HMC627LP5E [HITTITE]
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC - 1 GHz; 0.5分贝LSB的GaAs MMIC 6位数字可变增益放大器, DC - 1 GHz的型号: | HMC627LP5E |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER, DC - 1 GHz |
文件: | 总10页 (文件大小:317K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC627LP5 / 627LP5E
v01.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Typical Applications
The HMC627LP5(E) is ideal for:
• Cellular/3G Infrastructure
• WiBro / WiMAX / 4G
Features
-11.5 to 20 dB Gain Control in 0.5 dB Steps
High Output IP3: +36 dBm
TTL/CMOS Compatible Serial or Parallel Control
0.25 dB Typical Gain Step Error
Single +5V Supply
• Microwave Radio & VSAT
• Test Equipment and Sensors
• IF & RF Applications
32 Lead 5x5mm SMT Package: 25mm2
Functional Diagram
General Description
The HMC627LP5(E) is a digitally controlled variable
gain amplifier which operates from DC to 1 GHz,
and can be programmed to provide anywhere from
11.5 dB attenuation, to 20 dB of gain, in 0.5 dB steps.
The HMC627LP5(E) delivers noise figure of 4.3 dB
in its maximum gain state, with output IP3 of up to
+36 dBm in any state. The dual mode gain control
interface accepts either three wire serial input or 6
bit parallel word. The HMC627LP5(E) also features a
user selectable power up state and a serial output for
cascading other Hittite serially controlled components.
The HMC627LP5(E) is housed in a RoHS compliant
5x5 mm QFN leadless package, and requires no
external matching components.
14
Electrical Specifications, TA = +25° C, Vdd = +5V, Vs= +5V
Parameter
Frequency
Min.
Typ.
Max.
Units
DC - 0.5 GHz
0.5 - 1.0 GHZ
18
15
20
17.5
dB
dB
Gain (Maximum Gain State)
Gain Control Range
Input Return Loss
Output Return Loss
31.5
17
dB
DC - 1.0 GHz
DC - 1.0 GHz
12
dB
Gain Accuracy: (Referenced to Maximum Gain State)
All Gain States
DC - 0.8 GHz
0.8 - 1.0 GHZ
(0.10 + 5% of Gain Setting) Max.
(0.30 + 3% of Gain Setting) Max.
dB
Output Power for 1 dB Compression
DC - 1.0 GHz
DC - 1.0 GHz
16
20
36
dBm
Output Third Order Intercept Point
(Two-Tone Input Power= 0 dBm Each Tone)
dBm
Noise Figure
DC - 1.0 GHz
DC - 1.0 GHz
4.3
90
dB
Supply Current (Idd)
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 20
HMC627LP5 / 627LP5E
v01.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Normalized Attenuation
(Only Major States are Shown)
Maximum Gain vs. Frequency[1]
25
20
15
10
5
0
-5
[1]
-10
-15
-20
-25
-30
-35
[2]
0
-5
-10
-15
-20
-25
+25 C
-40 C
+85 C
0
0.5
1
1.5
2
2.5
3
3
3
3.5
3.5
3.5
4
4
4
0
0.5
1
1.5
2
2.5
3
3
3
3.5
3.5
3.5
4
4
4
FREQUENCY (GHz)
FREQUENCY (GHz)
14
Input Return Loss[1]
(Only Major States are Shown)
Output Return Loss[1]
(Only Major States are Shown)
0
-5
0
-5
-10
-15
-20
-25
-30
-35
-40
-10
-15
-20
-25
-30
-35
-40
0
0.5
1
1.5
2
2.5
0
0.5
1
1.5
2
2.5
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss[2]
(Only Major States are Shown)
Output Return Loss[2]
(Only Major States are Shown)
0
-5
0
-5
-10
-15
-20
-25
-30
-35
-40
-10
-15
-20
-25
-30
-35
-40
0
0.5
1
1.5
2
2.5
0
0.5
1
1.5
2
2.5
FREQUENCY (GHz)
FREQUENCY (GHz)
[1] Tested with broadband bias tee on RF ports and C1 = 10,000pF
[2] C1, C6 and C8 = 100pF, L1 = 270nF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 21
HMC627LP5 / 627LP5E
v01.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Bit Error vs. Frequency[2]
(Only Major States are Shown)
Bit Error vs. Attenuation State[2]
2
1.5
1
1
0.8
0.6
0.4
0.2
0
0.5
0
-0.2
-0.4
-0.6
-0.8
-1
-0.5
-1
-1.5
-2
0
0.5
1
1.5
2
2.5
3
3.5
4
0
4
8
12
16
20
24
28
32
FREQUENCY (GHz)
ATTENUATION STATE (dB)
14
Normal Relative Phase vs. Frequency[2]
(Only Major States are Shown)
Step Error vs. Frequency[2]
(Only Major States are Shown)
80
1
0.8
0.6
0.4
0.2
0
31.5 dB
60
16 dB
40
8 dB
20
0
-0.2
-0.4
-0.6
-0.8
-1
0.5 - 4 dB
-20
-40
0
0.5
1
1.5
2
2.5
3
3.5
4
0
0.5
1
1.5
2
2.5
3
3.5
4
FREQUENCY (GHz)
FREQUENCY (GHz)
[1] Tested with broadband bias tee on RF ports and C1 = 10,000pF
[2] C1, C6 and C8 = 100pF, L1 = 270nF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 22
HMC627LP5 / 627LP5E
v01.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Serial Mode
The serial mode is enabled then P/S is set to high. Data is entered LSB first and after the 6th shift clock cycle the LE
(Latch Enable) is pulsed High and then Low. See timing diagram below for reference.
