HMC401QS16G [HITTITE]
Ku-BAND MMIC VCO with DIVIDE-BY-8, 13.2 - 13.5 GHz; Ku波段MMIC VCO与除以8 , 13.2 - 13.5 GHz的型号: | HMC401QS16G |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | Ku-BAND MMIC VCO with DIVIDE-BY-8, 13.2 - 13.5 GHz |
文件: | 总8页 (文件大小:305K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC401QS16G
v01.0402
MICROWAVE CORPORATION
Ku-BAND MMIC VCO with
DIVIDE-BY-8, 13.2 - 13.5 GHz
Typical Applications
Features
Low noise MMIC VCO w/Divide-by-8
for Ku-Band applications such as:
Pout: -7 dBm
Phase Noise: -105 dBc/Hz @100 KHz Typ.
No External Resonator Needed
Single Supply: 5V @ 290 mA
QSOP16G SMT Package
• Pt to Pt Radios
• Multi-Pt Radios / LMDS
• VSAT
Functional Diagram
General Description
The HMC401QS16G is a GaAs InGaP Hetero-
junction Bipolar Transistor (HBT) MMIC VCO.The
HMC401QS16G integrates a resonator, negative
resistance device, varactor diode and divide-by-8
prescaler.The VCO’s phase noise performance is
excellent over temperature, shock, and process
due to the oscillator’s monolithic structure. Power
output is -7 dBm typical from a 5V supply voltage.
The voltage controlled oscillator is packaged in a
low cost, surface mount 16 leaded QSOP pack-
age with an exposed base for improved RF and
thermal performance.
15
Electrical Specifications,TA = +25° C, Vcc1, Vcc2 = +5V
Parameter
Min.
Typ.
Max.
Units
GHz
Frequency Range
Power Output
13.2 - 13.5
FR Output
Divided Output
-10
-9
-7
-6
dBm
dBm
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RF Output
-105
dBc/Hz
V
Tune Voltage
Vtune
0
10
10
Supply Current
Icc1 (Digital)
Icc2 (RF)
65
225
mA
mA
Tune Port Leakage Current (Vtune= 10V)
Output Return Loss
µA
dB
2
Harmonics/Subharmonics
1/2
3/2
2nd
5/2
-7
dBc
dBc
dBc
dBc
-28
-17
-40
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= 5V
Frequency Drift Rate
0.6
5
MHz pp
MHz/V
1.5
MHz/°C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
15 - 58
HMC401QS16G
v01.0402
MICROWAVE CORPORATION
Ku-BAND MMIC VCO with
DIVIDE-BY-8, 13.2 - 13.5 GHz
GaAs MMIC SUB-HARMONICALLY FPrUeqMuePnEcyDvMs.TIXunEinRg V1o7lta-g2e5, VcGc=H+z5V
Frequency vs.Tuning Voltage,T= 25°C
13.8
13.7
13.6
13.5
13.4
13.3
13.2
13.1
13.8
13.7
13.6
13.5
13.4
13.3
13.2
13.1
Vcc= 4.75V
Vcc= 5.0V
Vcc= 5.25V
+25 C
+85 C
-40 C
13
12.9
12.8
13
12.9
12.8
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Output Power
vs.Tuning Voltage, Vcc= +5V
Sensitivity vs.Tuning Voltage, Vcc= +5V
300
0
-1
-2
-3
+25 C
+85 C
250
-4
-40 C
200
-5
-6
-7
-8
-9
15
150
100
50
-10
-11
+25 C
+85 C
-40 C
-12
-13
-14
0
-15
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
SSB Phase Noise vs.Tuning Voltage
Phase Noise @ Vtune= 5V
-60
0
-10
-20
-30
-40
-50
-60
10kHz offset
+25 C
+85 C
-40 C
-70
100kHz offset
-80
-90
-70
-80
-90
-100
-110
-120
-130
-100
-110
-120
-140
-150
1
2
3
4
5
6
7
8
9
10
103
104
105
106
107
TUNING VOLTAGE (VOLTS)
OFFSET FREQUENCY (Hz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
15 - 59
HMC401QS16G
v01.0402
MICROWAVE CORPORATION
Ku-BAND MMIC VCO with
DIVIDE-BY-8, 13.2 - 13.5 GHz
Divided Frequency
Divided Output
vs.Tuning Voltage, Vcc= +5V
Power vs.Tuning Voltage, Vcc= +5V
1.72
1.71
1.7
0
-1
+25 C
-2
-3
+85 C
-40 C
1.69
1.68
1.67
1.66
1.65
1.64
1.63
1.62
1.61
1.6
-4
-5
-6
-7
+25 C
+85 C
-40 C
-8
-9
-10
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Divided Output
SSB Phase Noise @ Vtune= 5V
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
-110
15
-120
-130
-140
-150
103
104
105
106
107
OFFSET FREQUENCY (Hz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
15 - 60
HMC401QS16G
v01.0402
MICROWAVE CORPORATION
Ku-BAND MMIC VCO with
DIVIDE-BY-8, 13.2 - 13.5 GHz
Typical Supply Current vs. Vcc
Absolute Maximum Ratings
Vcc (V)
4.75
5.0
Icc (mA)
Vcc1, Vcc2
5.5 V
260
Storage Temperature
Operating Temperature
Vtune
-65 to +150 °C
-40 to +85 °C
0 to 11V Max.
290
5.25
315
Note: VCO will operate over full voltage range shown above.
Outline Drawing
15
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC.
SILICA AND SILICON IMPREGNATED.
2. LEADFRAME MATERIAL: COPPER ALLOY
3. LEADFRAME PLATING: TIN/LEAD SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE.
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF & DC GROUND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
15 - 61
HMC401QS16G
v01.0402
MICROWAVE CORPORATION
Ku-BAND MMIC VCO with
DIVIDE-BY-8, 13.2 - 13.5 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1
RF OUT
RF output (AC coupled).
2, 3, 4, 6,
8, 9, 10, 13,
14, 16
N/C
No Connection
Control Voltage Input. Modulation port bandwidth
dependent on drive source impedance.
5
VTUNE
15
7, 15
VCC1, VCC2
Supply Voltage, 5V
11
OUT
Divided Output
12
NOUT
GND
Divided Output 180° output phase with pin 11.
Package bottom has an exposed metal paddle that
must be RF & DC grounded.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
15 - 62
HMC401QS16G
v01.0402
MICROWAVE CORPORATION
Ku-BAND MMIC VCO with
DIVIDE-BY-8, 13.2 - 13.5 GHz
Evaluation PCB
15
List of Materials
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and backside ground slug should be connected
directly to the ground plane similar to that shown. A
sufficient number of via holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion circuit board shown is available from Hittite upon
request.
Item
Description
J1 - J4
J5 - J6
C1 - C2
C3 - C6
U1
PC Mount SMA RF Connector
2 mm DC Header
10 µF Tantalum Capacitor
1,000 pF Capacitor 0402 Pkg.
HMC401QS16G VCO
PCB*
104436 Eval Board
* Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
15 - 63
HMC401QS16G
v01.0402
MICROWAVE CORPORATION
Ku-BAND MMIC VCO with
DIVIDE-BY-8, 13.2 - 13.5 GHz
Typical Application Circuit
15
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
15 - 64
HMC401QS16G
v01.0402
MICROWAVE CORPORATION
Ku-BAND MMIC VCO with
DIVIDE-BY-8, 13.2 - 13.5 GHz
Notes:
15
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
15 - 65
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明