380C32500 [HONEYWELL]
Potentiometer, Conductive Plastic, 2W, 2500ohm, 10% +/-Tol, 1 Turn(s);型号: | 380C32500 |
厂家: | Honeywell |
描述: | Potentiometer, Conductive Plastic, 2W, 2500ohm, 10% +/-Tol, 1 Turn(s) |
文件: | 总48页 (文件大小:6920K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2 W Conductive Plastic
Potentiometers
380 Series, RV4 Series, 485 Series,
53C Series, 385 Series
Datasheet
Conductive Plastic Potentiometers
Potentiometers convert rotary motion into a change of resistance, supplying a smooth transition of voltage or current levels.
The resulting voltage output may be used to control position transducers in a wide variety of potential applications.
The five series listed below are all 2 W plastic potentiometers and are available in resistances from 100 Ohm to 5 MOhm,
inclusive. Available tapers include linear, log, and antilog to meet a wide range of application requirements. These single
turn devices have a 6,35 mm [0.250 in] diameter shaft that is available in a range of lengths. Most shafts are nickel-plated
brass. Most configurations have a standard 3/8-32 NEF-2A bushing; a high torque version is also available. Termination
types are solder lug (with or without a center tap), PC pin or fast-on, all are solder-dipped. Custom designs are available
upon request.
•
•
•
•
•
380 Series: 2 W conductive plastic potentiometer offering low contact resistance variation and a long rotational life
RV4 Series: Military version of the 380 Series; meets MIL-R-94 requirements (non RoHS compliant)
485 Series: Custom version of the 380 Series
53C Series: Cost-effective version of the 380 Series
385 Series: Custom version of the 53C Series
Key Features and Benefits
,
Table of Contents
•
•
•
Cost-effective: Supplies good performance at a reasonable
price
General Specifications ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3-6
General Configuration Guide ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 7
380 Series:
Wide range of resistance values (100 Ohm to 5 MOhm,
inclusive): Promotes flexibility in the applications
Wide variety of tapers: Creates flexibility in output signal
profile, allowing use in a wide variety of applications
Specific Configurations ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 8
Order Guides ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 9-15
RV4 Series:
Potential Applications
INDUSTRIAL/COMMERCIAL
Specific Configurations ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 16
Order Guides ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ17-18
485 Series:
•
Audio and visual equipment (e.g., musical instruments,
sound mixers, projectors, amplifiers)
•
Foot pedal controls (e.g., guitars, sewing machines,
woodworking equipment)
Specific Configurations ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 19-21
Order Guides ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 22-31
53C Series:
•
Machine controls (e.g., joysticks)
•
Welding equipment (e.g., MIG wire feed, foot pedal controls,
adjustment knobs)
Specific Configurations ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 32
Order Guides ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 33-37
TRANSPORTATION
•
Foot pedal controls (e.g., golf carts)
Gear shifter, joystick, and throttle position (e.g., construction/
agricultural vehicles)
385 Series:
•
Specific Configurations ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 38-39
Order Guides ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 40-46
Additional Informationꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ back page
COST-EFFECTIVE • MIL-R-94 • CUSTOMIZATION AVAILABLE
Sensing and Productivity Solutions
2
General Specifications
Table 1. Electrical Specifications
Characteristic
380 Series
RV4 Series
485 Series
53C Series
385 Series
Maximum working voltage:
linear tapers
log, reverse log tapers
500 Vdc
350 Vdc
Dielectric strength
Power rating
1000 Vac for 60 s at 1 mPa [atm], 450 Vac for 60 s at 11,5 kPa [3.4 inHg]
2 W at 70 °C [158 °F], derated to 120 °C [248 °F]
Taper
See Order Guides under each series
CRV1:
linear tapers
log, reverse log tapers
3% max. total resistance
3% max. total resistance
Resistance
100 Ohm to 5 MOhm, inclusive. See individual Order Guides under each series.
See Order Guides under each series.
See Order Guides under each series.
5%
Resistance tolerance
End resistance
Linearity
See Order Guides under each series.
Electrical rotation
1Contact resistance variation is the maximum momentary change in contact resistance that occurs when the wiper is moved from one
location to another location. The larger this change, the more difficult it is to set the trimmer potentiometer and the more unstable the long
term setting will be.
Table 2. Mechanical Specifications
Characteristic
380 Series
RV4 Series
485 Series
53C Series
385 Series
Shaft:
nickel-plated brass1
6,35 mm [0.250 in]
material
diameter
Retaining ring
material
nickel-plated
beryllium copper
nickel-plated brass
nickel-plated brass
Bushing:
material
thread
nickel-plated brass
3/8-32 NEF-2A
Termination base
material
thermoset
brass; solder
(SAC305) dip or
tin-lead finish
brass; solder
(SAC305) dip finish
brass; solder
(SAC305) dip finish
brass; solder (SAC305) dip or
tin-lead finish
Terminal material
Housing material
Base material
stainless steel
thermoset plastic
Mounting
hardware material:
jam nut
mounting nut
lock washer
o-ring
nickel-plated brass
nickel-plated brass
nickel-plated brass phospher bronze1
silicone rubber
Operating torque
Stop torque
See Order Guides under each series.
See Order Guides under each series.
32.7 g [0.072 lb]
Weight (approx.)
1Unless otherwise specified on the Order Guides under each series.
Sensing and Productivity Solutions
3
General Specifications
Table 3. Environmental Specifcations
Characteristic
380 Series
RV4 Series
485 Series
53C Series
385 Series
Operating temperature
Rotational life
-55 °C to 120 °C [-67 °F to 248 °F]
tested to 25,000 cycles
Table 4. Maximum Percent Temporary Resistance from 25 °C [77 °F]
Nominal
Temperature
-55 °C
[-67 °F]
-40 °C
[-40 °F]
0 °C
[32 °F]
25 °C
[77 °F]
55 °C
[131 °F]
85 °C
[185 °F]
120 °C
[248 °F]
Resistance
1.5
+2.0
+2.5
+3.0
100 Ohm
10 kOhm
100 kOhm
1 MOhm
5.0
+7.0
4.0
+5.5
+6.0
+8.0
0
0
0
0
1.5
1.5
2.0
2.5
2.0
2.5
3.5
4.0
3.5
5.5
6.0
7.5
+8.0
+10.0
Figure 1. Electrical Taper Diagrams (For reference only.)
Log (Z)
Reverse Log (RZ)
Linear: 2.5% to 97.5% (S-1)
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
0
0
0
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
Angular Rotation, Clockwise Left to Right (%)
Angular Rotation, Clockwise Left to Right (%)
Linear: 5% to 95% (S-2)
Linear: 7.5% to 92.5% (S-3)
Linear: 10% to 90% (S-4)
100
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
90
80
70
60
50
40
30
20
10
0
0
0
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
4
General Specifications
Figure 1. Electrical Taper Diagrams (continued)
Linear: 15% to 95% (S-5)
Linear: 25% to 75% (S-6)
Linear: 35% to 65% (S-7)
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
0
0
0
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
Linear: 37.5% to 82.5% (S-8)
Linear: 42.5% to 57.5% (S-9)
Linear: 45% to 55% (S-10)
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
0
0
0
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
Linear: 5% to 50%; 50% to 90% (S-11)
Linear: 10% to 40%; 57.5% to 82.5% (S-12) Linear: 10% to 45%; 55% to 90% (S-13)
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
0
0
0
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
Angular Rotation, Clockwise Left to Right (%)
Angular Rotation, Clockwise Left to Right (%)
Linear: 35% to 45%; 55% to 65% (S-14) Linear: 45% to 47.5%; 47.5% to 52.5%;
52.5% to 55% (S-15)
Linear: 5% to 40%; 45% to 52.5%;
60% to 95% (S-16)
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
100
90
80
70
60
50
40
30
20
10
0
0
0
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
Angular Rotation, Clockwise Left to Right (%)
Angular Rotation, Clockwise Left to Right (%)
Sensing and Productivity Solutions
5
General Specifications
Figure 2. Power Derating Curve
100
90
80
70
60
50
40
30
20
10
0
0
10 20 30 40 50 60 70 80 90 100 110 120
Temperature (°C)
Figure 3. Mounting Hardware
Jam Nut
Mounting Nut
Lock Washer
O-Ring
7,94 mm [5/16 in] across flats
3,97 mm [5/32 in] thick
1/4 x 32 thread
7,94 mm [5/16 in] across flats
10,32 mm [5/16 in] outside
diameter 0,64 mm [0.025 in] thick
6,35 mm [0.25 in] outside diameter
1,78 mm [0.070 in] thick
Sensing and Productivity Solutions
6
General Configuration Guide
Figure 4. General Configuration Guide
This figure shows possible configurations. Not all combinations may be available, please contact Honeywell. See the Order Guides for each series on
subsequent pages for currently available catalog listings.
