HFD3-VI/4.5-2Z-L13S1R [HONGFA]

SUBMINIATURE HIGH INSULATION RELAY;


型号：	HFD3-VI/4.5-2Z-L13S1R
厂家：	HONGFA TECHNOLOGY
描述：	SUBMINIATURE HIGH INSULATION RELAY
文件：	总9页 (文件大小：1071K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SUBMINIATURE HIGH INSULATION RELAY

HFD3-VI

Features

Third generation Signal relay

●

2 Form A and 2 Form C configurations

File No.:E133481

High contact swtiching capacity:10mA 1000VDC/1500VDC

SMT and DIP types available

●Single side stable and latching type available

File No.:R 50433438

6kV dielectric strength (between coil and contacts),

Meet ITU-T K.21 requirement

●

2 pairs of NO contacts connected in series with contact

gap ≥1.5mm,product in accordance to IEC62776-1

available.

●

File No.:CQC19002231071

RoHS compliant

CONTACT DATA

CHARACTERISTICS

2A/2C

≤100m (10mA 30mVDC)

AgNi+ Au plated

Insulation resistance

1000M (500VDC)

1500VAC 1min

4000VAC 1min

Contact arrangement

Contact resistance¹⁾

Between open contacts

Dielectric

Between contact sets

strength

Contact material

2A 30VDC

1A 277VAC

10mA 1500VDC

10mA 1000VDC

Between coil&contact

Contact rating

(Res. load)

Surge withstand voltage

Between open contacts (10/160µs)

Between coil & contacts (1.2/50µs)

Between coil & contacts (10/700µs)

2.5kV

6kV

6kV²⁾

≤6ms

1100VAC/1500VDC(Two sets of open

contacts in series)

Max. switching voltage

600VAC/800VDC(Single contact)

Operate time (Set time)

Max. switching current

Max. switching power

Min. applicable load²⁾

Mechanical endurance

277VA / 60W

10mV 10uA

1 x 10⁷OPS

Release time (Reset time)

≤6ms

-40 to 85

Ambient temperature

-40 to 105

Humidity

5% to 85% RH

735m/s²

1 x 10⁵ops(Resistive load 85 2A 30VDC)

5 x 10⁴ops(Resistive load 85 1A 277VAC)

5 x 10⁴ops(Resistive load 105

Shock

Functional

980m/s²

resistance

Destructive

Electrical endurance

10mA 1000VDC)

3 x 10⁴ops(Resistive load 105

Vibration

Functional

Destructive

10Hz to 55Hz 3.3mm DA

10Hz to 55Hz 5.0mm DA

DIP、SMT

10mA 1500VDC)

resistance

Termination

Notes: 1) The data shown above are initial values.

2) Min. applicable load is reference value. Please perform the

confirmation test with the actual load before production since

reference value may change according to switching frequencies,

environmental conditions and expected contact resistance

and reliability.

Approx.2g

Unit weight

Moisture sensitivity levels (Only for

SMT type, JEDEC-STD-020)

3) Two sets of open contacts or two sets of closed contacts in Series.

Two sets of open contacts in Series:

MSL-3

Plastic

Construction

Notes: 1) The data shown above are initial values.

2) Product with 907 suffix, meet ITU-T K.21 requirement on

surge voltage.

3) Product with 888 suffix is for application at 105

4) Please see more details in the ordering information.

COIL

Approx.200mW

Approx.280mW ⁽²⁾

Approx.140mW

SAFETY APPROVAL RATINGS

Single side stable

1 coil latching

2A 30VDC,at 85

Coil power

UL/CUL

TUV

1A 277VAC,at 85

10mA 1000VDC, at105

10mA 1500VDC, at105

Approx.200mW ⁽²⁾

AgNi+Au plated

≤90K(2A Resistive load 85^oC environment)

Temperature rise

Notes: 1) The data shown above are initial values.

(2) Product with 907 suffix, meet ITU-T K.21 requirement on surge

voltage。

Notes: Only typical loads are listed above. Other load specifications

can be available upon request.

HONGFA RELAY

2020 Rev. 1.01

ISO9001、ISO/TS16949、ISO14001、OHSAS18001、IECQ QC 080000 CERTIFIED

COIL DATA

at 23

Single side stable

Pick-up

Voltage

VDC

Nominal

Power

Drop-out

Voltage

VDC

Nominal

Voltage

VDC

Coil

Resistance

Max.

