首页 |元器件品牌

2CPSA2D3 [HONEYWELL]

Snap Acting/Limit Switch;
2CPSA2D3
型号： 2CPSA2D3
厂家： Honeywell    Honeywell
描述：

Snap Acting/Limit Switch
文件： 总10页 (文件大小：711K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
CPS Series  
Cable Pull Safety Switch  
FEATURES  
• Direct opening action  
of NC  
(normally closed) contacts  
• 2CPS: 2NO/2NC, 1NO/3NC or 4NC  
contact configurations  
1CPS: 1NO/1NC, 2NO/2NC, 1NO/3NC or  
4NC contact configurations  
• Typical cable span of 76 m (250 ft) in an  
environment with a temperature change  
of ±17 °C (±30 °F). Longer spans are  
possible depending upon temperature  
change and installation  
BG  
(Applied for)  
(ref. note on page 6 for more details or  
Application note - Effect of Temperature  
on Cable Pull Switch Operation)  
• Choice of three actuator configurations  
(2CPS)  
• Removable contact block version  
available (2CPS)  
• Large wiring cavity with straight-  
through wiring  
CPS Series Cable Pull Safety Switches provide a readily accessible emergency stop  
signal. This is a cost-effective means compared to using multiple emergency stop  
push-buttons. (Cable Pull Safety Switches are not, however, to be used as a means  
of personnel safeguarding. They may be used to prevent further injury or damage to  
equipment when used for emergency stop signaling.)  
The CPS Series Cable Pull Safety switch is designed to provide emergency stop  
protection for exposed conveyor and assembly lines. The internal mechanism  
latches on both slackened cable (push) and pulled cable. This capability also en-  
hances productivity by eliminating nuisance stops due to variations in temperature,  
stretch of cable over time, and other application variables.  
• 24 Vdc or 120 Vac bright, multicluster  
LED status indicator light available on  
2CPS. Single high intensity LED on 1CPS  
• Gold-plated contacts are standard on  
2CPS, available on 1CPS  
The 1CPS is intended for use in applications where the cable span is 76 m (250 ft)  
or shorter. It is an economical solution for shorter runs or zone protection typical to  
automated systems. The 2CPS series is intended for use in very long cable runs of  
152 m (500 ft) or shorter, such as long conveyor lines found in warehouses.  
• Die-cast zinc housing  
• Optional hardware packs available  
A line in the midpoint of the cable tension window indicates proper cable tension,  
providing easy set-up. The direct opening switch contacts are held closed when the  
actuating cable is under proper tension and the reset knob is set to RUN. When the  
actuating cable is pulled, slackened or broken, a cam positively opens the NC (Nor-  
mally Closed) switch contacts. The snap action, trip operation causes the switch  
contacts to change state and mechanically latch almost simultaneously when the  
cable is pulled, slackened or broken. The NC switch contacts remain open until the  
CPS is reset by properly tensioning the cable and manually rotating the reset knob.  
TYPICAL APPLICATIONS  
• Long conveyor systems found in  
warehouses and distribution centers  
• Conveyor systems having a high amount  
of vibration  
• Conveyor systems that experience wide  
temperature swings  
• Long conveyor systems where easy  
through wiring, or highly visible trip  
status is required  
• Hose down conditions  
• Packaging equipment  
• Assembly lines  
When the direct opening switch contacts open, the auxiliary contacts also actuate  
(open contacts close and closed contacts open). The auxiliary contacts are electri-  
cally isolated from the direct opening switch contacts. These NO (Normally Open)  
contacts may be used for monitoring or signaling.  
The CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive  
93/68/EEC; Machinery Directive 98/37/EEC only as the directives relate to the  
components being used in a safety function; IEC/EN 60947-1; IEC/EN 60947-5-1;  
IEC/EN 60947-5-5.  
!
WARNING  
MISUSE OF DOCUMENTATION  
•
The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE this document as system  
installation information.  
•
Complete installation, operation and maintenance information is provided in the instructions supplied with each product.  
