GSDC01S2 [HONEYWELL]

Snap Acting/Limit Switch, SPDT, Momentary, 0.55A, 125VDC, Panel Mount;


型号：	GSDC01S2
厂家：	Honeywell
描述：	Snap Acting/Limit Switch, SPDT, Momentary, 0.55A, 125VDC, Panel Mount 开关光电二极管
文件：	总9页 (文件大小：499K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Interactive Catalog Supplements Catalog PDFs

If you need detailed product information, or help choosing the right

product for your application, see our Interactive Catalogꢀ Use the

Interactive Catalog to access the most complete and up-to-date

information availableꢀ

Sensing and Control

In t e ra c t ive

Ca t a lo g ...

The Interactive Catalog provides an extensive collection of product

specifications, application data, and technical literature that can be

searched based on criteria you selectꢀ

Click this icon to try

the Interactive Catalogꢀ

This PDF catalog information was published in November 2000ꢀ

Sensing and Control

Honeywell Incꢀ

11 West Spring Street

Freeport, IL 61032

www.honeywell.com/sensing

Manual Switches

NT Series

Sealed Toggle Switches

FEATURES

ɀ Completely sealed switching

chamber

ɀ Step-design case provides added

space between terminals to help

prevent shorting

ɀ 1, 2 or 4-pole circuitry

ɀ Standard and pull to unlock levers.

ɀ 2 or 3 positions, maintained and

momentary action

ɀ Spring-loaded actuating mechanism

provides excellent tactile feedback

ɀ High impact strength, non-tracking

case enhances electrical stability

ɀ Temperature range: –40 to 71°C

(–40 to 160°F)

CONSTRUCTION

ɀ UL recognized, File E12252, Vol. 1,

Section 44

ɀ CSA certified, File LR4442

ɀ CE approved

GENERAL INFORMATION

MICRO SWITCH NT Series toggle switch-

es meet severe environment application

needs for a rugged, cost-effective toggle

switch. Quality construction features in-

clude a molded-in elastomer seal be-

tween the toggle lever and bushing, and

between the cover and case. In addition,

the terminal inserts are molded into the

high impact strength thermoplastic case.

Complete sealing of the switching cham-

ber enables NT toggles to comply with UL

508, paragraph 13.3 hosedown test.

These switches can be used where pan-

els are subjected to periodic splash and

washdowns, such as are common to food

and beverage equipment. They will also

withstand exposure to heavy accumula-

tions of early morning dew that may con-

dense on the control panel in cabs of

vehicles left outdoors overnight.

UL AND CSA ELECTRICAL RATINGS

Rating Code*

Electrical Rating

L192

10 amps, 125, 250, 277 VAC; ¹⁄4 Hp, 125 VAC; ¹⁄2 Hp, 250, 277 VAC; 3 amps,

125 VAC ‘‘L’’

L191

15 amps, 125, 250, 277 VAC; ¹⁄2 Hp, 125 VAC; 1 Hp, 250, 277 VAC; 5 amps,

125 VAC ‘‘L’’

* Referred to in order guides.

ELECTRICAL RATINGS

In Amperes

PULL-TO-UNLOCK LEVERS

Pull-to-unlock toggle levers prevent acci-

dental toggle movement. The knobbed

toggle lever must be pulled out approxi-

mately .09 in. (2,3 mm) to change posi-

tions. Thirteen different locking configu-

rations are available. This lever style also

has a non-glare matte nickel finish.

115 Volts AC

60 & 400 Hz

Elect.

Rating

28 Volts DC

115 VDC 250 VDC

230 VAC

Res .

Code

Ind. Res . Lamp

Res .

Ind. Res . Lamp

0.75

0.5

Application Note: Honeywell MICRO SWITCH does not recommend the use of

silver cadmium oxide switch contacts in non-arcing loads. Non-arcing loads are

generally loads less than 12 volts and/or 0.5 amp. NT switches use silver cadmium

oxide contacts. For other options, contact the MICRO SWITCH Application Center at

1-800-537-6945.

108

Honeywellɀ MICRO SWITCH Sensing and Controlɀ1-800-537-6945 USAɀ ⍣1-815-235-6847 Internationalɀ1-800-737-3360 Canada

Manual Switches

NT Series

Sealed Toggle Switches

NT 2-POSITION ORDER GUIDE

Circuits Made With Toggle At:

Pull-To-Unlock

Lever (Add s uffix

to Standard Lever

Lis ting)

Standard Lever

No.

Poles

Rating

Code

Elect.

