ZS-00228-050 [HONEYWELL]
Inductive Sensor, 5mm Min, 10mm Max, Cylindrical,;型号: | ZS-00228-050 |
厂家: | Honeywell |
描述: | Inductive Sensor, 5mm Min, 10mm Max, Cylindrical, 传感器 换能器 |
文件: | 总8页 (文件大小:168K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Proximity Sensors
Line Guide
These rugged, one- or two-piece products are designed to
meet demanding temperature, vibration, shock, and EMI/EMP
interference requirements, and are available in a number of
housing materials and termination styles. Multiple potential
applications are found in the harsh environments of aerospace
(landing gear position, doors and slides, monitoring systems),
ordnance (projectile sensing, ammunition loading systems) and
marine (submarine hatch and door position, offshore equipment).
Uncommon sense. Honeywell Safety and Productivity Solutions
(S&PS) offers environmentally sealed proximity sensors in a
variety of technologies — including Eddy Current Killed Oscillator
(ECKO) and Hall-effect. Once a metallic object is detected
in front of the sensing face, a signal is passed through the
conditioning circuitry to give an output configured according to
the sensor application.
FEATURES
RDSA Series.
RDSB Series.
PROXIMITY SENSORS
Features: Train detection without track
circuits • Directional and non-directional
operating modes • Requires two wheel
detections to validate train presence
• Solid state technology • Self monitoring
• Can detect train direction or position
• Can detect sensor and power supply
faults
Features: Train detection without track
circuits • Directional and non-directional
operating modes • Requires two wheel
detections to validate train presence
• Solid state technology • Self monitoring
• Can detect train direction or position
RDS80004 Series.
Features: 2-wire dc inductive • Output
current is proportional to the applied
voltage and is designed to operate at
a nominal 16 Vdc with a 1 kOhm load
• Results in an output of 8 mA when no
wheel is detected, and 2 mA when a
wheel is detected • Available in high and
low frequency versions
Benefits: Enhanced reliability. Can
detect sensor and power supply faults.
Reduces risk of error. Often eliminates
problems with leaves, rust, snow, salt,
grit, dust, and oil on rails. No rail cutting,
drilling, or insulation is required if clamps
are used. Can be installed in parallel
with the old system, creating minimal
Benefits: Enhanced reliability. Reduces
risk of error. Often eliminates problems
with leaves, rust, snow, salt, grit, dust,
and oil on rails. No rail cutting, drilling, or
insulation is required if clamps are used.
Can be installed in parallel with the old
Benefits: Non-contact detection of rail
wheel flanges at speeds up to 500 km/h.
Ease of installation, electrically robust.
Enhanced life, low “in track” maintenance.
Supports extended lineside transmission
distances. Facilitates use in wheel
detection systems and fault diagnosis.
Potential applications include train
detection (presence, direction, speed),
train direction detectors, and train axle
counters.
system, creating minimal changeover time. changeover time. Potential applications
Potential applications include crossing
gate closure on train approach (non
fail-safe), train detection for monitoring
systems, and wagon location/direction in
marshalling yards.
include crossing gate closure on train
approach (non fail-safe), train detection for
monitoring systems, and wagon location/
direction in marshalling yards.
Scontinuedonpage 6
Proximity Sensors Line Guide
Unprecedented value.
Honeywell S&PS has
developed a new inductive
Proximity Sensors
RDS80004 Series
sensor line for potential
transportation and industrial
applications. And every
proximity sensing part or
solution is infused with our
legendary quality:
Description
rail wheel proximity sensors
Polymide "Grilamid LKN5H"
230 kHz ꢀ0ꢁ% ꢀ10 kHz ꢀ0ꢁ
ꢀ0 Vdc to 30 Vdc
Housing material
Oscillating frequency
Supply voltage
Two-wire Vector Impedance
Technology: Our patented
readout technique, when
used with our two-wire
proximity sensor, utilizes an
algorithm and temperature
compensation to provide
precision gap measurement.
