DF20F-10DP-1V(59) [HRS]
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Beige Insulator, Receptacle;
| 型号： | DF20F-10DP-1V(59) |
| 厂家： | 
HRS |
| 描述： | Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.039 inch Pitch, Surface Mount Terminal, Beige Insulator, Receptacle |
| 文件： | 总7页 (文件大小：235K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NEW
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
DF20 series
Socket
DF20A-
**DS-1C
5.4
Cable
DF20F(G)-
**DP-1V
Pin
Header
PCB
DF20A-
**DS-1C
DF20F
**DP-1H
6.2
Socket
Pin
Header
Cable
PCB
ꢀFeatures
Narrower external width and length
1. Contact Pitch
1 mm contact pitch allows reliable solder and cable
termination.
2. Low profile
Total mating height above the board is 5.8 mm for the
straight type and 5.5 mm for the right angle type.
3. Reliable electrical connection wipe
Effective electrical connection is assured with a 1mm wipe of
mating contacts.
4. Narrower external width and length
Redesigned metal fittings decreased the overall length of the
board- mount receptacle and permit end-to-end mounting of
several connectors.
Metal fitting
5. Automatic equipment board placement
Straight type pin headers are supplied with a 5.4 mm X 4.6mm
flat platform to allow vacuum pick-up and placement on the
board
.
6. Product variations
(1) Available with 10, 20, 30, 40, and 50 contacts.
(2) Pin headers are available in two types: with or without
board positioning bosses.
(3) Depending on specific application pin headers can be
ordered in straight or right angle types.
DF20F-****SCFA
Contact
DF20A-**DS-1C
Socket
ꢀApplications
DF20F(G)-**DP-1V
Pin Header
Notebook PC, small office automation equipment, small
consumer devices, portable devices.
Any application requiring low profile reliable board-to-cable
connection with a AWG #28, AWG#30, AWG#32 conductors.
1mm Pitch, Double Rows
2002.5
1
ꢀProduct Specifications
AWG#28 : 1A
Rated current
Operating temperature range
Operating humidity range
Storage temperature range -10°C to 60°C (Note 2)
Storage humidity range -40% to 70%
-35°C to 85°C (Note 1,2)
-20% to 80%
AWG#30 : 0.9A
Rating
AWG#32 : 0.7A
Rated voltage
100V AC
Item
Specifications
Conditions
1.Insulation resistance
2.Withstanding voltage
3.Contact resistance
Measured at 100V DC
500Mø min.
Conduction of 300V AC applied for 1 minute
Measure at 100mA.
No flashover or insulation breakdown
30mø max.
4.Insertion-Extraction force
4.(per contact)
Measured with a steel pin of 0.2 ±0.005 thickness
Min. 0.2 N (20 gf), Max. 2 N (200 gf)
5.Vibration
Frequency of 10 to 55 Hz, single amplitude of 0.75 mm, in 3 directions for 2hours
Temperature of 40 2ç, humidity of 90% to 95%, left standing for 96 hours
(-55ç:30min / 5ç to 35ç: 2 to 3min / 85ç:30min / 5ç to 35ç:2 to 3min ) for 5 cycles
50 cycles
No electrical discontinuity of 1µs min.
Contact resistance of 30mø max., insulation resistance of 100Mø min.
Contact resistance of 30mø max,insulation resistance of 500Mø min.
Contact resistance of 30mø max.
6.Humidity
7.Temperature cycle
8.Mechanical operation
9.
Resistance to
Soldering heat
Reflow: At the recommended temperature profile, manual
solder: Soldering iron temperature of 300°C for 3 seconds
No deformation of the insulator parts that will
affect performance
Note1: Includes temperature rise caused by current flow.
Note2: The term “storage” refers to products stored for long periods of time prior to mounting and use.
Note2: Operating temperature range and Humidity range covers non-conducting conditions of installed connectors in storage,
Note2: shipment or transportation.
