DF49-30P-0.4SD [HRS]

0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors;


型号：	DF49-30P-0.4SD
厂家：	HRS
描述：	0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors
文件：	总11页 (文件大小：1556K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

DF49 Series

Reliable connection

0.7±0.1 (Mated height)

(0.5) Effective mating length

Figure. 1

Mis-insertion Prevention

■Features

1.Ultra low-profile structure

The bend structure of the shell

prevents the reverse insertion

A low-profile and space-saving item, with a stacking height of

0.7mm (0.8mm MAX).

2.Reliable electrical and mechanical connection

Despite its small mated height, unique contact configuration

assures highly reliable connection, with effective mating length

of 0.5mm.

3.Enhanced shielding and ground connections

Metal shells on the plug and receptacle connect to each other,

assuring reliable ground connection and EMC protection.

Figure. 2

4.Simplified lock structure with audible click

Audibly clicks into place thanks to the two-point lateral lock

structure and optimized contact force.

5.Incorrect insertion prevention mechanism

The bend structure of the shell prevents the reverse insertion

of the plug connector and mating failure.

6.Solder wicking prevention

Nickel barriers prevent solder wicking in the critical contact

areas.(Receptacle)

■Connectors for conductivity tests

We have a line-up of plug connectors for inspection, usable

for electrical testing.

2010.9

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

■Specifications

AWG42 : 0.25A

Operating temperature range -35ç to 85ç (Note 1)

Current rating

AWG44 : 0.2A

(Note 3)

電線サイズ

Operating humidity range 20% to 80%

AWG46 : 0.15A

Ratings

Item

Storage temperature range -10ç to 60ç (Note 2)

Storage humidity range 40% to 70% (Note 2)

Voltage rating

AC30V

Speciﬁcation

Conditions

1. Insulation

resistance

50 Mø min.

100 V DC

2. Withstanding voltage No ﬂashover or insulation breakdown

100 Vrms AC / 1 minute

100 mA,(DC or 1,000Hz)

3. Contact resistance

4. Vibration

Signal:80mø max, Ground 80mø max

Frequency: 10 to 55 Hz, single amplitude of 0.75mm,

10 cycles in each of the 3 directions

No electrical discontinuity of 1 μs or longer

Contact resistance (change from initial value)

50 mø max.

5.Humidity

96 hours at of 40 ±2°C, and humidity of 90 to 95%

Insulation resistance: 25 Mø min.

Contact resistance (change from initial value)

-55°C 5 to 35°C 85°C 5 to 35°C

→

6. Temperature cycle

7. Durability

50 mø max.

Time: 30 min. 2 to 3 min. 30 min. 2 to 3 min.

→ → →

5 cycles

Insulation resistance: 25 Mø min.

Contact resistance (change from initial value)

50 mø max.

30 cycles

Reflow: At the recommended temperature profile

Manual soldering: 350°C for 3 seconds

8. Resistance to

soldering heat

No deformation of affecting performance

Note 1: Includes temperature rise caused by current ﬂow.

Note 2: The term "storage" refers to products stored for a long period prior to mounting and use.

The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or

during transportation after board mounting.

Note 3: With only the connector portion at an elevated temperature level, the rated current value is set.

Note 4: Information contained in this catalog represents general requirements for this Series.

■Materials

Product

Part

Material

LCP

Finish

Remarks

UL94V-0

---------

Insulator

Color:Black

Gold plated

Tin plated

Color:Black

Gold plated

Tin plated

Receptacle

Contacts

Phosphor bronze

LCP

Metal ﬁttings

Insulator

---------

Plug

Contacts

Phosphor bronze

UL94V-0

---------

Metal cover

Shell

---------

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

■Ordering information

●Connector

( )

DF 49 J − * S − 0.4 H **

❶

❷

❸

❹

❺

❻

❼

❽

DF 49 − * P − SHL

❶

❷

❹ ❺

❾

❶ Series name:DF

❷ Series No. :49

❻ Contact pitch:0.4mm

❸ Connector style

❼ Termination type

Receptacle/Shell

H :Rightangle SMT

J:Receptacle for conductivity tests

Blank:Standard

SD:Fine coaxial cable plug

❹ Number of positions: 20,30,40

❽ Packaging

(51):Embossed tape packaging

❺ Connector type

S:Receptacle

P:Plug

❾ Installation item(separate)

SHL:Metal cover

■Combinations

[Standard use]

DF49-*S-0.4H(**)

DF49-*P-ASSY

DF49-*P-0.4SD(**)

DF49-*P-SHL

Note: The product specification of the above combination is shown on page 2.

