HRF-SW1031-FL-TR [HONEYWELL]
Diversity Switch, 0MHz Min, 2500MHz Max, 3.6dB Insertion Loss-Max, VQFN-24;型号: | HRF-SW1031-FL-TR |
厂家: | Honeywell |
描述: | Diversity Switch, 0MHz Min, 2500MHz Max, 3.6dB Insertion Loss-Max, VQFN-24 分离技术 隔离技术 射频 微波 |
文件: | 总5页 (文件大小:245K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HRF-SW1031
SP6T Absorptive RF Switch DC to 2.5GHz Operation
The Honeywell HRF-SW1031 is a high performance single pole 6 throw (SP6T)
absorptive RF switch that is ideal for use in wireless base station and handset
applications that require minimum power and minimum insertion loss.
The HRF-SW1031 is manufactured with Honeywell's patented Silicon On Insulator
(SOI) CMOS technology, which provides the performance of GaAs with the economy
and integration capabilities of conventional CMOS technology. These switches are DC
coupled to improve lower operating frequency, frequency response and reduce the
number of DC bias points required.
HRF-SW1031 in VQFN Package
FEATURES
Typical High Isolation Of > 42 dB @ 2 GHz
Typical Low Insertion Loss Of 1.2 dB @ 1 GHz
Integrated CMOS Control Logic
DC-coupled, bi-directional RF Path
Single Positive Supply Voltage
Ultra Small VQFN Packaging
Impedance matched to 75 Ohm systems
Lead-free, RoHS compliant and halogen-free
RF ELECTRICAL SPECIFICATIONS @ + 25oC
Results @ VDD = 5.0 +/- 10%, VSS = 0 unless otherwise stated, Z0 = 75 Ohms
Contact Honeywell for relative performance at other supply configurations
Parameter
Test Condition
Frequency
Minimum
Typical
Maximum
Units
1.0 GHz
2.0 GHz
2.5 GHz
1.2
1.4
1.7
2.2
3.1
3.6
dB
dB
dB
Insertion Loss
1.0 GHz
2.0 GHz
3.0 GHz
36
30
27
50
42
40
dB
dB
dB
Isolation
Return Loss
-10
-15
dB
VSS = Gnd
VSS = -5V
1.0 GHz
1.0 GHz
14
23
dBm
dBm
1dB Compression
Two-Tone Inputs, up to + 5 dBm
VSS = Gnd
Input IP3
2.0 GHz
2.0 GHz
31
33
dBm
dBm
VSS = -5V
Trise, Tfall
Ton, Toff
10% To 90%
50% Cntl To 90% / 10% RF
10
20
ns
ns
HRF-SW1031
DC ELECTRICAL SPECIFICATIONS @ + 25°C
Parameter
Minimum
3.31
Typical
5.0
Maximum
Units
V
VDD
VSS
IDD
5.5
-5.0
V
<5
35
0.8
VDD
10
uA
V
CMOS Logic Level (0)
CMOS Logic Level (1)
Input Leakage Current
0
VDD – 0.8
V
uA
Note 1 - Performance curves are for VDD = +5.0 +/- 10%
ABSOLUTE MAXIMUM RATINGS1
Parameter
Absolute Maximum
+6.0
Units
VDD
V
V
VSS
-5.5
Vin Digital Logic 0
Vin Digital Logic 1
Input Power
ESD Voltage2
-0.6
V
Vdd + 0.6
> 35
V
dBm
V
400
Moisture Sensitivity Level
Operating Temperature Range
Storage Temperature Range
Level 3 @ 260OC
-40 to +85
-65 to +125
OC
OC
Note 1 - Operation of this device beyond any of these parameters may cause permanent damage.
Note 2 - Although the HRF-SW1031 contains ESD protection circuitry on all digital inputs, precautions should be taken to
ensure that the Absolute Maximum Ratings are not exceeded.
Latch-Up: Unlike conventional CMOS digital switches, Honeywell’s HRF-SW1031 is immune to latch-up.
TRUTH TABLE
RF Output
1
RF Output
2
RF Output
3
RF Output
4
RF Output
5
RF Output
6
C2
C1
C0
0
0
0
1
1
1
0
1
1
0
0
1
1
0
1
0
1
0
RFINPUT
RFINPUT
RFINPUT
RFINPUT
RFINPUT
RFINPUT
"0" = CMOS Low, "1” = CMOS High
Note: For codes 000 and 111 all outputs are in the terminated isolation state.
