HEDS-5120-F05 [HP]
Two and Three Channel Codewheels for Use with Agilent Optical Encoder Modules;
| 型号： | HEDS-5120-F05 |
| 厂家： | 
HEWLETT-PACKARD |
| 描述： | Two and Three Channel Codewheels for Use with Agilent Optical Encoder Modules |
| 文件： | 总15页 (文件大小：241K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
[ Obsolete product ]
Agilent has a new nam e
KeysightTechnologies.
Keysight Technologies Inc. is the world's leading electronic m easurem ent
com pany, transform ing today's m easurem ent experience through innovations in
wireless, m odular, and software solutions. W ith its HP and Agilent legacy,
Keysight delivers solutions in wireless com m unications, aerospace and defense
and sem iconductor m arkets with world-class platform s, software and
consistent m easurem ent science.
Alldatasheet.com
Two and Three Channel
Codewheels for Use with Agilent
Optical Encoder Modules
Technical Data
HEDS-51X0/61X0 Series
HEDG-512X/612X Series
HEDM-512X/61XX Series
Features:
• Codewheels Available in
Glass, Film, and Metal
• Available in Two Standard
Diameters
• Cost Effective
• Resolutions from 96 CPR to
2048 CPR
• For Use with HEDS-90XX/
91XX Series Two and Three
Channel Encoders
Each of the three codewheel
materials offers a certain
advantage. Metal codewheels are
the most versatile, with a tem-
perature rating up to 100°C,
resolution to 512 CPR (28 mm
diameter), as well as 2 and 3
channel outputs. Film codewheels
offer higher resolution (up to
1024 CPR on a 28 mm diameter)
with an operating temperature of
70°C. Glass codewheels combine
the best of film and metal, offer-
ing a temperature rating of 100°C
and resolutions to 1024 CPR on a
28 mm diameter.
Also See:
• HEDS-9000/HEDS-9100
Encoder Module Data Sheet
• HEDS-9000/9100/9200
Extended Resolution Encoder
Module Data Sheet
• HEDS-9040/9140 Three
Channel Encoder Module Data
Sheet
Description
Agilent Technologies offers a
wide variety of codewheels for
use with Agilent’s HEDS-9000,
HEDS-9100, HEDS-9040, and
HEDS-9140 series Encoder
Modules. Designed for many
environments, applications, and
budgets, Agilent codewheels are
available in Glass, Film, and
Metal. These codewheels are
available in resolutions from 96
Counts Per Revolution (CPR) to
1024 CPR on an 11 mm optical
radius and 500 to 2048 CPR on a
23.36 mm optical radius.
In addition, each material offers a
specific reliability rating. It is
important to consider the specific
application operating environ-
ment, long term operating
conditions, and temperature
ranges when choosing a code-
wheel material.
• HEDS-9700 Small Encoder
Module Data Sheet
2
Absolute Maximum
Ratings
It is important to consider the
environment in which the
codewheels will be used when
selecting a codewheel material. In
brief, metal codewheels are
rugged, but do not offer higher
resolution capabilities. Film
codewheels allow higher
resolution, but cannot endure the
same temperatures and high
humidity as metal. Glass
codewheels offer both high
temperature and higher
resolution, but are also more
expensive. Consider the following
rating table when choosing a
codewheel material.
HEDS-XXXX
Metal Codewheels
HEDM-XXXX
Film Codewheels
HEDG-XXXX
Glass Codewheels
Parameter
Storage
Symbol
TS
-40°C to +100°C
-40°C to +70°C
-40°C to +100°C
-40°C to +100°C
Temperature
Operating
T
A
-40°C to +100°C
-40°C to +70°C
Temperature
Humidity
non condensing
30,000 RPM
Velocity
30,000 RPM
12,000 RPM
Shaft Axial Play
± 0.25 mm
(± 0.010 in)
± 0.175 mm
(± 0.007 in)
± 0.175 mm
(± 0.007 in)
Shaft Eccentricity
Plus Radial Play
± 0.1 mm
(± 0.004 in) TIR
± 0.04 mm
(± 0.0015 in) TIR
± 0.04 mm
(± 0.0015 in) TIR
Acceleration
250,000 Rad/Sec2
250,000 Rad/Sec2
100,000 Rad/Sec2
Recommended Operating Conditions
HEDS-XXXX
HEDM-XXXX
HEDG-XXXX
Parameter
Metal Codewheels
Film Codewheels
Glass Codewheels
Maximum Count Frequency
100 kHz
200 kHz*
200 kHz
Shaft Perpendicularity
Plus Axial Play
± 0.25 mm
(± 0.010 in)
± 0.175 mm
(± 0.007 in)
± 0.175 mm
(± 0.007 in)
Shaft Eccentricity Plus
Radial Play
± 0.1 mm
(± 0.004 in) TIR
± 0.04 mm
(± 0.0015 in) TIR
± 0.04 mm
(± 0.0015 in) TIR
Note: Agilent Encoder Modules are guaranteed to 100 kHz, but can operate at higher frequencies. See Encoder Module Data Sheet for
specifications and output load recommendations.
