DF19G-20P-1CGND [HRS]
1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable; 对于线1毫米间距薄型连接器系统，以印刷电路板应用范围适用于离散线， FPC或细同轴电缆的使用
| 型号： | DF19G-20P-1CGND |
| 厂家： | 
HRS |
| 描述： | 1 mm-Pitch Low Profile Connector System for Wire to PCB Applications Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable |
| 文件： | 总12页 (文件大小：867K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NEW
1 mm-Pitch Low Profile Connector System for Wire to PCB Applications
Suitable for use with Discrete Wire, FPC or Fine Coaxial Cable.
DF19 Series
Drawing of mated connectors
*
on a DF19G - P-1H board
Drawing of mated connectors
*
on a DF19K- P-1H board
For connection
of cables
For connection
of FPC
For connection of
fine coaxial cables
On-board type
Offset type
Reverse offset type
Drawing of mated connectors
*
on a DF19L- P-1H board
■Features
1. Ultra Low Profile
FPC type: Max. 1.7 mm thick
Discrete Wire & Coaxial 1.5 mm thick
2. SMT HEADERS Suit all Sockets
Each header can connect to three different sockets (cable, FPC,
and fine coaxial cable type.
(Note: Fine coaxial cable type is under development.)
Drawing of mated connectors
on a DF19KR- P-1H board
3. Standardised Outer Dimensions
*
The three sockets have the same outside dimensions to allow
complete Flexibility.
4. Many Variations
There are headers of the on-board, offset, and reverse offset types
to accommodate all designs.
5. Connection to a Metal GROUND Plate
Ground lines can be connected to a metal shell for shielding.
■Application
LCDs, notebook personal computers, small OA machines, and small consumer products
2000.5
1
■Product Specifications
Rated current
AWG#28 : 1A
AWG#30 : 0.5A
AWG#32 : 0.3A
Storage temperature range
Storage humidity range
Operating temperature range
Operating humidity range
-35~85ç Note 1
-35~85ç Note 2
-20~80%
-10~60ç Note 2
-40~70%
Rating
FPC
: 0.5A
Fine coaxial cable AWG# 40: 0.3A
Rated voltage
AC100V
Item
1.Insulation resistance 500MW or more
2.Voltage proof No flashover or breakdown
3.Contact resistance 30mW or less (50mW or less for FPC)
Specification
Conditions
Measure at DC100V.
300 V AC, applied for one minute.
Measure at 100 mA.
-
4.Insertion Extraction Force
MIN 0.2N(20gf) MAX 3N(300gf)
,
Measure with a steel pin with thickness of 0.2±0.005.
(per Contact)
5.Vibration
No electrical discontinuity for 1µs or more
Frequency: 10 Hz to 55 Hz, amplitude of 0.75 mm in 3 directions, 2h
± –
Temperature of 40 2 C, humidity of 90% to 95%, duration 96h
6.Damp heat
Contact resistance: specified value or less, insulation resistance: 500MW or more
Contact resistance: specified value or less, insulation resistance: 500MW or more
7.Temperature Cycling
(-55-C: 30 min -> 5-C to 35-C: 10 min -> 85-C: 30 min -> 5-C to 35-C: 10 min ) 5 cycles
8.Mechanical operation Contact resistance: specified value or less
50 mechanical-operation cycles
9.Resistance to soldering heat No melting of resin portion, which affects performance
Reflow: At the recommended temperature profile, manual soldering: iron temperature 300
-
C for 3s
Note1: Includes the temperature rise due to current flow.
Note2: The term storage refers to unused products prior to PCB mounting that is being stored for long periods.
The operating temperature and humidity range are applicable to connectors not carrying current. After PCB assembly or
temporary storage during transportation.
Note3: The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office.
■Material
Product
Part
Material
Color / Finish
Grey
UL standard
UL94V-0
----------
Insulation
Polyamide resin
Phosphor bronze
Phosphor bronze
Polyamide resin
Stainless steel
Phosphor bronze
Polyamide resin
Phosphor bronze
Stainless steel
LCP resin
Pin header
Terminal
Selective Gold Plating
Tin Plated
Ground Plate
Insulation
----------
Grey
UL94V-0
----------
Socket
Ground Plate
Terminal
Tin Plated
Crimp-Contact
FPC socket
Gold Plated
Grey
----------
Insulation
UL94V-0
----------
Terminal
Selective Gold Plating
Tin Plated
Ground plate for FPC
Ground Plate
Insulation
----------
Grey
UL94V-0
----------
Socket for fine coaxial cables
Terminal
Phosphor bronze
Phosphor bronze
Phosphor bronze
Selective Gold Plating
Tin Plated
Ground Plate
Ground Plate
----------
Ground plate for fine coaxial cables
Note1: Tinning is Whisker free
Tin Plated
----------
2
■Part Number Construction
The type name DF19 represents a specific product specification.
