HI-8190CRH [HOLTIC]
12, Quad, SPST, 3.3V / 5.0V compatible; 12'四路， SPST ， 3.3V / 5.0V兼容
| 型号： | HI-8190CRH |
| 厂家： | 
HOLT INTEGRATED CIRCUITS |
| 描述： | 12, Quad, SPST, 3.3V / 5.0V compatible |
| 文件： | 总9页 (文件大小：83K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HI-8190H, HI-8191H, HI-8192H
12W, Quad, SPST, 3.3V / 5.0V compatible
Analog Switch with High Operating Temperature
July 2013
FEATURES
GENERALDESCRIPTION
·
Extended Temperature Ranges
The HI-8190H family are quad analog CMOS switches fabri-
cated with Silicon-on-Insulator (SOI) technology for latch-up
free operation and maximum switch isolation. They are opti-
mized for use in high temperature avionics applications. The de-
vices are capable of operating at extended temperature ranges
of -55°C to 175°C for plastic packages and -55°C to 200°C for
the ceramic CERDIP-16 package.
·
·
-55°C to 175°C (plastic packages)
-55°C to 200°C (ceramic CERDIP-16 package)
·
3.3V to 15V CMOS analog switches
· Low RON: 12 W to 15 W typical
· Robust CMOS Silicon-on-Insulator (SOI) technology
· SOI switch isolation with 1nA typical Off leakage
· Superior ESD protection > 4KV HBM
· Fast switching time with break-before-make
· Low power
The switch voltages can range from bipolar 3.3V to 15V or
single ended from 3.3V to 15V. The logic supply can range from
3.3V to 5.0V. The HI-8190H provides four each normally open
switches when the switch control inputs are Low. The HI-8191H
provides four each normally closed switches when the switch
control inputs are Low. The HI-8192H provides a combination
of two normally On and two normally Off switches. The limits of
the operating range are defined by the V+/V- bias voltage (rail-
to-rail switching capability).
PIN CONFIGURATIONS (Top Views)
On-resistance of each switch depends upon only the VLOGIC
selection. At 5V, RON ranges from 10Wto 17W while at 3.3V sup-
ply RON ranges from 10W to 22W. Each switch is designed using
back to back high voltage transistors. Switch transistors are
symmetrical and conduct equally well in either direction. Signal
range can run the full rails. Off leakages are very low (1 nA typi-
cal) and charge injection is less than 3 pC. Switch ESD toler-
ance is greater than 4 KV.
IN1 1
S1A 2
S1B 3
V- 4
16 IN2
15 S2A
14 S2B
13 V+
GND 5
S4B 6
S4A 7
IN4 8
12 VLOGIC
11 S3B
10 S3A
The Off state is achieved first before any On condition is ap-
plied. Switching times with a 3.3V VLOGIC supply are typically
35 ns to the On state and 20 ns to the Off state.
9
IN3
HI-8190PSH, 16-Pin SOIC
PRODUCT OPTIONS
APPLICATIONS
PART TYPE IN1 Switch 1 IN2 Switch 2 IN3 Switch 3 IN4 Switch 4
HI-8190H
HI-8191H
HI-8192H
0
1
0
1
0
1
Open
Closed
Closed
Open
0
1
0
1
0
1
Open
Closed
Closed
Open
0
1
0
1
0
1
Open
Closed
Closed
Open
0
1
0
1
0
1
Open
Closed
Closed
Open
· Down-hole drilling and oil exploration
· High temperature avionics
· Data bus isolation
Open
Closed
Open
Closed
Open
Open
· Data Acquisition Systems
· Engine controllers (FADEC)
Closed
Closed
HOLT INTEGRATED CIRCUITS
www.holtic.com
(DS8190H Rev. New)
07/13
HI-8190H, HI-8191H, HI-8192H
PIN DESCRIPTIONS
SIGNAL
IN1
FUNCTION
Logic Input
Switch Node
Switch Node
Supply
DESCRIPTION
HI-8190H and HI-8192H are normally Open when input Low
Switch 1 Node
S1A
S1B
V-
Switch 1 Node