Rating

Code

Keyway

Pos ition

Oppos ite

Keyway

Termination Style

Screw

1NT1-2

1NT1-3

1NT1-4

1NT1-6

1NT1-8

Solder

Q-C

OFF

1-2

OFF*

1-2*

2-3

OFF

2-3

L191

L192

11NT1-2

11NT1-3

11NT1-4

11NT1-6

11NT1-8

1NT91-2

1NT91-3

1NT91-4

1NT91-6

1NT91-8

D, F, G

OFF

1-2, 4-5

OFF*

1-2, 4-5*

2-3, 5-6

OFF

L191

L192

2NT1-2

2NT1-3

2NT1-4

2NT1-6

2NT1-8

12NT1-2

12NT1-3

12NT1-4

12NT1-6

12NT1-8

2NT91-2

2NT91-3

2NT91-4

2NT91-6

2NT91-8

D, F, G

2-3, 5-6

OFF

2-3, 5-6, 8-9, 11-12

OFF

L191

L192

4NT1-2

4NT1-3

4NT1-4

4NT1-6

4NT1-8

14NT1-2

14NT1-3

14NT1-4

14NT1-6

14NT1-8

4NT91-2

4NT91-3

4NT91-4

4NT91-6

4NT91-8

D, F, G

1-2, 4-5, 7-8, 10-11

OFF*

D, F, G

1-2, 4-5, 7-8, 10-11*

2-3, 5-6, 8-9, 11-12

NT 3-POSITION ORDER GUIDE

Circuits Made With Toggle At:

Pull-To-Unlock

Lever (Add s uffix

to Standard

No.

Rating

Code

Elect.

Rating

Code

Standard Lever

Termination Style

Keyway

Center

Oppos ite

Keyway

Poles Pos ition

Pos ition

Screw

Solder

Q-C

Lever Lis ting)

1-2

1-2*

NONE**

1-2*

OFF

1-2

2-3

2-3*

2-3

L191

L192

L191

L192

1NT1-1

1NT1-5

1NT1-7

11NT1-1 1NT91-1

11NT1-5 1NT91-5

11NT1-7 1NT91-7

ALL TYPES

E, F, K, L, M, N

E, L, N

E, F, K, M

1NT1-21 11NT1-21 1NT91-21

1NT1-31 11NT1-31 1NT91-31

1NT1-51 11NT1-51 1NT91-51

1NT1-61 11NT1-61 1NT91-61

1-2

OFF

2-3*

NONE**

1-2, 4-5

OFF

1-2, 4-5

OFF

2-3, 4-5

1-2, 5-6

2-3, 5-6

2-3, 5-6*

2-3, 5-6

2-3, 5-6*

NONE**

2-3, 5-6

2-3, 5-6*

L191

L192

L191

L192

L191

L192

2NT1-1

2NT1-5

2NT1-7

12NT1-1 2NT91-1

12NT1-5 2NT91-5

12NT1-7 2NT91-7

ALL TYPES

E, F, K, L, M, N

E, L, N

E, F, K, M

1-2, 4-5*

NONE*

NONE**

1-2, 4-5*

1-2, 4-5

1-2, 4-5*

2NT1-21 12NT1-21 2NT91-21

2NT1-31 12NT1-31 2NT91-31

2NT1-51 12NT1-51 2NT91-51

2NT1-61 12NT1-61 2NT91-61

2NT1-12 12NT1-12 2NT91-12

2NT1-10 12NT1-10 2NT91-10

2NT1-50 12NT1-50 2NT91-50

2NT1-70 12NT1-70 2NT91-70

ALL TYPES

L, F, K, L, M, N

E, L, N

1-2, 4-5, 7-8,

10-11

1-2, 4-5, 7-8,

10-11*

1-2, 4-5, 7-8,

10-11*

NONE*

OFF

2-3, 5-6, 8-9,

11-12

2-3, 5-6, 8-9,

11-12

2-3, 5-6, 8-9,

11-12*

2-3, 5-6, 8-9,

11-12

2-3, 5-6, 8-9,

11-12

2-3, 5-6, 8-9,

11-12*

L191

L192

L191

L192

L191

L192

4NT1-1

4NT1-5

4NT1-7

14NT1-1 4NT91-1

14NT1-5 4NT91-5

14NT1-7 4NT91-7

ALL TYPES

E, F, K, L, M, N

E, L, N

4NT1-21 14NT1-21 4NT91-21

4NT1-31 14NT1-31 4NT91-31

4NT1-51 14NT1-51 4NT91-51

4NT1-61 14NT1-61 4NT91-61

4NT1-12 14NT1-12 4NT91-12

4NT1-10 14NT1-10 4NT91-10

4NT1-50 14NT1-50 4NT91-50

4NT1-70 14NT1-70 4NT91-70

E, F, K, M

NONE**

1-2, 4-5, 7-8,

10-11

1-2, 4-5, 7-8,

10-11

1-2, 4-5, 7-8,

10-11*

1-2, 4-5, 7-8,

10-11

OFF

NONE**

2-3, 4-5, 7-8,

11-12

2-3, 4-5

2-3, 5-6, 8-9,

11-12

2-3, 5-6

8-9, 11-12

2-3, 5-6, 8-9,

11-12

2-3, 5-6, 8-9,

11-12*

ALL TYPES

E, F, K, L, M, N

E, L, N

1-2, 4-5

7-8, 10-11

1-2, 4-5, 7-8,

10-11*

1-2, 4-5, 7-8,

10-11*

2-3, 4-5, 7-8,

11-12

2-3, 4-5

* These positions are momentary. All others are maintained.

