1660STA-DC [HRS]
Connector Accessory, Bracket, ROHS COMPLIANT;
| 型号： | 1660STA-DC |
| 厂家： | 
HRS |
| 描述： | Connector Accessory, Bracket, ROHS COMPLIANT 连接器 连接器支架 |
| 文件： | 总31页 (文件大小：1630K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
SUMICON 1600 SERIES RECTANGULAR CONNECTORS
The SUMICON 1600 series are multi-contact connec-
tors designed by Hirose. 8, 12, 16, 20, 24, 28, 34, 45
and 60-contact models available (same as the 1300
series). The connector units are available in three
types: soldering, wrapping, and crimping. Accessories
are C case, CA case, CBA case, ST stopper, STA stop-
per, and STB stopper, By combining the many options
noted above, the SUMICON 1600 series connectors
meet a wide variety applications.
Standard Type
General
In the SUMICON 1600 series, the connector unit is
completely separated from the accessories such as the
cases and stoppers to diversify the specificaions and
facilitate wiring connection. The SUMICON 1600
series are specified in the NTT specifications No.1931.
Material and Finish
Part
Material
Finish
Blue
Electrical Characteristics
Glass filled
Item
Standard
Insulator
diallylphthalate resin
Contact
Resistance
7mΩ max.
at DC 1A
Male Terminal
Brass
Type A: Silver-plated
Type G: Gold-plated
Female Terminal
Phosphor bronze
Insulation
Resistance
1000MΩ min.
at DC 500V
NTT spec: ABS resin,
2.5PB 6.0/2.0（color）
Plug Case
ABS resin（black）
Steel
Withstand
Voltage
AC 1000V for 1 minute
Stopper Bracket
Nickel plating
Current Rating
Voltage Rating
3A
300V AC
Wire Wrapping Specifications
AWG
26
28
30
Applicable
wire（mm）
Applicable
wire
0.41
0.32
0.75
0.26
Max. coating
O.D（. mm）
0.95
0.6
Ordinary
wrapping
Coating
one wrap
Coating
one wrap
Wrapping method
Effective number of wrappings
about 8
about 8
2 wrap
about 9
Number of wrappings
per terminal
Ordering Information
－
－ （ ）
C □
P
W
16 34
□
A
(1) (2)
(3) (4) (5) (6)
(7) (8) (9)
(1) Shape of terminal opening
P: Male terminal
C: Plug case
ST: Stopper bracket with horizontal cable inlet opening
J: Jack Case
S: Female terminal
(2) Terminal connection method
No sign: Soldering
H: Handle
DB: Deep bracket
W: Wrapping C: Crimp
(3) Series No.
(8) Serial signs for accessories
Each accessory (C, ST, J, H, DB) is provided with sequence of
upper-case. alphabetic characters.
Sequence: No sign, A, B, C...
16: 1600 series
(4) Number of contacts 34: 34 contacts
(5) Serial sign for connctor units
Accessories, C, ST, or J followed by ﾒno signﾓ : Side lock
types
Provided with a sequence of upper-case alphabetic charac-
ters.
Accessories, C and ST followed By A: Top touch lock type
Note: The space for no sign is filled sequentially.
(9) Special specification, ( ) is filled with a serial number,
except for the case and bracket, for which the following ap-
ply.
No sign or sign other than W: Soldering
Sequence: No sign, B, C, D, E ...
(6) Plating
A: Silver-plated
G: Gold-plated
(51): Bracket only
(50): Case only
(7) Signs for accessories
105
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Cross Reference to NTT No.
Type
NTT No.
Short Form
HRS No.
Part No.
Type
NTT No.
Short Form
HRS No.
Part No.
CN-3320GLWPMSA 20GLWPMSA CL216-0247-5-51 P-1620BA-CA（51）
CN-4028GLWPMSA 28GLWPMSA CL216-0249-0-51 P-1628BA-CA（51）
CN-4534GLWPMSA 34GLWPMSA CL216-0250-0-51 P-1634BA-CA（51）
CN-5445GLWPMSA 45GLWPMSA CL216-0251-2-51 P-1645BA-CA（51）
CN-6760GLWPMSA 60GLWPMSA CL216-0252-5-51 P-1660BA-CA（51）
CN-3320GLWPFSA 20GLWPFSA CL216-0153-3-51 P-1620A-CA（51）
CN-3724GLWPFSA 24GLWPFSA CL216-0154-6-51 P-1624A-CA（51）
CN-4028GLWPFSA 28GLWPFSA CL216-0155-9-51 P-1628A-CA（51）
CN-4534GLWPFSA 34GLWPFSA CL216-0126-0-51 P-1634A-CA（51）
CN-5445GLWPFSA 45GLWPFSA CL216-0127-3-51 P-1645A-CA（51）
CN-6760GLWPFSA 60GLWPFSA CL216-0128-6-51 P-1660A-CA（51）
CN-3724GJMSA 24GJMSA CL216-0254-0-51 P-1624BA-STA（51）
CN-5445GJMSA
CN-6760GJMSA
45GJMSA CL216-0257-9-51 P-1645BA-STA（51）
60GJMSA CL216-0258-1-51 P-1660BA-STA（51）
CN-3320G2JMSA 20G2JMSA CL216-0292-0-51 PW-1620BA-STA（51）
CN-3724G2JMSA 24G2JMSA CL216-0293-2-51 PW-1624BA-STA（51）
CN-4028G2JMSA 28G2JMSA CL216-0294-5-51 PW-1628BA-STA（51）
CN-4534G2JMSA 34G2JMSA CL216-0296-0-51 PW-1634BA-STA（51）
CN-6760G2JMSA 60G2JMSA CL216-0298-6-51 PW-1660BA-STA（51）
Plug
Receptacle
CN-3320GJFSA
CN-3724GJFSA
CN-4028GJFSA
20GJFSA
24GJFSA
28GJFSA
CL216-0151-8-51
CL216-0148-3-51
CL216-0152-0-51
S-1620A-STA（51）
S-1624A-STA（51）
S-1628A-STA（51）
CN-4028G2JFSA 28G2JFSA CL216-0313-8-51 SW-1628A-STA（51）
CN-4534G2JFSA 34G2JFSA CL216-0299-9-51 SW-1634A-STA（51）
CN-5445G2JFSA 45G2JFSA CL216-0300-6-51 SW-1645A-STA（51）
CN-6760G2JFSA 60G2JFSA CL216-0301-9-51 SW-1660A-STA（51）
Receptacle CN-4028GJMSA 28GJMSA CL216-0255-3-51 P-1628BA-STA（51）
CN-4534GJMSA 34GJMSA CL216-0256-6-51 P-1634BA-STA（51）
Note: NTT Types are all assembled with connector inserts and plug shells or stopper brackets.