Negative supply for Bipolar configuration. GND for Unipolar use
Reference Ground
GND
S4B
S4A
IN4
Supply
Switch Node
Switch Node
Logic Input
Logic Input
Switch Node
Switch Node
Supply
Switch 4 Node
Switch 4 Node
HI-8190H and HI-8192H are normally Open when input Low
HI-8191H and HI-8192H are normally Closed when input Low
Switch 3 Node
IN3
S3A
S3B
VLOGIC
V+
Switch 3 Node
3.3V or 5.0V Logic supply
Supply
Positive supply for Bipolar and Unipolar configurations
Switch 2 Node
S2B
S1B
IN2
Switch Node
Switch Node
Logic input
Switch 2 Node
HI-8191H and HI-8192H are normally Closed when input Low
24W
24W
T = +200°C
22W
20W
18W
16W
14W
12W
10W
8W
22W
VLOGIC = 3.3V
T = +125°C
T = +25°C
20W
18W
16W
14W
12W
10W
8W
VLOGIC = 5.0V
T = -55°C
-15V
-10V
-5V
0V
5V
10V
15V
-15V
-10V
-5V
0V
5V
10V
15V
VSWITCH
VSWITCH
Typical RON as a function of VLOGIC and VSWITCH
(10mA switch current, 25°C)
Typical RON as a function of VSWITCH and
Temperature (10mA switch current)
VLOGIC = 5V
HOLT INTEGRATED CIRCUITS
2
HI-8190H, HI-8191H, HI-8192H
ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND = 0V)
Supply Voltage, V+: ............................................................................16.5V Operating Temperature Range: (Plastic) ........................ -55°C to +175°C
Supply Voltage, V-:.............................................................................-16.5V
Supply Volgate, VLOGIC .........................................................................5.5V
(Ceramic) ...................... -55°C to +200°C
Switch Current (either direction, DC): .................................................20mA
Peak Switch Current (1 ms pulse, 10% duty cycle max.)..................100mA
Digital Input Voltage (IN1-4):.....................................-0.3V to VLOGIC + 0.3V
Storage Temperature Range: ......................................-65°C to +150°C
Reflow Soldering Temperature: .......................................... +260°C Max.
NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only.
Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
V+ = 15V, V- = -15V, GND = 0V. Operating temperature range (unless otherwise noted).
VLOGIC = 3.3V
VLOGIC = 5.0V
PARAMETER
SYMBOL
CONDITIONS
FIGURE
UNIT
MIN
TYP
MAX
MIN
TYP MAX
SWITCH PARAMETERS
Switch Signal Range
Switch Resistance
VRANGE
RON
-15
+15
V
25°C, 10mA
-55°C to +125°C, 10mA
1
1
10
8
22
26
10
8
17
26
W
W
Leakage
|ISWLEAK|
Switch voltage 15V, 25°C
2
2
2
2
5
20
5
5
20
5
nA
nA
µA
nA
|ISWLEAK| Switch voltage 15V, 125°C
|ISWLEAK| Switch voltage 15V, 200°C
|ISWLEAK| Switch voltage 15V, -55°C
150
150
LOGIC INPUTS
Input High Voltage
Input Low Voltage
Input Current
VIH
VIL
70
70
%VLOGIC
%VLOGIC
µA
30
30
IIN
VIN = 0V or VIN=VLOGIC
-0.5
0.5
-0.5
0.5
SUPPLY
VLOGIC Current
V+ Current
IDD1
IDD2
IEE
Any state
Any state
Any state
2.0
2.0
4.0
2.0
µA
µA
µA
V- Current
-2.0
-2.0
DYNAMIC PARAMETERS
Turn On Time
TON
TOFF
TD
V+/V- = 10V, 25°C
VS = 10V, -55°C to +125°C
3
3
55
35
8
35
55
ns
ns
75
40
Turn Off time
V+/V- = 10V, 25°C
VS = 10V, -55°C to +125°C
3
3
20
25
ns
ns
Break-Before-Make Time
10V signal, 25°C
10V signal, -55°C to +125°C
4
4
8
ns
ns
4
4
Charge Injection
Off Isolation
Crosstalk
Q
VS=0V, RS=0W, 25°C
f = 1 MHz, 25°C
5
6
7
4
4
pC
dB
dB
RR
CR
65
90
65
90
f = 1 MHz, 25°C
Capacitance
COFF
CON
Switch Off, 25°C
Switch On, 25°C
8
9