PIN CONFIGURATIONS
Pin
Function
Pin
Function
Pin
Function
Pin
Function
1
2
3
4
5
6
GROUND
GROUND
RFOUTPUT5
GROUND
GROUND
RFOUTPUT4
7
8
9
10
11
12
VDD
C2
C1
C0
VSS
13
14
15
16
17
18
GROUND
GROUND
RFOUTPUT2
GROUND
GROUND
RFOUTPUT1
19
20
21
22
23
24
GROUND
GROUND
RFINPUT
GROUND
GROUND
RFOUTPUT6
RFOUTPUT3
Note: Bottom ground plate must be grounded for proper RF performance.
2
www.honeywell.com/microwave
HRF-SW1031
PERFORMANCE CURVES
Insertion Loss
Typical SW1031 Insertion Loss
0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
0.0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
Isolation
Typical SW1031 Isolation
-25
-30
-35
-40
-45
-50
-55
-60
-65
-70
0
0.5
1
1.5
2
2.5
Frequency (GHz)
www.honeywell.com/microwave
3
HRF-SW1031
PACKAGE OUTLINE DRAWING
Notes
1. Pin 1 identifier can be a combination or a dot and/or chamfer on the bottom ground plane.
2. Dimensions are in millimeters.
HALOGEN-FREE MATERIAL SET
The –FL switches have a halogen-free material set that can withstand a maximum soldering temperature of 260OC.
LEAD FINISH
The package leads are Nickel Palladium with a Gold and Silver flash (NiPdAu+Ag). The configuration being manufactured
and delivered today is lead-free and RoHS compliant. Plating thicknesses are listed below in microns (um).
Ni = 0.254 um min Pd = 0.00254 um min Au+Ag = 0.00508 um min Au Composition = 30% min to 70% max
LEAD FREE QFN SURFACE MOUNT APPLICATION
Please see Application Note AN310a for assembly process recommendations. The maximum soldering temperature of
o
the - FL is 260 C. Application Notes can be found at our website: www.honeywell.com/microwave
CIRCUIT APPLICATION INFORMATION
These switches require a DC reference to ground. They may not operate properly when AC coupled on both the RF input
and output without a DC ground reference provided as part of the circuit. See Application Note AN311.
4
www.honeywell.com/microwave
HRF-SW1031
EVALUATION CIRCUIT BOARD
Honeywell's evaluation board provides an easy to use method of evaluating the RF performance of our switch. Simply
connect power; DC and RF signals to be measuring switch performance in less than 10 minutes.
RF Out6
RF Input
HRF-SW1030
Honeywell
RF Out1
RF Out5
HRF-SW1031
Evaluation Board
Top View
RF Out4
RF Out2
Gnd
VDD
C2
RF Out3
HRF-SW1031 Evaluation Board
C1
C0
VSS
Gnd
Note:
HRF-SW1031 is the Z0 = 75 ohm version of the SW1030 evaluation board.
EVALUATION CIRCUIT BOARD LAYOUT DESIGN DETAILS
Item
Description
PCB
Impedance Matched Multi-Layer FR4
Switch
HRF-SW1031 RF Switch
Chip Capacitor
RF Connector
DC Pin
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector
Mil-Max Model 800-10-064-10-001 Header Pins
ORDERING INFORMATION
Ordering Number
Delivery Method
Units Per Shipment
Tape and Reel
Evaluation Board
HRF-SW1031-FL-TR
HRF-SW1031-E
2500 Units per Reel
One Board Per Box
The new –FL switches replace and are electrically equivalent with the –GR switches. The –GR switches are obsolete.
FIND OUT MORE
For more information on Honeywell’s Microwave Products visit us online at www.honeywellmicrowave.com or contact
us at 800-323-8295 (763-954-2474 internationally).
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.
Honeywell
12001 Highway 55
Plymouth, MN 55441
Tel: 800-323-8295
Form #1031W
May 2012
www.honeywellmicrowave.com
©2012 Honeywell International Inc.
相关型号:
HRF-SW1040-B
SP4T, 824MHz Min, 1990MHz Max, 1 Func, 13dB Insertion Loss-Max, CMOS, ULTRA SMALL, LPCC
HONEYWELL
©2020 ICPDF网 联系我们和版权申明