Our proximity sensors have
enhanced reliability (over 5
million units and 25 million
flight hours for 340FW and
370 FW series).
Operating temperature range
Output current
-40 °C to 80 °C [-40 °F to ꢀ71 °F]
Supply voltage and load dependent% 2 mA/8 mA
> 400 HZ
Operating frequency (f)
Vibration
Sinusoidal ꢀ0 Hz to 2 kHz 20 g for 30 min, IEC 18-2-2
21,5 mm, 35mm*
Nominal sensing distance
* See installation guide
Proximity Sensors
RDSA Series
RDSB Series
RDSC Series
Impressive breadth of line:
Honeywell S&PS meets the
need of any fragmented
market by offering several
types of sensors, making us
the “one-stop shop” versus
niche companies. What’s
more, products have been put
to use in the field for years.
train detection system –
directional and non-
directional
combined train approach
and departure system
train departure control
system
Description
Housing type
modular control unit
Polycarbon
Relay rack housing
metal
modular control unit
Polycarbon
Housing material
ꢀ0 Vdc to 50 Vdc% 20 Vdc
to 50 Vdc
Supply voltage
20 Vdc to 50 Vdc
20 Vdc to 48 Vdc
-25 °C to 70 °C
[-ꢀ3 °F to ꢀ58 °F]
-25 °C to 70 °C
[-ꢀ3 °F to ꢀ58 °F]
-25 °C to 70 °C
[-ꢀ3 °F to ꢀ58 °F]
Operating temperature range
Supply current max. @ 25 °C
Global Channel: Honeywell
S&PS offers worldwide
support and manufacturing,
an important need in industrial
segments.
ꢀ500 mA
250 mA
3000 mA% ꢀ500 mA
non-vital train detection
at up to four locations or
direction at two. Other
outputs: fault status relay%
extended fault status relay
non-vital train approach
and vital train departure
indication. Other outputs:
timers and errors
failsafe train depart relay
output. Other outputs:
train in island, system
active and errors
Output functions
8 (RDSC0ꢀ2)%
1 (RDSC0ꢀ0)
Number of sensors used
Printer output
8
up to 4
no
yes
no
yes
yes (RDSC0ꢀ2)%
no (RDSC0ꢀ0)
Train reversing capability
yes
2
Safety and Productivity Solutions
Proximity Sensors
100 FW Series
200 FW Series
300 FW Series
Description
one-piece 5/8” proximity sensor
ECKO
one-piece 5/8” proximity sensor
hall
two-piece proximity sensor
ECKO
Technology
Target material
Load current
Supply current
Sensing face
all metals
magnet
ferrous metals
750 mA
ꢀ20 mA, 50 mA lamp
20 mA max. @ 25 °C
shielded% unshielded
ꢀ mm to ꢀ.99 mm [0.039 in to 0.0783
ꢀ00 mA, 50 mA lamp
20 mA max. @ 25 °C
shielded
15 mA max.
shielded
2 mm to 2.99 mm [0.0787 in to 0.ꢀꢀ77
in]
Guaranteed actuation distance in]% 5 mm to ꢀ0 mm [0.ꢀ97 in to 0.394
ꢀ.78 mm to 3.3 mm [0.07 in to 0.ꢀ30 in]
in]
Operating temperature range
Supply voltage
-55 °C to ꢀ25 °C [-17 °F to 257 °F]
ꢀ8 Vdc to 32 Vdc
-54 °C to ꢀ00 °C [-15.2 °F to 2ꢀ2 °F]
ꢀ8 Vdc to 32 Vdc
-77 °C to ꢀ25 °C [-ꢀ01.1 °F to 257 °F]
ꢀ8 Vdc to 32 Vdc
Output type
normally open, current sinking
normally open/closed, current sinking
normally open/closed, current sinking
Proximity Sensors
21 FW Series
23 FW Series
5 FW Series
Description
one-piece ꢀ2 mm proximity sensor
one-piece 22.2 mm proximity sensor
target, special, proximity sensor
Operating frequency
Load current
2000 Hz
2000 Hz
n/a
20 mA
20 mA
n/a
Supply current
Housing material
Sensing face
25 mA
25 mA
n/a
stainless steel
stainless steel
stainless steel
stainless steel
stainless steel
stainless steel
Guaranteed actuation distance 250 Gauss
250 Gauss
n/a
Operating temperature range
Shock
-55 °C to ꢀ50 °C [-17 °F to 302 °F]
-55 °C to ꢀ25 °C [-17 °F to 257 °F]
-55 °C to ꢀ50 °C [-17 °F to 302 °F]