*HEDM-6140 is guaranteed to 100 kHz with the HEDS-9040 #T00 module.
3
Encoding Characteristics
tolerances unless otherwise
specified. Values are for worst
error over a full rotation. Please
refer to Encoder Module Data
Sheet for definitions of Encoding
characteristics.
Encoding characteristics over
recommended operating range
and recommended mounting
Part Number
Description
Symbol
Min.
Typ.
Max.
Units
HEDS-51XX
Cycle Error
Position Error
∆C
∆θ
3
10
5.5
40
°e
min. of arc
HEDS-61XX
HEDM-512X
HEDM-61XX
HEDG-512X
HEDG-612X
Cycle Error
Position Error
∆C
∆θ
3
7
5.5
20
°e
min. of arc
Cycle Error
Position Error
∆C
∆θ
3
4
7.5
40
°e
min. of arc
Cycle Error
Position Error
∆C
∆θ
3
2
7.5
20
°e
min. of arc
Cycle Error
Position Error
∆C
∆θ
3
4
7.5
30
°e
min. of arc
Cycle Error
Position Error
∆C
∆θ
3
2
7.5
15
°e
min. of arc
Reliability
are also important. For example,
consistent, large temperature
swings over the life of the product
will affect the codewheel
depending on the material. The
following reliability table shows
results of lifetests under varying
conditions of temperature and
humidity.
In addition to the absolute
maximum specifications of
codewheels, the environment
characteristics of the application
performance characteristics
Glass Codewheel Tests
Test
Duration
1000 hours
500 hours
500 cycles
500 hours
Number of Parts
Number of Failures
Storage at 100°C
44
10
98
43
0
0
0
0
Rotating at 100°C
Temperature Cycle: -40°C to +100°C
Temperature/Humidity: 85°C/85% R.H.
Film Codewheel Tests
Test
Duration
1000 hours
500 hours
500 cycles
1000 cycles
1000 cycles
500 cycles
Number of Parts
Number of Failures
Storage at 70°C
118
10
66
64
46
50
0
0
0
0
0
0
Rotating at 70°C
Temperature Cycle: -40°C to +70°C
Temperature Cycle: +20°C to +40°C
Temperature Cycle: +20°C to +55°C
Temperature Cycle: +20°C to +70°C
4
Mounting Rotary
Encoders with
Codewheels
There are two orientations for
mounting the Agilent encoder
module and Agilent codewheel.
Figure 1a shows mounting the
module with side A as the
mounting the module with side B
as the mounting plane. When
assembling the encoder and
codewheel, it is important to
maintain the tolerances of Side A
of the module, and the image side
of the codewheel. See module
Data Sheets for these tolerances.
mounting plane. Figure 1b shows
IMAGE SIDE
OF CODEWHEEL
MODULE SIDE B
MODULE SIDE A
MODULE SIDE A
MODULE SIDE B
IMAGE SIDE
OF CODEWHEEL
Figure 1b.
Figure 1a.
*Please note that the image side of the codewheel must always be facing the module Side A.
Mounting with Module
Side B as the Mounting
Plane, using Agilent
Assembly Tools
Agilent offers centering tools and
gap setting tools only for the case
when the module is mounted with
Side B down. Please refer to the
Ordering Information Table to
choose the correct assembly
tools.
Mounting with Module
Side A as the Mounting
Plane
Mounting a high resolution or
three channel encoder with
Module Side A as the mounting
plane requires alignment pins in
the motor base. These alignment
pins provide the necessary
centering of the module with
respect to the center of the motor
shaft. In addition to centering, the
codewheel gap is also important.
