HIH-3610-001 [HONEYWELL]
Molded thermoset plastic housing with cover; 热固性模压塑料外壳，盖
| 型号： | HIH-3610-001 |
| 厂家： | 
Honeywell |
| 描述： | Molded thermoset plastic housing with cover |
| 文件： | 总4页 (文件大小：75K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Humidity Sensors
Humidity Sensor
HIH-3610 Series
FEATURES
·
·
·
Molded thermoset plastic
housing with cover
Linear voltage output vs
%RH
Laser trimmed
interchangeability
Low power design
High accuracy
Fast response time
Stable, low drift
·
·
·
·
performance
·
Chemically resistant
TYPICAL APPLICATIONS
·
·
·
·
·
Refrigeration
Drying
Metrology
Battery-powered systems
OEM assemblies
The HIH-3610 Series humidity sensor is designed specifically for high
volume OEM (Original Equipment Manufacturer) users. Direct input to a
controller or other device is made possible by this sensor’s linear voltage
output. With a typical current draw of only 200 mA, the HIH-3610 Series is
ideally suited for low drain, battery operated systems. Tight sensor
interchangeability reduces or eliminates OEM production calibration costs.
Individual sensor calibration data is available.
The HIH-3610 Series delivers instrumentation-quality RH (Relative
Humidity) sensing performance in a low cost, solderable SIP (Single In-line
Package). Available in two lead spacing configurations, the RH sensor is a
laser trimmed thermoset polymer capacitive sensing element with on-chip
integrated signal conditioning. The sensing element's multilayer
construction provides excellent resistance to application hazards such as
wetting, dust, dirt, oils, and common environmental chemicals.
WARNING
PERSONAL INJURY
· DO NOT USE these products as safety or emergency stop devices, or in
any other application where failure of the product could result in personal
injury.
Failure to comply with these instructions could result in death or
serious injury.
WARNING
MISUSE OF DOCUMENTATION
· The information presented in this product sheet is for reference only. Do
not use this document as system installation information
· Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
Failure to comply with these instructions could result in death or
serious injury.
Sensing and Control
Humidity Sensors
Humidity Sensor
HIH-3610 Series
TABLE 1: PERFORMANCE SPECIFICATIONS
Parameter
Condition
(1)
RH Accuracy
±2% RH, 0-100% RH non-condensing, 25 °C, Vsupply = 5 Vdc
±5% RH, 0-60% RH; ±8% @ 90% RH typical
±0.5% RH typical
RH Interchangeability
RH Linearity
RH Hysteresis
±1.2% RH span maximum
RH Repeatability
RH Response Time, 1/e
RH Stability
±0.5% RH
15 sec in slowly moving air at 25 °C
±1% RH typical at 50% RH in 5 years
Power Requirements
Voltage Supply
4 Vdc to 5.8 Vdc, sensor calibrated at 5 Vdc
200 mA at 5 Vdc
Current Supply
Voltage Output
Vout = Vsupply (0.0062(Sensor RH) + 0.16), typical @ 25 °C
(Data printout option provides a similar, but sensor specific, equation at 25 °C.)
0.8 Vdc to 3.9 Vdc output @ 25 °C typical
Vsupply = 5 Vdc
Drive Limits
Push/pull symmetric; 50 mA typical, 20 mA minimum, 100 mA maximum
Turn-on £ 0.1 sec
Temperature Compensation True RH = (Sensor RH)/(1.093-0.0021T), T in °F
True RH = (Sensor RH)/(1.0546-0.00216T), T in °C
Effect @ 0% RH
±0.007 %RH/°C (negligible)
Effect @ 100% RH
-0.22% RH/°C (<1% RH effect typical in occupied space systems above 15 °C (59 °F))
Humidity Range
Operating
Storage
0 to 100% RH, non-condensing(1)
0 to 90% RH, non-condensing
Temperature Range
Operating
-40 °C to 85 °C (-40 °F to 185 °F)
-51 °C to 125 °C (-60 °F to 257 °F)
Storage
Package(2)
Three pin, solderable SIP in molded thermoset plastic housing with thermoplastic
cover
Handling
Notes:
Static sensitive diode protected to 15 kV maximum
1. Extended exposure to 90% RH causes a reversible shift of 3% RH.
2. This sensor is light sensitive. For best results, shield the sensor from bright light.
2 Honeywell · Sensing and Control
For application help: call 1-800-537-6945
Humidity/Moisture Sensors
Humidity Sensor
HIH-3610 Series
FACTORY CALIBRATION
FIGURE 2: OUTPUT VOLTAGE VS RELATIVE
HUMIDITY AT 0 °C
HIH-3610 sensors may be ordered with a
calibration and data printout (Table 2). See order
guide on back page.