106
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Soldering Eyelet Pin Connector
Male Connector
Solder Hole
Unit: mm
A Type
G Type
No. of
Pin
A
B
C
D
E
RoHS
HRS No.
Part No.
HRS No.
Part No.
8
CL216-0171-5-09
CL216-0172-8-09
CL216-0173-0-09
CL216-0174-3-09
CL216-0175-6-09
CL216-0176-9-09
CL216-0177-1-09
CL216-0178-4-09
CL216-0179-7-09
P-1608BA（09）
P-1612BA（09）
P-1616BA（09）
P-1620BA（09）
P-1624BA（09）
P-1628BA（09）
P-1634BA（09）
P-1645BA（09）
P-1660BA（09）
CL216-0180-6-09
CL216-0181-9-09
CL216-0182-1-09
CL216-0183-4-09
CL216-0184-7-09
CL216-0185-0-09
CL216-0186-2-09
CL216-0187-5-09
CL216-0188-8-09
P-1608BG（09） 25 19 10 13
P-1612BG（09） 30 24 10 18
P-1616BG（09） 35 29 10 23
8
8
8
12
16
20
24
28
34
45
60
P-1620BG（09） 33 27 13 21 11
P-1624BG（09） 37 31 13 25 11 YES
P-1628BG（09） 40 34 13 28 11
P-1634BG（09） 45 39 13 33 11
P-1645BG（09） 54 48 13 42 11
P-1660BG（09） 67 61 13 55 11
P-1634BA（09）
Female Connector
Solder Hole
Unit: mm
A Type
G Type
No. of
Pin
A
B
C
D
E
RoHS
HRS No.
Part No.
HRS No.
Part No.
8
CL216-0001-5-09
CL216-0002-8-09
CL216-0003-0-09
CL216-0004-3-09
CL216-0005-6-09
CL216-0006-9-09
CL216-0007-1-09
CL216-0008-4-09
CL216-0009-7-09
S-1608A（09）
S-1612A（09）
S-1616A（09）
S-1620A（09）
S-1624A（09）
S-1628A（09）
S-1634A（09）
S-1645A（09）
S-1660A（09）
CL216-0055-4-09
CL216-0056-7-09
CL216-0057-0-09
CL216-0058-2-09
CL216-0059-5-09
CL216-0060-4-09
CL216-0061-7-09
CL216-0062-0-09
CL216-0063-2-09
S-1608G（09） 25 19 10 13
S-1612G（09） 30 24 10 18
S-1616G（09） 35 29 10 23
8
8
8
12
16
20
24
28
34
45
60
S-1620G（09） 33 27 13 21 11
S-1624G（09） 37 31 13 25 11 YES
S-1628G（09） 40 34 13 28 11
S-1634G（09） 45 39 13 33 11
S-1645G（09） 54 48 13 42 11
S-1660G（09） 67 61 13 55 11
S-1634A（09）
107
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Wire Wrapping Pin Connector
Male Connector
Wrap Post 0.5×0.7
Unit: mm
A Type
G Type
No. of
Pin
A
B
C
D
E
RoHS
HRS No.
Part No.
HRS No.
Part No.
8
CL216-0198-1-09
CL216-0199-4-09
CL216-0200-1-09
CL216-0201-4-09
CL216-0202-7-09
CL216-0203-0-09
CL216-0204-2-09
CL216-0205-5-09
CL216-0206-8-09
PW-1608BA（09） CL216-0216-1-09
PW-1612BA（09） CL216-0217-4-09
PW-1616BA（09） CL216-0218-7-09
PW-1620BA（09） CL216-0219-0-09
PW-1624BA（09） CL216-0220-9-09
PW-1628BA（09） CL216-0221-1-09
PW-1634BA（09） CL216-0222-4-09
PW-1645BA（09） CL216-0223-7-09
PW-1660BA（09） CL216-0224-0-09
PW-1608BG（09） 25 19 10 13
PW-1612BG（09） 30 24 10 18
PW-1616BG（09） 35 29 10 23
8
8
8
12
16
20
24
28
34
45
60
PW-1620BG（09） 33 27 13 21 11
PW-1624BG（09） 37 31 13 25 11 YES
PW-1628BG（09） 40 34 13 28 11
PW-1634BG（09） 45 39 13 33 11
PW-1645BG（09） 54 48 13 42 11
PW-1660BG（09） 67 61 13 55 11
PW-1634BA（09）
Female Connector
Wrap Post 0.5×0.7
Unit: mm
A Type
G Type
No. of
Pin
A
B
C
D
E
RoHS
HRS No.
Part No.
HRS No.
Part No.