Resistance
Number
of Zeros
that
Follow
Anti-Rotation
(AR)
Locating Pin
Signifi-
cant
Digit
Shaft
Length
Shaft
Type
Termination
Type
Product
Series
Bushing
Type and Length
Electrical
Taper
Switch
380 Series,
RV4 Series,
485 Series,
53C Series,
385 Series
2 W
Conductive
Plastic
Potentiometers
9,53 mm [0.325]1
12,7 mm [0.50 in]1
15,88 mm [0.625 in]
19,05 mm [0.75 in]
22,23 mm [0.875 in]
31,75 mm [1.25 in]
50,8 mm [2.00 in]
63,5 mm [2.50 in]
Custom
3/8-32 NEF-2A:
Standard:
10 Ohm
15 Ohm
20 Ohm
25 Ohm
50 Ohm
0
1
2
3
4
5
Linear:
2.5% to 97.5%
None ø3,18 mm [0.125 in]:
No locating pins
Solder
lug
Flatted
6,35 mm [0.25 in]
5% to 95%
7. 5% to 92.5%
10% to 90%
15% to 95%
25% to 75%
35% to 65%
37.5% to 82.5%
42.5% to 57.5%
45% to 55%
One locating pin:
9 o’ clock
Solder
lug with
center tap
Round
Slotted
7,92 mm [0.312 in]
8,69 mm [0.342 in]
9,27 mm [0.365 in]
9,53 mm [0.375 in]
3 o’ clock
PC pin
1Applies to 6,25 mm [0.25 in]
bushings only.
Two locating pins
5% to 50%;
50% to 90%
Straight Knurled
Fast-on
10% to 40%;
57.5% to 82.5%
Custom
10% to 45%;
55% to 90%
Custom
10% to 45%;
55% to 90%
Custom
35% to 45%;
55% to 65%;
45% to 57.5%;
52.5% to 55%;
5% to 40%;
45% to 52.5%;
60% to 95%
General 380 Series, RV4 Series, 485 Series,
53C Series, 385 Series Terminology
12,7 mm [0.500 in]
Log
Jam nut
Reverse Log
Custom
Mounting nut
High Torque:
12,7 mm [0.500 in]
Mounting
hardware
Lock washer
O-ring
Custom
Locating pin
Shaft
Bushing
Termination
Sensing and Productivity Solutions
7
380 Series Specific Configurations
Table 5. 380 Series Specific Configurations
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Shaft
Type
Shaft
Type
380-A (See Table 380-A on p. 9.)
380-B (See Table 380-B on p. 10.)
standard,
solder
standard,
solder
flatted 9,53 mm
[0.375 in]
1
slotted 9,53 mm
[0.375 in]
2
lug
lug
380-C (See Table 380-C on p. 10.)
380-D (See Table 380-D on p. 11.)
standard,
flatted 9,53 mm
[0.375 in]
standard,
solder
1
PC pin
round 9,53 mm
[0.375 in]
1
lug
380-E (See Table 380-E on p. 12.)
380-F (See Table 380-F on p. 13.)
high
standard,
solder
torque,
12,7 mm
[0.500 in]
solder
lug
slotted
1
slotted 9,53 mm
[0.375 in]
1
lug
380-G (See Table 380-G on p. 14.)
380-H (See Table 380-H on p. 14.)
standard,
solder
standard,
slotted 9,53 mm
[0.375] in
slotted 9,53 mm
[0.375] in
1
1
fast-on
lug
380-I (See Table 380-I on p. 15.)
standard,
solder
slotted 9,53 mm
[0.375] in
2
lug
Sensing and Productivity Solutions
8
380 Series Order Guides
Table 380-A Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
7,95
5,54 19,46 9,53
380000M8629
380000M8630 2.5 k
380000M8643 1 k
1 k
10
10
10
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
274
274
274
274
274
274
274
274
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
no
no
yes
yes
yes
yes
no
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
[7-28] [1.4]
[0.313] [0.218] [0.766] [0.375]
1-4
[7-28] [1.4]
12
7,95
5,54 19,46 9,53
[0.313] [0.218] [0.766] [0.375]
1-4 12
14,30 5,54
[0.563] [0.218] [1.000] [0.375]
25,4 9,53
no
[7-28] [1.4]
1-4 12
7,95 5,54 19,46 9,53
380000M8682 50 k
no
[7-28] [1.4]
[0.313] [0.218] [0.766] [0.375]
7,95 5,54 22,23 9,53
6
12
1,2
380017M0007
500
yes
yes
yes
yes
[7-42] [1.4]
[0.313] [0.218] [0.875] [0.375]
6
12
7,95 5,54 19,05 9,53
380017M8606 10 k
380017M87681 25 k
yes
yes
yes
[7-42] [1.4]
[0.313] [0.218] [0.750] [0.375]
7,95 5,54 19,05 9,53
6
12
[7-42] [1.4]
[0.313] [0.218] [0.750] [0.375]
6
12
7,95 5,54 19,05 9,53
[0.313] [0.218] [0.750] [0.375]
380017M95501
5 k
[7-42] [1.4]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
[0.563]
ø27,79 Max.
D
[1.094]
2,77
[0.109]
A
13,49
[0.531]
3,18
[0.125]
B
Locating
pin
12,87
[0.546]
ø6,35
[0.250]
3X 1,57
[0.062]
22,25 Max.
[0.875]
3/8-32 NEF-2A
Mounting surface
Terminal
base
90°
0,635
[0.025]
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
3
2
3,18 Min.
[0.125]
Right
Center
3X 1,57
[0.062]
2X 20°
1Supplied with nickel-plated, phosphor bronze lock washer.
2Supplied with two mounting nuts.
Sensing and Productivity Solutions
9
380 Series Order Guides
Table 380-B Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-6
12
7.95
5,54 19,05 9,53
3800017M8956 10 k
10
4
4
274
312 S-4 312
yes
yes
unassembled
[7-42] [1.4]
[0.313] [0.218] [0.750] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
ø27,79 Max.
[0.563]
[1.094]
D
2,77
[0.109]
13,49
[0.531]
A
2X 3,18
[0.125]
B
Locating
pin
12,87
[0.546]
ø6,35
[0.250]
22,25 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
Mounting surface
Terminal
base
90°
0,635
[0.025]
3
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
Right
Center
2
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Table 380-C Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-6
12
9,53 5,54 22,23 9,27
[0.375] [0.218] [0.875] [0.365]
380096M9088 10 k
10
4
4
288
312 S-2 312
yes
yes
none
[7-42] [1.4]
Dimensional Drawings (For reference only: mm [in].)
14,30
[0.563]
Shown with 50% shaft rotation
C
ø27,79 Max.
D
[1.094]
2,77
[0.109]
A
13,49
[0.531]
3,18
[0.125]
B
Locating
pin
13,87
[0.546]
ø6,35
[0.250]
32,77 Max.
[1.290]
Terminal
base
90°
3/8-32 NEF-2A
Mounting surface
3
1
Left
2X 5,08
[0.200]
0,635
[0.025]
2
3X 1,57
[0.062]
3X 1,02
[0.040]
Right
3,18 Min.
[0.125]
Center
Sensing and Productivity Solutions
10
380 Series Order Guides
Table 380-D Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
1-4
12
50,8
9,53
380C1100
380C11000
380C1100K
380C110K
380C11MEG
380C12000
380C120K
380C1250
380C12500
380C125K
380C135K
380C1500
380C15000
380C1500K
380C150K
100
1000
100 k
10 k
1 M
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
4
4
4
4
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
yes
yes
yes
yes
yes
yes
no
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
[7-28] [1.4]
[2.000])
[0.375]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
50,8
[2.000]
9,53
[0.375]
50,8
[2.000]
9,53
[0.375]
4
4
50,8
[2.000]
9,53
[0.375]
4
4
50,8
[2.000]
9,53
[0.375]
10
4
10
4
50,8
[2.000]
9,53
[0.375]
2 k
50,8
[2.000]
9,53
[0.375]
20 k
250
4
4
50,8
[2.000]
9,53
[0.375]
4
4
yes
yes
yes
yes
yes
yes
yes
yes
50,8
[2.000]
9,53
[0.375]
2.5 k
25 k
35 k
500
4
4
50,8
[2.000]
9,53
[0.375]
4
4
50,8
[2.000]
9,53
[0.375]
4
4
50,8
[2.000]
9,53
[0.375]
4
4
50,8
[2.000]
9,53
[0.375]
5 k
4
4
50,8
[2.000]
9,53
[0.375]
500 k
50 k
10
4
10
4
50,8
[2.000]
9,53
[0.375]
Dimensional Drawings (For reference only: mm [in].)