To order a product, specify the type from pages 4 to 9.
●Connector
*
4
DF 19 # -
P - 1 H
1
2
3
5
6
7
*
4
DF 19 # -
S - 1 F - GND
1
2
3
5
6
7
8
1
2
3
Series Name : DF
Series No. : 19
Profile :
4
5
Number of contacts
Connector type
S : Single row socket
P : Single row pin header
:
8,14,20,30... (Note 1)
■Pin header
6 Contact pitch : 1mm
7 Wiring type / terminal profile
G
K
L
:
:
:
On-board type (1.65 mm from the board)
Offset type (1.0 mm from the board)
Offset type (1.1 mm from the board)
H
C
F
: Right angle SMT
: Crimp socket
: FPC socket
KR : Reverse offset type of DF19K
(1.0 mm from the board)
■Crimp socket
SD : Socket for fine coaxial cables
8 Part for installation
None : Without grounding shell
GND : Ground plate (Note 2)
G
: With grounding shell (protected for EMI)
■FPC socket
G
: Specification for connection with ground
shell
■Ground plate for FPC
G
: Specification for connection with ground
shell
■Socket for coaxial fine cables
G
: Specification for connection with ground shell
■Ground plate for fine coaxial cables
G
: Specification for connection with ground shell
(Note 1) Be careful, as the number of contacts differ depending on the profile.
(Note 2) The FPC and coaxial fine cable types always use a ground plate.
●Terminal
(
)
* *
DF19 - 2830 SCF A
1
2
3
4
1 Symbol
3 Plating
2830 : AWG#28~30
3032 : AWG#30~32
2 Type
A : Gold plating
4 Specification
SCF : Socket contact reel Packaging
None : 10 000 pieces per reel
41 : 20 000 pieces per reel
3
■Right Angle Pin Header (SMT)
(On-board Type)
Assembled Header
B
Recommended PCB Layout
Note1:
Masked area (hatched). Pattern in this area must be protected by resist.
( )
Specification No.* *,
* *
(
)
59 : Gold plating, Tape and reel packaging
Unit: mm
Product No.
(
HRS No.
Number of poles
A
B
7
C
Width of emboss
Remarks
)
8
11.55
11.95
24
44
44
44
DF19G-18P-1H * * CL685-0021-0-* *
(
)
14
20
30
17.55 13 17.95
23.55 19 23.95
33.55 29 33.95
DF19G-14P-1H * * CL685-0004-0-* *
1.65 mm from the
board
(
)
DF19G-20P-1H * * CL685-0006-6-* *
(
)
DF19G-30P-1H * * CL685-0015-7-* *
Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel).
4
■Right Angle Pin Header (SMT)
(Offset Type)
Assembled Header
B
Recommended PCB Layout
( )
Specification No.* *,
* *
(
)
59 : Gold plating
Unit: mm
Remarks
Product No.
HRS No.
Number of poles
A
B
C
D
E
Width of emboss
(
)
)
20
30
23.55 19 26.55 24.15 25.15
33.55 29 36.55 34.15 35.15
44
56
DF19K-20P-1H * *
CL685-0008-1-* *
CL685-0032-6-* *
1.0 mm from the
board
(
DF19K-30P-1H * *
C
D
E
Product No.
HRS No.
Number of poles
A
B
Width of emboss
Remarks
(
)
)
)
14
20
30
17.55 13 20.55 18.15 19.15
23.55 19 26.55 24.15 25.15
33.55 29 36.55 34.15 35.15
44
44
56
DF19L-14P-1H * *
CL685-0003-8-* *
CL685-0019-8-* *
CL685-0016-0-* *
1.1 mm from the
board
(
DF19L-20P-1H * *
(
DF19L-30P-1H * *
Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel).
5
■Right Angle Pin Header (SMT)
(Reverse Offset Type)
Assembled Header
■Recommended PCB Layout
( )
Specification No.* *,
* *
(
)
59 : Gold plating
Unit: mm
Remarks
Product No.
