ZS-00350-01 [HONEYWELL]
Analog Circuit;
Honeywell 
Interactive Catalog Replaces Catalog Pages
Honeywell Sensing and Control has replaced
the PDF product catalog with the new
Interactive Catalog. The Interactive Catalog is
a power search tool that makes it easier to find
product information. It includes more
installation, application, and technical
Click this icon to try the new
information than ever before.
Interactive Catalog.
Sensing and Control
Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032
ZS-00350-01
ONE PART M12 PROXIMITY SENSOR
(INCORPORATING BUILT IN TEST)
Description :
Environment-proof self-contained proximity sensor enclosed in a
rugged hermetically sealed ceramic/stainless steel housing, designed
to meet the requirements of ground mobile and naval applications.
Operation by the Eddy Current Killed Oscillator (ECKO) principle,
which is used to detect metallic objects passing in front of the sensing
face. Once a target metal is detected, a trigger signal is produced
which is then passed through the output conditioning circuitry to give
a high or low output, depending on the sensor application.
Features :
l All metal sensing
l Integral VG95328 (MIL-C-26482) connector
l Built In Test function (BITE)
l High level of electronics protection
Typical Applications :
l Ammunition loading systems
l Gun turret position control
l Door and hatch open/closed monitoring
Dimensions in mm (for reference only)
b
Measured with target 12 x 12 x 1.0, 1.0110
Ordering Guide
Listing
Description
Normally open, current sinking
ZS-00350-01
18
Specifications
Sensing Characteristics :
Switching function
Level
Normally open, current sinking
1.66 mm
Specification (Note 1)
Minimum actuation distance
Maximum release distance
Switching hysteresis
4.16 mm
0.02 ≤ Sh ≤ 0.95 mm
≤ 0.042 mm
Reproduceability
Response time/actuation/BITE
Power on delay
≤ 2/10 ms
≤ 100 ms
Electrical Specification :
Operating voltage
12 to 32 V
≤ 8.4 Vss at 30 Hz - 10 kHz
70 Vs at 2 ms, 50 Vs at 50 ms
≤ 15 mA
Ripple
VG86916, 75, 4.4.2
VG86916, 75, 4.4.2
Impact potential/voltage peaks
Current consumption without load
Output-
Voltage drop
≤ 2.0 V at 80 mA
≤ 80 mA
≤ 100 µA
Yes
Current carrying capacity (oHmic)
Residual current
Short circuit protection
Reverse polarity protection
Yes
Input Characteristics :
BITE on input voltage
BITE off input voltage
Insertion loss
3.5 V ≤ Von ≤ 6.0
Voff ≤ 0.8 V
≤ 8 kOhm
Environmental Conditions :
Operating temperature
Storage temperature
Temperature shock
Humidity, storage
-35° to +63° C
-35° to +63° C
VG95332, B1. 22/23
> 1° C/min
95% at +40° C, 4x24 hours
95% at +44° C, 1x24 hours
1 cycle, 48 hours
IP54
VG95332, B1.6
VG95332, B1.5
VG95332, B1.14
Humidity, operation
Salt mist
Degree of protection
Vibration
1.5 geff 60-400 Hz
1.0 geff 400 - 2000 Hz
Bump
60 x 10 g at 6 ms
18 x 500 g at 0.5 ms
VG95332, B1.11
VG95332, B1.16
AWE II 10.02.92
Shock
Resistance to fuel
Aircraft fuel, oil, grease, protective agents
EMC :
Insulation resistance
≥ 10 mOhm at 500 V
≤ 5 mOhm at 100 mA
GKL2, 10 kHz - 100 MHz
GKL2, 30 Hz - 100 MHz
≤ 60 Vs at 2 ms, ≤ 2.5 Vss at 0.03-10 kHz
GKL2, 30 Hz - 200 kHz
GKL2, 15 kHz - 30 MHz
GKL2, 30 MHz - 100 MHz
GKL4, 30 Hz - 10 kHz
GKL4
Contact resistance
Guided interference transmissions
Guided interference voltage
Guided interference voltage
Magnetic flux density
VG95373, LA-01-G
VG95373, LA-02-G
VG95373, LA-03-G
VG95373, SA-01-G
VG95373, SA-02-G
VG95373, SA-04-G
VG95373, LF-01-G
VG95373, LF-04-G
DEF-STAN 59-41, DCS, 02
VG95373, LF-05-G
VG95373, SF-01-G
VG95373, SF-03-G
Magnetic field intensity
Electromagnetic field intensity
Immunity from noise, supply wiring
Impulse stability, supply wiring
Guided immunity
≤ 114 dB µA, 10 kHz - 100 MHz
GKL2
Electrostatic discharge
Magnetic immunity
GKL2, 10 KHZ - 200 kHz
GKL2, 30 MHz - 100 MHz
Electromagnetic immunity
Mean Time Between Failure prediction
Notes :
0.106 hrs x 106 at GM
MIL-HDBK-217 F
1. Unless otherwise stated, tested to or by similarity to Honeywell internal specifications
19
相关型号：
©2020 ICPDF网 联系我们和版权申明