14,30
[0.563]
Shown wiøth257,07%9 Mshaaxf.t rotation
A
B
[1.094]
2,77
[0.109]
13,49
[0.531]
3,18
[0.125]
Locating
pin
12,87
[0.546]
ø6,35
[0.250]
22,25 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
Terminal
base
Mounting surface
3
3X 2,36
[0.093]
3X 3,15
[0.124]
0,635
1
Left
Right
2
[0.025]
3,18 Min.
[0.125]
Center
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
11
380 Series Order Guides
Table 380-E Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19 15,88 12,7
380C2000
380C210K
380C225K
380C25000
1 k
10 k
25 k
5 k
10
10
10
10
4
4
4
4
4
4
4
4
274
274
274
274
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
no
no
no
no
yes
yes
yes
yes
unassembled
unassembled
unassembled
unassembled
[7-28] [1.4]
[0.063] [0.047] [0.625] [0.500]
1-4 12
[7-28 [1.4]
1-4 12
[7-28] [1.4]
1,60
1,19 15,88 12,7
[0.063] [0.047] [0.625] [0.500]
1,60 1,19 15,88 12,7
[0.063] [0.047] [0.625] [0.500]
1,60 1,19 15,88 12,7
[0.063] [0.047] [0.625] [0.500]
1-4
[7-28 [1.4]
12
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
[0.563]
C
ø27,79 Max.
D
[1.094]
90°
2,77
[0.109]
A
13,49
[0.531]
3,18
[0.125]
Locating
pin
12,87
ø6,35
[0.546]
[0.250]
3X 1,57
[0.062]
B
22,25 Max.
[0.875]
3/8-32 NEF-2A
Terminal
base
Mounting surface
3X 2,36
1
Left
3
0,635
[0.025]
[0.093]
2
Right
3X 3,15
[0.124]
3,18 Min.
[0.125]
Center
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
12
380 Series Order Guides
Table 380-F Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19 22,23 9,53
380C3100
380C31000
380C3100K
380C310K
380C31MEG
380C32000
380C3200K
380C3250
100
1 k
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
4
4
4
4
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
yes
yes
yes
yes
yes
yes
no
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
[7-28] [1.4]
[0.063] [0.047] [0.875] [0.375]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1-4 12
[7-28] [1.4]
1,60
1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
100 k
10 k
1 M
4
4
4
4
10
4
10
4
2 k
200 k
250
4
4
4
4
no
380C32500
380C3250K
380C325K
380C3500
380C35000
380C3500K
380C350K
2.5 k
250 k
25 k
500
4
4
yes
yes
yes
yes
yes
yes
yes
10
4
10
4
4
4
5 k
4
4
500 k
50 k
10
4
10
4
1-4
[7-28] [1.4]
12
1,60
1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
[0.563]
C
ø27,79 Max.
[1.094]
D
90°
13,49
[0.531]
A
3,18
[0.125]
Locating
pin
12,87
[0.546]
ø27,79
[0.250]
B
22,25 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
Mounting surface
Terminal
base
1
Left
3
0,635
[0.025]
3X 2,36
[0.093]
3X 3,15
[0.124]
2
Right
3,18 Min.
[0.125]
Center
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
13
380 Series Order Guides
Table 380-G Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-6
12
1,60
1,19 22,23 9,53
3800000748500058
500 k
10
10
5
10
10
274
274
312
312
Z
Z
312
312
no
yes
yes
unassembled
unassembled
[7-42] [1.4]
[0.063] [0.047] [0.875] [0.375]
1-6
[7-42] [1.4]
12
1,60
1,19 22,23 9,53
380101M96991,2 2.5 M
25
yes
[0.063] [0.047] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
[0.563]
C
ø27,79 Max.
D
[1.094]
90°
2,77
[0.109]
13,49
[0.531]
A
3,18
[0.125]
3X 1,57
[0.062]
Locating
pin
12,87
[0.546]
ø6,35
[0.250]
3X 2,36
[0.093]
3X 3,15
[0.124]
B
22,25 Max.
[0.875]
3/8-32 NEF-2A
Terminal
base
Mounting surface
1
Left
3
2
3X 1,57
[0.062]
Right
0,635
[0.025]
Center
2X 20°
3,18 Min.
[0.125]
1Supplied with stainless-steel shaft.
2Supplied with nickel-plated beryllium copper retaining ring.
Table 380-H Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
6-20
12
1,60
1,19 22,23 9,53
380099M9425
1 k
10
4
4
288
312 S-2 312
no
yes
unassembled
[42-141] [1.4]
[0.063] [0.047] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
[0.563]
C
ø27,79 Max.
D
[1.094]
90°
2,77
[0.109]
A
13,49
[0.531]
3,18
[0.125]
Locating
12,87
[0.546]
pin
ø6,35
3X 1,57
[0.062]
[0.250]
B
3X 1,27
[0.050]
27,38 Max.
[1.078]
3/8-32 NEF-2A
Terminal
base
Mounting surface
3X ø1,14
3X 1,73
[0.068]
[0.045]
1
Left
3
2
Right
3X 3,96
[0.156]
3X 2,79
[0.110]
0,56
[0.022]
Center
3,18 Min.
[0.125]
2X 20°
Sensing and Productivity Solutions
14
380 Series Order Guides
Table 380-I Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19 22,23 9,53
380036M7444
1 k
10
4
4
310
344 S-3 360
no
yes
unassembled
[7-28] [1.4]
[0.063] [0.047] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
[0.563]
C
ø27,79 Max.
D
[1.094]
90°
2,77
[0.109]
A
13,49
[0.531]
3,18
[0.125]
Locating
pin
12,87
[0.546]
ø6,35
[0.250]
B
22,25 Max.
[0.875]
3/8-32 NEF-2A
Mounting surface
3X 1,57
Terminal
[0.062]
base
3
1
Left
3X 2,36
Right
0,635
[0.025]
2
[0.093]
Center
3,18 Min.
[0.125]
3X 3,15
[0.124]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
15
RV4 Series Specific Configurations
Table 6. RV4 Series Specific Configurations
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Shaft
Type
Shaft
Type
RV4-A (See Table RV4-A on p. 17.)
RV4-B (See Table RV4-B on p. 18.)
high
standard,
solder
torque,
12,7 mm
[0ꢀ500 in]
solder
lug
slotted
1
slotted 9,53 mm
[0ꢀ375 in]
1
lug
Sensing and Productivity Solutions
16
RV4 Series Order Guides
Table RV4-A Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-6
12
22,23
12,7
RV4LAYSD102A
RV4LAYSD103A
1 k
10
10
10
10
10
4
4
4
4
274
274
274
274
274
312
312
312
312
312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
no
no
no
no
no
no
no
no
no
no
unassembled
unassembled
unassembled
unassembled
unassembled
[7-42] [1.4]
[0.875]
[0.500]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
22,23
[0.875]
12,7
[0.500]
10 k
22,23
[0.875]
12,7
[0.500]
RV4LAYSD104A 100 k
RV4LAYSD502A 5 k
RV4LAYSD504A 500 k
4
4
22,23
[0.875]
12,7
[0.500]
4
4
22,23
[0.875]
12,7
[0.500]
10
10
Dimensional Drawings (For reference only: mm [in].)
14,30
Shown with 50% shaft rotation
A
[0.563]
ø27,79 Max.
[1.094]
B
13,49
2,77
[0.109]
[0.531]
11,9
1,6
[0.063]
[0.047]
3,18
[0.125]
ø12,7
[0.500]
12,87
[0.546]
ø6,35
Locating
pin
[0.250]
22,23 Max.
3X 1,57
[0.062]
[0.875]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
1
Left
3X 2,36
[0.093]
3X 3,15
[0.124]
Right
2
0,64
[0.025]
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
17
RV4 Series Order Guides
Table RV4-B Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-6
12
12,7
9,53
RV4NAYSB101A
RV4NAYSB103A
RV4NAYSB503A
RV4NAYSK103A
RV4NAYSK502A
RV4SAYSD502A
RV4NAYSD503D
100
10 k
50 k
10 k
5 k
10
10
10
10
10
10
20
4
4
4
4
4
4
4
-
274
274
274
274
274
274
274
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
yes
yes
yes
yes
yes
yes
yes
no
no
no
no
no
no
no
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
[7-42] [1.4]
[0.500]
[0.375]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
12,7
[0.500]
9,53
[0.375]
12,7
[0.500]
9,53
[0.375]
4
63,5
[2.500]
9,53
[0.375]
4
63.5
[2.5,0]
9,53
[0.375]
4
22,23
[0.875]
9,53
[0.375]
5
-
1-6
[7-42] [1.4]
12
22,23
[0.875]
9,53
[0.375]
50 k
500
4
312
Z
312
Dimensional Drawings (For reference only: mm [in].)
14,30
[0.563]
A
Shown with 50% shaft rotation
ø27,79 Max.
