HMC427LP3 [HITTITE]
GaAs MMIC POSITIVE CONTROL TRANSFER SWITCH, DC - 8.0 GHz; 砷化镓MMIC阳性对照转换开关, DC - 8.0 GHz的型号: | HMC427LP3 |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | GaAs MMIC POSITIVE CONTROL TRANSFER SWITCH, DC - 8.0 GHz |
文件: | 总6页 (文件大小:207K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC427LP3
v05.0604
MICROWAVE CORPORATION
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8.0 GHz
Typical Applications
The HMC427LP3 is ideal for:
• Test Instrumentation
Features
High Isolation: 40 ~ 45 dB thru 6 GHz
Low Insertion Loss: 1.2 dB@ 6 GHz
Non-Reflective Design
• Fiber Optics & Broadband Telecom
• Basestation Infrastructure
• Microwave Radio & VSAT
• Military Radios, Radar, & ECM
3 mm x 3 mm x 1 mm SMT Package
Functional Diagram
General Description
The HMC427LP3 is a low loss broadband posi-
tive control transfer switch in a leadless surface
mount package. Covering DC to 8 GHz, this
switch offers high isolation and low insertion loss.
The switch operates using a positive control volt-
age of 0/+5V and requires a fixed bias of +5V @
< 20 µA.
14
* Blocking capacitors are required at ports RF1, 2, 3,
& 4. Their value will determine the lowest transmission
frequency.
Electrical Specifications,TA = +25° C, With 0/+5V Control, 50 Ohm System
Parameter
Frequency
Min.
Typ.
Max.
Units
DC - 6.0 GHz
DC - 8.0 GHz
1.2
1.6
1.6
2.1
dB
dB
Insertion Loss
Isolation
DC - 1.0 GHz
DC - 2.0 GHz
DC - 6.0 GHz
DC - 8.0 GHz
42
37
33
27
48
42
38
32
dB
dB
dB
dB
DC - 6.0 GHz
DC - 8.0 GHz
14
12
17
15
dB
dB
Return Loss
Input Power for 1 dB Compression
1.0 - 8.0 GHz
1.0 - 8.0 GHz
DC - 8.0 GHz
23
37
26
43
dBm
dBm
Input Third Order Intercept
(Two-Tone Input Power= +7 dBm Each Tone, 1 MHz Tone Separation)
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
2
4
ns
ns
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 242
HMC427LP3
v05.0604
MICROWAVE CORPORATION
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8.0 GHz
Insertion Loss vs.Temperature
Isolation
0
0
RF4 to RF1
-10
RF2 to RF3
-1
-2
RF4 to RF2
RF1 to RF3
-20
-30
-40
-50
-60
-3
+25 C
+85 C
-40 C
-4
-5
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
FREQUENCY (GHz)
FREQUENCY (GHz)
Return Loss
0.1 and 1 dB Input Compression Point
0
30
28
26
24
22
20
18
16
14
RF1
-5
-10
-15
-20
-25
-30
RF2
RF3
RF4
1 dB Compression Point
14
0.1 dB Compression Point
12
10
0
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Third Order Intercept Point
50
45
40
35
30
25
20
+25 C
+85 C
-40 C
1
2
3
4
5
6
7
8
9
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 243
HMC427LP3
v05.0604
MICROWAVE CORPORATION
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8.0 GHz
Truth Table
Control Input
Signal Path State
RF4 to
RF2
RF1 to
RF3
RF4 to
RF1
RF2 to
RF3
A
B
Low
High
Low
On
Off
On
Off
Off
On
Off
On
High
Bias Voltage & Current
Control Voltages
Vdd Range = +5.0 Vdc 10 %
State
Bias Condition
Vdd
(Vdc)
Idd (Typ.)
(µA)
Idd (Max.)
(µA)
Low
0 to +0.2 Vdc @ 5 µA Typical
Vdd 0.2 Vdc @ 5 µA Typical
High
+5.0
5
10
14
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 244
HMC427LP3
v05.0604
MICROWAVE CORPORATION
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8.0 GHz
Absolute Maximum Ratings
Bias Voltage Range (Vdd)
Control Voltage Range (A & B)
Channel Temperature
Thermal Resistance
Storage Temperature
Operating Temperature
Maximum Input Power
Note:
+7.0 Vdc
-0.5V to Vdd +1.0 Vdc
150 °C
130 °C/W
-65 to +150 °C
-40 to +85 °C
+27 dBm
DC blocking capacitors are required at ports RF1, 2, 3,
& 4. Their value will determine the lowest transmission
frequency.
Outline Drawing
14
NOTES:
1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY
3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB
LAND PATTERN.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 245
HMC427LP3
v05.0604
MICROWAVE CORPORATION
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8.0 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
RF4, RF1, RF3,
RF2
This pin is DC coupled and matched to 50 Ohm. Blocking
capacitors are required.
1, 4, 9, 12
2, 3, 5, 8, 10, 11, 13,
14, 16
This pin should be connected to PCB RF ground to maximize
isolation.
N/C
Package bottom has exposed metal paddle that must be con-
nected to PCB RF ground.
GND
6
7
CTRLA
CTRLB
See truth table and control voltage table.
See truth table and control voltage table.
14
15
VDD
Supply Voltage +5V 10%.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 246
HMC427LP3
v05.0604
MICROWAVE CORPORATION
GaAs MMIC POSITIVE CONTROL
TRANSFER SWITCH, DC* - 8.0 GHz
Evaluation PCB
14
List of Material
The circuit board used in the final application should be
generated with proper RF circuit design techniques. Signal
lines at the RF port should have 50 ohm impedance and
the package ground leads and package bottom should be
connected directly to the ground plane similar to that shown
above. The evaluation circuit board shown above is avail-
able from Hittite Microwave Corporation upon request.
Item
Description
J1 - J4
J5 - J8
C1
PC Mount SMA RF Connector
DC Pin
1000 pF Capacitor, 0603 Pkg.
100 pF Capacitor, 0402 Pkg.
100 Ohm Resistor, 0603 Pkg.
HMC427LP3 Transfer Switch
105674 Evaluation PCB
C2 - C5
R1 - R2
U1
PCB*
* Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 247
相关型号:
©2020 ICPDF网 联系我们和版权申明