8
CL216-0189-0-09
CL216-0190-0-09
CL216-0191-2-09
CL216-0192-5-09
CL216-0193-8-09
CL216-0194-0-09
CL216-0195-3-09
CL216-0196-6-09
CL216-0197-9-09
SW-1608A（09）
SW-1612A（09）
SW-1616A（09）
SW-1620A（09）
SW-1624A（09）
SW-1628A（09）
SW-1634A（09）
SW-1645A（09）
SW-1660A（09）
CL216-0207-0-09
CL216-0208-3-09
CL216-0209-6-09
CL216-0210-5-09
CL216-0211-8-09
CL216-0212-0-09
CL216-0213-3-09
CL216-0214-6-09
CL216-0215-9-09
SW-1608G（09） 25 19 10 13
SW-1612G（09） 30 24 10 18
SW-1616G（09） 35 29 10 23
8
8
8
12
16
20
24
28
34
45
60
SW-1620G（09） 33 27 13 21 11
SW-1624G（09） 37 31 13 25 11 YES
SW-1628G（09） 40 34 13 28 11
SW-1634G（09） 45 39 13 33 11
SW-1645G（09） 54 48 13 42 11
SW-1660G（09） 67 61 13 55 11
SW-1634A（09）
108
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Side Touch Lock Type Plug Shell
Unit: mm
No. of Pin
HRS No.
Part No.
P-1608A-C（50） 29 20 14.5 42 7.5 7.5 12.5 12.5
P-1612A-C（50） 34 20 14.5 43.5 7.5 13.5 13.5
A
B
C
D
E
F
G
H RoHS
8
CL216-0028-1-50
CL216-0029-4-50
CL216-0030-3-50
CL216-0031-6-50
CL216-0032-9-50
CL216-0033-1-50
CL216-0034-4-50
CL216-0035-7-50
CL216-0036-0-50
12
16
20
24
28
34
45
60
9
P-1616A-C（50） 39 20 14.5 46 7.5 11.5 14.5 14.5
P-1620A-C（50） 37 23 17.5 45.5 11 11 14.5 14.5
P-1624A-C（50） 41 23 17.5 46.5 11 12 15 15 YES
P-1628A-C（50） 44 23 17.5 47.5 11 13 15.5 15.5
P-1634A-C（50） 49 23 17.5 50.5 11 16 17 17
P-1645A-C（50） 58 23 17.5 54.5 11 19 18.5 19.5
P-1660A-C（50） 71 23 17.5 59.5 11 24 21 22
Note: All these products are plug cases only. Order connector units separately.
The cases can be used for both male and female connector units. The cases
marked with an asterisk are of standard specifications.
P-1634A-C（50）
Side Touch Lock Type Receptacle Bracket
Unit: mm
E RoHS
No. of Pin
HRS No.
Part No.
A
B
C
D
8
CL216-0046-3-51
CL216-0047-6-51
CL216-0048-9-51
CL216-0049-1-51
CL216-0050-0-51
CL216-0051-3-51
CL216-0052-6-51
CL216-0053-9-51
CL216-0054-1-51
P-1608A-ST（51） 27 19 13.6 9.2 15.5
P-1612A-ST（51） 32 24 13.6 9.2 15.5
P-1616A-ST（51） 37 29 13.6 11 15.5
P-1620A-ST（51） 35 27 16.6 11 18.5
12
16
20
24
28
34
45
60
P-1624A-ST（51） 39 31 16.6 11 18.5 YES
P-1628A-ST（51） 42 34 16.6 11 18.5
P-1634A-ST（51） 47 39 16.6 11 18.5
P-1645A-ST（51） 56 48 16.6 15 18.5
P-1660A-ST（51） 69 61 16.6 15 18.5
Note: All these products are stopper brackets only. Order connector
units separately. The cases can be used for both male and
female connector units. The brackets marked with an asterisk
are of standard specifications.
P-1634A-ST（51）
109
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Top Touch Lock Type Plug Shell
Unit: mm
No. of Pin
HRS No.
Part No.
A
B
C
D
E
E
E
RoHS
20
24
28
34
45
60
CL216-0149-6-50
CL216-0147-0-50
CL216-0150-5-50
CL216-0111-3-50
CL216-0112-6-50
CL216-0113-9-50
P-1620A-CA（50） 37 20 51 11 11 18 14.5
P-1624A-CA（50） 41 20 51 11 12 18.5 15
P-1628A-CA（50） 44 20 53 11 13 20 15.5
P-1634A-CA（50） 49 20 56 11 16 21.5 17
P-1645A-CA（50） 58 20 60 11 19 24 18.5
P-1660A-CA（50） 71 20 65 11 24 26.5 21
YES
Note: All these products are plug cases only. Order connector units
separately. The cases can be used for both male and female connector
units. The cases marked with an asterisk are of standard specifications.
P-1634A-CA（50）
Side Touch Lock Type Receptacle Bracket
Unit: mm
No. of Pin
HRS No.
Part No.
A
B
RoHS
20
24
28
34
45
60
CL216-0156-1-51
CL216-0157-4-51
CL216-0158-7-51
CL216-0123-2-51
CL216-0124-5-51
CL216-0125-3-51
P-1620A-STA（51） 33 27
P-1624A-STA（51） 37 31
P-1628A-STA（51） 40 34
P-1634A-STA（51） 45 39
P-1645A-STA（51） 54 48
P-1660A-STA（51） 67 61
YES
Note: All these products are stopper brackets only. Order
connector units separately. The cases can be used
for both male and female connector units. The
brackets marked with an asterisk are of standard
specifications.
P-1634A-STA（51）
110
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Side Touch Lock Type Jack Shell (For Extension Cable)
Unit: mm
No. of Pin
HRS No.
Part No.
