GaAs MMIC I/Q MIXER MODULE 8.5 - 13.5 GHz |
文件: | 总6页 (文件大小:286K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC-C042
v01.0507
GaAs MMIC I/Q MIXER MODULE
8.5 - 13.5 GHz
Features
Wide IF Bandwidth: DC - 2 GHz
Image Rejection: 28 dB
LO to RF Isolation: 38 dB
High Input IP3: +25 dBm
Hermetically Sealed Module
Field Replaceable SMA Connectors
-55 to +85 °C Operating Temperature
Typical Applications
The HMC-C042 is ideal for:
5
• Point-to-Point Radios
• Point-to-Multi-Point Radios & VSAT
• Test Equipment & Sensors
• Military End-Use
General Description
The HMC-C042 is a passive I/Q MMIC mixer housed
in a miniature hermetic module which can be used as
either an Image Reject Mixer or a Single Sideband
Upconverter. The module utilizes two standard
Hittite double balanced mixer cells and a 90 degree
hybrid fabricated on a GaAs MESFET process. A low
frequency quadrature hybrid was used to produce a
100 MHz USB IF output. This MMIC based module is
a more reliable and consistent alternative to hybrid
style I/Q Mixers and Single Sideband Converter
assemblies. The module features removable SMA
connectors which can be detached to allow direct
connection of the I/O pins to a microstrip or coplanar
circuit.
Functional Diagram
Electrical Specifications, TA = +25° C, IF= 100 MHz, LO = +19 dBm*
Parameter
Min.
Typ.
8.5 - 13.5
DC - 2
8
Max.
10
Units
GHz
GHz
dB
Frequency Range, RF/LO
Frequency Range, IF
Conversion Loss (As IRM)
Image Rejection
17
28
dB
1 dB Compression (Input)
LO to RF Isolation
LO to IF Isolation
+17
dBm
dB
35
20
38
25
dB
IP3 (Input)
+25
0.6
dBm
dB
Amplitude Balance
Phase Balance
6
Deg
* Unless otherwise noted, all measurements performed as downconverter.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 34
HMC-C042
v01.0507
GaAs MMIC I/Q MIXER MODULE
8.5 - 13.5 GHz
Data taken As IRM With External IF Hybrid
Conversion Gain vs. Temperature
Image Rejection vs. Temperature
0
50
40
30
-5
-10
20
+25 C
+85 C
-55 C
-15
-20
+25C
+85C
-55C
10
0
5
8
9
10
11
12
13
13
13
14
14
14
8
9
10
11
12
13
14
14
14
RF FREQUENCY (GHz)
RF FREQUENCY (GHz)
Conversion Gain vs. LO Drive
Return Loss
0
0
-5
-10
-15
-20
-25
-5
-10
+17dBm
+19dBm
+21dBm
-15
-20
RF
LO
8
9
10
11
12
8
9
10
11
12
13
RF FREQUENCY (GHz)
FREQUENCY (GHz)
Input P1dB vs. Temperature
Input IP3 vs. LO Drive
24
35
22
20
18
30
25
20
16
15
+25C
+85C
-55C
14
12
10
LO = +15 dBm
LO = +17 dBm
10
LO = +19 dBm
LO = +21 dBm
5
8
9
10
11
12
8
9
10
11
12
13
RF FREQUENCY (GHz)
RF FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 35
HMC-C042
v01.0507
GaAs MMIC I/Q MIXER MODULE
8.5 - 13.5 GHz
Quadrature Channel Data Taken Without IF Hybrid
Isolations
IF Bandwidth*
-10
0
LO/IF2
-20
-5
-10
-15
-30
-40
-50
-60
LO/IF1
RF/IF1
LO/RF
RF/IF2
RETURN LOSS
CONVERSION GAIN
-20
5
8
9
10
11
12
13
14
0.5
1
1.5
2
2.5
3
3.5
14
14
RF FREQUENCY (GHz)
IF FREQUENCY (GHz)
Amplitude Balance vs. LO Drive
Phase Balance vs. LO Drive
4
15
10
LO = +17 dBm
LO = +19 dBm
LO = +21 dBm
LO = +17 dBm
LO = +19 dBm
LO = +21 dBm
2
0
5
0
-5
-2
-4
-10
-15
8
9
10
11
12
13
14
8
9
10
11
12
13
RF FREQUENCY (GHz)
RF FREQUENCY (GHz)
Upconverter Performance Conversion
Gain vs. LO Drive*
Upconverter Performance Sideband
Rejection vs. LO Drive*
0
0
-10
LO = +17 dBm
LO = +19 dBm
LO = +21 dBm
-5
-20
-10
-30
-40
-50
-60
+17 dBm
+19 dBm
+21 dBm
-15
-20
8
9
10
11
12
13
14
8
9
10
11
12
13
RF FREQUENCY (GHz)
RF FREQUENCY (GHz)
* Conversion gain data taken with external IF hybrid
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 36
HMC-C042
v01.0507
GaAs MMIC I/Q MIXER MODULE
8.5 - 13.5 GHz
Harmonics of LO
MxN Spurious Outputs
nLO Spur at RF Port
nLO
LO Freq. (GHz)
1
2
3
4
mRF
0
1
2
16
3
4
8.5
9.5
34
35
36
35
36
38
48
47
51
57
52
51
50
57
62
67
67
64
77
64
53
45
47
xx
0
1
2
3
4
xx
33
86
96
89
-11
0
22
62
78
91
101
38
53
76
101
96
95
10.5
77
95
94
94
11.5
102
107
12.5
13.5
RF = 10.6 GHz @ -10 dBm
LO = 10.5 GHz @ +19 dBm
Data taken without IF hybrid
LO = +19 dBm
Values in dBc below input LO level measured at RF Port.
5
All values in dBc below IF power level
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Absolute Maximum Ratings
RF / IF Input
+20 dBm
+27 dBm
150°C
LO Drive
Channel Temperature
Continuous Pdiss (T=85°C)
(derate 7.1 mW/°C above 85°C)
460 mW
Thermal Resistance (RTH
(junction to die bottom)
)
140 °C/W
Storage Temperature
Operating Temperature
-65 to +150 °C
-55 to +85 deg °C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 37
HMC-C042
v01.0507
GaAs MMIC I/Q MIXER MODULE
8.5 - 13.5 GHz
Outline Drawing
5
Typical Package Weight
Package
20.0 gms
Spacer
2.6 gms
+/- 1 gms Tolerance
NOTES:
1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™
2. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER
ELECTROLYTIC NICKEL 75 MICROINCHES MIN.
3. SPACER MATERIAL: NICKEL PLATED ALUMINUM
4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. TOLERANCES 0.010 [0.25] UNLESS OTHERWISE SPECIFIED.
6. FIELD REPLACEABLE SMA CONNECTORS.
TENSOLITE 5602-5CCSF OR EQUIVALENT.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 38
HMC-C042
v01.0507
GaAs MMIC I/Q MIXER MODULE
8.5 - 13.5 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
This pin is AC coupled and matched to
50 Ohms from 8.5 to 13.5 GHz.
1
RF
IF1
This pin is DC coupled. For applications not requir-
ing operation to DC, this port should be DC blocked
externally using a series capacitor whose value has
been chosen to pass the necessary IF frequency
range. For operation to DC, this pin must not source/
sink more than 3mA of current or part non-function
and possible part failure will result.
2
3
4
IF2
LO
5
This pin is AC coupled and matched to
50 Ohms from 8.5 to 13.5 GHz.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 39
相关型号:
©2020 ICPDF网 联系我们和版权申明