B
[1.094]
13,49
[0.531]
2,77
[0.109]
12,87
[0.546]
ø6,35
Locating
pin
[0.250]
22,23 Max.
3X 1,57
[0.062]
[0.875]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
Right
0,64
[0.025]
2
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
18
485 Series Specific Configurations
Table 7. 485 Series Specific Configurations
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Shaft
Type
Shaft
Type
485-A (See Table 485-A on p. 22)
485-B (See Table 485-B on p. 22.)
solder
standard,
standard,
solder
lug with
flatted 9,53 mm
[0.375 in]
1
flatted 9,53 mm
[0.375 in]
1
lug
center
tap
485-C (See Table 485-C on p. 23.)
485-D (See Table 485-D on p. 23.)
standard,
round 6,35 mm
[0.250 in]
solder
lug with
center tap
standard,
solder
1
round 9,53 mm
[0.375 in]
1
lug
485-E (See Table 485-E on p. 24.)
485-F (See Table 485-F on p. 24.)
standard,
solder
standard,
solder
round 9,53 mm
[0.375 in]
1
round 9,53 mm
[0.375 in]
1
lug
lug
485-G (See Table 485-G on p. 25.)
485-H (See Table 485-H on p. 25.)
solder
standard,
standard,
solder
lug with
round 9,53 mm
[0.375 in]
1
slotted 9,53 mm
[0.375 in]
1
lug
center
tap
Sensing and Productivity Solutions
19
485 Series Specific Configurations
Table 7. 485 Series Specific Configurations (continued)
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Shaft
Type
Shaft
Type
485-I (See Table 485-I on p. 26.)
485-J (See Table 485-J on p. 26.)
standard,
6,35 mm
[0.250 in]
and
9,53 mm
[0.375 in]
standard,
solder
solder
lug
slotted
1
slotted 8,69 mm
[0.342 in]
0
lug
485-K (See Table 485-K on p. 27.)
485-L (See Table 485-L on p. 27.)
standard,
solder
standard,
solder
slotted 9,53 mm
[0.375 in]
1
slotted 9,53 mm
[0.375 in]
1
lug
lug
485-M (See Table 485-M on p. 28.)
485-N (See Table 485-N on p. 28.)
standard,
9,53 mm
[0.375 in]
and
12,7 mm
[0.500 in]
standard,
solder
solder
lug
slotted 7,9 mm
[0.312 in]
1
slotted
1
lug
485-O (See Table 485-O on p. 29.)
485-P (See Table 485-P on p. 29.)
standard,
solder
standard,
solder
slotted 12,7 mm
[0.500 in]
1
slotted 9,53 mm
[0.375 in]
1
lug
lug
Sensing and Productivity Solutions
20
485 Series Specific Configurations
Table 7. 485 Series Specific Configurations (continued)
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Shaft
Type
Shaft
Type
485-Q (See Table 485-Q on p. 30.)
485-R (See Table 485-R on p. 30.)
solder
standard,
lug
standard,
solder
slotted 9,53 mm
[0.375 in]
1
round 9,53 mm
[0.375 in]
1
with
center tap
lug
485-S (See Table 485-S on p. 31.)
485-T (See Table 485-T on p. 31)
standard,
solder
standard,
8,67 mm
[0.342 in]
straight
knurled
solder
lug
slotted 12,7 mm
[0ꢀ500 in]
1
1
lug
Sensing and Productivity Solutions
21
485 Series Order Guides
Table 485-A Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
11,13
5,54
22,23
9,53
485000M8990
5 k
10
4
4
112
312 S-7 312
no
yes
unassembled
[7-28] [1-4]
[0.438] [0.218] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
ø27,79 Max.
[0.563]
[1.094]
D
2,77
[0.109]
13,49
[0.531]
A
3,18
[0.125]
12,87
[0.546]
ø6,35
[0.250]
Locating
pin
22,23 Max.
[0.875]
B
3X 1,57
[0.062]
90°
3/8-32 NEF-2A
Terminal
base
3
Mounting surface
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
0,635
[0.025]
Right
2
3,18 Min.
[0.125]
Center
3X 1,57
[0.062]
2X 20°
Table 485-B Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
11,13
5,54
22,23
9,53
485025M9052
10 k
10
4
4
112
312 S-9 312 S-14
12 no
yes
unassembled
[0.438] [0.218] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
[0.563]
ø27,79 Max.
D
[1.094]
2,77
[0.109]
13,49
[0.531]
A
22,23 Max.
[0.875]
3,18
[0.125]
12,87
[0.546]
ø6,35
[0.250]
B
Locating
pin
4X 1,57
[0.062]
Terminal
base
22,23 Max.
[0.875]
90°
3/8-32 NEF-2A
3
4X 2,36
[0.093]
4X 3,15
[0.124]
0,635
[0.025]
Mounting surface
1
Left
Right
2
Center
3,18 Min.
[0.125]
4X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
22
485 Series Order Guides
Table 485-C Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-4
12
15,88
6,35
485025M8843
485025M9267
10 k
5 k
10
10
4
4
4
4
112
112
312 S-13 312
312 S-13 312
no
no
yes
yes
unassembled
unassembled
[7-28] [1.4]
[0.625]
[0.250]
1-4 12
[7-28] [1.4]
15,88
[0.625]
6,35
[0.250]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
[0.563]
A
ø27,79 Max.
[1.094]
B
13,49
[0.531]
2,77
[0.109]
22,23 Max.
[0.875]
3,18
[0.125]
12,87
[0.546]
ø6,35
[0.250]
Locating
pin
4X 1,57
22,23 Max.
[0.875]
[0.062]
3/8-32 NEF-2A
Terminal
base
1
Left
3
4X 2,36
[0.093]
4X 3,15
[0.124]
0,635
[0.025]
Mounting surface
2
Right
Center
3,18 Min.
[0.125]
4X 1,57
[0.062]
2X 20°
Table 485-D Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-6
12
22,23
[0.875]
9,53
[0.375]
485008M7167
5 k
10
4
4
284
312 S-4 312
yes
yes
unassembled
[7-42] [1.4]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
A
[0.563]
ø27,79 Max.
[1.094]
B
2,77
[0.109]
13,49
[0.531]
3,18
[0.125]
12,87
[0.546]
ø6,32
Locating
pin
[0.249]
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
Terminal
base
3
1
Left
Mounting surface
3X 2,36
[0.093]
3X 3,15
[0.124]
2
0,635
[0.025]
Right
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
23
485 Series Order Guides
Table 485-E Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-4
12
50,8
[2.000]
9,53
[0.375]
485000M8930
5 k
10
4
4
284
312 S-16 312
no
yes
unassembled
[7-28] [1.4]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
A
[0.563]
ø27,79 Max.
B
[1.094]
2,77
[0.109]
13,49
[0.531]
3,18
[0.125]
3X 1,57
[0.062]
12,87
[0.546]
ø6,35
[0.25]
Locating
pin
3X 2,36
[0.093]
3X 3,15
[0.124]
22,23 Max.
[0.875]
3/8-32 NEF-2A
Mounting surface
Terminal
base
3
1
Left
3X 1,57
[0.062]
2
0,635
[0.025]
Right
Center
3,18 Min.
[0.125]
2X 20°
Table 485-F Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-4
12
31,75
[1.250]
9,53
[0.375]
485000M9156
10 k
10
4
100
284
312 S-11 312
no
yes
unassembled
[7-28] [1.4]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
A
ø27,79 Max.
[0.563]
[1.094]
B
13,49
[0.531]
2,77
[0.109]
3,18
[0.125]
12,87
[0.546]
ø6,35
[0.250]
Locating
3X 1,57
[0.062]
pin
22,23 Max.
[0.875]
3/8-32 NEF-2A
Terminal
base
3
1
Left
Mounting surface
3X 2,36
[0.093]
3X 3,15
[0.124]
2
0,635
[0.025]
Right
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
24
485 Series Order Guides
Table 485-G Order Guide
Electrical
Mechanical
Dimensions
A
B
Mounting
Hardware
8.5
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-4
-
76,2
[3.000]
9,53
[0.375]
485004M8986
25 k
10
4
4
180
348 S-6 360
no
yes
unassembled
[7-28]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
ø27,79 Max.
14,30
A
[0.563]
[1.094]
B
13,49
[0.531]
2,77
[0.109]
ø1,58
[0.062]
Locating
pin
12,87
2,39
[0.094]
3,18
[0.125]
[0.546]
3X 1,57
[0.062]
ø6,32
[0.249]
22,23 Max.