Please refer to the respective
encoder data sheet for necessary
mounting information.
5
Assembly Instructions Using
Agilent Assembly Tools
Instructions
1. Place codewheel on shaft.
2. Set codewheel height:
4. Slide the HEDS-8905 or HEDS-
8906 centering tool over
codewheel hub and onto
module as shown in Figure 3.
The pins of the alignment tool
should fit snugly inside the
alignment recesses of the
module.
shim should not contact the
codewheel boss.
(b) Push codewheel down
against gap setting shim. The
codewheel is now at the proper
height.
(a) Place the correct gap
setting tool (per Ordering
Information Table) on motor
base, flush up against the
motor shaft as shown in Figure
2. The shim has two different
size steps. Choose the one that
most closely matches the width
of the codewheel boss. The
(c) Tighten codewheel
setscrew.
5. While holding alignment tool in
place, tighten screws down to
secure module.
3. Insert mounting screws
through module and thread
into the motor base. Do not
tighten screws.
6. Remove alignment tools.
IMAGE SIDE OF CODEWHEEL
CENTERING TOOL
CODEWHEEL
ALIGNING RECESSES
MODULE SIDE A
CODEWHEEL
MODULE SIDE A
GAP SETTING SHIM
MODULE SIDE B
MODULE SIDE B
Figure 2. Alignment Tool is Used to Set Height of
Codewheel.
Figure 3. Alignment Tool is Placed over Shaft and onto
Codewheel Hub. Alignment Tool Pins Mate with
Aligning Recesses on Module.
6
Mechanical Drawings
5.94
(0.234)
MAX.
# 2-56 SETSCREW
25.40 (1.000) MAX.
USE 0.035" HEX WRENCH
1.80
(0.071)
50.0 (1.97)
DIA.
MOUNTING
BOSS
MOUNTING BOSS –
NOT USED ON
6 mm & 1/4"
I.D. HUBS
26.67
(1.050)
MAX.
18.0
(0.71)
12.70
(0.500)
MAX.
10.16
(0.400)
# 2-56 SETSCREW
USE 0.035"
HEX WRENCH
8.99
(0.354)
MAX.
3.58
(0.141)
0.04 MAX.
0.054
0.20
(0.008)
DIMENSIONS IN MM (INCHES)
DIMENSIONS IN MM (INCHES)
Figure 4. HEDS-5120 Codewheel.
Figure 5. HEDS-6100 Codewheel.
5.95
(0.234)
MAX.
1.80
(0.071)
25.7 (1.01)
DIA. MAX.
MOUNTING BOSS
12.70
(0.500)
MAX.
SETSCREW
10.16
(0.400)
INDEX PULSE
REFERENCE
MARKER
INDEX PULSE
POSITION
130° ± 5°
TYPICAL
3.58
(0.141)
R
= 11.00 mm (0.433 in.)
OP
DIMENSIONS IN MM (INCHES)
Figure 6. HEDS-5140 Codewheel Used with HEDS-9140.
7
# 2-56 SETSCREW
USE 0.035" HEX WRENCH
50.6 (1.99)
DIA. MAX.
MOUNTING BOSS
26.67
(1.050)
MAX.
SETSCREW
18.0
(0.71)
INDEX PULSE
REFERENCE
MARKER
INDEX PULSE
POSITION
130°
TYPICAL
8.99
(0.354)
MAX.
R
= 23.36 mm (0.920 in.)
OP
DIMENSIONS IN MM (INCHES)
Figure 7. HEDS-6140 Codewheel Used with HEDS-9040.
4.2 MAX.
5.9 MAX.
8.5 MAX.
2-56 SETSCREW
USE 0.035" HEX WRENCH
0.18
0.18
(0.007)
(0.007)
15.3 MAX.
12.6 MAX.
22.50
(0.886)
36.5
MAX.
10.2 MAX.
18 MAX.
2-56 SETSCREW
USE 0.035" HEX WRENCH
50.48 DIA.
(1.980) MAX.
25.56 DIA.
(1.006) MAX.
ARTWORK SIDE
(HEDM-6121)
ARTWORK SIDE
(HEDM-6120)
ARTWORK SIDE
(HEDM-5121)
ARTWORK SIDE
(HEDM-5120)
DIMENSIONS IN mm (INCHES)
DIMENSIONS IN mm (INCHES)
Figure 8. HEDM-5120 Codewheel/HEDM-5121 Codewheel.
