HMC536LP2 [HITTITE]
GaAs MMIC POSITIVE CONTROL T/R SWITCH, DC - 6.0 GHz; 砷化镓MMIC阳性对照T / R开关, DC - 6.0 GHz的型号: | HMC536LP2 |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | GaAs MMIC POSITIVE CONTROL T/R SWITCH, DC - 6.0 GHz |
文件: | 总6页 (文件大小:213K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC536LP2 / 536LP2E
v00.0606
GaAs MMIC POSITIVE CONTROL
T/R SWITCH, DC - 6.0 GHz
Typical Applications
Features
Input P0.1dB: +33 dBm @ +5V
Insertion Loss: 0.6 dB
The HMC536LP2 / HMC536LP2E is ideal for:
• Cellular/PCS/3G Infrastructure
• WiMAX, WiBro & Fixed Wireless
• CATV/CMTS
Positive Control: +3V or +5V
Isolation: 27 dB
2x2 mm Leadless DFN SMT Package, 4 mm2
• Test Instrumentation
8
Functional Diagram
General Description
The HMC536LP2
& HMC536LP2E are DC to
6 GHz GaAs MMIC T/R switches in leadless 2x2 mm
DFN LP2 surface mount packages with an exposed
ground paddle. The switch is ideal for cellular, WiMAX,
& WiBro access point and subscriber applications
featuring low 0.6 dB insertion loss and high +54 dBm
input IP3. Power handling is excellent up through 6 GHz
with the switch offering a P0.1dB compression point of
+29 dBm at +3V and +33 dBm at +5V control. On-
chip circuitry allows positive voltage control of 0/+3V
or 0/+5V at very low DC currents. The HMC536LP2 &
HMC536LP2E occupy only 4 mm2 and are ideal for
applications where small size is required.
Electrical Specifications, TA = +25° C, Vctl = 0/+3 Vdc to +5 Vdc, 50 Ohm System
Parameter
Frequency
Min.
Typ.
Max.
Units
DC - 3.0 GHz
DC - 4.5 GHz
DC - 6.0 GHz
0.6
0.7
1.0
0.9
1.0
1.3
dB
dB
dB
Insertion Loss
DC - 4.0 GHz
4.0 - 5.0 GHz
5.0 - 6.0 GHz
23
26
24
27
30
29
dB
dB
dB
Isolation (RFC to RF1/RF2)
DC - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 6.0 GHz
20
20
12
dB
dB
dB
Return Loss
Input Power for 0.1 dB Compression
(Vctl = 3V)
(Vctl = 5V)
0.5 - 6.0 GHz
0.5 - 6.0 GHz
27
31
29
33
dBm
dBm
0.5 - 1.0 GHz
1.0 - 3.0 GHz
3.0 - 6.0 GHz
54
52
49
dBm
dBm
dBm
Input Third Order Intercept
(Two-Tone Input Power = +7 dBm Each Tone)
(Vctl = 3V, 5V)
Switching Speed
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
DC - 6.0 GHz
33
70
ns
ns
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 270
HMC536LP2 / 536LP2E
v00.0606
GaAs MMIC POSITIVE CONTROL
T/R SWITCH, DC - 6.0 GHz
Insertion Loss
Return Loss
0
0
-5
RFC
RF1
RF2
-0.5
-1
-10
-15
-20
-25
-30
-35
8
+25 C
+85 C
-40 C
-1.5
-2
0
1
2
3
4
5
6
0
1
2
3
4
5
6
6
6
FREQUENCY (GHz)
FREQUENCY (GHz)
Isolation Between
Ports RFC and RF1 / RF2
Isolation Between Ports RF1 and RF2
0
0
-5
-10
-15
-20
-25
-30
-35
-40
-5
-10
RF1
RF2
-15
-20
-25
-30
-35
-40
RF1-RF2
0
1
2
3
4
5
6
0
1
2
3
4
5
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Third Order
Intercept Point, Vctl = 3v
Input 0.1 dB Compression Point
64
62
60
58
56
54
52
50
48
46
44
42
40
40
38
5V
3V
36
34
32
30
28
26
+25C
+85C
-40C
0
1
2
3
4
5
0
1
2
3
4
5
6
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 271
HMC536LP2 / 536LP2E
v00.0606
GaAs MMIC POSITIVE CONTROL
T/R SWITCH, DC - 6.0 GHz
Control Voltages
Absolute Maximum Ratings
*Control Input Tolerances are 0.2 Vdc
Control Voltage Range
-0.5 to +7.5 Vdc
State
Low
Bias Condition*
0 Vdc @ 25 μA Typical
Hot Switch Power Level
(Vctl = +3V)
+29 dBm
150 °C
High
+3 Vdc to +5 Vdc @ 25 μA Typical
Channel Temperature
Continuous Pdiss (T = 85 °C)
(derate 13.3 mW/°C above 85 °C)
0.86 W
Truth Table
Thermal Resistance
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
75 °C/W
Control Input
Signal Path State
RFC to:
RF1
8
-65 to +150 °C
-40 to +85 °C
Class 1A
A
B
Low
High
High
Low
RF2
DC blocks are required at ports RFC, RF1, RF2.
Choose value for lowest frequency of operation.
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
536
XXX
HMC536LP2
Low Stress Injection Molded Plastic
Sn/Pb Solder
536
XXX
MSL1 [2]
HMC536LP2E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 3-Digit lot number XXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 272
HMC536LP2 / 536LP2E
v00.0606
GaAs MMIC POSITIVE CONTROL
T/R SWITCH, DC - 6.0 GHz
Pin Descriptions
Pin Number
Function
A
Description
Interface Schematic
1
3
See truth and control voltage tables.
See truth and control voltage tables.
B
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
8
2, 4, 6
5
RFC, RF1, RF2
GND
Package bottom has exposed metal paddle that
must also be connected to RF/DC ground.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 273
HMC536LP2 / 536LP2E
v00.0606
GaAs MMIC POSITIVE CONTROL
T/R SWITCH, DC - 6.0 GHz
Evaluation PCB
8
List of Materials for Evaluation PCB 115195 [1]
The circuit board used in the final application should
be generated with proper RF circuit design tech-
niques. Signal lines at the RF port should have 50
ohm impedance and the package ground leads and
exposed paddle should be connected directly to the
ground plane similar to that shown above. The eval-
uation circuit board shown above is available from
Hittite Microwave Corporation upon request.
Item
Description
J1 - J3
J4 - J6
C1 - C3
R1 - R2
PCB Mount SMA RF Connector
DC Pin
100 pF Capacitor, 0402 Pkg.
1K Ohm Resistor, 0402 Pkg.
HMC536LP2 / HMC536LP2E
SPDT Switch
U1
[2]
PCB
115194 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 274
HMC536LP2 / 536LP2E
v00.0606
GaAs MMIC POSITIVE CONTROL
T/R SWITCH, DC - 6.0 GHz
Notes:
8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
8 - 275
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明