HRS No.
Number of poles
A
B
C
D
E
Width of emboss
(
)
)
14
20
17.55 13 20.55 18.15 19.15
23.55 19 26.55 24.15 25.15
44
44
DF19KR-14P-1H * *
CL685-0024-8-* *
CL685-0023-5-* *
1.0 mm from the
board
(
DF19KR-20P-1H * *
Note1: Specify the number of reels to order tape and reel packaging (1 000 pieces per reel).
6
■Single Row Socket (Discrete Wire)
DF19-*S-1C
DF19G-*S-1C
Assembled Socket
(
)
Specification No. * * , * *
None: 1 pack (100 pieces)
Unit: mm
Product No.
HRS No.
Number of poles
A
B
7
Product No.
( )
DF19G - 8S-1C * * CL685-0022-2-* *
HRS No.
Number of poles
A
B
7
(
)
8
11.5
8
11.5
DF19 - 8S-1C * *
CL685-0029-1-* *
(
)
( )
DF19G -14S-1C * * CL685-0005-3-* *
14
20
30
17.5 13
23.5 19
33.5 29
14
20
30
17.5 13
23.5 19
33.5 29
DF19 -14S-1C * * CL685-0012-9-* *
(
)
( )
DF19G -20S-1C * * CL685-0007-9-* *
DF19 -20S-1C * * CL685-0011-6-* *
(
)
( )
DF19G -30S-1C * * CL685-0014-4-* *
DF19 -30S-1C * * CL685-0013-1-* *
Note1: Products are sold in bulk packs. To order, specify the number of packs (100 pieces per pack).
■Socket Crimp Contact
Product No.
HRS No.
685-0001-2-
685-0002-5-41
Type
Quantity
Color / Finish
Gold plating
Gold plating
(
)
)
Reel terminal
Reel terminal
10,000 pieces per reel
20,000 pieces per reel
DF19-2830SCF * *
(
DF19-3032SCF * *
(
)
Specification No. * * , * *
None: 1 Reel 10,000 pieces per reel
(41) : 1 Reel 20,000 pieces per reel
●Applicable Wire (tinned soft conductor)
Applicable wire size (core wire composition)
AWG#28 (7 strands/0.127 mm)
AWG#30 (7 strands/0.1 mm)
AWG#32 (7 strands/0.08 mm)
Sheath diameter
Ø0.5 ~ Ø0.6mm
●Recommended Wire
●UL1571
●Strip Length
●1.2~1.9mm
Note1: Please contact us when you use wires other than those specified in the table.
●Recommended Crimp Tooling
Type
Applicator
Press
Product No.
AP105-DF19S
CM-105
HRS No.
CL901-4571-3
CL901-0005-4
CL550-0284-7
Manual crimping tool
HT302/DF19S
Note1: Product is not guaranteed when non-specified tools are used.
Note2: Terminals are cut for manual crimping tool use.
7
■Single Row Socket (For FPC Cable)
Note1: Wiring of FPC requires a socket and a ground plate.
Assembled Socket
Unit: mm
D E
Product No.
(
HRS No.
Number of Contacts
A
B
C
(
)
Specification No. * *, * *
None: 1 pack (100 pieces)
)
14
20
30
17.5 17.1
23.5 23.1
33.5 33.1
13
19
29
15.6
21.6
31.6
14
20
30
DF19G-14S-1F * * CL685-0017-2-* *
(
)
DF19G-20S-1F * * CL685-0009-4-* *
(
)
DF19G-30S-1F * * CL685-0033-9-* *
Note1: Products are sold in bulk packs. To order, specify the number of packs (100 pieces per pack).
■Ground Plate for FPC
Note1:See page 12 for the
assembling method.
Unit: mm
Product No.
HRS No.
Number of Contacts
A
B
C
(
)
DF19G-14S-1F-GND * * CL685-0018-5-* *
14
20
30
14.4 14.35 15.75
20.4 20.35 21.75
30.4 30.35 31.75
(
)
DF19G-20S-1F-GND * * CL685-0010-3-* *
, (
)
Specification No. * * * *
None: 1 pack (100 pieces)
(
)
DF19G-30S-1F-GND * * CL685-0034-1-* *
Note1: Products are sold in bulk packs. To order, specify the number of packs (100 pieces per pack).
●Applicable Assembling Tools
Type
Product No.
