HMC400MS8ETR [HITTITE]

Double Balanced Mixer;


型号：	HMC400MS8ETR
厂家：	HITTITE MICROWAVE CORPORATION
描述：	Double Balanced Mixer 射频和微波射频混频器微波混频器局域网
文件：	总8页 (文件大小：332K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

HMC400MS8 / 400MS8E

v02.0705

HIGH IP3 GaAs MMIC

MIXER, 1.7 - 2.2 GHz

Designer’s Kit

Available

Typical Applications

Features

High Dynamic Range Infrastructure:

• GSM, GPRS & EDGE

+35 dBm Input IP3

Conversion Loss: 8.8 dB

• CDMA & W-CDMA

No External Components

• Cable Modem Termination Systems

Ultra Small MSOP Package: 14.8mm²

Included in the HMC-DK003 Designer’s Kit

Functional Diagram

General Description

The HMC400MS8 & HMC400MS8E are high dynamic

range passive MMIC mixers in plastic surface mount

8 lead Mini Small Outline Packages (MSOP) covering

1.7 to 2.2 GHz. Excellent input IP3 performance of

+36 dBm for down conversion and +29 dBm for up

conversion is provided for 2.5G & 3G GSM/CDMA

based UMTS or PCS applications at an LO drive of

+17dBm. With a 1dB compression of +21 dBm, the RF

port will accept a wide range of input signal levels.

Conversion loss is 8.5dB typical and LO isolations

are maintained at 22 to 33 dB. This miniature single-

ended monolithic GaAs FET mixer does not require

any external components or bias. The 50 to 300 MHz

IF frequency response will satisfy many UMTS/PCS

transmit or receive frequency plans conﬁgured for low

side LO. The HMC400MS8 & HMC400MS8E input

IP3 performance coupled with its high P1dB rivals

traditional active FET mixers while offering a much

smaller 14.8mm²standard IC footprint and no DC bias.

Electrical Specifications, T_A= +25°C, LO = +17dBm, IF = 200 MHz*

Parameter

Frequency Range, RF

Min.

Typ.

Max.

Min.

Typ.

1.8 - 2.0

1.5 - 1.95

DC - 300

8.8

Max.

Min.

Typ.

2.0 - 2.2

1.7 - 2.15

DC - 300

8.8

Max.

Units

GHz

MHz

1.7 - 1.8

Frequency Range, LO

Frequency Range, IF

Conversion Loss

1.4 - 1.75

DC - 300

10.5

Noise Figure (SSB)

LO to RF Isolation

8.8

LO to IF Isolation

IP3 (Input)

dBm

1 dB Gain Compression (Input)

LO Input Drive Level (Typical)

+16 to +18

*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7 - 272

HMC400MS8 / 400MS8E

v02.0705

HIGH IP3 GaAs MMIC

MIXER, 1.7 - 2.2 GHz

Conversion Gain vs.

Isolation @ LO = +17 dBm

Temperature @ LO = +17 dBm

RF TO IF

LO TO RF

LO TO IF

-5

-10

-20

-30

-40

-10

+ 25C

+ 85C

- 40C

-15

-20

1.7

1.8

1.9

2.1

2.2

2.3

1.7

1.8

1.9

2.1

2.2

2.3

RF FREQUENCY (GHz)

FREQUENCY (GHz)

Return Loss @ LO = +17 dBm

Conversion Gain vs. LO Drive

-5

-10

-15

-5

-10

-20

LO = +15 dBm

LO = +16 dBm

-15

LO = +17 dBm

LO = +19 dBm

-25

-20

-30

1.7

1.8

1.9

2.1

2.2

1.7

1.8

1.9

2.1

2.2

2.3

RF FREQUENCY (GHz)

Upconverter Performance

If Bandwidth @ LO = +17 dBm

Conversion Gain @ LO = +17 dBm

-5

-10

-15

-20

-5

-10

CONVERSION GAIN

RETURN LOSS

-15

-20

1.7

1.8

1.9

2.1

2.2

100 150 200 250 300 350 400 450 500

IF FREQUENCY (MHz)

RF FREQUENCY (GHz)

*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7 - 273

HMC400MS8 / 400MS8E

v02.0705

HIGH IP3 GaAs MMIC

MIXER, 1.7 - 2.2 GHz

Input IP3 vs.

IF Frequency, RF = 1.75 GHz

Temperature, LO = +17 dBm

LO = +15dBm

+ 25C

+ 85C

- 40C

LO = +16dBm

LO = +17dBm

LO = +19dBm

120

150

180

210

240

270

300

1.7

1.8

1.9

2.1

2.2

2.3

IF FREQUENCY (MHz)

RF FREQUENCY (GHz)

Input IP3 vs.