Voltage

VDC⁴⁾

Coil

Code

min.¹⁾

max.¹⁾

approx.

HFD3-VI/1.5

HFD3-VI/2.4

HFD3-VI/3

HFD3-VI/4.5

HFD3-VI/5

HFD3-VI/6

HFD3-VI/9

HFD3-VI/12

HFD3-VI/24

1.5

2.4

≤1.13

≤1.8

≤2.25

≤3.38

≤3.75

≤4.5

≤6.75

≤9

≥0.15

≥0.24

≥0.3

≥0.45

≥0.5

≥0.6

≥0.9

≥1.2

≥2.4

11.2 x (1 10%)

28.8 x (1 10%)

45x (1 10%)

200

2.2

3.6

4.5

6.7

7.5

9.0

13.5

4.5

101 x (1 10%)

125 x (1 10%)

180 x (1 10%)

405x (1 10%)

720x (1 10%)

2880 x (1 10%)

≤18

1 coil latching

Nominal

Power

Reset

Voltage

VDC

Set

Voltage

VDC

Coil

Resistance

Nominal

Voltage

VDC

Max.

Voltage

VDC⁴⁾

Coil

Code

min¹.⁾

max.¹⁾

approx.

HFD3-VI/1.5-L1

HFD3-VI/2.4-L1

HFD3-VI/3-L1

HFD3-VI/4.5-L1

HFD3-VI/5-L1

HFD3-VI/6-L1

HFD3-VI/9-L1

HFD3-VI/12-L1

HFD3-VI/24-L1

1.5

2.4

≤1.13

≤1.8

≤2.25

≤3.38

≤3.75

≤4.5

≤6.75

≤9

≤1.13

≤1.8

≤2.25

≤3.38

≤3.75

≤4.5

≤6.75

≤9

16.1 x (1 10%)

41 x (1 10%)

140

2.7

4.3

64.3 x (1 10%)

145 x (1 10%)

178 x (1 10%)

257 x (1 10%)

579 x (1 10%)

1028x (1 10%)

4114 x (1 10%)

5.4

4.5

8.1

10.8

16.2

21.6

43.2

≤18

With 907 suffix

Single side stable

Drop-out

Voltage

VDC

Pick-up

Voltage

VDC

Nominal

Power

Nominal

Voltage

VDC

Coil

Resistance

Max.

Voltage

VDC⁴⁾

Coil

Code

min.

max.

approx.

HFD3-VI/1.5

HFD3-VI/2.4

HFD3-VI/3

HFD3-VI/4.5

HFD3-VI/5

HFD3-VI/6

HFD3-VI/9

HFD3-VI/12

HFD3-VI/24

1.5

2.4

≤1.13

≤1.8

≤2.25

≤3.38

≤3.75

≤4.5

≤6.75

≤9

≥0.15

≥0.24

≥0.3

≥0.45

≥0.5

≥0.6

≥0.9

≥1.2

≥2.4

8 x (1 10%)

20.6 x (1 10%)

32.1x (1 10%)

72.3 x (1 10%)

89.3 x (1 10%)

128.6 x (1 10%)

289.3x (1 10%)

514.3x (1 10%)

1920x (1 10%)

280

300

1.95

3.12

3.9

4.5

5.85

6.5

7.8

11.7

15.6

31.2

≤18

COIL DATA

at 23

With 907 suffix

1 coil latching

Reset

Voltage

VDC

Nominal

Power

Set

Voltage

VDC

Coil

Resistance

Nominal

Voltage

VDC

Max.

Voltage

VDC⁴⁾

Coil

Code

min.

approx.

max.

HFD3-VI/1.5-L1

HFD3-VI/2.4-L1

HFD3-VI/3-L1

HFD3-VI/4.5-L1

HFD3-VI/5-L1

HFD3-VI/6-L1

HFD3-VI/9-L1

HFD3-VI/12-L1

HFD3-VI/24-L1

1.5

2.4

≤1.13

≤1.8

≤2.25

≤3.38

≤3.75

≤4.5

≤6.75

≤9

≤1.13

≤1.8

≤2.25

≤3.38

≤3.75

≤4.5

≤6.75

≤9

11.2 x (1 10%)

28.8 x (1 10%)

45 x (1 10%)

200

1.95

3.12

3.9

4.5

101 x (1 10%)

125 x (1 10%)

180 x (1 10%)

405 x (1 10%)

720x (1 10%)

2880 x (1 10%)

5.85

6.5

7.8

11.7

15.6

31.2

≤18

Notes: 1)Only typcal loads are listed above.Other load specifications can be available upon request.