A
B
C
D
E
F
G
H
RoHS
20
24
28
34
45
60
CL216-0139-2-50
CL216-0140-1-50
CL216-0141-4-50
CL216-0142-7-50
CL216-0225-2-50
CL216-0226-5-50
S-1620A-（J 50） 37 23 17.5 45.5 11 11 14.5 14.5
S-1624A-（J 50） 41 23 17.5 46.5 11 12 15 15
S-1628A-（J 50） 44 23 17.5 47.5 11 13 15.5 15.5
S-1634A-（J 50） 49 23 17.5 50.5 11 16 17 17
S-1645A-（J 50） 58 23 18.5 54.5 11 19 18.5 19.5
S-1660A-（J 50） 71 23 18.5 59.5 11 24 21 22
YES
Note: All these products are jack cases only. Order connector units separately.
The cases can be used for female connector units only.
S-1634A-（J 50）
Top Touch Lock Type Stopper Bracket
Unit: mm
No. of Pin
HRS No.
Part No.
A
RoHS
20
24
28
34
45
60
CL216-0321-6
CL216-0322-9
CL216-0323-1
CL216-0324-4
CL216-0325-7
CL216-0326-0
1620STA-DC
1624STA-DC
1628STA-DC
1634STA-DC
1645STA-DC
1660STA-DC
38.3
42.3
45.3
50.3
59.3
72.3
YES
1645STA-DC
111
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
SHOULDER-TOUCH LOCK TYPE
General
The shoulder-touch lock type plug cases are highly re-
liable, lightweight, sturdy, and operable. 8, 12, and
16-contact models are available. Hirose high-density
packging plug cases, including the top-touch lock
type, are available in 8 to 60-contact models.
Material and Finish
Description
Plug case
Stopper
Material
Polypropylene resin
Finish
Black
Steel
Nickel plating
Plug Case
Unit: mm
F RoHS
No. of Pin
HRS No.
Part No.
1608-CBA（50） 14 35 40 45 7.5φ
1612-CBA（51） 14 40 41 46 7.5 YES
1616-CBA（50） 14 45 42 47 11.5 7.5
A
B
C
D
E
8
CL216-0416-0-50
CL216-0417-3-51
CL216-0418-6-50
12
16
9
Note: Order connector units separately. The cases can be used for both
male and female connector units.The cases marked with an asterisk
are of standard specifications.
1616-CBA（50）
Stopper
How to Mount
Connector Unit
Stopper
M2.6 Screw
Panel
1600-STB（05）
HRS No.
Part No.
Remark
RoHS
CL216-0302-1-05
1600-STB（05） Common for any size YES
Note: Mounted on a connector unit
(Each package contains two stoppers)
Note: Order connector units separately. The cases maked with an
asterisk are of standard specifications.
112
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
1600 SUMICON CRIMP TYPE CONNECTORS
General
The SUMICON 1600 series are
high-performance compact crimp
type connectors developed for
labor saving in connection work.
8, 12, 16, 20, 24, 34, 45 and 60-
contact models are available. All
models are compatible with our
previous top-lock type plig
cases. For using the connectors
separately, easy-to-mount plastic
locks are available to expand
their functions.
Orderig Information
Item
Standard
Part
Material
Finish
Blue
Contact Resistance
7mΩ or less at DC 1A（contact only）
Glass-containing
polycarbonate resin UL94V-0
Insulator
Insulation
Resistance
5,000MΩ or more at DC 500V
Male
Terminal
Gold-plated
Silver-Plated
Brass
Withstand Voltage
Rating Current
AC 1,000V for 1minute
3A
Female
Terminal
Gold-plated
Silver-Plated
Phosphor bronze
Applicable Cable
AWG＃24-28（Coating O.D. 1.6φ-0.9φ）
Cable
AWG＃24
3.6
AWG＃26
2.4
AWG＃28
1.6
Crimping strength
（Unit: kg or more）
Crimping
force
Features
1. Since this is a press-fit type connector, anyone can
performe wiring securely with high reliability.
2. For contact, a two-point contact system is em-
ployed for outstanding reliability, It asiso offers su-
perior mechanical strength.
3. The Sumicon 1600 Series Press-Fit Type Connec-
tors are interchangeable with the conventional sol-
der, DIP and lapping type connectors. They are
applicable, therfore, to a wider range of applica-
tions.
4 To use connector unit separately, jointly em-
ploying an easily installable plastic lock will pre-
vent vibrations and/or cable dead weight from un-
plugging the connector. The plastic lock, moreov-
er, can be used with either center-suspension or
panel-mount system.
5 All wiring spliced with the connector is hidden
completely inside the housing, allowing for perfect
insulation.
113
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Housing
Unit: mm
RoHS
Unit: mm
RoHS
HRS No.
No. of Pin
Part No.
L
P
W
HRS No.
No. of Pin
Part No.
L
P
W
CL216-0335-0
CL216-0336-3
CL216-0337-6
CL216-0338-9
CL216-0339-1
CL216-0340-0
CL216-0341-3
CL216-0342-6
CL216-0343-9
8
PC-1608
PC-1612
PC-1616
PC-1620
PC-1624
PC-1628
PC-1634
PC-1645
PC-1660
25
30
35
33
37
40
45
54
67
19
24
29
27
31
34
39
48
61
10
10
10
13
13
13
13
13
13
CL216-0344-1
CL216-0345-4
CL216-0346-7
CL216-0347-0
CL216-0348-2
CL216-0349-5
CL216-0350-4
CL216-0351-7
CL216-0352-0
8
SC-1608
SC-1612
SC-1616
SC-1620
SC-1624
SC-1628
SC-1634
SC-1645
SC-1660
25
30
35
33
37
40
45
54
67
19
24
29
27
31
34
39
48
61
10
10
10
13
13
13
13
13
13
12
16
20
24
28
34
45
60
12
16
20
24
28
34
45
60
YES
YES
Contact
Male Contact
Female Contact
Type
Loose
HRS No.
Part No.
Plating
RoHS
YES
Type
Loose
HRS No.
Part No.