Timing Diagram
14
Timing
Timing Diagram (Latched Parallel Mode)
Vdd = +5V
(Typ.)
Parameter
Symbol
Units
ns
Serial Input Setup Time
ts
th
20
20
Hold Time from Serial
Input to Shift Clock
ns
Setup Time from Shift
Clock to Latch Enable
tlsup
40
ns
Propagation Delay
tpd
10
10
ns
ns
Setup Time for New Data
tsnd
Parallel Mode (Direct Parallel Mode & Latched Parallel Mode)
Direct Parallel Mode - The attenuation state is changed by the Control Voltage Inputs directly. The LE (Latch Enable)
must be at a logic high to control the attenuator in this manner.
Latched Parallel Mode - The attenuation state is selected using the Control Voltage Inputs and set while the LE is in
the Low state. The attenuator will not change state while LE is Low. Once all Control Voltage Inputs are at the desired
states the LE is pulsed. See timing diagram below for reference.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 23
HMC627LP5 / 627LP5E
v01.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Power-Up States
Parallel PUP Truth Table
Using the Parallel PUP truth table the attenuator can
be turned on at a specific attenuation state. By using
the PUP1 and PUP2 line four different attenuation
states can be selected. It can also be used in the
Direct Parallel Mode using the Control Voltage Inputs
to select attenuation values.
Gain Relative to
Maximum Gain
P/S
LE
PUP2
PUP1
0
0
0
0
0
0
0
0
0
1
0
1
0
1
X
0
0
1
1
X
-31.5
-24
-16
-8
-0.5 to -31.5 dB
Note: Power-Up with LE= 1 provides normal parallel operation
with D0 - D5, and PUP1 and PUP2 are not active.
14
Absolute Maximum Ratings
Truth Table
RF Input Power [1]
11.5 dBm (T = +85 °C)
Control Voltage Input
Gain
Relative to
Maximum
Gain
Digital Inputs (Reset, Shift Clock,
Latch Enable & Serial Input)
-1.5V to (Vdd +1.5V) Vdc
D5
D4
D3
D2
D1
D0
Bias Voltage (Vdd)
5.6 Vdc
5.5 Vdc
150 °C
High
High
High
High
High
High
Low
High
High
High
High
High
Low
High
High
High
High
Low
High
High
High
Low
High
High
Low
High
Low
0 dB
-0.5 dB
-1 dB
Collector Bias Voltage (Vcc)
Channel Temperature
High
High
High
High
High
Low
Continuous Pdiss (T = 85 °C)
(derate 9 mW/°C above 85 °C) [1]
0.593 W
High
High
High
High
Low
-2 dB
High
High
High
Low
-4 dB
Thermal Resistance
Storage Temperature
Operating Temperature
[1] At max gain settling
110 °C/W
High
High
Low
-8 dB
-65 to +150 °C
-40 to +85 °C
High
Low
-16 dB
-31.5 dB
Low
Any combination of the above states will provide a reduction in
gain approximately equal to the sum of the bits selected.
Bias Voltage
TTL/CMOS Control Voltage
Vdd (V)
Idd (Typ.) (mA)
+5.0
2
State
Vdd= +3V or +5V
Vs (V)
+5.0
Is (mA)
88
Low
0 to 0.8V
High
2.0V to Vdd
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 24
HMC627LP5 / 627LP5E
v01.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Outline Drawing
14
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H627
XXXX
HMC627LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
H627
XXXX
MSL1 [2]
HMC627LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 25
HMC627LP5 / 627LP5E
v01.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Pin Descriptions
Pin Number
Function
AMPIN
Description
Interface Schematic
This pin is DC coupled.
An off chip DC blocking capacitor is required.
1
RF output and DC bias (Vcc) for the output stage of the
amplifier.
29
AMPOUT
GND
2, 3, 11, 13,
28, 30 - 32
These pins and package bottom
must be connected to RF/DC ground.
14
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required. Select value based
on lowest frequency of operation.
ATTIN,
ATTOUT
4, 12
External capacitors to ground is required. Select value for
lowest frequency of operation. Place capacitor as close to
pins as possible.
5 - 10
ACG1 - ACG6
14
SERIN
15, 16
PUP2, PUP1
D5, D4, D3,
D2, D1, D0
18 - 23
See truth table, control voltage
table and timing diagram.
24
25
P/S
CLK
27
17
LE
Vdd
Supply Voltage
26
SEROUT
Serial input data delayed by 6 clock cycles.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 26
HMC627LP5 / 627LP5E
v01.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Application Circuit
14
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 27
HMC627LP5 / 627LP5E
v01.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Evaluation PCB
14
List of Materials for Evaluation PCB 118329 [1]
Item
Description
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
J1 - J2
J3
PCB Mount SMA Connector
4 Pin DC Connector
J4, J5
C1 - C9
C11 - C12
C14
14 Pin DC Connector
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0402 Pkg.
2.2 μF Capacitor, CASEA Pkg.
1.8 Ohm Resistor, 1206 Pkg.
270 nH Inductor, 0603 Pkg.
HMC627LP5(E) Variable Gain Amplifier
116958 Evaluation PCB
R1
L1
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 28
HMC627LP5 / 627LP5E
v01.0907
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, DC - 1 GHz
Notes:
14
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
14 - 29
相关型号:
©2020 ICPDF网 联系我们和版权申明