** Toggle lever is blocked from these products. Toggle becomes 2-position, with center being one extreme position.

Honeywellɀ MICRO SWITCH Sensing and Controlɀ1-800-537-6945 USAɀ ⍣1-815-235-6847 Internationalɀ1-800-737-3360 Canada

109

Manual Switches

NT Series

Sealed Toggle Switches

PULL-TO-UNLOCK OPTION

When ordering pull-to-unlock toggle list- der a INTI-1 pull-to-unlock toggle switch

ings, add the suffix letter shown in the with the lever locked in the center posi-

chart below to the standard toggle listing tion, add the letter E; i.e., INTI-1E.

and the MS number. For example, to or-

LOCKING CONFIGURATIONS

Locked In

Center and

Extreme Position

(Keyway Side)

Locked Out Of

Center And

Extreme Position

(Keyway Side)

Locked Out

Of Center

Position

Locked In

Extreme Position

(Opposite Keyway)

Locked In

Extreme Position

(Keyway Side)

Locked In

Three Positions

Locked In

Center Position

Locked Out Of

Center And

Extreme Position

(Opposite Keyway)

Locked In

Center And

Extreme Position

(Opposite Keyway)

Locked Out Of

And Into

Extreme Position

(Keyway Side)

Locked Out Of

Extreme Position

(Keyway Side)

And Into

Extreme Position

(Opposite Keyway)

Locked Out Of

Extreme Position

(Opposite Keyway)

MOUNTING DIMENSIONS:

(For reference only)

0,0 = mm

0.00 = inches

Key:

Panel cutout

With locking ring

Without locking ring

Note:

0 1,4/.06 MIN DEEP TO ACCOMMODATE LOCKING

RING. 15PA87 PANEL SEAL REQUIRES BLIND HOLE

TO INSURE SEAL INTEGRITY

DIM ‘‘A’’

1-pole

2 & 4-pole

29,5/1.16

34,4/1.35

NOTES:

Terminal Circuit Identification

1. Pull-to-unlock levers have 10,7/42 dia. knob

2. Locking ring, lockwasher, 2 hexnuts and terminal screws are

furnished unassembled.

Solder Terminals

Bushing mounting

torque is 10–15

in./lbs.

Terminal screw

mounting torque is 5

in./lbs. max.

Quick Connect Terminals

110

Honeywellɀ MICRO SWITCH Sensing and Controlɀ1-800-537-6945 USAɀ ⍣1-815-235-6847 Internationalɀ1-800-737-3360 Canada

This page intentionally left blank.

Honeywellɀ MICRO SWITCH Sensing and Controlɀ1-800-537-6945 USAɀ ⍣1-815-235-6847 Internationalɀ1-800-737-3360 Canada

111

Manual Switches

NT Series

Flat Base Sealed Toggles and Rockers

FEATURES

ɀ Sealed switching chamber

ɀ 1 or 2-pole circuitry

ɀ 2 or 3 position maintained and

momentary action

ɀ Flat base with quick-connect

terminals – mating connectors are

available

ɀ Spring-loaded actuating mechanism

provides tactile feedback

ɀ High impact strength, non-tracking

case enhances electrical stability

ɀ Temperature range: –40 to 71°C (–40

to 160°F)

ɀ UL Recognized, File E12252, vol. 1,

section 44

ɀ CSA Certified, File LR4442

ɀ CE approved

UL AND CSA ELECTRICAL RATINGS

Rating Code*

Electrical Rating

GENERAL INFORMATION

L192

10 amps, 125, 250, 277 VAC; ¹⁄4 Hp, 125 VAC; ¹⁄2 Hp, 250, 277 VAC; 3 amps,

125 VAC ‘‘L’’

MICRO SWITCH NT Series toggle switches

are designed to meet severe environment

application needs for rugged, cost-effective

manual switches. These flat base style

products are identical to the stepped

base style in construction and features.

L191

15 amps, 125, 250, 277 VAC; ¹⁄2 Hp, 125 VAC; 1 Hp, 250, 277 VAC; 5 amps,

125 VAC ‘‘L’’

ELECTRICAL RATINGS

In Amperes

The flat base allows for PC board or con-

nector use for easy wiring/connection.

The flat base NT toggle switches are

provided with quick-connect (spade)

termination. Mating connectors are

available.