Plating
RoHS
YES
CL216-0331-0
CL216-0332-2
CL216-0363-6
CL216-0364-9
PC-1600-111
PC-1600-112
PC-1600-211
PC-1600-212
Gold
Silver
Gold
CL216-0331-0
CL216-0332-2
CL216-0363-6
CL216-0364-9
PC-1600-111
PC-1600-112
PC-1600-211
PC-1600-212
Gold
Silver
Gold
Chain
Chain
Silver
Silver
Note: Loose-piece terminals are available in packs. Each pack contains 100
terminals. Strip terminals are available in reels. Each reel contains
10,000 terminals.
114
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Tools
Type
HRS No.
Part No.
Manual crimping tool
Contact extractor
CL250-0003-1
CL250-0004-4
TC-1600-111
TC-1600-21
Hand Crimp Tool TC-1600-111
Contact Extractor TC-1600-21
Ordering Informations
●
●
Housing
Contact
－
－
1600 ※ꢀ※ꢀ※
※ꢀ C
16 ※※
※ꢀ C
1: Gold-plated
2: Silver-plated
Applicable cable
No. of contact
Series No.
1: AWG 24-28
＃
1: Loose piece contact
2: Strip contact
Crimp type
P: Male, S: Female
Series No.
Crimp type
P: Male contact
S: Female contact
Using the Connectors
(1) Take care when removing the connectors to pull
out by the housing and not tug on the wires.
(2) The male terminals of the connectors will be bent
if the connectors are twisted when being removed.
Take care to pull the characters out straight.
(3) The plastic locks are sufficiently strong to ensure
that the connector engagement will not be
loosened by vibration or the weight of the wires.
Their strength is not sufficient for other loads.
When strngth for some other load is required, use
the top-touch lock type plug case (common for
both solder and wrapping types).
(4) Both gold-plated and silver-plated terminals are
available. Use the gold-plated type in adverse en-
vironments. In other environments. we recommend
the economical silver-plated type.
(5) For crimping, use a manual crimping device for
low-volume crimping and maintenance. For high-
volume crimping. we recommend the automatic
crimping machine shown on page 124.
(6) For plug-in uses, we recommend Sumicon 1600
series solder or wrapping types for improved func-
tionality.
115
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Assembling Procedure
Pin contact housing
Low-numbered side
Male contact
Wire
Low-numbered side
Female contact
Crimped state
After assembling, pull
the wire slightly and
make sure if the con-
tact is mounted as
shown above.
Socket contact housing
Procedure for Contact Extraction
In case of extracting a contact from the housing due to
insertion error or circuit change, follow the steps as shown below.
Fig. 1
Fig. 2
Extraction
Shell
1 Hold the Contact Extractor as shown in Fig. 1, plac-
ing the tip of the Extractor on the tip of a contact,
then insert it between the contact and the housing.
2. When the tip of the Extractor comes into contact
with a stepped part in the housing, the spring will
come off from the stepped part with a snap which
can be felt. Then, extract the contact by pulling the
wire.
0. (Caution: Pushing the tip of the extractor forcibly
before the spring has come off from the stepped
part may damage the contact).
3. Above Fig. 1 and Fig. 2 show how to extract a con-
tact from socket housing. The same procedure
can be employed to extract a contact from pin
housing.
116
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Use of Connectors with Respect to Polarity
(to prevent mis-insertion of connectors)
Polarization of SUMICON 1600 series can be achieved
by contact arrangement. The crimp type contacts are
designed to float a little, so that the use of a Polarizing
Key is recommended in order to ensure positive polar-
izatiom.
In Case of 8, 12 and 16 contact
1. When crimp types are used in both the male and
female, do not fill all cavities with contacts. Use
Polarizing Key at minimum 2 cavities of Socket
housing as shown below and do not fill pin con-
tacts at the corresponding cavities of male hous-
ing.
2. When male crimp type is used in combination with
solder or wire wrap female type, the connector
coupling shall be done corefully not to couple in
reverse position. Couplimg shall be made by
matching of traiangle marks on connector inserts.
In case of Multi Pin Type more than 20 contact
1. SUMICON 1600 series are naturally polarized in all
cavities filled with contacts. When all cavities are
not filled, Polarizing Keys shall be inserted in
vacant cavities to the minimum for preventing
reverse coupling. But when Top Touch Lock Plug
Shell is used, Polarizing Keys are not necessary
because Plug Shell has polarized mechanism.
2. When male crimp type is used with some vacant
cavities in combination with solder or wire wrap
female type, Top Touch Lock Plug Shell is recom-
mended.
117
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Handle
Unit: mm
No. of Pin
HRS No.
Part No.
A
B
C
D
RoHS
16 CL216-0135-1-50
34 CL216-0136-4-50
60 CL216-0137-7-50
1616-H（50）
1634-H（50）
1660-H（50）
36 25
46 30
68 30
6
6
8
29
39 YES
61
1634-H（50）
Deep Bracket
Unit: mm
RoHS
No. of Pin
HRS No.
Part No.
1634-DB
34
CL216-0138-0
YES
1634-DB
Crimp or any Connector Unit
How to Mount
HRS No.
Part No.
1600-LC
RoHS
YES
Molding
CL216-0354-5
1600-LC
Common for solder, wire wrap,
crimp or any connector unit
Polarizing Key
HRS No.
Part No.
RoHS
YES
How to Mount
CL216-0487-9
Polarizing Key
Molding
The polarizing key (material: SC-16“ ”) can be used for
any type of female housing. For handling, see“Notes on
connector polarity (prevention of misinsertion”on 124page
of this manual.
Polarizing Key
118
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Terminal Arrangment and Numbers
The figure shows a male connector as viewed from the termination side
8 pin
12 pin
16 pin
20 pin
24 pin
28 pin
34 pin
45 pin
60 pin
Connector Mounting Hole Dimensions
Unit: mm
screw
No. of Contact
A
B
C
8
19
24
29
27
31
34
39
48
61
13.5
18.5
23.5
21.5
25.5
28.5
33.5
42.5
55.5
8.5
12
16
20
24
28
34
45
60
8.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
M2.6
119
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
SUMICON 1600 SERIES DIP SOLDERING CONNECTORS
General
The SUMICON 1600 series are original Hirose rec-
tangular dip soldering connectors 8, 12, 16, 20, 24, 34, 45
and 60-contact models are available. All models are
compatible with the previous 1600 series in mounting
and accessories.