Figure 9. HEDM-6120 Codewheel/HEDM-6121 Codewheel.
8
2-56 SETSCREW
USE 0.035" HEX WRENCH
2-56 SETSCREW
USE 0.035" HEX WRENCH
0.55
(0.022)
0.55
5.51
(0.022)
(0.217)
8.43
(0.332)
25.4 MAX.
22.6 MAX.
12.6 MAX.
10.2 MAX.
17.98
(0.708)
MAX.
ARTWORK SIDE
(HEDG-6121)
ARTWORK SIDE
(HEDG-6120)
ARTWORK SIDE
(HEDG-5120)
25.56 DIA.
(1.006) MAX.
ARTWORK SIDE
(HEDG-5121)
DIA.
MAX.
50.48
(1.987)
DIMENSIONS IN mm (INCHES)
DIMENSIONS IN mm (INCHES)
Figure 10. HEDG-5120 Codewheel/HEDG-5121 Codewheel.
Figure 11. HEDG-6120 Codewheel/HEDG-6121 Codewheel.
2-56 SETSCREW
USE 0.035" HEX WRENCH
0.18
(0.007)
8.43
(0.332)
50.48 DIA.
(1.987) MAX.
SETSCREW
22.50
MAX.
36.5
(0.886)
INDEX PULSE
POSITION
130°
TYPICAL
ARTWORK SIDE
(HEDM-6141)
ARTWORK SIDE
(HEDM-6140)
DIMENSIONS IN mm (INCHES)
Figure 12. HEDM-6140 Codewheel/HEDM-6141 Codewheel.
9
Ordering Information Encoder Modules, Codewheel and Assembly Tools
Metal Codewheels
0
0
Rop = 11 mm,
2 Channels
Assembly Tools
Centering Gap-Setting
HEDS-9100 Option
modules
HEDS-5120 Option
codewheels
HEDS-
8905
HEDS-
8901
Resolution
Shaft Diameter
01 - 2 mm
02 - 3 mm
03 - 1/8 in.
04 - 5/32 in.
05 - 3/16 in.
06 - 1/4 in.
11 - 4 mm
14 - 5 mm
12 - 6 mm
13 - 8 mm
(Cycles/Rev)
K - 96 CPR
C - 100 CPR
D - 192 CPR
E - 200 CPR
F - 256 CPR
G - 360 CPR
H - 400 CPR
A - 500 CPR
I - 512 CPR
01 02 03 04 05 06 08 09 10 11 12 13 14
HEDS-5120#
A
C
D
E
F
G
H
I
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
K
0
0
Rop = 11 mm,
3 Channels
Assembly Tools
Centering Gap-Setting
HEDS-9140 Option
modules
HEDS-5140 Option
codewheels
HEDS-
8905
HEDS-
8905
Resolution
(Cycles/Rev)
Shaft Diameter
02 - 3 mm
03 - 1/8 in.
11 - 4 mm
14 - 5 mm
C - 100 CPR
E - 200 CPR
F - 256 CPR
G - 360 CPR
A - 500 CPR
I - 512 CPR
04 - 5/32 in. 12 - 6 mm
05 - 3/16 in. 13 - 8 mm
06 - 1/4 in.
01 02 03 04 05 06 08 09 10 11 12 13 14
HEDS-5140
A
C
E
F
G
I
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
10
Ordering Information (Cont’d.)
0
0
Rop = 23 mm,
2 Channels
Assembly Tools
Centering Gap-Setting
HEDS-9000 Option
modules
HEDS-6100 Option
codewheels
HEDS-
8906
HEDS-
8901
Resolution
Shaft Diameter
06 - 1/4 in.
08 - 3/8 in.
09 - 1/2 in.
10 - 5/8 in.
11 - 4 mm
12 - 6 mm
13 - 8 mm
(Cycles/Rev)
A - 500 CPR
B - 1000 CPR
01 02 03 04 05 06 08 09 10 11 12 13 14
HEDS-6100#
A
B
*
*
*
*
*
*
*
0
Rop = 23.36 mm,
3 Channels
Assembly Tools
Centering Gap-Setting
HEDS-9040 Option
modules
0
HEDS-6140 Option
codewheels
HEDS-
8906
HEDS-
8906
Resolution
(Cycles/Rev)
Shaft Diameter
06 - 1/4 in.