Failure to comply with these instructions could result in death or serious injury.  
• Safety Products for Machine Safeguarding •  
1
© Honeywell International Inc. - April 2003  
1CPS  
Cable Pull Safety Switch  
Technical Data  
1 NORMALLY CLOSED/  
1 NORMALLY OPEN  
2 NORMALLY CLOSED/  
2 NORMALLY OPEN  
21  
22  
21  
13  
22  
14  
21  
13  
22  
14  
Mechanical  
life  
1 000 000 operations  
13  
14  
Degree of  
protection  
IP 67  
NEMA 1, 4, 12, 13  
F
0
*9,9  
*9,9  
F
0
Temperature  
range  
Operating:  
G
3,8  
H
7,9  
(0.39)  
12,7  
(0.50)  
(0.39)  
*9,9  
*9,9  
G
3,8  
H
7,9  
7,9  
3,8  
12,7  
(0.39)  
12,7  
(0.50)  
(0.39)  
-25 °C to +80 °C /  
-13 °F to +176 °F  
without condensation  
(0.31) (0.15) (0.15) (0.31)  
(0.50)  
7,9  
3,8  
12,7  
(0.50)  
(0.31) (0.15) (0.15) (0.31)  
21-22  
13-14  
A
B
21-22  
13-14  
A
21-22  
13-14  
C
D
E
Approvals  
IEC/EN 60947-1  
IEC/EN 60947-5-1  
IEC/EN 60947-5-5  
AC15 A300  
C
D
E
#6-32 UNC  
#6-32 UNC  
DC13 Q300  
UL & CSA  
21  
22  
21  
22  
21  
22  
BG Applied for  
13  
14  
13  
14  
13  
14  
Vibration  
Shock  
10 Hz - 500 Hz, 5 g  
15 g  
Contact  
Silver standard  
I
I
material  
Gold plated optional  
A
Left switch  
Included  
accessories  
None  
B
C
D
E
F
G
H
I
Right switch  
Slackened cable  
Proper cable tension  
Pulled cable  
Cable tension = 111 N (25 lb)  
Cable tension = 133 N (30 lb)  
Cable tension = 178 N (40 lb)  
Ground screw  
Contact closed  
Contact open  
Conduit  
Thread  
= 1/2" NPT  
A
C
1
2
= 20 mm  
Gold-plated contacts  
6
5
Ordering:  
1CPS  
X
X
Example: 1CPSA1A  
2
• Safety Products for Machine Safeguarding •  
© Honeywell International Inc. - April 2003  
Indicator-Pilot Light Code  
3 NORMALLY CLOSED/  
1 NORMALLY OPEN  
4 NORMALLY CLOSED  
12  
22  
12  
22  
11  
21  
11  
21  
12  
22  
21  
13  
22  
14  
11  
21  
F
0
F
0
*9,9  
(0.39)  
*9,9  
(0.39)  
*9,9  
(0.39)  
*9,9  
(0.39)  
H
G
H
G
12,7  
7,9  
3,8  
3,8  
7,9  
12,7  
(0.50)  
12,7  
7,9  
3,8  
3,8  
7,9  
12,7  
(0.50)  
A : 24 V LED  
A
B
(0.50)  
(0.31) (0.15) (0.15) (0.31)  
(0.50)  
(0.31) (0.15) (0.15) (0.31)  
21-22  
13-14  
11-12  
21-22  
A
B
A
B
11-12  
21-22  
11-12  
21-22  
C
D
E
C
D
E
#6-32 UNC  
#6-32 UNC  
11  
12  
11  
12  
21  
22  
11  
12  
B : 120 V LED  
21  
22  
21  
22  
13  
14  
21  
22  
I
I
4
3
7
8
X
• Safety Products for Machine Safeguarding •  
3
© Honeywell International Inc. - April 2003  
2CPS  
Cable Pull Safety Switch  
Technical Data  
2 NORMALLY CLOSED/  
2 NORMALLY OPEN  
3 NORMALLY CLOSED/  
1 NORMALLY OPEN  
12  
22  
21  
13  
22  
14  
11  
21  
21  
13  
22  
14  
21  
13  
22  
14  
Mechanical  
life  
1 000 000 operations  
Degree of  
protection  
IP 67  
NEMA 1, 4, 12, 13  
F
0
F
0
*9,9  
*9,9  
*9,9  
*9,9  
Temperature  
range  
