XPX05ABFH [HONEYWELL]
Peizoresistive Sensor, Absolute, 0Psi Min, 5Psi Max, 0-168.5mV, Through Hole Mount;
| 型号： | XPX05ABFH |
| 厂家： | 
Honeywell |
| 描述： | Peizoresistive Sensor, Absolute, 0Psi Min, 5Psi Max, 0-168.5mV, Through Hole Mount 传感器 换能器 |
| 文件： | 总4页 (文件大小：159K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
XPC/XPCL and XPX/XPXL
Series
Uncompensated/Compensated and
Compensated Calibrated Silicon
Pressure Sensors
DESCRIPTION
On devices of 5 psi and above, the top side of the chip is
The XPC/XPCL and XPX/XPXL Series sensors integrate
silicon micromachined sensing technology, temperature
compensation, and calibration in a complete family of low-cost
packages. This series offers a cost-effective solution for design
requirements.
protected against humidity by a Silgel® coating.
Although the sensors are designed for use with noncorrosive,
nonionic pressure media, they accommodate many gases that
are used in medical applications.
These piezoresistive pressure sensors use micromachined
silicon chips mounted on ceramic and protected with a plastic
cap. Several tube arrangements with nylon housings are
available for various pressure applications.
FEATURES
POTENTIAL APPLICATIONS
•
•
•
•
•
•
•
Low cost, small size
•
•
•
Medical applications
Temperature compensated
Zero and span calibrated
Millivolt output
Applications requiring small size
Applications requiring vacuum and positive pressure
reference or both
Differential, gage and absolute pressure
Constant voltage excitation
High impedance - low current
XPC/XPCL and XPX/XPXL Series
ELECTRICAL SPECIFICATIONS
Characteristic
XPC/XPCL at 12 Vdc, 25 °C [77 °F]
XPX/XPXL at 5 Vdc, 25 °C [77 °F]
Min.
Typ.
Max.
Unit
Unit
Min.
3.0
-50
–
Typ.
5.0
0
Max.
12.0
50
Excitation voltage
Null
3.0
-1.0
–
12.0
0
–
16.0
1.0
±1.0
Vdc
mV
Vdc
mV
mV
Offset temperature shift(1)
0 °C to 25 °C [32 °F to 77°F]
25 °C to 70 °C [77 °F to 158 °F]
Full scale temperature shift(1)
0 °C to 25 °C [32 °F to 158 °F]
25 °C to 70 °C [77 °F to 158 °F]
Linearity, hysteresis error(2)
Input resistance
±0.5
mV
–
–
±2
PPM/°C
–
-2200
–
PPM/°C
–
5.0
–
0.25
–
3.0
–
–
–
1.0
–
–
85 [185]
125 [257]
50
% span
kOhm
kOhm
°C [°F]
°C [°F]
psi
0.25
–
3.0
–
–
–
1.0
–
–
85 [185]
125 [257]
50
% span
kOhm
kOhm
°C [°F]
°C [°F]
psi
5.0
Output resistance
–
Operating temperature
Storage temperature
Common mode pressure
Weight
-25 [-13]
-40 [-40]
-25 [-13]
-40 [-40]
–
–
–
–
2
–
g
2
–
g
Notes:
1. Shift is relative to 25 °C [77 °F].
2. Measured at 1/2 full scale rated pressure using BFSL.
ABSOLUTE OUTPUT
FS Pressure
XPC at 12 Vdc, 25 °C [77 °F]
Output Full Scale Span (mV)
XPX at 5 Vdc, 25 °C [77 °F]
Output Full Scale Span (mV)
Overpressure
(psi)
Max.
15
45
90
180
250
Min.
Typ.
60
Max.
Min.
Typ.
168.5
253
Max.
225
338
338
338
380
5 psi
57
85
85
85
95
63
95
95
95
105
112
168
168
189
210
15 psi
30 psi
60 psi
100 psi
90
90
90
100
253
263.5
295
GAGE/DIFFERENTIAL(1) OUTPUT
FS Pressure
XPC/XPCL at 12 Vdc, 25 °C [77 °F]
Output Full Scale Span (mV)
XPX/XPXL at 5 Vdc, 25 °C [77 °F]
Output Full Scale Span (mV)
Overpressure
(psi)
Max.