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
4.07
TABLE 2: EXAMPLE DATA PRINTOUT
Model
Channel
Wafer
MRP
HIH-3610-001
92
030996M
337313
Calculated values at 5 V
Vout @ 0% RH
Vout @ 75.3% RH
0.958 V
3.268 V
Linear output for 2% RH
accuracy @ 25 °C
0.8 Sensor Response
Zero offset
Slope
RH
Best Linear Fit
0.958 V
30.680 mV/%RH
(Vout-zero offset)/slope
(Vout-0.958)/0.0307
0
20 40 60 80 100
Relative Humidity (%)
Ratiometric response for 0
to 100% RH
Vout
Vsupply (0.1915 to 0.8130)
FIGURE 3: OUTPUT VOLTAGE VS RELATIVE
HUMIDITY AT 0 °C, 25 °C, 85 °C
FIGURE 1: RH SENSOR CONSTRUCTION
4.5
DIRT, DUST AND OILS DO NOT AFFECT SENSOR
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
4.07
3.90
3.50
THERMOSET
POLYMER
POROUS PLATINUM LAYER
THERMOSET POLYMER
PLATINUM LAYER
0.8
SUBSTRATE (SILICON)
0
20 40 60 80 100
Relative Humidity (%)
For application help: call 1-800-537-6945
Honeywell · Sensing and Control 3
Humidity/Moisture Sensors
Humidity Sensor
HIH-3610 Series
WARRANTY/REMEDY
ORDER GUIDE
Honeywell warrants goods of its
manufacture as being free of defective
materials and faulty workmanship.
Contact your local sales office for
warranty information. If warranted
goods are returned to Honeywell
during the period of coverage,
Honeywell will repair or replace
without charge those items it finds
defective. The foregoing is Buyer’s
sole remedy and is in lieu of all other
warranties, expressed or implied,
including those of merchantability
and fitness for a particular
purpose.
Catalog Listing Description
HIH-3610-001
HIH-3610-002
HIH-3610-003
HIH-3610-004
Integrated circuit humidity sensor, 0.100 in lead
pitch SIP
Integrated circuit humidity sensor, 0.050 in lead
pitch SIP
Integrated circuit humidity sensor, 0.100 in lead
pitch SIP with calibration and data printout
Integrated circuit humidity sensor, 0.050 in lead
pitch SIP with calibration and data printout
FIGURE 4: MOUNTING DIMENSIONS (for reference only) mm (in)
Specifications may change without
notice. The information we supply is
believed to be accurate and reliable
as of this printing. However, we
assume no responsibility for its use.
While we provide application
assistance personally, through our
literature and the Honeywell web site,
it is up to the customer to determine
the suitability of the product in the
application.
HIH-3610-002
HIH-3610-004
HIH-3610-001
HIH-3610-003
4,27
(0.168)
4,27
(0.168)
2,03
(0.080)
9,47
(0.373)
9,47
(0.373)
1,90
(0.075)
For application assistance, current
specifications, or name of the nearest
Authorized Distributor, check the
Honeywell web site or call:
12,19 MIN
(0.480)
12,70 MIN
(0.50)
1-800-537-6945 USA
1-800-737-3360 Canada
1-815-235-6847 International
FAX
1-815-235-6545 USA
INTERNET
www.honeywell.com/sensing
-
+
OUT
-
3X 0,38
(0.015)
+
OUT
2,54
(0.100)
3X 0,38
(0.015)
5,08
(0.200)
1,27
(0.050)
info.sc@honeywell.com
2,54
(0.100)
Sensing and Control
Honeywell
11 West Spring Street
Freeport, Illinois 61032
www.honeywell.com/sensing
Printed with Soy Ink
on 50% Recycled Paper
009012-2-EN IL50 GLO 501 Printed in USA
相关型号：
©2020 ICPDF网 联系我们和版权申明