[0.875]
3/8-32 NEF-2A
Terminal
base
Mounting surface
1
Left
3
3X 2,36
[0.093]
3X 3,15
[0.124]
2
0,635
[0.025]
Right
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Table 485-H Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-6
12
1,60
1,19
22,23
9,53
485025M9428
485042M9576
10 k
1 k
10
10
4
4
4
4
263
263
312 S-8 312
312 S-8 312
no
no
yes
yes
unassembled
unassembled
[7-42] [1.4]
[0.063] [0.047] [0.875] [0.375]
1-6
[7-42] [1.4]
12
1,60
1,19
22,23
9,53
[0.063] [0.047] [0.875] [0.375]
Shown with 50% shaft rotation
Dimensional Drawings (For reference only: mm [in].)
14,30
C
[0.563]
ø27,79 Max.
[1.094]
D
2,77
[0.109]
13,49
[0.531]
A
22,23 Max.
[0.875]
3,18
[0.125]
B
12,87
[0.546]
Locating
ø6,35
pin
[0.250]
3X 1,57
[0.062]
22,23 Max.
[0.875]
90°
3/8-32 NEF-2A
Terminal
base
3
4X 2,36
[0.093]
4X 3,15
[0.124]
0,635
[0.025]
Mounting surface
1
Left
Right
2
3,18 Min.
[0.125]
Center
4X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
25
485 Series Order Guides
Table 485-I Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1,19
22,23
9,53
1-4
12
1,60
485000M8723
485000M9564
485000M9641
485000M9708
5 k
50 k
10 k
1 k
10
10
10
10
4
4
4
4
4
4
4
4
284
284
284
284
312 S-9 312
312 S-9 312
312 S-9 312
312 S-9 312
no
no
no
no
yes
yes
yes
yes
unassembled
unassembled
unassembled
unassembled
[1-28] [1.4]
[0.063]
[0.047] [0.875] [0.375]
1,19
[0.047] [0.875] [0.75]
1,19 22,23 9,53
[0.047] [0.875] [0.375]
22,23
9,53
1-4 12
[1-28] [1.4]
1-4 12
[1-28] [1.4]
1,60
[0.063]
1,60
[0.063]
1,19
15,88
6,35
1-4
12
1,60
[1-28] [1.4]
[0.063]
[0.047] [0.625] [0.250]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
ø27,79 Max.
C
[0.563]
[1.094]
D
13,49
[0.531]
B
2,77
[0.109]
A
3,18
[0.125]
12,87
[0.546]
ø6,35
Locating
[0.250]
3X 1,57
pin
22,23 Max.
[0.875]
[0.062]
90°
3/8-32 NEF-2A
Terminal
base
3
1
Left
Mounting surface
3X 2,36
[0.093]
3X 3,15
[0.124]
0,635
[0.025]
2
Right
3,18 Min.
[0.125]
Center
3X 1,57
[0.062]
2X 20°
Table 485-J Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19
50,8
9,53
485000M9017
1 M
10
10
10
284
312 S-4 312
no
yes
unassembled
[1-28] [1.4]
[0.063] [0.047] [2.000] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
ø27,79 Max.
[0.563]
[1.094]
D
13,49
[0.531]
B
2,77
[0.109]
A
3,18
[0.125]
12,87
[0.546]
ø6,35
[0.250]
3X 1,57
[0.062]
22,23 Max.
[0.875]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
0,635
[0.025]
Right
2
3,18 Min.
[0.125]
Center
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
26
485 Series Order Guides
Table 485-K Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-6
12
1,60
1,19
22,23
9,53
485042M9668
10 k
10
4
100
284
311 S-7 312
yes
yes
unassembled
[7-42] [1.4]
[0.063] [0.047] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
ø27,79 Max.
[0.563]
[1.094]
D
13,49
[0.531]
B
2,77
[0.109]
A
3,18
[0.125]
12,87
[0.546]
ø6,35
[0.250]
Locating
3X 1,57
[0.062]
22,23 Max.
[0.875]
pin
3/8-32 NEF-2A
90°
Terminal
base
3
Mounting surface
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
0,635
[0.025]
Right
2
3,18 Min.
[0.125]
Center
3X 1,57
[0.062]
2X 20°
Table 485-L Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19
22,23
9,53
485000M8911
1 M
10
10
10
304
312 S-2 312
no
yes
unassembled
[7-28] [1.4]
[0.063] [0.047] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
ø27,79 Max.
[0.563]
[1.094]
D
13,49
[0.531]
2,77
[0.109]
A
B
ø6,35
3,18
[0.125]
[0.250]
12,87
[0.546]
3/8-32 NEF-2A
Mounting surface
Locating
22,23 Max.
[0.875]
3X 1,57
[0.062]
pin
90°
Terminal
base
3
1
Left
3X 2,36
[0.093]
3X 3,15
[0.124]
0,635
[0.025]
Right
2
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
27
485 Series Order Guides
Table 485-M Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19
27,19
7,92
485010M6860
5 k
10
4
4
33
312 S-9 312
no
yes
unassembled
[7-28] [1.4]
[0.063] [0.047] [1.031] [0.312]
Shown with 50% shaft rotation
Dimensional Drawings (For reference only: mm [in].)
14,30
[0.563]
C
ø27,79 Max.
D
[1.094]
13,49
[0.531]
2,77
[0.109]
A
B
3,18
[0.125]
12,87
[0.546]
ø6,35
[0.250]
Locating
22,23 Max.
[0.875]
pin
3X 1,57
[0.062]
90°
3/8-32 NEF-2A
Terminal
base
Mounting surface
3
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
0,635
[0.025]
Right
2
3,18 Min.
Center
[0.125]
3X 1,57
[0.062]
2X 20°
Table 485-N Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-6
12
1,60
1,19
20,62
12,7
485000M8990
485008M0002
485008M8967
485008M9458
485008M9687
485008M9688
5 k
5 k
5 k
5 k
5 k
5 k
10
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
4
4
45
45
45
45
45
45
312 S-10 312
312 S-10 312
312 S-10 312
312 S-10 312
yes
yes
yes
yes
yes
yes
yes
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
[7-42] [1.4]
[0.063] [0.047] [0.182] [0.500]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1,60
1,19
50,8
12,7
no
[0.063] [0.047] [2.000] [0.500]
1,60 1,19 50,8 12,7
[0.063] [0.047] [2.000] [0.500]
1,60 1,19 50,8 9,53
[0.063] [0.047] [2.000] [0.375]
1,60 1,19 47,63 9,53
[0.063] [0.047] [1.875] [0.375]
yes
yes
yes
yes
312 S-10 312
312 S-A 312
14,30
1-6
12
1,60
1,19
39,88
12,7
[7-42] [1.4]
[0.063] [0.047] [1.570] [0.500]
Shown wiøth257,07%9 Mshaaxf.t rotation
Dimensional Drawings (For reference only: mm [in].)
C
[0.563]
D
[1.094]
13,49
2,77
[0.109]
A
[0.531]
B
3,18
[0.125]
12,87
[0.546]
ø6,35
[0.250]
Locating
pin
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
0,635
[0.025]
Right
2
3,18 Min.
[0.125]
Center
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
28
485 Series Order Guides
Table 485-O Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-6
12
1,60
1,19
25,4
12,7
485008M0004
5 k
10
4
4
45
312 S-10 312
yes
no
unassembled
[7-42] [1.4]
[0.063] [0.047] [1.000] [0.500]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
ø27,79 Max.
C
[0.563]
[1.094]
D
13,49
[0.531]
B
2,77
[0.109]
A
3,18
[0.125]
12,87
[0.546]
ø6,35
[0.250]
Locating
pin
3X 1,57
[0.062]
22,23 Max.
[0.875]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
0,635
[0.025]
Right
2
3,18 Min.
[0.125]
Center
3X 1,57
[0.062]
2X 20°
Table 485-P Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19
50,8
9,53
485000M9651
20 k
10
4
4
46
312 S-10 312
no
yes
unassembled
[7-28] [1.4]
[0.063] [0.047] [2.000] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
ø27,79 Max.
[0.563]
[1.094]
D
13,49
2,77
[0.109]
[0.531]
A
B
3,18
[0.125]
12,87
[0.546]
ø6,35
Locating
pin
[0.250]
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
3X 2,36
[0.093]
3X 3,15
[0.124]
0,635
[0.025]
1
Left
Right
Center
2
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
29
485 Series Order Guides
Table 485-Q Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1,60
1,19
50,8
9,53
485030M9652
10 k
10
4
4
270
348 S-12 360
1-4
-
no
yes
unassembled
[0.063] [0.047] [2.000] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
ø27,79 Max.
C
[0.563]
[1.094]
D
13,49
[0.531]
B
2,77
[0.109]
A
22,56 Max.
[0.888]
3,18
[0.125]
12,87
[0.546]
Locating
pin
ø6,35
[0.250]
3/8-32 NEF-2A
22,23 Max.
[0.875]
4X 1,57
[0.062]
90°
Mounting surface
Terminal
base
3
4X 2,36
[0.093]
4X 3,15
[0.124]
1
Left
0,635
[0.025]
Right
2
3,18 Min.