HRS No.
Desk-top tool (for 14 core wires) DF19G-14S/PR-MD2 CL902-4514-6
Desk-top tool (for 20 core wires) DF19G-20S/PR-MD2 CL902-4513-3
Desk-top tool (for 30 core wires) DF19G-30S/PR-MD2 CL902-4518-7
Note1: Product is not guaranteed unless Hirose approved tools are used.
8
■Single Row Socket (Fine Coaxial Cable) ... (Under development)
(
)
Specification No. * *, * *
None: 1 pack (100 pieces)
Product No.
HRS No.
-----------
Number of poles
(
)
)
14
20
DF19G-14S-1SD * *
(
-----------
DF19G-20S-1SD * *
Note1: The products will be sold in bulk packs (100 pieces per
pack). To order, specify the number of packs.
●Applicable Wire (Fine Coaxial Cable) ... Planned
Applicable wire size (core wire composition) Sheath diameter
Assembled Coaxial Socket
AWG#40(7strands/0.03mm)
Ø0.3 ~ Ø0.4mm
9
B
Drawing of Tape and Reel Dimensions (as per JIS-C-0806)
●DF19G-*P-1H
●DF19K-*P-1H
●DF19L-*P-1H
●DF19KR-*P-1H
Unit: mm
Insertion connector Number of Contacts
A
B
C
D
E
F
Remarks
DF19G -18P-1H
08
14
20
30
20
30
14
20
30
14
20
24
44
44
56
44
56
44
44
56
44
44
-------- 11.5 16.1 24.4 30.4
40.4 20.2 22.1 44.4 50.4
40.4 20.2 28.1 44.4 50.4
50.2 26.2 38.1 56.4 62.4
40.4 20.2 28.1 44.4 50.4
52.4 26.2 38.1 56.4 62.4
40.4 20.2 22.1 44.4 50.4
DF19G -14P-1H
DF19G -20P-1H
DF19G -30P-1H
DF19K -20P-1H
DF19K -30P-1H
DF19L -14P-1H
DF19L -20P-1H
DF19L -30P-1H
DF19KR-14P-1H
DF19KR-20P-1H
On-board type (1.65 mm from the board)
Offset type (1.0 mm from the board)
40.4 20.2 28.1 44.4 50.4 Offset type (1.0 mm from the board)
52.4 26.2 38.1 56.4 62.4
40.4 20.2 22.1 44.4 50.4
40.4 20.2 28.1 44.4 50.4
Reverse offset type
of DF19K (1.0 mm from the board)
10
B
Soldering Temperature Profile
1. Recommended temperature profile
(Note 1) The temperature profile can be applied twice with the normal temperature profile.
(Note 2) The temperature is measured at the connector lead.
Soldering iron temperature 290 ±10ç, soldering time 3 seconds or less
0.15mm
2. Recommended manual soldering conditions
3. Recommended screen thickness
4. Warpage of board
5. Cleaning
Max. 0.03mm at the connector center with the connector ends as the reference.
See the separate “Guide to Hirose Nylon connectors.”
See the separate “Guide to Hirose Nylon connectors.”
6. Wiring
■
As crimp terminals are extremely small, crimping must be performed with care: observe
the directions in the Crimping Condition Sheet and Crimping Standard Sheet.
“
”
“
”
7. Precautions
■ Due to the ultra miniature design care needs to be taken when disconnecting to avoid
accidental damage.
11
B
Assembly Procedure for FPC Socket
Note1:The ground plate and the socket are sold separately.
Note2:Use the special tool for assembling.
Note3:To insert the ground plate, lift the FPC about 30° to make a space for insertion. Don’t apply excessive force (bending or
gouging, as the FPC copper foil (end of the cover film) will crack.
Note4:If the ground plate doesn’t enter the socket, don’t apply excessive force, but check whether it is parallel with the socket.
Note5:To protect the FPC, insert or pull out the connector in parallel with the engagement plane.
Note6:To protect the FPC, don’t apply excessive tension.
Note7:To bend the FPC, observe the allowable R and other conditions recommended by the manufacturer, and keep a distance
between the bending point and the socket as shown in the illustration below.
Note8:To assemble the FPC to the socket, use the recommended jigs and tools and be careful not to be injured by the
edge of the metallic part of the connector. Observe the instructions given in the manual for wiring jigs and tools.
The contents of this catalog are current as of May 2000 Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明