3
3
3
15
45
90
Min.
Typ.
25
Max.
Min.
50
Typ.
68
Max.
86
4 in H2O
10 in H2O
1 psi
5 psi
15 psi
30 psi
60 psi
100 psi
150 psi
23
19
17
57
85
85
85
95
85
27
21
19
63
95
95
95
105
95
20
18
60
90
90
90
100
90
40
40
78.5
75
168.5
253
253
263.5
112
110
225
338
338
338
380
338
112
168
168
189
210
187
180
250
250
295
262.5
Note:
1. Differential common mode pressure should not exceed 50 psi.
MOUNTING DIMENSIONS (For reference only: mm (in).)
D/A Housing
(Differential/Absolute)
GFS/AFS Housing
(Gage/Absolute Offset Axial)
GBFS Housing
(Gage Backside Offset Axial)
2
www.honeywell.com/sensing
Uncompensated/Compensated and Compensated Calibrated
Silicon Pressure Sensors
MOUNTING DIMENSIONS (For reference only: mm (in).)
GF/AF Housing
(Gage/Absolute Axial)
DF Housing
(Differential Axial)
GBF Housing
(Gage Backside Axial)
GT/AT Housing
(Gage/Absolute Radial)
GBT Housing
(Gage Backside Radial)
DT Housing
(Differential Radial)
Honeywell Sensing and Control
3
EQUIVALENT CIRCUIT
Pinout
Media compatibility: Clean, dry gases only.
1. -V Excitation
2. + Output Signal
3. +V Excitation
4. - Output Signal
P1 Port: Media must be compatible with epoxy-based adhesive and silicon gel.
P2 Port: Media must be compatible with nylon housing, epoxy-based adhesive and
silicon.
ORDER GUIDE(1)
Notes:
1. Not all combinations may be available. Contact Honeywell representative for details.
2. Option available in ported gage version only.
WARNING
WARNING
PERSONAL INJURY
MISUSE OF DOCUMENTATION
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Failure to comply with these instructions could result in
death or serious injury.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise
by Honeywell in writing; please refer to your order
acknowledgement or consult your local sales office for specific
warranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network
of sales offices, representatives and distributors. For
application assistance, current specifications, pricing or name
of the nearest Authorized Distributor, contact your local sales
office or:
E-mail: info.sc@honeywell.com
Internet: www.honeywell.com/sensing
Phone and Fax:
Asia Pacific +65 6355-2828
While we provide application assistance personally, through
our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the
application.
+65 6445-3033 Fax
Europe
+44 (0) 1698 481481
+44 (0) 1698 481676 Fax
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this
printing. However, we assume no responsibility for its use.
+1-815-235-6545 Fax
Sensing and Control
Honeywell
1985 Douglas Drive North
008046-5-EN IL50 GLO Printed in USA
July 2007
© 2007 Honeywell International Inc. All rights reserved.
Minneapolis, MN 55422
www.honeywell.com/sensing
相关型号：
XPX05ABTH
Peizoresistive Sensor, Absolute, 0Psi Min, 5Psi Max, 0-168.5mV, Through Hole Mount
HONEYWELL
XPX05AC
Peizoresistive Sensor, Absolute, 0Psi Min, 5Psi Max, 0-630mV, Round, Through Hole Mount
HONEYWELL
XPX05DBFC
Peizoresistive Sensor, Differential, 0Psi Min, 5Psi Max, 0-253mV, Through Hole Mount
HONEYWELL
XPX05DC
Pressure Sensor, DIFFERENTIAL, PEIZORESISTIVE PRESSURE SENSOR, 0-5Psi, 0-630mV, ROUND, THROUGH HOLE MOUNT
HONEYWELL
XPX05DFC
Peizoresistive Sensor, Differential, 0Psi Min, 5Psi Max, 0-630mV, Through Hole Mount
HONEYWELL
©2020 ICPDF网 联系我们和版权申明