Operating:  
G
3,8  
H
7,9  
(0.39)  
12,7  
(0.50)  
(0.39)  
G
3,8  
H
7,9  
(0.39)  
(0.39)  
7,9  
3,8  
12,7  
12,7  
7,9  
3,8  
12,7  
(0.50)  
-40 °C to +80 °C /  
-40 °F to +176 °F  
without condensation  
(0.31) (0.15) (0.15) (0.31)  
(0.50)  
(0.50)  
(0.31) (0.15) (0.15) (0.31)  
21-22  
13-14  
21-22  
13-14  
A
B
A
B
11-12  
21-22  
21-22  
13-14  
Approvals  
IEC/EN 60947-1  
IEC/EN 60947-5-1  
IEC/EN 60947-5-5  
AC15 A300  
C
D
E
C
D
E
DC13 Q300  
UL & CSA  
A
B
C
D
E
F
G
H
I
Left switch  
Right switch  
Slackened cable  
Proper cable tension  
Pulled cable  
Cable tension = 111 N (25 lb)  
Cable tension = 133 N (30 lb)  
Cable tension = 178 N (40 lb)  
Ground screw  
BG  
Vibration  
Shock  
10 Hz - 500 Hz, 5 g  
15 g  
Contact closed  
Contact open  
Contact  
material  
Gold plate  
over silver  
Included  
accessories  
Turnbuckle(s)  
Contact blocks mounted to housing  
I
M3  
21  
13  
21  
13  
22  
14  
22  
14  
Contact  
block  
Conduit  
Thread  
mounting  
= to housing  
1/2" NPT =  
A
1
2
A
B
= removable with  
heavy duty  
terminals  
20 mm =  
C
Ordering:  
2CPS  
X
X
X
Example: 2CPSA1A2B  
4
• Safety Products for Machine Safeguarding •  
© Honeywell International Inc. - April 2003  
Actuation Code  
Indicator Light Code  
4 NORMALLY CLOSED  
12  
22  
12  
22  
11  
21  
11  
21  
F
0
*9,9  
(0.39)  
*9,9  
(0.39)  
G
H
12,7  
7,9  
3,8  
3,8  
7,9  
12,7  
(0.50)  
1: Maintained both sides  
No letter: no indicator provided  
(0.50)  
(0.31) (0.15) (0.15) (0.31)  
1
11-12  
21-22  
A
B
11-12  
21-22  
C
D
E
2: Maintained left side,  
no actuation right side  
A: 24 Vdc red multi-cluster LED  
B: 120 Vac red multi-cluster LED  
2
3
A
B
3: Maintained right side,  
no actuation left side  
Removable contact blocks with heavy duty wiring receptacles  
I
#6-32 UNC  
21 22  
13 14  
21 22  
13 14  
D
X
X
• Safety Products for Machine Safeguarding •  
5
© Honeywell International Inc. - April 2003  
Temperature-Span Distance Application Information  
Cable Pull Switches featuring broken cable detection require pre-tensioning in order to enable the RUN condition.  
The relative expansion or contraction of the steel actuating cable when the ambient temperature increases or decreases must be  
taken into account when pre-tensioning a cable pull switch.  
The change in cable length with change in temperature can cause significant nuisance shut downs on longer runs.  
Install the system when the temperature is at the mid point of the extremes. If a warehouse has a low temperature of 15,6 °C  
(60 °F) and a high of 32,2 °C (90 °F), set up the system at the midpoint 23,9 °C (75 °F).  
Use an endspring or another CPS at the opposite end of the cable span to double the temperature tolerance and to meet the  
requirements of EN 418.  
