SS360PT [HONEYWELL]
High Sensitivity Latching Digital Hall-Effect Sensor ICs with Built-in Pull-up Resistor; 高灵敏度锁存数字霍尔效应传感器IC,内置上拉电阻型号: | SS360PT |
厂家: | Honeywell |
描述: | High Sensitivity Latching Digital Hall-Effect Sensor ICs with Built-in Pull-up Resistor |
文件: | 总5页 (文件大小:772K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SS360PT/SS460P
High Sensitivity Latching Digital
Hall-Effect Sensor ICs with Built-in
Pull-up Resistor
DESCRIPTION
These products offer reverse polarity protection, deliver a stable
The SS360PT/SS460P High Sensitivity Latching Hall-Effect
Sensor ICs with Built-in Pull-up Resistor are small, sensitive and
versatile devices that are operated by the magnetic field from
a permanent magnet or an electromagnet. They are designed
to respond to alternating North and South poles. The SS360PT
is activated by a North pole while the SS460P is activated by a
South pole.
output over a -40 °C to 125 °C [-40 °F to 257 °F] temperature
range, and can accept a dc supply voltage from 3 Vdc up to 24
Vdc (see specifications below for details).
For brushless dc motor manufacturers that need latching sensors
with reliable, consistent performance for more efficient and
smaller designs, Honeywell’s new family of High Sensitivity Hall-
Effect Latching Sensor ICs with Built-in Pull-up resistor responds
to low magnetic fields and offers repeatable operation while
delivering faster response times to a change in magnetic field for
better motor efficiency.
The SS360PT/SS460P offers reliable switching points with a
high magnetic sensitivity of 30 G typical (55 G maximum). This
sensor IC does not use chopper stabilization on the Hall element,
providing a clean output signal and a faster latch response time
when compared to competitive high sensitivity Hall-effect bipolar
latching sensor ICs which do use chopper stabilization.
These Hall-effect devices are available in two package styles: the
SS360PT in the miniature SOT-23 surface mount package and
the SS460P in the leaded, flat TO-92-style package.
The internal pull-up resistor often eliminates the need for external
components, helping to reduce the system cost. These high-
performance yet economical sensor ICs are well suited for
demanding, cost-sensitive high-volume applications.
The SS360PT is supplied on tape and reel (3000 units per reel).
The SS460P is available in a bulk package (1000 units per bag).
FEATURES AND BENEFITS
• Fastest response time in its class: Provides more efficiency
in commutating a brushless dc motor
• Sub-miniature, SOT-23 surface mount package (SS360PT)
supplied on tape and reel: Allows for compact design with
automated component placement
• No chopper stabilization: Results in a clean output signal
• High sensitivity: Operates from only 30 Gauss typical, at
25 °C [77 °F] and 55 Gauss maximum over the full -40 °C to
125 °C [-40 °F to 257 °F] temperature range, allowing for the
use of smaller, magnets or a wider air gap
• Small, leaded, flat TO-92-style package (SS460P): Allows for
a compact PC board layout
• Wide operating voltage range of 3 Vdc to 24 Vdc: Allows for
potential use in a wide range of applications
• Internal pull-up Hall IC design: Simplifies installation and
helps reduce component count and system cost
• Bipolar latching magnetics: Makes these products well-
suited for accurate speed sensing and RPM (revolutions per
minute) measurement
• Built-in reverse voltage capability: Enhances the protection
of the sensor and the circuits
• Robust design: Allows operation up to 125 °C [257 °F]
• RoHS-compliant material meets directive 2002/95
SS360PT/SS460P
POTENTIAL APPLICATIONS
Industrial/Commercial
Brushless dc motor commutation for white goods and other
•
appliances
•ꢀ Flow-rateꢀsensingꢀ
•ꢀ SpeedꢀandꢀRPMꢀsensing
•ꢀ Tachometer,ꢀcounterꢀpickup
•ꢀ Motorꢀandꢀfanꢀcontrolꢀ
Table 1. SS360PT/SS460P Performance Specifications (At 3 Vdc to 24 Vdc supply, 20 mA load,TA = -40 ºC to 125 ºC [-40 ºF to
257 ºF] except where otherwise specified.)
Characteristic
Condition
MIn.
Typ.
Max.
Unit
Supply voltage:
SS360PT
SS360PT
-40 °C to 110 °C [-40 °F to 230 °F]
125 °C [257 °F]
-40 °C to 125 °C [-40 °F to 257 °F]
3
3
3
–
–
–
24
16
24
Vdc
SS460P
V
supply = 3 V at 25 °C [77 °F]
–
–
3.5
–
6
10
Supply current
mA
–
Vsat
Gauss >55
Gauss >55
–
–
–
–
0.6
10
V
µA
Output leakage current
Internal pull-up resistor
Rise/fall time
–
7. 5
–
10.0
–
12.5
1.5
kOhm
µs
Vsupply = 12 V at 25 °C [77 °F]
Thermal resistance:
SS360PT (SOT-23)
SS460P (flat TO-92-style)
–
–
–
–
303
233
–
–
°C/W
Operate
Release
-40 °C to 125 °C [-40 °F to 257 °F]
-40 °C to 125 °C [-40 °F to 257 °F]
5
-55
30
-30
55
-5
Gauss
Gauss
Differential
Operating temperature
-40 °C to 125 °C [-40 °F to 257 °F]
Vsupply = 3 Vdc to 24 Vdc
40
-40 [-40]
60
–
80
125 [257]
Gauss
°C [°F]
Storage temperature:
SS360PT
SS460P
–
–
-40 [-40]
-40 [-40]
–
–
150 [302]
165 [329]
°C [°F]
NOTICE
Bipolar Hall-effect sensor ICs may have an initial output in either the ON or OFF state if powered up with an applied magnetic field
in the differential zone (applied magnetic field >Brp and <Bop). Honeywell recommends allowing 10 µs for output voltage to stabilize
after supply voltage has reached its normal operating value.