ꢀMaterials
Item
Part
Material
Polyamide
Finish
Remarks
UL94V-0
----------
Socket
Insulator
Contact
Insulator
Contact
Color : Beige
Gold plating
Socket contact
Phosphor bronze
Polyamide
Color : Beige
Gold plating
UL94V-0
----------
Phosphor bronze
Pin header
V type: Solder plating
H type: Tin-Copper plating (Pb free)
Metal Fitting
Brass
ꢀOrdering Information
ꢀConnectors
DF 20 # - * DS - 1 C
1
2
3
4
5
6
7
1
2
3
Series name : DF
Series No. : 20
Boss Type
Connector type
5
DS: Double-row socket
DP: Double-row pin header
Contact pitch: 1 mm
6
ꢀPin header
ꢀF: Without boss
ꢀG: With boss
ꢀCrimp socket: A
7
7
Type of housing, header
C: Crimp housing
V: Straight SMT header
H: Right angle SMT header
4
Number of contacts: 10, 20, 30, 40, 50
ꢀContacts
DF20 F - 2830 SCF A ( * * )
2
1
3
4
5
1
2
3
4
F
Contact & packaging type
SCF: Socket contact reel
Plating type
5
Packaging Specifications
Blank: 1 reel = 10,000 pieces
41: 1 reel = 20,000 pieces
Applicable wire size
2830: AWG #28 to 30
3032: AWG #30 to 32
A: Gold plating
2
ꢀDouble Row Socket
Contact No. *
Contact No. 2
Contact No. 1
Contact No. *-1
5th contact marking
Contact No. 1 mark
Shown with terminated and installed contacts
Unit: mm
B
[Specifications number]-*, (**)
(59): Gold plating, embossed tape
packaging
Product No.
CL No.
Number of Contacts
A
DF20A-10DS-1C
DF20A-20DS-1C
DF20A-30DS-1C
DF20A-40DS-1C
DF20A-50DS-1C
686-0020-3
686-0021-6
686-0022-9
686-0023-1
686-0024-4
10
20
30
40
50
17.2
12.2
17.2
22.2
27.2
14.0
19.0
14.0
19.0
24.0
Note: Sales quantities are by the package unit (containing 100 pieces). Please order by package unit.
ꢀSocket Crimp Contacts
Product No.
CL No.
Type of contacts
Reel contacts
Quantity
Plating type
Gold plating
(
(
)
)
DF20F-2830SCFA **
DF20F-3032SCFA **
686-0042-6-**
686-0043-9-**
See specifications number column
[Specifications number] -*, (**)
Blank 1 reel
41 1 reel
: 10,000 pieces
: 20,000 pieces
1.45
0.7
ꢀApplicable Wire (Tin plated solid soft conductor)
Applicable Wire Size (Stranded wire conductor)
AWG #28 (7/0.127 mm)
AWG #30 (7/0.1 mm)
Jacket diameter
0.5mm to 0.6 mm
AWG #32 (7/0.08 mm)
ꢀ
Recommended wire
ꢀStrip length
ꢀ1.2 to 1.9 mm
ꢀUL1571
Note: When using other than the recommended wire,
contact your nearest Hirose representative.
ꢀApplicable Crimping Tools
Type
Applicator
Press
CL No.
Product No.
901-4572-6 AP105-DF20-2830S
901-0005-4 CM-105
Manual crimping tool 901-4540-6 HT302/DF20B-2830S
Note 1: Hirose Electric will not be responsible for any
problems caused by use of tools other than specified.
Note 2: The manual crimping tool can be also used for
cutting-off individual contacts from the reel.
Note 3: Customers that already have DF13 Series Hirose’s
press units and applicators will be able to use them
for DF20 Series crimp terminations by replacing of
only crimper and anvil.
ꢀ
Replacement Parts List for Applicator
Type
Product No.
CL No.
Insulation crimper
Wire crimper
AP105-DF20-2830S(61)
AP105-DF20-2830S(62)
901-4572-6-61
901-4572-6-62
Insulation anvil and wire anvil AP105-DF20-2830S(63)
901-4572-6-63
Note4:
The crimping tool for the DF20F-3032SCFA can
also be used with the DF20F-2830SCFA.
3
B
A
ꢀ Double Row Straight Pin header
Contact No.3
Contact No.1
P=1
Contact No. **-1
Indication of number
of contacts
Contact No. **
6.4
5.4
Contact No.2
0.2
Ø0.5
1.9
C
D
0.2
BPCB Footprints
A
0.05
Contact No. 1 marking
P=1 0.03
0.6 0.05
0.9 0.05
0.85 0.1
D
0.05
Note 1:Shaded area must be free of any electrically conductive traces to avoid contact with soldered pin header terminations.
Note 2: Required only for pin headers supplied with the positioning boss.
Unit: mm
CL No.
A
B
C
D
Product No.