Features
1. Allows straight dip soldering onto a PCB, and is
effective in PCB-to-PCB and PCB-to-cable con-
nection.
2. Suitable for use in interface, being compact and
lightweight and meeting high-density packaging
requirements.
3. Further cuts interconnection costs when simple
locks are used.
4. A wide variety of combinations of connection
methods available, e.g., dip soldering, wrapping,
and crimping, to meet your requirements.
Main Applications
Computers, peripherals and terminals, data com-
munications equipment, measuring instruments,
signal equipment, mobile radio equipment, copier, and
FAX machine.
Electrical and Environmental
Performance
Material and finish
Contact
Resistance
Insulator
Glass-Filled diallylphtalate resin
7mΩ or less at DC 1A
Male Terminal
Female Terminal
Bress
Type A: Silver-plated
Type B: Gold-plated
Insulation
Resistance
1,000MΩ or higher
at DC 500V
Phosphor bronze
Withstand
Voltage
AC 1,000V for 1 minute
3A
Current capacity
Orderig Information
－
－
（09）
P
D
16 34
□
A
SP □
(1) (2)
(3) (4) (5) (6)
(7) (8) (9)
(1) Shape of terminal opening
(6) Plating
P: Male terminal
S: Female terminal
A: Silver plated
B: Gold plated
(2) Terminal connection method
D: Dip soldering
(7) Signs for accessories
SP: Spacer for dip soldering
(3) Series No.
(8) Serial signs for accessories
Each accessory is provided with a sequence A of
upper-case alphabetic characters. Sequence: No
sign, A, B ...
16: 1600 series
(4) Number of contacts
(5) Serial sign for connctor units
Provided with a sequence of upper-case alphabetic (9) Specification
characters.
(09) : Standard
Sequence: No sign, B, C, D, E ...
121
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Dip Soldering Type Connector
Male Connector
Dip Post 0.5×0.5
Unit: mm
A Type
G Type
No. of
Pin
A
B
C
D
E
RoHS
HRS No.
Part No.
HRS No.
Part No.
8
CL216-0388-7-09
CL216-0389-0-09
CL216-0390-9-09
CL216-0391-1-09
CL216-0392-4-09
CL216-0393-7-09
CL216-0394-0-09
CL216-0395-2-09
CL216-0396-5-09
PD-1608BA（09） CL216-0406-7-09
PD-1612BA（09） CL216-0407-0-09
PD-1616BA（09） CL216-0408-2-09
PD-1620BA（09） CL216-0409-5-09
PD-1624BA（09） CL216-0410-4-09
PD-1628BA（09） CL216-0411-7-09
PD-1634BA（09） CL216-0412-0-09
PD-1645BA（09） CL216-0413-2-09
PD-1660BA（09） CL216-0414-5-09
PD-1608BG（09） 25 19 10 13
PD-1612BG（09） 30 24 10 18
PD-1616BG（09） 35 29 10 23
8
8
8
12
16
20
24
28
34
45
60
PD-1620BG（09） 33 27 13 21 11
PD-1624BG（09） 37 31 13 25 11 YES
PD-1628BG（09） 40 34 13 28 11
PD-1634BG（09） 45 39 13 33 11
PD-1645BG（09） 54 48 13 42 11
PD-1660BG（09） 67 61 13 55 11
PD-1634BA（09）
Female Connector
Dip Post 0.5×0.5
Unit: mm
A Type
G Type
No. of
Pin
A
B
C
D
E
RoHS
HRS No.
Part No.
HRS No.
Part No.
8
CL216-0379-6-09
CL216-0380-5-09
CL216-0381-8-09
CL216-0382-0-09
CL216-0383-3-09
CL216-0384-6-09
CL216-0385-9-09
CL216-0386-1-09
CL216-0387-4-09
SD-1608BA（09） CL216-0397-8-09
SD-1612BA（09） CL216-0398-0-09
SD-1616BA（09） CL216-0399-3-09
SD-1620BA（09） CL216-0400-0-09
SD-1624BA（09） CL216-0401-3-09
SD-1628BA（09） CL216-0402-6-09
SD-1634BA（09） CL216-0403-9-09
SD-1645BA（09） CL216-0404-1-09
SD-1660BA（09） CL216-0405-4-09
SD-1608BG（09） 25 19 10 13
SD-1612BG（09） 30 24 10 18
SD-1616BG（09） 35 29 10 23
8
8
8
12
16
20
24
28
34
45
60
SD-1620BG（09） 33 27 13 21 11
SD-1624BG（09） 37 31 13 25 11 YES
SD-1628BG（09） 40 34 13 28 11
SD-1634BG（09） 45 39 13 33 11
SD-1645BG（09） 54 48 13 42 11
SD-1660BG（09） 67 61 13 55 11
SD-1634A（09）
122
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Dip Spacer
HRS No.
Part No.