2)When user's requirements can't be found in the above table,special order allowed.

3)In case 5V of transistor drive circuit, it is recommended to use 4.5V type relay, and 3V to use 2.4V type relay.

4)Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time.

ORDERING INFORMATION

(XXX)

-2H -L1

HFD3-VI / 24

Type

Coil voltage

Sort

1.5, 2.4, 3, 4.5, 5, 6, 9, 12, 24VDC

2H: 2 Form A

2Z: 2 Form C

Nil: Single side stable

L1: 1 coil latching

Sort

Contact material

Terminal type

Packing style

3: AgNi+Gold plated

S: Standard SMT S1: Short terminal SMT Nil: DIP

R: Tape and reel packing (Only for SMT type)¹⁾

Nil: Tube packing(Only for DIP type)²⁾

(2)

(1)

XXX: Customer special requirement

For insitance: Product with 907 suffix, meet ITU-T K.21 requirement on surge voltage.

Product with 888 suffix is for application at 105

Product with 897 suffix is with pin distance at 4.58mm.

Nil: Standard

Special code³⁾

Notes: 1)R type (tape and reel) packing is moisture-proof which meets requirement of MSL-3. Please choose R type packing for SMT products.

For R type, the letter "R" will only be printed on packing tag but not on relay cover. Tube packing is normally not available for SMT

products unless specially requested by customer. But please note that tube packing is not moisture-proof so please bake the products

before use according to description of Notice 11 herewith. In addition, tube packaging will be adopted when the ordering quantity of R

type is equal to or less than 100 pieces unless otherwise specified.

2)The standard tube length is 624mm.

3)The customer special requirement express as special code after evaluating by Hongfa.The suffix 907, 888 & 897 are for special versions.

The ordering PN should be HFD3-VI/12-2Z-3(907) for instance.

4)For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while

placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products.

OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT

Unit: mm

PCB Layout

(Bottom view)

Outline Dimensions

Type 2H:

DIP type

2.54

7.5

0.5

1.15

0.25

10.16

2.54

7.5

Standard SMT type

0.5

5.08

9.2

1.15

10.16

2.54

7.5

Short terminal SMT type

0.5

5.08

7.5

1.15

10.16

Single side stable

1 coil latching

Wiring Diagram

(Bottom view)

Orientation mark

No energized condition

Reset condition

OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT

Unit: mm

PCB Layout

(Bottom view)

Outline Dimensions

Type 2Z:

DIP type

7.5

7.62

2.54

0.5

0.25

1.15

7.5

2.54

Standard SMT type

0.5

1.15

5.08

9.2

7.62

7.5

Short terminal SMT type

2.54

0.5

5.08

7.5

1.15

7.62

1 coil latching

Single side stable

Wiring Diagram

(Bottom view)

Orientation mark

No energized condition

Reset condition

OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT

Unit: mm

PCB Layout

(Bottom view)

Outline Dimensions

With 897 suffix

Type 2H:

2.54

7.5

DIP type

0.5

0.25

5.08

1.15

7.62

2.54

7.5

Standard SMT type

0.5

1.15

5.08

9.2

7.62

5.08

2.54

7.5

Short terminal SMT type

0.5

5.08

7.5

7.62

5.08

1.15

1 coil latching

Single side stable

Wiring Diagram

(Bottom view)

Orientation mark

No energized condition

Reset condition

Remark:1) The size of the pin of the external map of the product is the size before the tin(after the tin is touched), and the size of the installation

hole is the design size of the recommended PCB plate hole. The design size of the specific PCB plate hole can be mapped and adjusted

according to the product's physical object.;

2) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm

and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm.

3) The tolerance without indicating for PCB layout is always ±0.1mm.