+27,8 ˚C  
[+50 ˚F]  
+16,7 ˚C  
[+30 ˚F]  
D
+8,3 ˚C  
[+15 ˚F]  
C
0 ˚C  
[0 ˚F]  
A
B
C
-8,3 ˚C  
[-15 ˚F]  
-16,7 ˚C  
[-30 ˚F]  
D
-27,8 ˚C  
[-50 ˚F]  
22,9 m  
[75 ft]  
45,7 m  
[150 ft]  
68,8 m  
[225 ft]  
76,2 m  
[250 ft]  
137,2 m  
[450 ft]  
160,0 m  
[525 ft]  
182,9 m  
[600 ft]  
205,7 m  
[675 ft]  
228,6 m  
[750 ft]  
0 m  
[0 ft]  
114,3 m  
[375 ft]  
E
A = Total temperature variation  
B = Setup point - Ideally at middle of temperature extremes  
C = Cable Pull Switch usable temperature span without endspring or second CPS  
D = Cable Pull Switch usable temperature span with endspring or second CPS  
E = Cable span distance  
6
• Safety Products for Machine Safeguarding •  
© Honeywell International Inc. - April 2003  
Application information  
1CPS  
C
A
B
D
E
F
G
I
H
K
J
H
G
J
A
B
C
D
0,46 m [18 in] maximum  
2,4 m [8 ft] maximum  
76 m [250 ft] typical  
Reset knob  
E
Tension indicator line is in center  
of indicator window – cable is  
properly tensioned  
J-hook turnbuckle  
Thimble  
H
I
J
K
Cable clamp  
Cable support (eyebolt)  
Cable  
Endspring  
F
G
2CPS  
C
A
B
D
D
E
K
RUN  
OFF  
K
E
N
C
C
N
A
A
I
L
L
IO  
S
S
S
S
N
N
E
E
T
T
J
D
D
E
E
G
G
I
K
F
F
H
H
D
D
K
K
E
RUN  
OFF  
E
C
C
N
N
A
A
I
L
L
IO  
S
S
S
S
N
N
E
E
T
T
M
N
L
D
D
K
K
E
RUN  
OFF  
E
C
C
N
N
A
A
I
L
L
IO  
S
S
S
S
N
N
E
E
T
T
A
B
C
D
E
F
46 cm [18 in] maximum  
2,4 m [8 ft] maximum  
76 m [250 ft] typical  
J-hook turnbuckle (included)  
Thimble  
G
H
I
Cable support  
Endspring  
Tension indicator line is in  
center of indicator window -  
left cable is properly tensioned  
Reset knob  
K
Tension indicator line is in  
center of indicator window -  
right cable is properly tensioned  
Thimble  
Cable clamp  
Cable  
L
M
N
J
Cable clamp  
• Safety Products for Machine Safeguarding •  
7
© Honeywell International Inc. - April 2003  
Hardware packets (available separately)  
Listing  
CLSZC1  
CLSZC2  
Accessory  
Cable - 7,6 m (25 ft) length  
Cable - 15,2 m (50 ft) length  
CLSZC3  
CLSZC4  
CLSZC5  
CLSZC7  
CLSZTC  
Cable - 30,5 m (100 ft) length  
Cable - 45,7 m (150 ft) length  
Cable - 61 m (200 ft) length  
Cable - 76,2 m (250 ft) length  
(2) Thimbles  
(2) Low-profile Duplex Cable Clamps  
CPSZ1S  
CPSZK1  
(1) Draw-bar Endspring  
(1) J-hook Turnbuckle with Lock Nuts  
(2) Thimbles  
(2) Low-profile Duplex Cable Clamps  
(16) Sets of Cable Supports ((16) 1/4-20 Eye Bolts, (32) 1/4-20 Nuts,  
(32) Flat Washers, (16) Lock Washers)  
CPSLED24  
CPSLED120  
CPS-BRACKET  
CPSZTB  
Multicluster LED Accessory - 24 Vdc (conduit mount)  
Multicluster LED Accessory - 120 Vdc (conduit mount)  
Mounting bracket (to be used with 1CPS or 2CPS)  
J-hook turnbuckle with lock nuts (included with 2CPS)  
CPSLED  
71,88 ±2,54  