08 - 3/8 in.
09 - 1/2 in.
10 - 5/8 in.
11 - 4 mm
12 - 6 mm
13 - 8 mm
B - 1000 CPR
J - 1024 CPR
01 02 03 04 05 06 08 09 10 11 12 13 14
HEDS-6140#
B
J
*
*
*
*
*
*
*
*
*
*
*
Note:
1. For the lower resolution, two channel encoders, (11 mm ≤ 512 CPR; 23.36 mm ≤ 1024 CPR) the centering tool and gap-setting shim
are not necessary, but sometimes helpful in an assembly process.
11
Ordering Information (Cont’d.)
Film Codewheels
Rop = 11 mm,
2 Channels
Assembly Tools
Centering Gap-Setting
HEDS-9000
modules
Option
HEDM-512
codewheels
Option
0
0
HEDS-
8905
HEDS-
8901
Resolution
(Cycles/Rev)
Artwork Orientation
Shaft Diameter
02 - 3 mm
06 - 1/4 in.
11 - 4 mm
0 - Artwork on hub
side (use when
module side B is
down)
B - 1000 CPR
J - 1024 CPR
12 - 6 mm
1 - Artwork opposite
hub side (use when
module side A is
down)
01 02 03 04 05 06 08 09 10 11 12 13 14
HEDM-5120#
HEDM-5121
B
*
*
*
*
*
*
*
J
B
J
*
Rop = 23.36 mm,
2 Channels
Assembly Tools
Centering Gap-Setting
HEDS-9000
modules
Option
HEDM-612
codewheels
Option
0
0
HEDS-
8906
HEDS-
8906
Resolution
(Cycles/Rev)
Artwork Orientation
0 - Artwork on hub
side (use when
module side B is
down)
Shaft Diameter
06 - 1/4 in.
08 - 3/8 in.
12 - 6 mm
13 - 8 mm
T - 2000 CPR
U - 2048 CPR
1 - Artwork opposite
hub side (use when
module side A is
down)
01 02 03 04 05 06 08 09 10 11 12 13 14
HEDM-6120#
HEDM-6121#
T
U
T
*
*
*
*
*
*
12
Ordering Information (Cont’d.)
Rop = 23.36 mm,
3 Channels
Assembly Tools
Centering Gap-Setting
HEDS-9040
modules
Option
HEDM-614
codewheels
Option
0
0
HEDS-
8906
HEDS-
8906
Resolution
(Cycles/Rev)
Artwork Orientation*
Shaft Diameter
0 - Artwork on hub
side (use when
module side B is
down)
10 - 5/8 in.
12 - 6 mm
T - 2000 CPR
1 - Artwork opposite
hub side (use when
module side A is
down)
01 02 03 04 05 06 08 09 10 11 12 13 14
HEDM-6140#
HEDM-6141#
T
*
T
*
Glass Codewheels
Rop = 11 mm,
2 Channels
Assembly Tools
Centering Gap-Setting
HEDS-9100
modules
HEDG-512
codewheels
Option
Option
0
0
HEDS-
8905
HEDS-
8932
Resolution
(Cycles/Rev)
Artwork Orientation
0 - Artwork on hub
side (use when
module side B is
down)
Shaft Diameter
06 - 1/4 in.
14 - 5 mm
B - 1000 CPR
J - 1024 CPR
1 - Artwork opposite
hub side (use when
module side A is
down)
01 02 03 04 05 06 08 09 10 11 12 13 14
HEDG-5121#
B
J
*
*
*
13
Ordering Information (Cont’d.)
Rop = 23.36 mm,
2 Channels
Assembly Tools
Centering Gap-Setting
HEDS-9000
modules
Option
HEDG-612
codewheels
Option
0
0
HEDS-
8906
HEDS-
8932
Resolution
(Cycles/Rev)
Shaft Diameter
12 - 6 mm
T - 2000 CPR
U - 2048 CPR
01 02 03 04 05 06 08 09 10 11 12 13 14
HEDG-6120#
U
*
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
April 26, 2001
Obsoletes 5965-5891E (11/99)
5988-2630EN
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明