HMC533LP4E [HITTITE]
MMIC VCO w/ DIVIDE-BY-16, 23.8 - 24.8 GHz; MMIC VCO瓦特/除以16 ， 23.8 - 24.8 GHz的
| 型号： | HMC533LP4E |
| 厂家： | 
HITTITE MICROWAVE CORPORATION |
| 描述： | MMIC VCO w/ DIVIDE-BY-16, 23.8 - 24.8 GHz |
| 文件： | 总8页 (文件大小：354K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Typical Applications
Features
Low noise MMIC VCO w/Divide-by-16 for:
Pout: +12 dBm
• VSAT Radio
Phase Noise: -95 dBc/Hz @100 KHz Typ.
No External Resonator Needed
Single Supply: +5V @ 220 mA
QFN Leadless SMT Package, 16 mm2
• Point to Point/Multipoint Radio
• Test Equipment & Industrial Controls
• Military End-Use
• Automotive Radar
9
Functional Diagram
General Description
The HMC533LP4 & HMC533LP4E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC
VCOs. The HMC533LP4 & HMC533LP4E integrate
resonators, negative resistance devices, varactor
diodes and feature a divide-by-16 output. The VCO’s
phasenoiseperformanceisexcellentovertemperature,
shock, and process due to the oscillator’s monolithic
structure. Power output is +12 dBm typical from a +5V
supply voltage. Prescaler function can be disabled to
conserve current if not required. The voltage controlled
oscillator is packaged in a leadless QFN 4 x 4 mm
surface mount package.
Electrical Specifications, TA = +25° C, Vcc1, Vcc2, Vcc3 = +5V
Parameter
Min.
Typ.
Max.
Units
GHz
Frequency Range
Power Output
23.8 - 24.8
RFOUT
RFOUT/16
+9
-7
+12
-4
+15
-1
dBm
dBm
SSB Phase Noise @ 100 kHz Offset, Vtune= +5V @ RFOUT
Tune Voltage
-95
220
3
dBc/Hz
V
Vtune
Icc
2
13
260
10
Supply Current
180
mA
μA
Tune Port Leakage Current (Vtune= 13V)
Output Return Loss
dB
Harmonics/Subharmonics
1/2
3/2
26
37
dBc
dBc
Pulling (into a 2.0:1 VSWR)
Pushing @ Vtune= 5V
Frequency Drift Rate
13
80
MHz pp
MHz/V
MHz/°C
2.3
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 148
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Frequency vs. Tuning Voltage, T= 25°C
Frequency vs. Tuning Voltage, Vcc= +5V
26
25.6
25.2
24.8
24.4
24
26
25.6
25.2
24.8
24.4
24
23.6
23.6
Vcc=4.75V
+25 C
23.2
22.8
22.4
22
23.2
22.8
22.4
22
Vcc=5.0V
+85 C
-40 C
Vcc=5.25V
9
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
Output Power
vs. Tuning Voltage, Vcc= +5V
Sensitivity vs. Tuning Voltage, Vcc= +5V
600
15
14
13
12
11
10
9
500
+25 C
+85 C
-40 C
400
300
200
100
0
8
7
+25 C
+85 C
-40 C
6
5
4
3
2
1
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 149
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
SSB Phase Noise vs. Tuning Voltage
SSB Phase Noise @ Vtune= +5V
-60
-65
-70
-75
0
-20
+25 C
+85 C
-40 C
-40
-60
-80
-80
10kHz offset
100kHz offset
-85
-90
-95
-100
-120
-140
-160
-100
-105
-110
9
1
2
3
4
5
6
7
8
9
10 11 12 13
103
104
105
106
107
TUNING VOLTAGE (VOLTS)
OFFSET FREQUENCY (Hz)
Divide-by-16 Frequency
Divide-by-16 Output
vs. Tuning Voltage, Vcc= +5V
Power vs. Tuning Voltage, Vcc= +5V
1.625
0
-1
-2
-3
-4
-5
-6
1.6
1.575
1.55
1.525
1.5
1.475
+25 C
1.45
-7
-8
+85 C
+25 C
+85 C
-40 C
-40 C
1.425
-9
1.4
1.375
-10
0
1
2
3
4
5
6
7
8
9
10 11 12 13
0
1
2
3
4
5
6
7
8
9
10 11 12 13
TUNING VOLTAGE (VOLTS)
TUNING VOLTAGE (VOLTS)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 150
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Absolute Maximum Ratings
Typical Supply Current vs. Vcc
Vcc1, Vcc2
5.5 V
Vcc (V)
Icc (mA)
Vtune
0 to 15V Max.
135 °C
4.75
200
Junction Temperature
5.0
220
Continuous Pdiss (T=85 °C)
(derate 28 mW/C above 85 °C
5.25
240
1.4 W
Note: VCO will operate over full voltage range shown above.
Thermal Resistance
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
36 °C/W
-65 to +150 °C
-40 to +85 °C
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
9
Outline Drawing
NOTES:
11. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H533
XXXX
HMC533LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
H533
XXXX
MSL1 [2]
HMC533LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 151
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 15, 17,
21, 23
Package bottom has an exposed metal paddle that
must also be connected to RF/DC ground.
GND
2
RFOUT/16
Divided-by-16 Output
9
Suppy voltage for prescaler.
If prescaler is not required, these pins may be
left open to conserve 100 mA of current
3, 4
VCC2, VCC3
5-14, 18,
19, 24
No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
N/C
16
RFOUT
RF output (AC coupled).
20
22
VCC1
Supply Voltage, +5V
Control Voltage Input. Modulation port bandwidth
dependent on drive source impedance.
VTUNE
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 152
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Evaluation PCB
9
List of Materials for Evaluation PCB 106651 [1]
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and backside ground slug
should be connected directly to the ground plane
similar to that shown. A sufficient number of via
holes should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
Item
Description
J1 - J2
J3
PCB Mount SMA RF Connector
2.92 mm PCB mount k-connector
2 mm DC Header
J4 - J5
C1 - C2
C3
4.7 μF Tantalum Capacitor
100 pF Capacitor, 0402 Pkg.
1,000 pF Capacitor, 0603 Pkg.
HMC533LP4 / HMC533LP4E VCO
106546 Eval Board
C4 -C5
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 153
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Typical Application Circuit
9
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 154
HMC533LP4 / 533LP4E
v00.0405
MMIC VCO w/ DIVIDE-BY-16,
23.8 - 24.8 GHz
Notes:
9
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 155
相关型号：
HMC533LP4ETR
Voltage Controlled Oscillator, 23800MHz Min, 24800MHz Max, ROHS COMPLIANT, PLASTIC, LEADLESS, QFN-24
HITTITE
HMC533LP4TR
Voltage Controlled Oscillator, 23800MHz Min, 24800MHz Max, PLASTIC, LEADLESS, QFN-24
HITTITE
HMC534LP5ETR
Voltage Controlled Oscillator, 10600MHz Min, 11800MHz Max, ROHS COMPLIANT, PLASTIC, LEADLESS, QFN-32
HITTITE
HMC534LP5TR
Voltage Controlled Oscillator, 10600MHz Min, 11800MHz Max, PLASTIC, LEADLESS, QFN-32
HITTITE
©2020 ICPDF网 联系我们和版权申明