[0.125]
Center
4X 1,57
[0.062]
Table 485-R Series Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
63,5
[2.500]
9,53
[0.375]
485040M9512
1 k
10
4
4
250
312 S-5 312
1-4
12 no
yes
unassembled
Dimensional Drawings (For reference only: mm [in].)
14,30
[0.563]
D
Shown with 50% shaft rotation
C
ø27,79 Max.
[1.094]
49,40
[1.945]
13,49
[0.531]
2,77
[0.109]
ø2,36
[0.093]
5,70
[0.226]
3,18
[0.125]
12,87
[0.546]
Locating
12,7
12,7
22,23 Max.
[0.875]
pin
3X 1,57
[0.062]
3/8-32 NEF-2A
[0.125] [0.125]
ø6,35
[0.250]
Mounting surface
Terminal
base
1
Left
3
3X 2,36
[0.093]
3X 3,15
[0.124]
2
0,635
[0.025]
Right
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
30
485 Series Order Guides
Table 485-S Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
0,23
1,19
25,15
12,7
485048M9728
5 k
5
4
4
45
312 S-15 312
1-6
12 yes
no
unassembled
[0.009] [0.047] [0.990] [0.500]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
ø27,79 Max.
C
[0.563]
[1.094]
D
13,49
[0.531]
B
2,77
[0.109]
A
7,32
[0.288]
3,18
[0.125]
5,64
[0.222]
12,87
[0.546]
ø6,35
Locating
[0.250]
pin
3X 1,57
[0.062]
22,23 Max.
[0.875]
3/8-32 NEF-2A
Mounting surface
90°
Terminal
base
3
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
0,635
[0.025]
2
Right
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Table 485-T Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
19,05
[0.750]
8,69
[0.342]
485022M8995
20 k
10
4
4
158
348 S-8 360
1-4
-
no
yes
unassembled
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
A
ø27,79 Max.
[0.563]
[1.094]
B
13,49
[0.531]
2,77
[0.109]
ø6,35
[0.250]
3,18
[0.125]
12,87
[0.546]
Locating
pin
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
Terminal
base
Mounting surface
3
1
Left
3X 2,36
0,635
[0.025]
2
Right
[0.093]
Center
3,18 Min.
[0.125]
3X 3,15
[0.124]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
31
53C Series Specific Configurations
Table 8. 53C Series Specific Configurations
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Shaft
Type
Shaft
Type
53C1 (See Table 53C1 on pp. 33-34.)
53C2 (See Table 53C2 on p. 35.)
high
standard,
solder
torque,
12,7 mm
[0.500 in]
solder
lug
round 9,53 mm
[0.375 in]
1
slotted
1
lug
53C3 (See Table 53C3 on pp. 36-37.)
standard,
solder
slotted 6,35 mm
[0.25 in]
1
lug
Sensing and Productivity Solutions
32
53C Series Order Guides
Table 53C1 Order Guide
Electrical
Mechanical
Dimensions
A
B
Mounting
Hardware
Catalog
Listing
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-6
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
(Continued on next page.)
12
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
50,80
[2.00]
9,53
53C1100
100
100 k
10 k
10 M
1.5 k
15 k
1 k
10
10
10
20
10
10
10
20
10
10
10
10
10
10
10
10
10
10
10
10
20
10
10
4
4
4
4
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
53C1100K
53C110K
53C110MEG
53C11500
53C115K
53C11K
4
4
10
4
10
4
4
4
4
4
53C11MEG
53C120K
53C1250
53C12500
53C1250K
53C125K
53C12K
1 M
10
4
10
4
20 k
250
4
4
2.5 k
250 k
25 k
2 k
4
4
10
4
10
4
4
4
53C135K
53C150
35 k
50 k
500
4
4
4
4
53C1500
53C1500K
53C150K
53C15K
4
4
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
500 k
50 k
5 k
10
4
10
4
4
4
53C15MEG
53C1SW100K
53C1SW10K
5 M
10
4
10
4
100 k
10 k
4
4
Sensing and Productivity Solutions
33
53C Series Order Guide
Table 53C1 Order Guide (continued)
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-6
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
12
50,8
9,53
53C1100KZ
53C110KZ
53C11MEGZ
53C1250KZ
53C125KZ
53C1500KZ
53C150KZ
53C15KZ
100 k
10 k
1 M
10
10
20
10
10
10
10
10
10
1 k
100
10 k
2.5 k
250
5 k
4
4
274
274
274
274
274
274
274
274
274
312
312
312
312
312
312
312
312
312
Z
Z
312
312
312
312
312
312
312
312
312
no
no
no
no
no
no
no
no
no
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
yes unassembled
[2.00]
[0.375]
50,8
[2.00]
50,8
[2.00]
50,8
[2.00]
50,8
[2.00]
50,8
[2.00]
50,8
[2.00]
50,8
[2.00]
50,8
[2.00]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
9,53
[0.375]
10
10
4
Z
250 k
25 k
500 k
50 k
5 k
Z
Z
10
4
Z
500
50
Z
4
Z
53C1-100K-RZ 100 k
1 k
4
RZ
Dimensional Drawings (For reference only: mm [in].)
14,30
[0.563]
A
Shown with 50% shaft rotation
B
ø27,79 Max.
[1.094]
2,77
[0.109]
13,49
[0.531]
3,18
[0.125]
ø12,7
[0.500]
12,87
[0.546]
Locating
3/8-32 NEF-2A
Mounting surface
ø6,35
[0.250]
pin
22,23 Max.
[0.875]
3X 1,57
[0.062]
Terminal
base
1
Left
3
3X 2,36
[0.093]
3X 3,15
[0.124]
2
0,64
[0.025]
Right
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
34
53C Series Order Guides
Table 53C2 Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm
Bushing
Length
(mm [in])
[in])
1-6
12
15,88
12,7
53C2100
100
100 k
10 k
1.5 k
150 k
15 k
1 k
10
10
10
10
10
10
10
10
20
10
10
10
10
10
10
20
20
10
10
10
10
10
20
4
4
4
4
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
S-4 312
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
[7-42] [1.4]
[0.625]
[0.500]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
15,88
12,7
53C2100K
53C210K
53C21500
53C2150K
53C215K
53C21K
[0.625]
[0.500]
15,88
12,7
4
4
[0.625]
[0.500]
15,88
12,7
4
4
[0.625]
[0.500]
15,88
12,7
4
4
[0.625]
[0.500]
15,88
12,7
4
4
[0.625]
[0.500]
15,88
12,7
4
4
[0.625]
[0.500]
15,88
12,7
53C21MEG
53C22.5MEG
53C220K
53C2250
53C22500
53C2250K
53C225K
53C22K
1 M
10
10
4
10
10
4
[0.625]
[0.500]
15,88
12,7
2.5 M
20 k
250
[0.625]
[0.500]
15,88
12,7
[0.625]
[0.500]
15,88
12,7
4
4
[0.625]
[0.500]
15,88
12,7
2.5 k
250 k
25 k
2 k
4
4
[0.625]
[0.500]
15,88
12,7
10
4
10
4
[0.625]
[0.500]
15,88
12,7
[0.625]
[0.500]
15,88
12,7
4
4
[0.625]
[0.500]
15,88
12,7
53C22MEG
53C23.5MEG
53C250
2 M
10
10
4
10
10
4
[0.625]
[0.500]
15,88
12,7
3.5 M
50
[0.625]
[0.500]
15,88
12,7
[0.625]
[0.500]
15,88
12,7
53C2500
53C2500K
53C250K
53C25K
500
4
4
[0.625]
[0.500]
15,88
12,7
500 k
50 k
5 k
10
4
10
4
[0.625]
[0.500]
15,88
12,7
[0.625]
[0.500]
15,88
12,7
4
4
[0.625]
[0.500]
15,88
12,7
53C25MEG
5 M
10
10
[0.625]
[0.500]
Dimensional Drawings (For reference only: mm [in].)
14,30
A
Shown wiøth257,07%9 Mshaaxf.t rotation
[0.563]
[1.094]
B
13,49
[0.531]
11,9
2,77
[0.109]
1,6
[0.063]
[0.047]
3,18
[0.125]
ø12,7
[0.500]
12,87
[0.546]
ø6,35
Locating
pin
[0.250]
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
Right
2
0,64
[0.025]
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
35
53C Series Order Guide
Table 53C3 Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-6
12
22,23
9,53
53C3100
100
100 k
10 k
150
10
10
10
10
10
10
10
10
10
10
20
10
10
10
10
10
10
10
20
10
10
10
10
10
10
10
4
4
4
4
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
274
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
no
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
unassembled
[7-42] [1.4]
[0.875]
[0.375]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
(Continued on next page.)
