HMC723LC3CTR [HITTITE]
Bus Driver, 723 Series, 1-Func, 2-Bit, Complementary Output, CQCC16, 3 X 3 MM, ROHS COMPLIANT, CERAMIC, SMT-16;
| 型号： | HMC723LC3CTR |
| 厂家： | 
HITTITE MICROWAVE CORPORATION |
| 描述： | Bus Driver, 723 Series, 1-Func, 2-Bit, Complementary Output, CQCC16, 3 X 3 MM, ROHS COMPLIANT, CERAMIC, SMT-16 总线驱动器 总线收发器 触发器 逻辑集成电路 输出元件 |
| 文件： | 总8页 (文件大小：598K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC723LC3C
v02.12019 3 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Typical Applications
Features
The HMC723LC3C is ideal for:
• RF ATE Applications
Supports High Data Rates: up to 13 Gbps
Differential & Singe-Ended Operation
Fast Rise and Fall Times: 19 / 17 ps
• Broadband Test & Measurement
• Serial Data Transmission up to 13 Gbps
• Digital Logic Systems up to 13 GHz
3
Low Power Consumption: 260 mW typ.
Programmable Differential
Output Voltage Swing: 700 - 1300 mV
Propagation Delay: 105 ps
Single Supply: -3.3V
16 Lead Ceramic 3x3mm SMT Package: 9mm2
Functional Diagram
General Description
The HMC723LC3C is a D-type Flip Flop designed to
support data transmission rates of up to 13 Gbps, and
clock frequencies as high as 13 GHz. During normal
operation, data is transferred to the outputs on the
positive edge of the clock. Reversing the clock inputs
allows for negative-edge triggered applications. The
HMC723LC3C also features an output level control pin,
VR, which allows for loss compensation or for signal
level optimization.
AllinputsignalstotheHMC723LC3Careterminatedwith
50 Ohms to ground on-chip, and maybe either AC or DC
coupled. The differential outputs of the HMC723LC3C
may be either AC or DC coupled. Outputs can be
connected directly to a 50 Ohm to ground terminated
system, while DC blocking capacitors may be used if
the terminating system is 50 Ohms to a non-ground
DC voltage. The HMC723LC3C operates from a single
-3.3V DC supply and is available in a ceramic RoHS
compliant 3x3 mm SMT package.
Electrical Specifications, TA = +25°C, Vee = -3.3V
Parameter
Conditions
Min.
-3.6
Typ.
-3.3
80
Max
-3.0
Units
V
Power Supply Voltage
Power Supply Current
Maximum Data Rate
Maximum Clock Rate
Input High Voltage
Input Low Voltage
Input Return Loss
mA
13
Gbps
GHz
V
13
-0.5
-1.0
0.5
0.0
V
Frequency <13 GHz
Single-Ended, peak-to-peak
Differential, peak-to-peak
10
550
1100
-10
dB
mVp-p
mVp-p
mV
Output Amplitude
Output High Voltage
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 1
HMC723LC3C
v02.1209
13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Electrical Specifications, (continued)
Parameter
Conditions
Min.
Typ.