[2.83 ±0.10]  
11,43  
[0.45]  
C
31,75  
[1.25]  
B
D
A
207,01 ±1,27  
[8.15 ±0.05]  
227,33 ±12,7  
[8.95 ±0.50]  
A
B
C
D
Multi-LED red pilot light  
1/2-14 NPom Thread  
18 AWG red PVC insulation  
18 AWG black PVC insulation  
CPS-BRACKET  
8
• Safety Products for Machine Safeguarding •  
© Honeywell International Inc. - April 2003  
Mounting dimensions (mm/in)  
1CPS  
172,72  
[6.8]  
6,35  
[0.25]  
152,4  
[6.0]  
81,28  
[3.2]  
B
99,06  
[3.9]  
33,02  
[1.3]  
88,9  
[3.5]  
76,2  
[3.0]  
4X Ø 7,11  
Ø 0.28  
12,7  
[0.5]  
50,8  
[2.1]  
117,42  
[4.623]  
A
65,20  
[2.567]  
56,79  
[2.236]  
50,83  
[2.001]  
25,4  
[1.00]  
3X 25,4  
[1.0]  
25,4  
[1.00]  
2X 26,67  
[1.050]  
C
D
A
B
C
D
Fully extended  
Optional indicator  
Conduit thread (3 total)  
Mounting pad (4 total)  
2CPS  
40,4  
(1.60)  
79,8  
(3.14)  
67,8  
(2.63)  
92,9  
(3.66)  
325,9  
(12.75)  
A
152,4  
(6.00)  
52,1  
(2.05)  
12,7  
(0.50)  
18,3  
(0.72)  
21,1  
(0.75)  
D
D
K
K
E
E
RUN  
OFF  
C
C
34,9  
(1.38)  
N
N
A
A
IO  
L
L
IO  
D
2X  
S
S
S
S
N
N
E
E
T
T
2X 8,9  
(0.35)  
81,3  
(3.20)  
152,4  
(6.00)  
40,5  
(1.60)  
2X 6,9  
(0.27)  
104,8  
(4.13)  
C
2X  
B
2X 31,75  
(1.25)  
6,4  
(0.25)  
57,2  
D
2X  
12,7  
(0.50)  
C
(2.25)  
2X 6,9  
(0.27)  
139,7  
(5.50)  
3X 21,5  
(0.85)  
244,6  
(9.63)  
A
A
B
C
D
Fully extended  
Optional indicator  
D
D
K
K
E
E
RUN  
OFF  
C
C
N
N
A
A
IO  
L
IO  
Conduit thread (3 total)  
Mounting pad (4 total)  
L
S
S
S
S
N
N
E
E
T
T
• Safety Products for Machine Safeguarding •  
9
© Honeywell International Inc. - April 2003  
Specifications may change at any time without notice. The information we  
supply is believed to be accurate and reliable as of this printing. However,  
we assume no responsibility for its use.  
Warranty and remedy  
Honeywell warrants goods of its manufacture as being free of defective  
materials and faulty workmanship. Contact your local sales office for war-  
ranty information. If warranted goods are returned to Honeywell during  
the period of coverage, Honeywell will repair or replace without charge  
those items it finds defective. The foregoing is Buyer’s sole remedy and is  
in lieu of all other warranties, expressed or implied, including those of  
merchantability and fitness for a particular purpose.  
Sales and Service  
Honeywell serves its customers through a worldwide network of sales  
offices and distributors. For application assistance,current specifications,  
pricing or name of the nearest Authorised Distributor, contact a nearby  
sales office or:  
While we provide application assistance, personally, through our literature  
and the Honeywell web site, it is up to the customer to determine the  
suitability of the product in the application.  