Application
Connector unit packing
（applicable for models with any number of contacts）
CL216-0419-9
D-1600-SPA
For packing with Connector unit stopper
（applicable for models with any number of contacts）
CL216-0420-8
D-1600-SPB
Mounting screws must be supplied by the customer
Pin connectors
Socket connector
Socket connector
Pin connectors
without Brackets
without Brackets
D-1600-SPA
P.C.B
D-1600-SPA
P.C.B
Nu（t M2.6×0.45）
Nu（t M2.6×0.45）
Screw（M2.6×0.45×12）
Screw（M2.6×0.45×12）
D-1600-SPA
Male connector with side-lock type stopper bracket
Female connector with side-lock type stopper
bracket
Male connector
with ST
Female connector
with ST
D-1600-SPB
D-1600-SPB
P.C.B
P.C.B
Nu（t M2.6×0.45）
Screw（M2.6×0.45×12）
Nu（t M2.6×0.45）
Screw（M2.6×0.45×12）
Male connector with top-touch-lock type stopper
Female connector with top-touch-lock type stopper
bracket
Male connector
with ST
bracket
Female connector
with ST
D-1600-SPB
D-1600-SPB
D-1600-SPB
P.C.B
P.C.B
Nu（t M2.6×0.45）
Screw（M2.6×0.45×12）
Nu（t M2.6×0.45）
Screw（M2.6×0.45×12）
Note 1: The connector unit packaging spacer（SPA）cannot be used for packing with the connector unit stopper bracket.
Note 1: The packaging spacer with connector unit stopper bracket（SPB）cannot be used for packaging the connector unit.
Note 2: Provide two spacers（SPA and SPB）for each connector unit.
＊ The dimensions marked with an asterisk（＊）are for PCBs of 1.6mm in thickness.
How to use connectors
1. When disconnecting, pull it as straight as possible, because the male pins might be damaged if it is
twisted.
2. Connctors are available with gold to be used in adverse environmental conditions and silver-
plated pins be used in ordinary conditions.
123
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Recommended Dip Soldering Pattern of Connector
（mm）
When dip soldering the connectors to a PCB, drill
holes as shown below. The figures indicate the num-
ber of contacts.
connector unit) on the mating face of the connector
unit.
Signs △ indicate the V-shaped mark (direction of the
Recommended Dip Soldering Pattern of Pin Connector (View of the connector-mounting surface of substrate)
PD-1608
PD-1612
PD-1616
PD-1620
PD-1624
PD-1628
PD-1634
PD-1645
124
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
PD-1660
Recommended PC Board Hole Pattern Socket Connector
SD-1608
SD-1612
SD-1616
SD-1620
SD-1624
SD-1628
125
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
SD-1634
SD-1645
SD-1660
（mm）
Applicable Screw
Recommended Mounting Hole
No. of Pin
A
B
C
8
19
24
29
27
31
34
39
48
61
13.5
18.5
23.5
21.5
25.5
28.5
33.5
42.5
55.5
8.5
8.5
12
16
20
24
28
34
45
60
8.5
11.5
11.5
11.5
11.5
11.5
11.5
M2.6
126
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Function Chart 1
Plan Lock
Polarizing Key
CA Shell
Top-Touch Lock
Crimp Pin Contact
Crimp Socket Contact
*STA Stopper Bracket
Crimping
C Shell
Male Housing
Female Housing
Side-Touch Lock
ST Stopper Bracket
Soldering Eyelet
Pin Insert
Socket Insert
CBA Shell
Wire Wrapping
Shoulder-Touch Lock
Pin Insert
Socket Insert
STB Stopper Bracket
Handle
Straight Dip Soldering
Pin Insert
Socket Insert
127
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
SUMICON 1600 SERIES RIGHT-ANGLE DIP SOLDERING CONNECTORS (MALE)
General
The SUMICON 1600 series are Hirose right-angle dip
soldering connectors (male).
All models are compatible with the existing soldering
type, wrapping type, crimping tpe, and straight dip
soldering type connectors including their accessories.
20, 28, 34 and 60-contact models are available.
Features
1. Direct dip soldering on a PCB enables conve-
nient parallel connection with cable plugs.
e.g., dip soldering, wrapping, and crimping, to meet
your requirements.
2. Suitable as an interface, being lightweight and
capable of high-density packaging.
3. Further cuts interconnection costs by using crimp-
ing type plugs with plastic locks for simple cable
connection, so no cases are needed.
5. Available with or without a top-touch lock type
bracket and side-lock type bracket, offering you
many choices for your applications.
6. Highly solvent-resistant, using insulating materials
with high heat resistance and chemical-resistance.
4. A wide variety of connection methods available,
Main Applications
Electronic equipment such as computers, peripherals and terminals, control equipment, and measuring instru-
ments.
Electrical and Environmental
Electrical Characteristics
Material and Finish
Contact
Resistance
Glass-Filled
diallylphthalate resin
3A
Insulation
Blue
Contact
Resistance
Type A: Silver-plated
Type B: Gold-plated
AC 300V
Contact
Brass
Polybutylenephthalate resin
Steel
Contact
Resistance
Right Angle
Blue（UL94V-0）
Nickal plating
10mΩ or less at DC 1A
Stopper Bracket
Contact
Resistance
100MΩ or higher
at DC 500V
Contact
Resistance
1,000Vr.m.s.
for 1 minute
129
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Ordering Information
－
－
（50）
STA R
P
R
16 34
B
A
(1) (2)
(3) (4) (5) (6)
(7) (8) (9)
(1) Shape of terminal opening
(6) Plating
A: Silver-plated
P: Male terminal
(2) Terminal connection method
R: Right-angle dip soldering
(3) Series No.
B: Gold-plated
(7) Accessories
ST: Side-lock type stopper bracket
16: 1600 series
(4) Number of contacts
(5) Serial sign for connctor units
STA: Top-touch type stopper bracket
(8) R: Indicates a connector on which the STA bracket
is mounted in the reverse direction against the
standard. (the standard refers to the direction in
which both △ marks on the STA bracket and con-
nector unit are in the direction).
Provided with a sequence of upper-case alphabe-
tic characters.
(9) Specification
(50) : RoHS compliant
Right Angle Dip Soldering Pin Connectors
With Stopped Bracker for Top-Touch Lock Plug Shell
Dip post 0.5×0.5
Unit: mm
A Type
No. of
Pin
A
B
C
RoHS
HRS No.