22,23
[0.875]
9,53
[0.375]
53C3100K
53C310K
53C3150
22,23
[0.875]
9,53
[0.375]
4
4
22,23
[0.875]
9,53
[0.375]
4
4
22,23
[0.875]
9,53
[0.375]
53C31500
53C3150K
53C315K
53C31K
1.5 k
150 K
15 k
1 k
4
4
22,23
[0.875]
9,53
[0.375]
4
4
22,23
[0.875]
9,53
[0.375]
4
4
22,23
[0.875]
9,53
[0.375]
4
4
22,23
[0.875]
9,53
[0.375]
53C31K/NEW
53C31MEG
53C32.5MEG
53C3200K
53C320K
53C3250
1 k
4
4
22,23
[0.875]
9,53
[0.375]
1 M
10
10
4
10
10
4
22,23
[0.875]
9,53
[0.375]
2.5 M
200 k
20 k
250
22,23
[0.875]
9,53
[0.375]
22,23
[0.875]
9,53
[0.375]
4
4
22,23
[0.875]
9,53
[0.375]
4
4
22,23
[0.875]
9,53
[0.375]
53C32500
53C3250K
53C325K
53C32K
2.5 k
250 k
25 k
2 k
4
4
22,23
[0.875]
9,53
[0.375]
10
4
10
4
22,23
[0.875]
9,53
[0.375]
22,23
[0.875]
9,53
[0.375]
4
4
22,23
[0.875]
9,53
[0.375]
53C32MEG
53C3350
53C33500
53C350
2 M
10
4
10
4
22,23
[0.875]
9,53
[0.375]
350
22,23
[0.875]
9,53
[0.375]
3.5 k
50
4
4
22,23
[0.875]
9,53
[0.375]
4
4
22,23
[0.875]
9,53
[0.375]
53C3500
53C3500K
500
4
4
22,23
[0.875]
9,53
[0.375]
500 k
10
10
4
10
10
4
22,23
[0.875]
9,53
[0.375]
53C3500K/NEW 500 k
53C350K 50 k
22,23
[0.875]
9,53
[0.375]
Sensing and Productivity Solutions
36
53C Series Order Guide
Table 53C3 Order Guide (continued)
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-6
12
22,23
9,53
53C35K
5 k
5 M
10
20
10
10
4
10
4
4
10
4
274
274
274
274
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
no
no
no
no
no
no
no
no
unassembled
unassembled
unassembled
unassembled
[7-42] [1.4]
[0.875]
[0.375]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
22,23
[0.875]
9,53
[0.375]
53C35MEG
53C3750K
53C375K
22,23
[0.875]
9,53
[0.375]
750 k
75 k
1-6
[7-42] [1.4]
12
22,23
[0.875]
9,53
[0.375]
4
4
Dimensional Drawings (For reference only: mm [in].)
14,30
A
[0.563]
B
Shown with 50% shaft rotation
ø27,79 Max.
[1.094]
13,49
[0.531]
2,77
[0.109]
12,87
[0.546]
ø6,35
Locating
pin
[0.250]
22,23 Max.
3X 1,57
[0.062]
[0.875]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
Right
0,64
[0.025]
2
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
37
385 Series Specific Configurations
Table 9. 385 Series Specific Configurations
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Shaft
Type
Shaft
Type
385-A (See Table 385-A on p. 40.)
385-B (See Table 385-B on p. 40.)
standard,
solder
standard,
solder
flatted 9,53 mm
[0.375 in]
1
round 9,53 mm
[0.375 in]
1
lug
lug
385-C (See Table 385-C on p. 41.)
385-D (See Table 385-D on p. 41.)
standard,
flatted 9,53 mm and
[0.375 in]
1
standard,
solder
solder
lug
slotted 9,53 mm
[0.375 in]
1
lug
2
385-E (See Table 385-E on p. 42.)
385-F (See Table 385-F on p. 42.)
high
high
torque,
12,7 mm
[0.500 in]
solder
lug
torque,
12,7 mm
[0.500 in]
solder
lug
slotted
1
slotted
1
385-G (See Table 385-G on p. 43.)
385-H (See Table 385-H on p. 43.)
high
standard,
torque,
12,7 mm
[0.500 in]
solder
lug
9,53 mm
[0.375 in]
solder
lug
slotted
1
slotted
1
Sensing and Productivity Solutions
38
385 Series Specific Configurations
Table 9. 385 Series Specific Configurations (continued)
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Bushing AR Termin-
Type Pin ation
Configuration with
Associated Hardware
Shaft
Type
Shaft
Type
385-I (See Table 385-I on p. 44.)
385-J (See Table 385-J on p. 45.)
standard,
solder
standard,
solder
slotted 9,53 mm
[0.375 in]
1
slotted 9,53 mm
[0.375 in]
1
lug
lug
385-K (See Table 385-K on p. 45.)
385-L (See Table 385-L on p. 46.)
standard,
solder
standard,
solder
slotted 9,53 mm
[0.375 in]
1
slotted 9,53 mm
[0.375 in]
1
lug
lug
Sensing and Productivity Solutions
39
385 Series Order Guides
Table 385-A Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
12
12,27
5,53
22,23
9,53
385000M5783
385000M9136
10 k
5 k
10
10
4
4
4
4
274
274
312 S-4 312
312 S-4 312
no
no
yes
yes
unassembled
unassembled
[7-28] [1.4]
[0.483] [0.218] [0.875] [0.375]
1-4
[7-28] [1.4]
9,53
3,96
22,23
9,53
[0.375] [0.156] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
14,30
[0.563]
C
Shown with 50% shaft rotation
ø27,79 Max.
D
[1.094]
13,49
[0.531]
2,77
[0.109]
A
3,18
[0.125]
12,87
[0.546]
ø6,35
Locating
pin
[0.250]
B
22,23 Max.
[0.875]
3X 1,57
[0.062]
90°
Terminal
base
3/8-32 NEF-2A
3
1
Left
3X 2,36
[0.093]
3X 3,15
[0.124]
0,635
[0.025]
2
Right
Mounting surface
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Table 385-B Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
[7-28] [1.4]
1-4 12
[7-28] [1.4]
12
9,53
5,53
22,23
9,53
385500M0012 100 k
10
10
10
4
4
4
4
4
4
274
274
274
312 S-4 312
312 S-4 312
312 S-4 312
no
no
no
no
no
no
unassembled
unassembled
unassembled
[0.375] [0.218] [0.875] [0.375]
9,53
5,53
22,23
9,53
385500M4863
385500M5694
1 k
5 k
[0.375] [0.218] [0.875] [0.375]
1-4
12
9,53
5,53
22,23
9,53
[7-28] [1.4]
[0.375] [0.218] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
14,30
[0.563]
C
Shown wiøth257,07%9 Mshaaxf.t rotation
D
[1.094]
2,77
[0.109]
13,49
[0.531]
A
3,18
[0.125]
ø6,35
12,87
[0.546]
[0.250]
Locating
pin
B
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
90°
Terminal
base
3
1
Left
Mounting surface
3X 2,36
[0.093]
3X 3,15
[0.124]
0,635
[0.025]
2
Right
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
40
385 Series Order Guides
Table 385-C Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Length
(mm [in])
Bushing
Length
(mm [in])
1-4
12
12
19,05
9,53
385000M8551
385000M9168
150
100
10
10
4
4
4
4
274
274
312 S-4 312
312 S-4 312
no
no
yes
yes
unassembled
unassembled
[7-28] [1.4]
[0.750]
[0.375]
1-4
[7-28] [1.4]
19,05
[0.750]
9,53
[0.375]
Dimensional Drawings (For reference only: mm [in].)
14,30
C
Shown with 50% shaft rotation
[0.563]
D
ø27,79 Max.
[1.094]
2,77
[0.109]
13,49
[0.531]
3,18
[0.125]
12,87
[0.546]
Locating
pin
ø6,35
[0.250]
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
Mounting surface
Terminal
base
1
Left
3
3X 2,36
[0.093]
3X 3,15
[0.124]
2
0,635
[0.025]
Right
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Table 385-D Order Guide
Electrical
Mechanical
Dimensions
A
B
Catalog
Listing
Mounting
Hardware
Shaft
Bushing
Length
(mm [in])
Length
(mm [in])
1-4
12
25,4
[1.000]
9,53
[0.375]
385000M8659
10 k
10
100
4
274
312
Z
312
no
yes
unassembled
[7-28] [1.4]
Dimensional Drawings (For reference only: mm [in].)
14,30
[0.563]
C
Shown with 50% shaft rotation
ø27,79 Max.
D
[1.094]
2,77
[0.109]
13,49
[0.531]
3,18
[0.125]
12,87
[0.546]
Locating
pin
ø6,35
[0.250]
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
Mounting surface
Terminal
base
1
Left
3
3X 2,36
[0.093]
3X 3,15
[0.124]
0,635
[0.025]
2
Right
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
41
385 Series Order Guides
Table 385-E Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19
15,88
12,7
385500M9303
75
10
4
4
274
312 S-4 312
no
yes
unassembled
[7-28] [1.4]
[0.063] [0.047] [0.625] [0.500]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
[0.563]
ø27,79 Max.