INTERNET: www.honeywell.com/sensing  
E-mail: info.sc@honeywell.com  
New Zealand  
Honeywell Limited  
Phone: +(64-9) 623-5050  
FAX: +(64-9) 623-5060  
Toll Free (0800) 202-088  
ASIA PACIFIC  
Czech Republic  
Romania  
LATIN AMERICA  
Honeywell spol. s.r.o.  
Phone:+(420) 2 6112 3469/  
3424  
Honeywell Bucharest  
Phone: +(40) 1 2110076  
FAX: +(40) 1 2103375  
Control Products Asia Pacific  
Headquarters  
Phone: +(65) 6355-2828  
FAX: +(65) 6445-3033  
Argentina  
Honeywell S.A.I.C.  
Phone: +(54-11) 4383-3637  
FAX: +(54-11) 4325-6470  
FAX: +(420) 2 6112 3461  
Commonwealth of Indepen-  
dent States (CIS)  
Philippines  
Denmark  
Honeywell Systems (Philippines) Inc.  
Phone: +(63-2) 636-1661/1662  
FAX: +(63-2) 638-4013  
Australia  
Honeywell Limited  
Phone: +(61) 2-9370-4500  
FAX: +(61) 2-9370-4525  
Toll Free 1300-36-39-36  
Toll Free Fax 1300-36-04-70  
Honeywell A/S  
Phone: +(45) 39 55 55 55  
FAX: +(45) 39 55 55 58  
ZAO Honeywell  
Phone: +(7 095) 796 98 36  
FAX: +(7 095) 796 98 93  
Brazil  
Honeywell do Brasil & Cia  
Phone: +(55-11) 7266 1900  
FAX: +(55-11) 7266 1905  
Singapore  
Finland  
Honeywell OY  
Phone: +(358) 9 3480101  
FAX: +(358) 9 34801375  
Slovak Republic  
Honeywell s.r.o.  
Phone: +(421 7) 58247403/400  
FAX: +(421 7) 58247 415  
Honeywell South East Asia  
Phone: +(65) 6355-2828  
FAX: +(65) 6445-3033  
Chile  
Honeywell Chile, S.A.  
Phone: +(56-2) 233-0688  
FAX: +(56-2) 231-6679  
China - PRC - Beijing  
Honeywell (Tianjin) Ltd.  
Phone: +(86-10) 8458-3280  
FAX: +(86-10) 8458-3102  
Taiwan R.O.C.  
France  
Honeywell SA  
Phone: +(33) 1 60 19 80 40  
FAX: +(33) 1 60 19 81 73  
South Africa (Republic of)  
Honeywell Southern Africa  
Honeywell S.A. Pty. Ltd  
Phone: +(27) 11 695 8000  
FAX +(27) 11 805 1504  
Honeywell Taiwan Ltd.  
Phone: +(886-2) 2245-1000  
FAX: +(886-2) 2245 3242  
Columbia  
Honeywell Columbia, S.A.  
Phone: +(57-1) 623-3239/3051  
FAX: +(57-1) 623-3395  
China - PRC - Shanghai  
Honeywell China Inc.  
Phone: +(86-21) 6237-0237  
FAX: +(86-21) 6237-1237  
Thailand  
Germany  
Honeywell AG  
Phone: +(49) 69 8064 444  
FAX: +(49) 69 8064 442  
Honeywell Systems Ltd.  
Phone: +(662) 693 3099  
FAX: +(662) 693 3085  
Spain  
Honeywell S.A.  
Phone: +(34) 91 313 6100  
FAX: +(34) 91 313 6129  
Ecuador  
Honeywell S.A.  
Phone: +(593-2) 981-560/1  
FAX: +(593-2) 981-562  
China - Hong Kong SAR  
Honeywell Ltd.  
Phone: +(852) 2953-6412  
FAX: +(852) 2953-6767  
NORTH AMERICA  
Hungary  
Honeywell Kft.  
Phone: +(36 1) 451 4300  
FAX: +(36 1) 451 4343  
Sweden  
Honeywell AB  
Phone: +(46) 8 775 55 00  
FAX: +(46) 8 775 56 00  
Mexico  
Canada  
Honeywell LTD  
Phone: 1-800-737-3360  
FAX: 1-800-565-4130  
Honeywell S.A. de C.V.  