20 g
20 g
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
Supply voltage
BITE
ꢀ8 Vdc to 32 Vdc
ꢀ8 Vdc to 32 Vdc
yes
yes
Short circuit
Pressure proof
Reverse polarity
MTBF (hrs)
no
no
no
no
no
no
35000
ꢀꢀ5000
Output type
normally open, current sinking
normally open, current sinking
Safety and Productivity Solutions
3
Proximity Sensors Line Guide
922 Series
Proximity Sensors
922AA2Y-A6P-Z722A
922FS2-A6N-Z735A
Description
one-piece ꢀ5/32” proximity sensor
one-piece ꢀ2 mm proximity sensor
Dimension
ꢀꢀ.7 mm [0.41 in]
2000 Hz
ꢀ2 mm [0.47 in]
Operating frequency
Load current
Gd (mm)
2000 Hz
250 mA
250 mA
3.1
2.8
Guaranteed actuation distance 2 mm to 2.99 mm [0.0787 in to 0.ꢀꢀ77 in]
ꢀ mm to ꢀ.99 mm [0.039 in to 0.0783 in]
Operating temperature range
Shock
-55 °C to 85 °C [-17 °F to ꢀ85 °F]
-55 °C to 85 °C [-17 °F to ꢀ85 °F]
1 g ꢀꢀ ms ABD 0007
1 g ꢀꢀ ms ABD 0007
Supply voltage
BITE
ꢀ4 Vdc to 32.5 Vdc
ꢀ4 Vdc to 32.5 Vdc
no
no
Short circuit
yes
yes
Pressure proof
Reverse polarity
Output type
no
yes
no
no
normally open, current sourcing
normally open, current sourcing
M12 Proximity
Sensors
ZS-00361
932AB2W
Description
Load current
Sensing face
Gd (mm)
one-piece Mꢀ2 proximity sensor
one-piece Mꢀ2 proximity sensor
80 mA
200 mA
crastin (plastic)
2.9ꢀ
ceramic
1.8
Guaranteed actuation distance ꢀ mm to ꢀ.99 mm [0.039 in to 0.0783 in]
3 mm to 3.99 mm [0.ꢀꢀ8 in to 0.ꢀ57 in]
Operating temperature range
Shock
-25 °C to 85 °C [-ꢀ3 °F to ꢀ85 °F]
-40 °C to ꢀ00 °C [-40 °F to 2ꢀ2 °F]
400 g ꢀꢀ ms
ꢀ00 g 1 ms
Supply voltage
BITE
ꢀ4 Vdc to 33 Vdc
20 Vdc to 33 Vdc
no
no
Short circuit
yes
yes
Pressure proof
Reverse polarity
Insulation resistance
Output type
no
no
yes
yes
50 Mohm @ 500 Vdc
>50 Mohm @ 500 Vdc
normally open, current sourcing
normally open/closed, current sourcing
4
Safety and Productivity Solutions
M18 Proximity
Sensors
ZS-00351-01
932AA3W
Description
Load current
Sensing face
Gd (mm)
one-piece Mꢀ8 proximity sensor
one-piece Mꢀ8 proximity sensor
ꢀ00 mA
ceramic
7.27
≤200 mA up to 85 °C to ꢀ00 mA at ꢀ00 °C
ceramic
8.5
Guaranteed actuation distance 4 mm to 4.99 mm [0.ꢀ574 in to 0.ꢀ9141 in]
4 mm to 4.99 mm [0.ꢀ574 in to 0.ꢀ9141 in]
Operating temperature range
Shock
-35 °C to 13 °C [-3ꢀ °F to ꢀ45 °F]
-40 °C to ꢀ00 °C [-40 °F to 2ꢀ2 °F]
500 g 0.5 ms
ꢀ00 g 1 ms
Supply voltage
BITE
ꢀ2 Vdc to 32 Vdc
20 Vdc to 323 Vdc
yes
no
Short circuit
yes
yes
Pressure proof
Reverse polarity
Insulation resistance
Output type
no
no
yes
yes
ꢀ0 Mohm @ 500 Vdc
normally open, current sinking
>50 Mohm @ 500 Vdc
normally open, current sourcing
M30 Proximity
Sensors
ZS-00240-03B
ZS-00228-050
ZS-00341
Description
one-piece M30 proximity sensor
one-piece underwater proximity sensor
one-piece underwater proximity sensor
Load current
Housing material
Sensing face
Gd (mm)
200 mA
250 mA
≤ꢀ20 mA
stainless steel
stainless steel
ꢀ1
stainless steel
ceramic
polyethylene
overmoulded
ꢀ1
ꢀꢀ.14
ZS-0034ꢀ-0ꢀ: ≥0.8 mm% ZS-0034ꢀ-02:
≥2ꢀ.84 mm
Guaranteed actuation distance 5 mm to ꢀ0 mm [0.ꢀ97 in to 0.394 in]
5 mm to ꢀ0 mm [0.ꢀ97 in to 0.394 in]
Operating temperature range
Shock
-55 °C to 85 °C [-17 °F to ꢀ85 °F]
-40 °C to 85 °C [-40 °F to ꢀ85 °F]
-55 °C to 90 °C [-17 °F to ꢀ94 °F]
ꢀ00 g 1 ms
1 g ꢀꢀ ms
1 g ꢀꢀ ms
Supply voltage
BITE
ꢀ4 Vdc to 33 Vdc
ꢀ0 Vdc to 32.2 Vdc
ꢀ4 Vdc to 32.5 Vdc
no
no
no
Short circuit
yes
yes
yes
Pressure proof
Reverse polarity
Output type
no
no
yes
yes
yes
yes
normally open/closed, current sourcing