-570
19 / 17
10
Max
0.2
Units
mV
Output Low Voltage
Output Rise / Fall Time
Output Return Loss
Differential, 20% - 80%
Frequency <13 GHz
rms
ps
dB
3
Random Jitter Jr
ps rms
ps, p-p
ps
Deterministic Jitter, Jd
Propagation Delay Clock to Data, td
Clock Phase Margin
peak-to-peak, 215-1 PRBS input [1]
2
105
320
6
13 GHz
deg
ps
Set Up & Hold Time, tSH
[1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215-1 PRBS input, and a single-ended output
Output Differential
vs. Supply Voltage [1] [3]
DC Current vs. Supply Voltage [1] [2]
95
1600
90
1500
1400
1300
1200
1100
1000
+25C
+25C
+85C
-40C
+85C
-40C
85
80
75
70
65
60
-3.7
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
-2.9
-3.7
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
-2.9
SUPPLY VOLTAGE (V)
SUPPLY VOLTAGE (V)
Output Differential vs. Frequency [1]
Output Differential vs. VR [3]
1400
1500
1300
1200
1100
1000
900
1300
1100
900
+25C
+85C
-40C
700
800
500
2
4
6
8
10
12
14
16
-1.2
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
VR (V)
FREQUENCY (GHz)
[1] VR = 0.0V
[2] Frequency = 13 GHz
[3] Frequency = 10 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 2
HMC723LC3C
v02.1209
13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Rise / Fall Time vs. Supply Voltage [2]
Rise / Fall Time vs. VR [2]
25
23
21
19
17
15
25
23
21
19
17
15
tr
tf
tr
tf
3
-3.7
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
-2.9
-1.2
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
VR (V)
SUPPLY VOLTAGE (V)
Input Return Loss vs. Frequency
Output Return Loss vs. Frequency
-15
-10
-20
-25
-30
-35
-40
-45
-15
-20
-25
-30
-35
0
2
4
6
8
10
12
14
0
2
4
6
8
10
12
14
FREQUENCY (GHz)
FREQUENCY (GHz)
[1] VR = 0.0V
[2] Frequency = 13 GHz
[3] Frequency = 10 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 3
HMC723LC3C
v02.1209
13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Eye Diagram
[1] Test Conditions:
Pattern generated with an Agilent N4903A Serial BERT.
Eye Diagram presented on a Tektronix CSA 8000.
Device input = 13 Gbps PN code, Vin = 300mVp-p differential.
Both output channels shown.
3
Timing Diagram
I
t
t
=
c
f
clock
= Setup and Hold Time
SH
t
- t
SH
c
CPM = Clock Phase Margin = 360°
t
c
Truth Table
Input
Outputs
D
L
C
Q
L
L -> H
L -> H
H
H
Notes:
D = DP - DN
C = CP - CN
Q = QP - QN
H - Positive voltage level
L - Negative voltage level
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 4
HMC723LC3C
v02.1209
13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Absolute Maximum Ratings
Power Supply Voltage (Vee)
-3.75V to +0.5V
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Input Signals
-2V to +0.5V
Output Signals
-1.5V to +1V
Storage Temperature
Operating Temperature
-65°C to +150°C
-40°C to +85°C
3
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. GROUND PADDLE MUST BE SOLDERED TO Vee.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
3 - 5
Application Support: Phone: 978-250-3343 or apps@hittite.com
HMC723LC3C
v02.1209
13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 4, 5, 8, 9, 12
GND
Signal Grounds
3
2, 3
DN, DP
Data Inputs
Clock Inputs
6, 7
CP, CN
10, 11
QN, QP
Data Outputs
13, 16
14
GND
Supply Ground
Output level control. Output level may be adjusted by
either applying a voltage to VR per “Output Differential
vs. VR” plot, or by tying VR to GND with a resistor per the
following equation: V0(R) = 1.2 / (2.1 + R), R in kΩ
VR
15, Package
Base
Vee
Negative Supply
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 6
HMC723LC3C
v02.1209
13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Evaluation PCB
3
Item
J1
Description
DN
DP
J2
J3
J4
J5
J6
J7
J8
J9
CP
CN
QN
QP
Vee
VR
GND
List of Materials for Evaluation PCB 118777 [1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package gro-
und leads should be connected directly to the
ground plane similar to that shown. The exposed
package base should be connected to Vee. A suffi-
cient number of via holes should be used to connect
the top and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon
request.
Item
Description
J1 - J6
J7 - J9
C1, C2
C3, C4
R1
PCB Mount SMA RF Connectors
DC Pin
100 pF Capacitor, 0402 Pkg.
4.7 µF Capacitor, Tantalum
10 Ohm Resistor, 0603 Pkg.
HMC723LC3C
High Speed Logic, D-Type Flip-Flop
U1
[2]
PCB
118775 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 7
HMC723LC3C
v02.1209
13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP
w/ PROGRAMMABLE OUTPUT VOLTAGE
Application Circuit
3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 8
相关型号：
HMC725LC3CTR
XOR/XNOR Gate, 725 Series, 1-Func, 2-Input, CQCC16, 3 X 3 MM, ROHS COMPLIANT, CERAMIC, SMT-16
HITTITE
©2020 ICPDF网 联系我们和版权申明