Number of contacts
Remarks
(
)
)
)
)
)
10
20
30
40
50
10
20
30
40
50
14.0
19.0
14.0
19.0
24.0
14.0
19.0
14.0
19.0
24.0
17.3
12.3
17.3
22.3
27.3
17.3
12.3
17.3
22.3
27.3
-----
15.7
10.7
15.7
20.7
25.7
15.7
10.7
15.7
20.7
25.7
DF20F-10DP-1V * *
CL686-0032-2- * *
CL686-0033-5- * *
CL686-0034-8- * *
CL686-0035-0- * *
CL686-0036-3- * *
CL686-0037-6- * *
CL686-0038-9- * *
CL686-0039-1- * *
CL686-0040-0- * *
CL686-0041-3- * *
(
-----
DF20F-20DP-1V * *
Without boss
(
-----
DF20F-30DP-1V * *
(
-----
DF20F-40DP-1V * *
(
-----
DF20F-50DP-1V * *
(
)
16.6
11.6
16.6
21.6
26.6
DF20G-10DP-1V * *
(
)
)
)
)
DF20G-20DP-1V * *
(
DF20G-30DP-1V * *
With boss
(
DF20G-40DP-1V * *
(
DF20G-50DP-1V * *
Note1:
Note2:
Order embossed tape packaging items by the reel. (1 reel contains 1,000 pieces)
Vacuum pick-up platforms are included with embossed tape packaged connectors.
[Specifications number]-*, (**)
(59): Gold plating, embossed tape
packaging
4
ꢀDouble Row Right angle Pin header
Contact No.**-1
Contact No.1
Contact No.3
Contact No.1
marking
Contact No.**
Contact No.2
B
5
Indication of
number of
contacts
A
P= 1
0.2
6.2
A
0.2
C
BPCB Footprints
0.6 0.05
P=1 0.03
A
0.05
0.1
0.75 0.1
C
Note : Shaded area must be free of any electrically conductive traces to avoid contact with soldered pin header terminations.
Unit: mm
HRS No.
A
B
C
Remarks
Product No.
Number of contacts
686-0027-2 ( * * )
686-0028-5 ( * * )
686-0029-8 ( * * )
Reserved for product expansion
Reserved for product expansion
(
)
)
)
)
)
10
20
30
40
50
24.0
29.0
14.0
19.0
24.0
27.5
12.5
17.5
22.5
27.5
26.2
11.2
DF20F -10DP-1H * *
(
DF20F -20DP-1H * *
(
16.2 Without boss
DF20F -30DP-1H * *
[Specifications number]-*, (**)
(59): Gold plating,
embossed tape packaging
(
21.2
26.2
DF20F -40DP-1H * *
(
DF20F -50DP-1H * *
Note:Order embossed tape packaging items by the reel. (1 reel contains 1,000 pieces)
5
BEmbossed Carrier Tape Dimensions
ꢀStraight pin header
2
0.1
12 0.1
4
0.1
0.4
+0.1
0
1.5
Unreeling direction
7.9
ꢀRight angle pin header
2
0.1
4
0.1
12 0.1
0.4
1.5 +0.1
(7.4)
0
Unreeling direction
ꢀReel dimensions
Number of
Contacts
A
B
C
D
Product No.
2
0.5
( )
10
20
30
40
50
10
20
30
40
50
16
24
32
44
44
16
24
32
44
44
17.5
11.5
14.2
20.2
20.2
17.5
11.5
14.2
20.2
20.2
16.4
DF20F G -10DP-1V
------
------
28.4
40.4
40.4
------
------
28.4
40.4
40.4
Product name
label
( )
24.4
32.4
44.4
44.4
16.4
24.4
32.4
44.4
44.4
DF20F G -20DP-1V
Ø1.5 mm diameter
feed hole depth
( )
DF20F G -30DP-1V
( )
DF20F G -40DP-1V
( )
DF20F G -50DP-1V
DF20F-10DP-1H
DF20F-20DP-1H
DF20F-30DP-1H
DF20F-40DP-1H
DF20F-50DP-1H
*
*
D +2
2
0.5
0
Reserved for product expansion
*
6
BUsage recommendation
1. Recommended Soldering
Temperature Profile for IR Reflow.
IR Reflow
Temperature
Preheating: 150°C for 60 sec. to 120 sec.
Soldering: 235°C 5°C for 10 sec. max.
... Maximum 240°C 220°C min.
10s to 30s ... 220°C
Maximum 240°C
220°C
Soldering
Preheating
Note 1: Up to 2 cycles of reflow soldering are possible under the same conditions, provided
that there is a return to normal temperature between the first and second cycle.
Note 2: The temperature indicates the board surface temperature at the points of contacts
with the connector terminals.
Soldering temperature: 290°C ±10°C, Soldering time: within 3 sec.
0.15mm
2.Recommended Manual Soldering Conditions
3. Recommended Solder Screen Thickness
4. Board Warping
Maximum of 0.03 mm at the connector center section, with both ends of the connector as reference points.
Refer to "Nylon Connector Use Handbook."
5. Cleaning Conditions
6. Wiring Termination Conditions
Refer to "Nylon Connector Use Handbook."
Crimp contacts should be handled with care as not to cause any deformation or damage
affecting the performance or termination.
7. Mating / un-mating precautions
Excessive twisting and pulling on wires during mating/un-mating should be avoided as it
may cause damage to connectors.
7
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明