TAPE PACKING

Unit: mm

Direction of Relay Insertion

Reel

4:1

Orientation mark

Cover tape

Feed direction

Embossed

carrier tape

Notes: 1) Packing: 400pcs/reel, 5 reels/carton.

2) MOQ for reel packing is 800pcs

adhesive tape

Cover tape

adhesive tape

Feed direction

during customer usage

at least 5 empty

relay positions

at least 5 empty

relay positions

Reel Dimensions

29.4

24.4

0.2

0.3

1.6

3×R1

0.5

TAPE PACKING

Unit: mm

Tape Dimensions (S type: Standard SMT)

A-A

B-B

0.1

0.5

0.1

。

max

。

0.2

(3.5)

。

max.

10.3

Tape Dimensions (S1 type: Short terminal SMT)

A-A

B-B

0.1

0.5

。

0.1

max

。

(3.5)

。

max.

0.2

8.2

10.3

CHARACTERISTIC CURVES

MAXIMUM SWITCHING POWER

Two sets of open/closed contacts in series

Singl contact

2000V

1500V

1000V

100V

ACResistiveLoad

DC ResistiveLoad

DCResistiveLoad

100V

30V

10V

30V

10V

10mV

100mA

10A

10uA 10mA

10mA

10A

10uA

100mA

Contact Current

CHARACTERISTIC CURVES

Temperature/Time profile of Reflow Soldering see below:

ENDURANCE CURVE

Temperature

(

)

500

Soldering

30VDC

Resistive Load

max.245

220

100

max. 3℃/s

180

150

Preheating

max. 6℃/s

277VAC Resistive Load

Time(s)

max. 60

max. 100

Contact Current (A)

max. 280

Test conditions:

1 form A or 1 form B

Resistive load, at 85^oC, 1s on 9s off.

Notice

1) This relay is highly sensitive polarized relay, if correct polarity is not applied to the coil terminals, the relay does not operate properly.

2) To avoid using relays under strong magnetic field which will change the parameters of relays such as pick-up voltage and drop-out voltage.

3) Relay is on the “reset” status when being released from stock, with the consideration of shock risen from transit and relay mounting, it should

be changed to the “set” status when application(connecting to the power supply). Please reset the relay to “set” or “reset” status on request.

4) Energizing coil with rated voltage is basic for normal operation of a relay, please make sure the energized voltage to relay coil have reached the

rated voltage. Regarding latching relay, in order to maintain the "set" or "reset" status, impulse width of the rated voltage applied to coil should

be more than 5 times of "set" or "reset" time.

5) For a monosteady state relay, after the relay is reliably operated, if it needs to be kept under pressure, make sure that the effective value of the

voltage is not less than 60 % of the rated voltage;

6) The relay may be damaged because of falling or when shocking conditions exceed the requirement.

7) For SMT products, validation with real application should be done before your series production, if the reflow-soldering temperature curve is out

of our recommendation. Generally, two-time reflow-soldering is not recommended for the relay. However, if two-time reflow-soldering is required,

a 60-min. interval should be guaranteed and a validation should be done before production.

8) Please use wave peak welding or manual welding for direct relay welding. If you need to return welding, please confirm the feasibility with us.

9) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.

10) Regarding the plastic sealed relay, we should leave it cooling naturally untill below 40^oC after welding, then clean it and deal with coating,

remarkably the temperature of solvents should also be controlled below 40^oC.Please avoid cleaning the relay by ultrasonic, avoid using the solvents

like gasoline, Freon, and so on, which would affect the configuration of relay or influence the environment.

11) About preferable condition of operation, storage and transportation, please refer to "Explanation to terminology and guidetines of relay".

12) Relays packaged in moisture barrier bags meet MSL-3 requirements. The relays should be stored at ambient conditions of ≤30℃and ≤60%

RH after they are removed from their packaging, and should be used within 168 hours. If the relays cannot be used within 168 hours, please

repack them or store them in a drying oven at 25℃±5℃, ≤10% RH. Otherwise, relays may be subjected to a soldering test to check their

performance, or they may be used after keeping them in an oven for 72 hours at with 50℃±5℃, ≤30% RH.

Disclaimer

The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice.

We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to

choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s

responsibility to determine which product should be used only.

HFD3-VI/4.5-2Z-L13S1R [HONGFA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E