NOTICE
The magnetic field strength (Gauss) required to cause the switch to change state (operate and release)
will be as specified in the magnetic characteristics. To test the switch against the specified magnetic
characteristics, the switch must be placed in a uniform magnetic field.
Table 2. SS360PT/SS460P Absolute Maximum Ratings1
Characteristic
Supply voltage
Applied output voltage
Output current
MIn.
-26.0
-0.5
–
Typ.
Max.
26.0
Unit
V
–
–
–
–
26.0
V
20
mA
Gauss
Magnetic flux
–
no limit
Note 1: Absolute maximum ratings are the extreme limits that the device will withstand without damage to the device. However, the
electrical and mechanical characteristics are not guaranteed as the maximum limits (above recommended operating conditions) are ap-
proached, nor will the device necessarily operate at absolute maximum ratings.
2 Honeywell • Sensing and Control
High Sensitivity Latching Hall-Effect Sensor ICs with Built-in Pull-up Resistor
Figure 1. Sensor IC Block Diagram
Rpull-up
10 kΩ
VREG
VS
OUT
ESD
+
+
Clamp
Current
Sinking
Output
Hall
ESD
Amplifier
Comparator
Clamp
GND
Programming
Circuit
Figure 2.Typical Magnetic Characteristics vs Ambient Temperature at
Supply Voltages
Figure 3. SS360PT Maximum Rated Supply
Voltage vs Temperature
Figure 4. Magnetic Activation
SS360PT
SS460P
S
N
N
S
N S
S N
Label Side
Label Side
South Pole toward IC:
Output = Low
North Pole toward IC:
Output = High
North Pole toward IC:
Output = Low
South Pole toward IC:
Output = High
Honeywell • Sensing and Control
3
SS360PT/SS460P
Figure 5. SS360PT Mounting and Tape/Reel Dimensions (For reference only. mm/[in].)
Tape
2,90
[0.114]
3
GND
(-)
NOMINAL
IC CENTER
ꢆꢁ ꢇꢃ
>ꢃꢄ ꢀꢀꢃ@
ꢀꢁ ꢂꢃ
>ꢃꢄ ꢃꢂꢅ@
1
2
VCC
(+)
OUTPUT
3X 0,50
[0.20]
0,95
[0.037]
1,90
[0.075]
Reel
6
1
NOMINAL
TO IC
SENSING
SURFACE
0,413
[0.016]
0,77
[0.030]
1,20
1,45
[0.047]
0,787
[0.031]
[0.057]
0,60
[0.024]
Figure 6. SS460P Mounting Dimensions (For reference only. mm/[in].)
2,5
NOMINAL
TO IC
0,46
[0.100]
[0.018]
SENSING
SURFACE
1,6
[0.062]
4,1
[0.161]
NOMINAL
IC CENTER
3.0
[0.118]
16
1,83
[0.072]
14,61
[0.575]
VS
GND
OUT
3X 0,3
[0.015]
3X 0,43
[0.017]
2X 1,3
[0.050]
0,76
[0.03]
3X 0,38
[0.015]
4 Honeywell • Sensing and Control
Order Guide
Catalog Listing
Description
High sensitivity latching, digital Hall-effect sensor IC with built-in pull-up resistor, North pole activated,
SOT-23 package, tape and reel packaging (3000 units per reel)
SS360PT
SS460P
High sensitivity latching, digital Hall-effect sensor IC with built-in pull-up resistor, South pole activated,
flat TO-92-style package, bulk packaging (1000 units per bag)
WARNING
WARNING
PERSONAL INJURY
MISUSE OF DOCUMENTATION
• The information presented in this datasheet is for reference
only. DO NOT USE this document as product installation
information.
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
•ꢀ Completeꢀinstallation,ꢀoperationꢀandꢀmaintenanceꢀ
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY
Honeywell warrants goods of its manufacture as being free
of defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise by
Honeywell in writing; please refer to your order acknowledgement
or consult your local sales office for specific warranty details. If
warranted goods are returned to Honeywell during the period of
coverage, Honeywell will repair or replace, at its option, without
charge those items it finds defective. The foregoing is buyer’s
sole remedy and is in lieu of all warranties, expressed or
implied, including those of merchantability and fitness for a
particular purpose. In no event shall Honeywell be liable for
consequential, special, or indirect damages.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network
of sales offices, representatives and distributors. For application
assistance, current specifications, pricing or name of the nearest
Authorized Distributor, contact your local sales office or:
E-mail: info.sc@honeywell.com
Internet: sensing.honeywell.com
Phone and Fax:
Asia Pacific
+65 6355-2828
+65 6445-3033 Fax
+44 (0) 1698 481481
+44 (0) 1698 481676 Fax
+1-305-805-8188
+1-305-883-8257 Fax
+1-800-537-6945
Europe
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Latin America
USA/Canada
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
+1-815-235-6847
+1-815-235-6545 Fax
Sensing and Control
Honeywell
1985 Douglas Drive North
009560-1-EN
September 2013
Golden Valley, MN 55422 USA
Copyright © 2013 Honeywell International Inc. All rights reserved.
sensing.honeywell.com
相关型号:
©2020 ICPDF网 联系我们和版权申明