Phone: +(52) 55 5259-1966  
FAX: +(52) 55 5570-2985  
India  
Tata Honeywell Ltd  
Phone: +(91) 20 687 0445/  
0446  
FAX: +(91) 20 681 2243/  
687 5992  
Italy  
Honeywell S.p.A.  
Phone: +(39) 02 92146 450/  
456  
Switzerland  
Honeywell AG  
Phone: +(41) 1 855 24 40  
FAX: +(41) 1 855 24 45  
Peru  
Honeywell Peru  
Phone: +(511) 445-2136-1891  
FAX: +(511) 348-3552  
USA  
Control Products,  
International Headquarters  
Phone:1-800-537-6945  
1-815-235-6847  
FAX: 1-815-235-6545  
E-mail: info.sc@honeywell.com  
FAX: +(39) 02 92146 490  
Indonesia  
Honeywell Indonesia Pte Ltd  
Phone: +(62-21) 535-8833  
FAX: +(62-21) 5367 1008  
The Netherlands  
Honeywell B.V.  
Phone: +(31) 20 565 69 11  
FAX: +(31) 20 565 66 00  
Turkey  
Puerto Rico  
Honeywell Inc.  
Phone: +(809) 792-7075  
FAX: +(809) 792-0053  
Honeywell Turkey A.S.  
Phone: +(90) 216 575 6620  
FAX: +(90) 216 575 6637  
EUROPE  
Japan  
Honeywell Inc  
Phone: +(81) 3 5440 1425  
FAX: +(81) 3 5440 1368  
Norway  
Honeywell A/S  
Phone: +(47) 66 76 20 00  
FAX: +(47) 66 76 20 90  
United Kingdom  
Trinidad  
Honeywell Inc.  
Phone: +(868) 624-3964  
FAX: +(868) 624-3969  
Austria  
Honeywell Control Systems Ltd  
Phone: +(44) 1698 481 481  
FAX: +(44) 1698 481 276  
Honeywell Austria GmbH  
Phone: +(43) 1 727 80 366/246  
FAX: +(43) 1 727 80 337  
South Korea  
Honeywell Korea Co. Ltd  
Phone: +(822) 799-6167  
FAX: +(822) 792-9013  
Poland  
Mediterranean & African  
Distributors  
Honeywell SpA  
Phone: +(39) 2 921 46 232  
FAX: +(39) 2 921 46 233  
Venezuela  
Honeywell CA  
Phone: +(58-2) 238-0211  
FAX: +(58-2) 238-3391  
Belgium  
Honeywell Sp. zo.o  
Phone: +(48) 22 606 0900  
FAX: +(48) 22 606 0901  
Honeywell SA/NV  
Phone: +(32) 2 728 2522  
FAX: +(32) 2 728 2502  
Malaysia  
Honeywell Engineering Sdn Bdh  
Phone: +(60-3) 7958-4988  
FAX: +(60-3) 7958-8922  
Portugal  
Bulgaria  
Honeywell EOOD  
Phone: +(359) 2 79 40 27  
FAX: +(359) 2 79 40 90  
Honeywell Portugal Lda  
Phone: +(351 21) 424 50 00  
FAX: +(351 21) 424 50 99  
Middle East Headquarters  
Honeywell Middle East Ltd.  
Phone: +(9712) 443 2119  
FAX +(9712) 443 2536  
This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is the  
customer's responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are available on  
request. © 2003 Honeywell International Inc. All rights reserved.  
Honeywell  
Honeywell  
Honeywell  
21 Chemin du Vieux Chêne  
38240 Meylan Cedex  
France  
Newhouse Industrial Estate  
Motherwell ML1 5SB  
Lanarkshire, Scotland, U.K.  
11 West Spring Street  
Freeport, Illinois 61032  
USA  
107122-02-EN FR26 GLO 403 Printed in France  
www.honeywell.com/sensing  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明