[1.094]
D
13,49
[0.531]
B
2,77
[0.109]
A
3,18
[0.125]
12,87
[0.546]
ø6,35
[0.250]
Locating
pin
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
1
Left
3X 2,36
[0.093]
3X 3,15
[0.124]
Right
0,635
[0.025]
2
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Table 385-F Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19
15,88
12,7
385500M1654
200
10
4
4
274
312 S-4 312
no
no
unassembled
[7-28] [1.4]
[0.063] [0.047] [0.625] [0.500]
Dimensional Drawings (For reference only: mm [in].)
14,30
Shown wiøth257,07%9 Mshaaxf.t rotation
C
[0.563]
[1.094]
D
13,49
[0.531]
B
2,77
[0.109]
A
3,18
[0.125]
12,87
[0.546]
Locating
pin
ø6,35
[0.250]
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
1
Left
3X 2,36
[0.093]
3X 3,15
[0.124]
Right
0,635
[0.025]
2
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
42
385 Series Order Guides
Table 385-G Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-6
24
1,60
1,19
15,88
12,7
385518M0018
5 k
10
4
4
274
312 S-4 312
yes
no
unassembled
[7-42] [2.8]
[0.063] [0.047] [0.625] [0.500]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
ø27,79 Max.
[0.563]
[1.094]
D
13,49
[0.531]
2,77
[0.109]
A
3,18
[0.125]
12,87
[0.546]
Locating
ø6,35
pin
[0.250]
22,23Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
90°
Terminal
base
3
3X 2,36
[0.093]
3X 3,15
[0.124]
Mounting surface
1
Left
0,635
[0.025]
Right
2
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Table 385-H Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19
15,88
9,53
385000M1495
385000M6960
5 M
270
10
10
4
4
4
4
274
274
312 S-4 312
312 S-4 312
no
no
yes
yes
unassembled
unassembled
[7-28] [1.4]
[0.063] [0.047] [0.625] [0.375]
1-4
[7-28] [1.4]
12
1,60
1,19
22,23
9,53
[0.063] [0.047] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
[0.563]
ø27,79 Max.
[1.094]
D
13,49
[0.531]
2,77
[0.109]
A
B
3,18
[0.125]
12,87
[0.546]
ø6,35
Locating
pin
[0.250]
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
1
Left
3X 2,36
[0.093]
3X 3,15
[0.124]
0,635
[0.025]
2
Right
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
43
385 Series Order Guides
Table 385-I Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19
22,23
9,53
385500M0297
385500M0567
385500M0563
385500M1231
385500M1377
10 k
1 k
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
274
274
274
274
274
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
no
no
no
no
no
no
no
no
no
no
unassembled
unassembled
unassembled
unassembled
unassembled
[7-28] [1.4]
[0.063] [0.047] [0.875] [0.375]
1-4 12
1,60
1,19
22,23
9,53
[7-28] [1.4]
1-4 12
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 31,75 9,53
1 k
[7-28] [1.4]
1-4 12
[0.063] [0.047] [1.25] [0.375]
1,60 1,19 22,23 9,53
200
500
[7-28] [1.4]
[0.063] [0.047] [0.875] [0.375]
1-4
12
1,60
1,19
22,23
9,53
[7-28] [1.4]
[0.063] [0.047] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
14,30
Shown with 50% shaft rotation
C
[0.563]
ø27,79 Max.
[1.094]
D
13,49
[0.531]
2,77
[0.109]
A
B
3,18
[0.125]
12,87
[0.546]
Locating
pin
ø6,35
[0.250]
22,23 Max.
[0.875]
3X 1,57
[0.062]
3/8-32 NEF-2A
90°
Terminal
base
Mounting surface
3
1
Left
3X 2,36
[0.093]
3X 3,15
[0.124]
Right
2
Center
0,635
[0.025]
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
44
385 Series Order Guides
Table 385-J Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-6
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
1-6 12
[7-42] [1.4]
12
1,60
1,19
12,7
9,53
385518M0106
385518M0869
385518M1309
385518M1813
385518M2059
10 k
2.5 k
2.5 k
10 k
50 k
10
10
10
10
10
4
4
4
4
4
4
4
4
4
4
274
274
274
274
274
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
312 S-4 312
14,30
yes
yes
yes
yes
yes
no
no
no
no
no
unassembled
unassembled
unassembled
unassembled
unassembled
[0.063] [0.047] [0.500] [0.375]
1,60
[0.063] [0.047] [0.875] [0.375]
1,60 1,19 12,7 9,53
[0.063] [0.047] [0.500] [0.375]
1,60 1,19 22,23 9,53
[0.063] [0.047] [0.875] [0.375]
1,19
22,23
9,53
1-6
12
1,60
1,19
12,7
9,53
[7-42] [1.4]
[0.063] [0.047] [0.500] [0.375]
Dimensional Drawings (For reference only: mm [in].)
C
[0.563]
Shown wiøth257,07%9 Mshaaxf.t rotation
D
[1.094]
13,49
[0.531]
2,77
[0.109]
A
B
3,18
[0.125]
12,87
[0.546]
Locating
pin
ø6,35
[0.250]
22,23 Max.
[0.875]
3X 1,57
[0.062]
90°
3/8-32 NEF-2A
Terminal
base
3
Mounting surface
1
Left
3X 2,36
[0.093]
3X 3,15
[0.124]
Right
0,635
[0.025]
2
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Table 385-K Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19
22,23
9,53
385000M8686 100 k
385500M9553 1 M
10
20
4
4
274
274
312
312
Z
Z
312
312
no
no
yes
yes
unassembled
unassembled
[7-28] [1.4]
[0.063] [0.047] [0.875] [0.375]
1-4
[7-28] [1.4]
12
1,60
1,19
22,23
9,53
10 k
10
[0.063] [0.047] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
ø27,79 Max.
[0.563]
[1.094]
D
13,49
[0.531]
B
2,77
[0.109]
A
3,18
[0.125]
12,87
[0.546]
Locating
pin
ø6,35
[0.250]
22,23 Max.
[0.875]
3X 1,57
[0.062]
90°
3/8-32 NEF-2A
Mounting surface
Terminal
base
3
1
Left
3X 2,36
[0.093]
3X 3,15
[0.124]
Right
0,635
[0.025]
2
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
45
385 Series Order Guides
Table 385-L Order Guide
Electrical
Mechanical
Dimensions
A
B
C
D
Catalog
Listing
Mounting
Hardware
1-4
12
1,60
1,19
22,23
9,53
385500M1246 250 k
10
2.5 k
10
274
312
Z
312
no
no
unassembled
[7-28] [1.4]
[0.063] [0.047] [0.875] [0.375]
Dimensional Drawings (For reference only: mm [in].)
Shown with 50% shaft rotation
14,30
C
ø27,79 Max.
[0.563]
[1.094]
D
13,49
[0.531]
B
2,77
[0.109]
A
3,18
[0.125]
12,87
[0.546]
ø6,35
Locating
[0.250]
pin
22,23 Max.
[0.875]
3X 1,57
[0.062]
90°
3/8-32 NEF-2A
Terminal
base
3
Mounting surface
3X 2,36
[0.093]
3X 3,15
[0.124]
1
Left
Right
0,635
[0.025]
2
Center
3,18 Min.
[0.125]
3X 1,57
[0.062]
2X 20°
Sensing and Productivity Solutions
46
THIS PAGE INTENTIONALLY LEFT BLANK.
Sensing and Productivity Solutions
47
ADDITIONAL INFORMATION
WARNING
PERSONAL INJURY
The following associated literature is available at sensing.honeywell.com:
• Product Range Guide
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the product
could result in personal injury.
• Product Line Guide
• Installation Instructions
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with each
product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge
those items it finds defective. The foregoing is buyer’s sole
remedy and is in lieu of all other warranties, expressed or
implied, including those of merchantability and fitness for
a particular purpose. In no event shall Honeywell be liable
for consequential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Find out more
Honeywell serves its customers through
a worldwide network of sales offices,
representatives and distributors.
For application assistance, current
specifications, pricing or name of the
nearest Authorized Distributor, contact your
local sales office.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
To learn more about Honeywell Sensing
and Productivity Solutions’ products, call
+1-815-235-6847 or 1-800-537-6945,
visit sensing.honeywell.com, or e-mail
inquiries to info.sc@honeywell.com
Sensing and Productivity Solutions
Honeywell
1985 Douglas Drive North
32301266-B-EN IL5O
November 2015
Golden Valley, MN 55422
© 2015 Honeywell International Inc. All rights reserved.
honeywell.com
相关型号:
©2020 ICPDF网 联系我们和版权申明