115 Volts AC

60 & 400 Hz

28 Volts DC

Rating

Code

115 VDC 250 VDC

230 VAC

Res .

Ind. Res . Lamp

Res .

Ind. Res . Lamp

0.75

0.5

TERMINAL CIRCUIT IDENTIFICATION

Terminal identifications are referenced in

the order guides to indicate which circuits

are made in each toggle position (e.g.

‘‘1-2’’refers to circuit closure through ter-

minals 1 and 2).

Application Note: Honeywell MICRO SWITCH does not recommend the use of silver

cadmium oxide switch contacts in non-arcing loads. Non-arcing loads are generally

loads less than 12 volts and/or 0.5 amp. NT switches use silver cadmium oxide

contacts. For other options, contact the MICRO SWITCH Application Center at

1-800-537-6945.

112

Honeywellɀ MICRO SWITCH Sensing and Controlɀ1-800-537-6945 USAɀ ⍣1-815-235-6847 Internationalɀ1-800-737-3360 Canada

Manual Switches

NT Series

Flat Base Sealed Toggles

NT 2-POSITION ORDER GUIDE

Circuits Made At:

Catalog

Lis ting

Rating Code Toggle Q-C

No. of

Poles

Keyway

Pos ition

Oppos ite

Keyway

UL Rating

Code

Electrical

OFF

1-2

OFF**

1-2**

2-3

OFF

2-3

L191

L192

31NT91-2

31NT91-3

31NT91-4

31NT91-6

31NT91-8

OFF

1-2, 4-5

OFF**

1-2, 4-5**

2-3, 5-6

2-3, 4-6

OFF

L191

L192

32NT91-2

32NT91-3

32NT91-4

32NT91-6

32NT91-8

2-3, 4-6

NT 3-POSITION ORDER GUIDE

Circuits Made At:

Electrical

UL Rating Rating

Catalog

Lis ting

Toggle Q-C

No. of

Poles

Keyway

Pos ition

Center

Pos ition

Oppos ite

Keyway

Code

1-2

1-2**

NONE***

1-2**

OFF

1-2

2-3

2-3**

2-3

L191

L192

L191

L192

31NT91-1

31NT91-5

31NT91-7

31NT91-21

31NT91-31

31NT91-51

31NT91-61

1-2

OFF

2-3**

NONE***

1-2, 4-5

OFF

1-2, 4-5

OFF

2-3, 4-5

1-2, 5-6

2-3, 5-6

2-3, 5-6**

2-3, 5-6

2-3, 5-6**

NONE***

2-3, 5-6

L191

L192

L191

L192

L191

L192

32NT91-1

32NT91-5

32NT91-7

32NT91-21

32NT91-31

32NT91-51

32NT91-61

32NT91-12

32NT91-10

32NT91-50

32NT91-70

1-2, 4-5**

NONE***

1-2, 4-5**

1-2, 4-5

1-2, 4-5**

2-3, 5-6**

** These positions are momentary. All others are maintained.

*** Toggle lever is blocked from these positions. Toggle becomes 2-position, with center being one extreme

position.

MATING CONNECTORS ORDER GUIDE

Des cription

Catalog Lis ting

19PA168-NT

19PA169-NT

2-pole connector

1-pole connector, same package size as 2-pole connector

LOCKING CONFIGURATIONS

Locked In

Center and

Extreme Position

(Keyway Side)

Locked Out Of

Center And

Extreme Position

(Keyway Side)

Locked Out

Of Center

Position

Locked In

Extreme Position

(Opposite Keyway)

Locked In

Extreme Position

(Keyway Side)

Locked In

Three Positions

Locked In

Center Position

Locked Out Of

Center And

Extreme Position

(Opposite Keyway)

Locked In

Center And

Extreme Position

(Opposite Keyway)

Locked Out Of

And Into

Extreme Position

(Keyway Side)

Locked Out Of

Extreme Position

(Keyway Side)

And Into

Extreme Position

(Opposite Keyway)

Locked Out Of

Extreme Position

(Opposite Keyway)

Honeywellɀ MICRO SWITCH Sensing and Controlɀ1-800-537-6945 USAɀ ⍣1-815-235-6847 Internationalɀ1-800-737-3360 Canada

113

This page intentionally left blank.

114

Honeywellɀ MICRO SWITCH Sensing and Controlɀ1-800-537-6945 USAɀ ⍣1-815-235-6847 Internationalɀ1-800-737-3360 Canada

Manual Switches

NT Series

Flat Base Sealed Toggles and Rockers

MOUNTING DIMENSIONS (For reference only)

Toggle Switches

Bushing mounting torque is 10–15 in./lbs.

Honeywellɀ MICRO SWITCH Sensing and Controlɀ1-800-537-6945 USAɀ ⍣1-815-235-6847 Internationalɀ1-800-737-3360 Canada

115

GSDC01S2 [HONEYWELL]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E