normally open, current sourcing
normally open, current sourcing
Safety and Productivity Solutions
5
ordnance, marine, mass transit, and
high performance industrial equipment.
Potential applications include aircraft
landing gear, gun turret position control,
and door and hatch open/closed
monitoring.
RDSC Series.
23 FW Series.
Features: Train detection without track
circuits • Zero speed and bi-directional
sensing • Duplex microprocessor system
• Relay outputs • Solid state technology
• RS 232 diagnostic output • Detects
standard rail wheels up to speeds of 281
mph • Connecting wires may be up to 2
miles only (>10,000 ft.) • Sealing to IP 68
Features: Hall-effect, magnetic field
sensitive • Triple channel • 9-wire dc
• Small housing • Stainless steel
Benefits: Enhanced reliability. Small profile.
Enhanced resistance to electromagnetic
interference. Competitive cost. Often
ideal for many locations on an aircraft, or
applications with severe shock, vibration,
temperature, and EMI environments.
Potential applications include door and
utility systems, high lift systems, hydraulic
systems, valves, engine/thrust reverser
systems, power generation systems,
environmental control systems, aircraft
landing gear, gun turret position control, and
door and hatch open/closed monitoring.
300 FW Series.
Features: Ferrous metal sensing
• Two-piece construction – stainless
steel bushing or flange mount sensors
and plug-in electronics card • Small
size housing • Stainless steel • Reverse
polarity • Designed to work in conjunction
with Honeywell Sensor Interface Card (405
FW Series) or Sensor Interface Module
(ZS-00380 Series)
Benefits: Enhanced reliability. Robust
design. Designed to provide fail-safe train
depart output. Interfaces with existing
crossing controls. Quick installation.
Allows proactive maintenance and fault
monitoring. Resistant to shock and
vibration. Wide temperature range. Polarity
independent – voltage may be reversed
and sensor still works. Short circuit,
overvoltage, and transient protection.
Greatly reduces problems with leaves,
rust, snow, salt, grit, dust, and oil on rails.
Designed for use in potential reversing
train applications.
Benefits: The combined sensor and
interface system offer highly enhanced
reliability. Mean time between failure in
excess of 500K hours when used with
the Sensor Interface Module (ZS-00380
Series). Sensitive electronics on plug-in
card for inside mounting. Enclosed in
a rugged hermetically sealed stainless
steel housing. Designed to withstand
temperature extremes and exposure to
salt, humidity, sand, dust, and corrosive
fluids such as skydrol and typical aircraft
fuels. Potential applications include aircraft
landing gear, flight control surfaces, and
aircraft door monitoring.
5 FW Series.
Features: Hall-effect, magnetic field
sensitive • Small housing • Stainless steel
Benefits: Enhanced reliability. Small
profile. Enhanced resistance to
electromagnetic interference. Competitive
cost. Often ideal for many locations on
an aircraft, or applications with severe
shock, vibration, temperature, and EMI
environments. Potential applications
include door and utility systems, high
lift systems, hydraulic systems, valves,
engine/thrust reverser systems, power
generation systems, environmental control
systems, aircraft landing gear, gun turret
position control, and door and hatch open/
closed monitoring.