5
20
5
20
pF
pF
HOLT INTEGRATED CIRCUITS
3
HI-8190H, HI-8191H, HI-8192H
TEST CIRCUITS
IDS
V1
IS(OFF)
SA
ID(OFF)
SA
SB
SB
A
A
+
+
-
+
-
RON = V1/IDS
VS
-
VS
VD
Figure 1 - On Resistance
Figure 2 - Off Leakage
+5V +15V
0.1µF
0.1µF
V
V
IN (HI-8191)
50%
50%
50%
50%
VLOGIC V+
IN (HI-8190)
SA
IN
SB
VOUT
90%
300W
35pF
GND
V-
+
-
50%
VS
V
OUT
0.1µF
-15V
t ON
t OFF
Figure 3. Switching Times
+5V +15V
VLOGIC V+
0.1µF
0.1µF
5V
V
IN
50%
50%
0V
S1A
S1B
S2B
VS1
VS2
VOUT1
VOUT2
90%
S2A
IN
50%
V
OUT1
OUT2
300W
35pF
300W
35pF
0.1µF
GND
V-
90%
V
50%
-15V
t D
t D
Figure 4. Break-Before-Make Time Delay (HI-8192H)
HOLT INTEGRATED CIRCUITS
4
HI-8190H, HI-8191H, HI-8192H
+5V +15V
VLOGIC V+
RS
SA
IN
SB
VOUT
V
IN
CL
10nF
GND
V-
+
-
VS
V
OUT
DVOUT
-15V
QINJ = CL x DVOUT
Figure 5. Charge Injection
+5V +15V
VLOGIC V+
0.1µF
0.1µF
+5V +15V
VLOGIC V+
0.1µF
0.1µF
SA1
SB1
50W
IN1
SA
SB
VOUT
VS
IN
IN2
50W
GND
V-
VS
SB2
SA2
0.1µF
VOUT
50W
NC
-15V
GND
V-
0.1µF
-15V
Figure 6 - Off Isolation
Figure 7 - Channel-to-Channel Crosstalk
+5V +15V
VLOGIC V+
+5V +15V
0.1µF
0.1µF
0.1µF
0.1µF
VLOGIC V+
SA SB
SA
SB
VS
Capacitance
Meter
f=1MHz
Capacitance
Meter
f=1MHz
IN
IN
GND
V-
GND
V-
0.1µF
0.1µF
-15V
-15V
Figure 8 - Off Capacitance
Figure 9 - On Capacitance
HOLT INTEGRATED CIRCUITS
5
HI-8190H, HI-8191H, HI-8192H
FREQUENCYRESPONSE
Figure 10 shows a typical frequency response.
Frequency Response
0.0
-1.0
-2.0
-3.0
-4.0
-5.0
-6.0
-7.0
0
1
10
100
Frequency (MHz)
Figure 10. Frequency Response.
HOLT INTEGRATED CIRCUITS
6
HI-8190H, HI-8191H, HI-8192H
ORDERING INFORMATION
HI - 819x PS H F
LEAD
PART
NUMBER
FINISH
100% Matte Tin (Pb-free, RoHS compliant)
F
PART
NUMBER
PACKAGE
DESCRIPTION
16 PIN PLASTIC NARROW BODY SOIC (16HN): -55oC to +175oC.
PS
PART
NUMBER
FUNCTION
QUAD SWITCH, NORMALLY OPEN
8190
8191
QUAD SWITCH, NORMALLY CLOSED
8192
QUAD SWITCH, TWO NORMALLY OPEN, TWO NORMALLY CLOSED
HI - 819x CR H
PART
NUMBER
PACKAGE
DESCRIPTION
16 PIN CERDIP (16D) not available Pb-free: -55oC to +200oC.
CR
PART
NUMBER
FUNCTION
QUAD SWITCH, NORMALLY OPEN
8190
8191
QUAD SWITCH, NORMALLY CLOSED
8192
QUAD SWITCH, TWO NORMALLY OPEN, TWO NORMALLY CLOSED
HOLT INTEGRATED CIRCUITS
7
HI-8190, HI-8191, HI-8192
REVISION HISTORY
P/N
Rev
Date
Description of Change
Initial release
DS8190H
New
07/23/13
HOLT INTEGRATED CIRCUITS
8
HI-8190 PACKAGE DIMENSIONS
16-PIN PLASTIC SMALL OUTLINE (SOIC) - NB
(Narrow Body)
inches (millimeters)
Package Type: 16HN
.0087 .0012
(.220 .029)
.390 .004
(9.90 .10)
.236 ±.008
(5.99 ±.20)
.1525 .0025
(3.87 .06)
Top View
See Detail A
.0165 .003
(.419 .089)
.061 .007
(1.549 .178)
.050
BSC
(1.27)
0° to 8°
.0069 .0029
(.176 .074)
.033 .017
(.838 .432)
Detail A
BSC = “Basic Spacing between Centers”
is theoretical true position dimension and
has no tolerance. (JEDEC Standard 95)
inches (millimeters)
16-PIN CERDIP
Package Type: 16D
.050 max
(1.27 max)
.790 max
(20.006 max)
.005 min
(.127 min)
.288 ±.005
(7.315 ±.125)
.100
(2.54)
BSC
.056 typ
(1.422 typ)
.310 ±.010
(7.874 ±.254)
.180 max
(4.572 max)
.200 max
(5.080 max)
.015 min
(.381 min)
0° to 15°
.010 ±.002
(.254 ±.051)
.018 ±.003
(.457 ±.760)
.125 min
(3.175 min)
BSC = “Basic Spacing between Centers”
is theoretical true position dimension and
has no tolerance. (JEDEC Standard 95)
HOLT INTEGRATED CIRCUITS
9
相关型号：
©2020 ICPDF网 联系我们和版权申明