HMC745LC3C [HITTITE]
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY; 13 Gbps的，快速上升时间XOR / XNOR门W /可编程输出电压与正电源
| 型号： | HMC745LC3C |
| 厂家： | 
HITTITE MICROWAVE CORPORATION |
| 描述： | 13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY |
| 文件： | 总8页 (文件大小：275K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Typical Applications
Features
The HMC745LC3C is ideal for:
• RF ATE Applications
Inputs Terminated Internally in 50 Ohms
Differential & Singe-Ended Operation
Fast Rise and Fall Times: 21 / 19 ps
Low Power Consumption: 240 mW typ.
• Broadband Test & Measurement
• Serial Data Transmission up to 13 Gbps
• Digital Logic Systems up to 13 GHz
7
Programmable Differential
Output Voltage Swing: 600 - 1200 mV
Propagation Delay: 95 ps
Single Supply: +3.3V
16 Lead Ceramic 3x3mm SMT Package: 9mm2
Functional Diagram
General Description
The HMC745LC3C is a XOR/XNOR gate function
designed to support data transmission rates of up to 13
Gbps, and clock frequencies as high as 13 GHz. The
HMC745LC3C also features an output level control pin,
VR, which allows for loss compensation or for signal
level optimization.
All input and output signals to the HMC745LC3C are
terminated with 50 Ohms to Vcc on-chip, and may
be either AC or DC coupled. Inputs or outputs can
be connected directly to a 50 Ohm to Vcc terminated
system, while DC blocking capacitors may be used
if the terminating system is 50 Ohms to ground. The
HMC745LC3C operates from a single +3.3V DC supply,
and is available in a ceramic RoHS compliant 3x3 mm
SMT package.
Electrical Specifications, TA = +25°C, Vcc = +3.3V
Parameter
Conditions
Min.
3.0
Typ.
3.3
72
Max
3.6
Units
V
Power Supply Voltage
Power Supply Current
Maximum Data Rate
Maximum Clock Rate
Input High Voltage
Input Low Voltage
Input Return Loss
mA
Gbps
GHz
V
13
13
2.8
2.1
3.8
3.3
V
Frequency <13 GHz
Single-Ended, peak-to-peak
Differential, peak-to-peak
10
550
dB
mVpp
mVpp
V
Output Amplitude
1100
3.25
2
Output High Voltage
Output Low Voltage
Output Rise / Fall Time
V
Differential, 20% - 80%
21 / 19
ps
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 146
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Electrical Specifications, (continued)
Parameter
Conditions
Min.
Typ.
10
Max
0.2
Units
dB
Output Return Loss
Frequency <13 GHz
Small Signal Gain
Random Jitter Jr
27
dB
rms
ps rms
ps, pp
ps
7
Deterministic Jitter, Jd
peak-to-peak, 215-1 PRBS input [1]
2
Propagation Delay, td
95
[1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215-1 PRBS input, and a single-ended output
Output Differential
vs. Supply Voltage [1] [2]
DC Current vs. Supply Voltage [1] [2]
90
1200
1175
1150
1125
1100
1075
1050
1025
1000
85
+25C
+85C
-40C
80
75
70
65
60
55
+25C
+85C
-40C
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
SUPPLY VOLTAGE (V)
SUPPLY VOLTAGE (V)
Rise / Fall Time vs. Supply Voltage [2]
Output Differential vs. Frequency [1]
25
1400
tr
tf
1200
1000
800
23
21
19
17
15
600
400
2
4
6
8
10
12
14
16
18
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
SUPPLY VOLTAGE (V)
FREQUENCY (GHz)
[1] VR = +3.3V
[2] Frequency = 13 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 147
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Output Differential vs. VR [2]
Rise / Fall Time vs. VR [2]
1400
1200
1000
800
25
tr
tf
23
21
19
17
15
7
+25C
+85C
-40C
600
400
2.1
2.3
2.5
2.7
2.9
3.1
3.3
3.5
3.7
2.1
2.3
2.5
2.7
2.9
3.1
3.3
3.5
3.7
VR (V)
VR (V)
Output Return Loss vs. Frequency
Input Return Loss vs. Frequency
0
0
-5
-10
-15
-20
-25
-30
-35
-5
-10
-15
-20
-25
-30
0
2
4
6
8
10
12
14
0
2
4
6
8
10
12
14
FREQUENCY (GHz)
FREQUENCY (GHz)
[1] VR = +3.3V
[2] Frequency = 13 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 148
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Eye Diagram
[1] Test Conditions:
Waveform generated with an Agilent N4903A J-Bert. Rate = 13
Gbps.
Eye diagram data presented on a Tektronix CSA 8000. Device is
AC coupled to scope.
7
Timing Diagram
Truth Table
Input
Outputs
A
L
B
L
D
L
L
H
L
H
H
L
H
H
H
Notes:
A = AP - AN
B = BP - BN
D = DP - DN
H - Negative voltage level
L - Positive voltage level
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 149
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Absolute Maximum Ratings
Power Supply Voltage (Vee)
-0.5V to +3.7V
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Input Signals
Vcc - 2V to Vcc + 0.5V
+1V to +3.7V
Output Signals
Storage Temperature
Operating Temperature
-65°C to +150°C
-40°C to +85°C
7
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO GND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 150
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 4, 5, 8, 9, 12
GND
Signal Grounds
7
2, 3
AN, AP
BP, BN
Clock / Data Input A
6, 7
Clock / Data Input B
10, 11
13, 16
DN, DP
Clock / Data Output
Vcc
Positive Supply
Supply Ground
14,
GND
Package Base
Output level control. Output level may be
adjusted by applying a voltage to VR per
“Output Differential vs. VR” plot.
15
VR
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 151
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Evaluation PCB
7
Item
J1
Description
AN
J2
J3
J4
J5
J6
J7
J8
J9
AP
BP
BN
DN
DP
GND
VR
Vcc
List of Materials for Evaluation PCB 122517 [1]
The circuit board used in the final application sho-
uld use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads should be connected directly to the
ground plane similar to that shown. The exposed
package base should be connected to GND. A suffi-
cient number of via holes should be used to connect
the top and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon
request.
Item
Description
J1 - J6
J7 - J9
JP1
PCB Mount SMA RF Connectors
DC Pin
Shorting Jumper
C1, C2
C3 - C5
R2
4.7 μF Capacitor, Tantalum
100 pF Capacitor, 0402 Pkg.
10 Ohm Resistor, 0603 Pkg.
HMC745LC3C
High Speed Logic, XOR / XNOR
U1
[2]
PCB
122515 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 152
HMC745LC3C
v01.1208
13 Gbps, FAST RISE TIME XOR / XNOR GATE
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Application Circuit
7
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 153
相关型号：
HMC745LC3C_11
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
HITTITE
HMC745LC3TR
13 Gbps, Fast Rise Time XOR/XNOR Gate with Programmable Output Voltage and Positive Supply
ADI
HMC745LC3TR-R5
13 Gbps, Fast Rise Time XOR/XNOR Gate with Programmable Output Voltage and Positive Supply
ADI
HMC745LC3_11
13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
HITTITE
HMC746LC3C
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
HITTITE
HMC746LC3C_10
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
HITTITE
HMC747LC3C
13 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
HITTITE
HMC747LC3CTR
D Flip-Flop, 747 Series, 1-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CQCC16, 3 X 3 MM, ROHS COMPLIANT, CERAMIC, SMT-16
HITTITE
HMC747LC3C_11
14 Gbps, FAST RISE TIME D-TYPE FLIP-FLOP w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
HITTITE
©2020 ICPDF网 联系我们和版权申明