100 FW Series.
Features: All metal sensing • Shielded
3-wire dc sinking (NPN) • Small housing
• Stainless steel • High level of electronics
protection • Leadwire or connector
termination
Benefits: Enhanced reliability. Environment-
proof, self-contained. Enclosed in a rugged
hermetically sealed stainless steel housing.
Designed to meet the requirements of
aerospace, ordnance, marine, mass
transit, and high performance industrial
equipment. Potential applications include
aircraft landing gear, gun turret position
control, and door and hatch open/closed
monitoring.
21 FW Series.
Features: Hall-effect, magnetic field
sensitive • Single channel • 3-wire dc
• Small housing • Stainless steel
922AA2Y-A6P-Z722A.
Benefits: Enhanced reliability. Small
profile. Enhanced resistance to
Features: All metal sensing • Stainless
steel • Small housing • High frequency
switching • High level of electronics
protection • Leadwire or connector
termination
electromagnetic interference. Competitive
cost. Often ideal for many locations on
an aircraft, or potential applications with
severe shock, vibration, temperature, and
EMI environments. Potential applications
include door and utility systems, high
lift systems, hydraulic systems, valves,
engine/thrust reverser systems, power
generation systems, environmental control
systems, aircraft landing gear, gun turret
position control, and door and hatch open/
closed monitoring.
200 FW Series.
Features: Hall-effect, magnetic field
sensitive • High frequency switching
• Shielded 3-wire dc sinking (NPN)
• Small housing • Stainless steel • High
level of electronics protection • Leadwire
or connector termination
Benefits: Environment-proof. Self-
contained. Operation by the Eddy Current
Killed Oscillator (ECKO) principle to
detect metallic objects passing in front of
the sensing face. Designed to meet the
requirements of aerospace, ordnance,
marine, and mass transit and high
performance industrial equipment. Potential
applications include aircraft landing gear,
gun turret position control, and door and
hatch open/closed monitoring.
Benefits: Enhanced reliability.
Environment-proof, self-contained.
Enclosed in a rugged hermetically sealed
stainless steel housing. Designed to
meet the requirements of aerospace,
6
Safety and Productivity Solutions
landing gear, gun turret position control,
and door and hatch open/closed
monitoring.
meet the requirements of aerospace,
ordnance, marine, and mass transit and
high performance industrial equipment.
Potential applications include aircraft
landing gear, gun turret position control,
and door and hatch open/closed
monitoring.
922FS2-A6N-Z735A.
Features: All metal sensing • Stainless
steel • Small housing • High pressure
capability (>350 bar) • High level of
electronics protection • Leadwire or
connector termination
ZS-00351-01.
Features: All metal sensing • Stainless
steel • Small housing • High level of
electronics protection • Built in test
function (BITE) • Leadwire or connector
termination
Benefits: Environment-proof. Self-
contained. Operation by the Eddy
Current Killed Oscillator (ECKO) principle
to detect metallic objects passing in
front of the sensing face. Designed to
meet the requirements of aerospace,
ordnance, marine, and mass transit and
high performance industrial equipment.
Potential applications include aircraft
landing gear, gun turret position control,
and door and hatch open/closed
monitoring.
ZS-00228-050.
Features: All metal sensing • High level
sealing by overmoulding • Enhanced
performance sealed and shielded cable
• Reverse polarity and short circuit
protection
Benefits: Environment-proof. Self-
contained. Operation by the Eddy
Current Killed Oscillator (ECKO) principle
to detect metallic objects passing in
front of the sensing face. Designed to
meet the requirements of aerospace,
ordnance, marine, and mass transit and
high performance industrial equipment.
Potential applications include aircraft
landing gear, gun turret position control,
and door and hatch open/closed
monitoring.
Benefits: Environment-proof. Self-
contained. Enclosed on rugged
hermetically sealed ceramic/stainless
steel housing and overmoulded to provide
complete encapsulation. Operation by
the Eddy Current Killed Oscillator (ECKO)
principle to detect metallic objects
passing in front of the sensing face.