IF Frequency, RF = 1.95 GHz

Input IP3 vs. LO Drive

LO = +15 dBm

+ 15dBm

+ 16dBm

+ 17dBm

+ 19dBm

LO = +16 dBm

LO = +17 dBm

LO = +19 dBm

120

150

180

210

240

1.7

1.8

1.9

2.1

IF FREQUENCY (MHz)

RF FREQUENCY (GHz)

Input IP3 vs.

IF Frequency, RF = 2.15 GHz

Upconverter IP3 vs.

LO Drive, IF = 200 MHz

LO = +15 dBm

LO = +16 dBm

LO = +17 dBm

LO = +19 dBm

LO = +15dBm

LO = +16dBm

LO = +17dBm

LO = +19dBm

120

150

180

210

240

1.7

1.8

1.9

2.1

IF FREQUENCY (MHz)

RF FREQUENCY (GHz)

*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7 - 274

HMC400MS8 / 400MS8E

v02.0705

HIGH IP3 GaAs MMIC

MIXER, 1.7 - 2.2 GHz

Input IP2 vs.

Input IP2 vs. LO Drive @ LO = +17 dBm

Temperature @ LO = +17 dBm

+ 15 dBm

+ 25C

+ 85C

- 40C

+ 16 dBm

+ 17 dBm

+ 19 dBm

1.7

1.8

1.9

2.1

2.2

2.3

1.7

1.8

1.9

2.1

2.2

2.3

RF FREQUENCY (GHz)

Input P1dB vs.

Temperature @ LO = +17 dBm

MxN Spurious Outputs

nLO

mRF

-11

+ 25C

+ 85C

- 40C

RF Freq = 2 GHz @ -10 dBm

LO Freq = 1.8 GHz @ +17 dBm

All values in dBc relative to the IF output power.

1.7

1.8

1.9

2.1

2.2

2.3

RF FREQUENCY (GHz)

Harmonics of LO

Absolute Maximum Ratings

nLO Spur @ RF Port

RF/IF Input

+27 dBm

LO Freq (GHz)

LO Drive

+27 dBm

1.4

Storage Temperature

Operating Temperature

IF DC Current

-65 to +150 °C

-40 to +85 °C

40 mA

1.55

1.7

1.85

2.15

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

LO = +17 dBm

All values are in dBc below input LO level @ RF port.

*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 200 MHz.

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7 - 275

HMC400MS8 / 400MS8E

v02.0705

HIGH IP3 GaAs MMIC

MIXER, 1.7 - 2.2 GHz

Outline Drawing

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS]

3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.

4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.

5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.

Package Information

Part Number

Package Body Material

Lead Finish

MSL Rating

MSL1 ^[1]

Package Marking ^[3]

H400

XXXX

HMC400MS8

Low Stress Injection Molded Plastic

Sn/Pb Solder

H400

XXXX

MSL1 ^[2]

HMC400MS8E

RoHS-compliant Low Stress Injection Molded Plastic

100% matte Sn

[1] Max peak reﬂow temperature of 235 °C

[2] Max peak reﬂow temperature of 260 °C

[3] 4-Digit lot number XXXX

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7 - 276

HMC400MS8 / 400MS8E

v02.0705

HIGH IP3 GaAs MMIC

MIXER, 1.7 - 2.2 GHz

Pin Descriptions

Pin Number

Function

Description

Interface Schematic

This pin is AC coupled & matched to 50 Ohms

from 1.4 to 2.2 GHz. Blocking capacitors are required

if line potential is not equal to 0V.

2, 4

N/C

Not connected.

3, 6, 7

GND

This pin must be connected to RF ground.

This pin is DC coupled. For applications not requiring

operation to DC this port should be DC blocked externally

using a series capacitor. Choose value of capacitor to pass

IF frequency desired. For operation to DC, this pin must

not sink/source more than 40 mA of current or failure may

result.

IF Port

This pin is DC coupled & matched to 50 Ohm

from 1.7 to 2.2 GHz

RF Port

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7 - 277

HMC400MS8 / 400MS8E

v02.0705

HIGH IP3 GaAs MMIC

MIXER, 1.7 - 2.2 GHz

Evaluation PCB

List of Materials for Evaluation PCB 101830 ^[1]

The circuit board used in the ﬁnal application should

use RF circuit design techniques. Signal lines

should have 50 ohm impedance while the package

ground leads and exposed paddle should be con-

nected directly to the ground plane similar to that

shown. A sufﬁcient number of VIA holes should be

used to connect the top and bottom ground planes.

The evaluation circuit board shown is available from

Hittite upon request.

Item

J1 - J3

Description

PCB Mount SMA RF Connector

HMC400MS8 / HMC400MS8E Mixer

101828 Eval Board

[2]

PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7 - 278

HMC400MS8 / 400MS8E

v02.0705

HIGH IP3 GaAs MMIC

MIXER, 1.7 - 2.2 GHz

Notes:

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

7 - 279

相关型号：