Part No.
20
28
34
60
CL216-0448-7-50
CL216-0450-9-50
CL216-0451-1-50
CL216-0453-7-50
PR-1620BA-STA（50）
PR-1628BA-STA（50）
PR-1634BA-STA（50）
PR-1660BA-STA（50）
27 33 36
34 40 43
39 45 48
61 67 70
YES
PR-1634BA-STA（50）
Gold plated type are available options.
130
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
With Stopper Bracket for Side-Touch Lock Plug Shell
Unit: mm
Dip Post 0.5×0.5
Type A
No. of Pin
A
B
C
RoHS
○
HRS No
Part No.
20
28
34
60
CL216-0455-2-50
CL216-0457-2-50
CL216-0458-2-50
CL216-0460-2-50
PR-1620BA-ST（50）
PR-1628BA-ST（50）
PR-1634BA-ST（50）
PR-1660BA-ST（50）
27
34
39
61
35
42
47
69
36
43
48
70
PR-1634BA-ST（50）
Gold plated type are available options
Connector Unit Only Without Bracket
Unit: mm
Dip Post 0.5×0.5
Type A
No. of Pin
A
B
C
RoHS
○
HRS No
Part No.
PR-1634BA（50）
20
CL216-0461-5-50
CL216-0463-0-50
CL216-0464-3-50
CL216-0466-9-50
PR-1620BA（50）
PR-1628BA（50）
PR-1634BA（50）
PR-1660BA（50）
27
34
39
61
33
40
45
67
36
43
48
70
28
34
60
Gold plated type are available options
131
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
With Stopper Bracket for Top Touch Lock Plug Shell in Reverse Position
Unit: mm
Dip Post 0.5×0.5
Type A
No. of Pin
A
B
C
RoHS
○
HRS No
Part No.
20
28
34
60
CL216-0495-7-50
CL216-0497-2-50
CL216-0498-5-50
CL216-0500-5-50
PR-1620BA-STAR（50）
PR-1628BA-STAR（50）
PR-1634BA-STAR（50）
PR-1660BA-STAR（50）
27
34
39
61
33
40
45
67
36
43
48
70
PR-1634BA-STAR（50）
Gold plated types are available options.
Note: When this type is used mounting direction of socket insert in plug shell
shall be in reverse position against the triangle mark on plug shell.
How to Use (Example)
With Top Touch Lock Bracket
Connector
Mounting Side
Top Touch Lock Plug Shell
PCB
Cable
132
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
How to Use Right Angle Dip Soldering Connectors
Unit: mm
1. The standard use of this to mount it on the left side
of a vertical PC board. (Fig. 1)
PCB
△Mark
No. of pin
Right Angle
Connector
Leftt Side of PCB
Pin No.
Connector
Mounting Side
Dip Soldering Side
PCB
PCB
Fig. 1
Unit: mm
2. It is possible to mount it on the right side of PCB but
special caution is necessary to be opposite all pin
locations on dip soldering surface. (Fig. 2)
Connector Mounting Side
Pin No.
Right Angle Connector
No. of pin
△Mark
Right Side of PCB
Pin No.
PCB
Dip soldering Side
Fig. 2
133
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3. When Top Touch Lock Type Plug Shell and Stopper
Bracket are used with mounts on the right side of a
PCB, not only the pin locations become opposite,
but also the Lock Release Button and Cable Exit are
upside down.
So, the Reverse Mount Stopper Bracket is conveni-
et in such case. (Fig. 3)
Connector Mounting Side
△Mark
△Mark
Lock Release Button
Right Side of PCB
Connector with Reverse
Mount Stopper Bracket
Top Touch
Kock Plug Shell
PCB
Socket Insert
Plug Connector
Right Angle Connector with Reverse Mount Stopper Bracket
Fig. 3
4. M2.6 screws are recommended to mount Right
Angle Dip Soldering Pin Connectors.
5. Please choose PC board thinner than 2.4mm.
6. In extracting plug connector, please pull it up
straight out to prevent male pin from bending.
7. The standard plating is silver but gold is also an
available option.
8. Note: The dip soldering pattern on PCB of Right
Angle Type and Straight Type are different
from each other.
9. Before using a solvent other than trichloroethyl-
ene, chlorosene, methanol, isopropanol, or
ethyalchol to wash soldered connectors, contact
out engineering department.
134
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Recommended Dip Soldering Pattern
Unit: mm
hole
hole
Pin No.
Pin No.
PCB End
PCB End
hole
Pin No.
Pin No.
PCB End
PCB End
Note 1. The triangle mark represents the position of
the same mark on the connector unit.
2. Above pattern is shown view direction of the
connector mounting side.
135
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Recommended Mounting Pattern
Unit: mm
For insertion-soldering in the PCB, drill mounting holes as shown in the figure below.
Post hole
2－M2.6 hole
Pin No.
PCB End
Connector
With top-touch-lock type stopper bracket
PCB End
hole
Pin No.
PCB End
Connector
With side-lock type stopper bracket
hole
Post hole
No. of
pin
A
20
28
34
60
27
34
39
61
Pin No.
PCB End
Connector
Connector Unit Type
The triangle mark represents the position of the same
mark on the connector unit.
Above pattern is shown from view direction of the conec-
tor mounting side.
136
04/2009
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Function Chart 2
Plain Lock
Crimp Socket Contact
(only for the combination
with Right Angle Dip
Connector Unit)
CA shell
Top-Touch Lock
Right-Angle Dip STA
stopper bracket
Crimping
*
Female Housing
Soldering Eyelet
C shell
Socket Insert
Side-Touch Lock
Right-Angle Dip ST
stopper bracket
Wire Wrapping
Socket Insert
Straight-Dip Soldering
Right-Angle Dip
Connector Unit
Socket Insert
＊Dust cap is available for STA stopper bracket.
137
04/2009
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明