Potential applications include submarine
control systems, submersible vehicles,
offshore underwater equipment, and
underwater pipeline controls.
ZS-00361.
Features: Hall-effect, magnetic field
sensitive • Stainless steel • Small housing
• High level of electronics protection
• High frequency switching • Leadwire or
connector termination
932AA3W.
Features: Hall-effect, magnetic field
sensitive • Stainless steel • Small housing
• High level of electronics protection
• High frequency switching • Leadwire or
connector termination
Benefits: Environment-proof. Self-
contained. Operation by the Eddy
Current Killed Oscillator (ECKO) principle
to detect metallic objects passing in
front of the sensing face. Designed to
meet the requirements of aerospace,
ordnance, marine, and mass transit and
high performance industrial equipment.
Potential applications include aircraft
landing gear, gun turret position control,
and door and hatch open/closed
monitoring.
ZS-00341.
Features: Ferrous metal sensing • All
stainless steel construction including
sensing face and laser welded connector
• High pressure capability up to 205
bar (system pressure) • Enhanced level
of electronics protection • Mean time
between failure is 126K hours
Benefits: Environment-proof. Self-
contained. Operation by the Eddy
Current Killed Oscillator (ECKO) principle
to detect metallic objects passing in
front of the sensing face. Designed to
meet the requirements of aerospace,
ordnance, marine, and mass transit and
high performance industrial equipment.
Potential applications include aircraft
landing gear, gun turret position control,
and door and hatch open/closed
monitoring.
Benefits: Environment-proof. Self-
contained. Enclosed on rugged
hermetically sealed ceramic/stainless
steel housing and overmoulded to provide
complete encapsulation. Operation
by the Eddy Current Killed Oscillator
(ECKO) principle to detect metallic
objects passing in front of the sensing
face. Designed to meet the requirements
of aerospace and marine applications.
Potential applications include aircraft
hydraulic systems, fighting vehicle engine/
transmission controls, and ship and
submarine hydraulic systems.
932AB2W.
Features: All metal sensing • Stainless
steel • Small housing • High level of
electronics protection • High frequency
switching • Leadwire or connector
termination
ZS-00240-03B.
Features: Hall-effect, magnetic field
sensitive • Stainless steel • Small housing
• High level of electronics protection
• High frequency switching • Leadwire or
connector termination
Benefits: Environment-proof. Self-
contained. Operation by the Eddy
Current Killed Oscillator (ECKO) principle
to detect metallic objects passing in
front of the sensing face. Designed to
meet the requirements of aerospace,
ordnance, marine, and mass transit and
high performance industrial equipment.
Potential applications include aircraft
Benefits: Environment-proof. Self-
contained. Operation by the Eddy
Current Killed Oscillator (ECKO) principle
to detect metallic objects passing in
front of the sensing face. Designed to
Safety and Productivity Solutions
7
Warranty. Honeywell warrants goods of
its manufacture as being free of defective
materials and faulty workmanship
during the applicable warranty period.
Honeywell’s standard product warranty
applies unless agreed to otherwise by
Honeywell in writing; please refer to your
order acknowledgement or consult your
local sales office for specific warranty
details. If warranted goods are returned to
Honeywell during the period of coverage,
Honeywell will repair or replace, at its
option, without charge those items it finds
defective. The foregoing is buyer’s
sole remedy and is in lieu of all other
warranties, expressed or implied,
including those of merchantability
and fitness for a particular purpose.
In no event shall Honeywell be liable
for consequential, special, or indirect
damages.
While we provide application assistance
personally, through our literature and
the Honeywell web site, it is up to the
customer to determine the suitability of the
product in the application.
Specifications may change without notice.
The information we supply is believed to
be accurate and reliable as of this printing.
However, we assume no responsibility for
its use.
To learn more about Honeywell Safety and
Productivity Solutions’ products, call
+1-815-235-6847 or 1-800-537-6945,
visit sensing.honeywell.com, or e-mail
inquiries to info.sc@honeywell.com
Honeywell Safety and Productivity Solutions
9680 Old Bailes Road
003703-2-EN IL50 GLO
Fort Mill, SC 29707
honeywell.com
August 2016
Copyright © 2016 Honeywell International Inc. All rights reserved.
相关型号:
©2020 ICPDF网 联系我们和版权申明