[Receptacle conductivity test]

DF49-*S-0.4H(**)

DF49J-*P-ASSY••(Note)

DF49J-*P-0.4SD(**)

DF49-*P-SHL

Note: This harness item is only usable for the receptacle test.

For the product specification of the above combination, please contact our sales department.

[Plug conductivity test]

DF49-*S-0.4H(**)

DF49-*P-ASSY

DF49-*P-0.4SD(**)

DF49-*P-SHL

Note: For the product specification, please contact our sales department.

π : ASSY means a harness item.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

■Receptacles (SMT)

A±0.2

B±0.15

0.08±0.03

P=0.4±0.1

0.7±0.1

Contact No.1

Contact No.n

CAV No.

■Recommended PCB mounting pattern

B±0.02

0.2±0.02

P=0.4±0.02

Contact No.1

C±0.02

D±0.02

GND pad

Contact pad

[Speciﬁcation number] - **, (**)

(51):Embossed tape packaging

(7,000 pieces per reel)

Unit : mm

Part Number

CL No.

Number of contacts

DF49-20S-0.4H(**)

DF49-30S-0.4H(**)

DF49-40S-0.4H(**)

662-5503-4-**

Under planning

662-5500-6-**

12.8

16.8

20.8

7.6

12.03

16.03

20.03

11.6

15.6

Note 1: Tape and reel packaging (7,000 pieces/reel).

Order by number of reels.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

■Plugs

A±0.2

B±0.2

0.57±0.1

P=0.4±0.1

C±0.1

CAV No.

Contact No.1

[Speciﬁcation number] - **, (**)

(51):Embossed tape packaging

(7,000 pieces per reel)

Unit : mm

Part Number

CL No.

Number of contacts

DF49-20P-0.4SD(**)

DF49-30P-0.4SD(**)

DF49-40P-0.4SD(**)

662-5504-7-**

Under planning

662-5501-9-**

11.32

15.32

19.32

7.6

8.9

8.7

11.6

15.6

12.9

16.9

12.7

16.7

Note 1: Tape and reel packaging (7,000 pieces/reel).

Order by number of reels.

Note 2: The metal cover (DF49-*P-SHL) is required for ﬁne coaxial cable termination.

■Recommended Fine Coaxial Cable Preparation

E(FREE)

0.2MAX(Insulator)

Inner conductor (Pre-L

soldering required)

D±0.1

B±0.15

P=0.4±0.07

0.31MAX(Jacket)

0.44±0.03

(Ground bar)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

■Metal cover

0.65±0.1

＊

0.6±0.1

1±0.1

P=3±0.1

A±0.15

B±0.15

C±0.1

Pin No.

[Speciﬁcation number] - **, (**)

(51):Embossed tape packaging

(10,000 pieces per reel)

Unit : mm

Part Number

DF49-20P-SHL

DF49-30P-SHL

DF49-40P-SHL

CL No.

662-5505-0

Under planning

662-5502-1

Number of contacts

4.0

10.1

14.1

18.1

11.18

15.18

19.18

12.0

Note 1 : Tape and reel packaging (10,000 pieces/reel).

Order by number of reels.

Note 2 : π dimensions will be set separately during development.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

■Packaging Specification

●Embossed Carrier Tape Dimensions

8±0.1

4±0.1

2±0.15

(1.45)

Unreeling direction

●Reel Dimensions

Part number label

E MAX

Unit : mm

Part Number

CL No.

Number of contacts

−

DF49-20S-0.4H(51)

DF49-30S-0.4H(51)

DF49-40S-0.4H(51)

662-5503-4-51

Under planning

662-5500-6-51

11.5

14.2

20.2

24.0

32.0

44.0

24.4

32.4

44.4

30.4

28.4

40.4

38.4

50.4

Note 1 : Embossed tape will have perforated feed holes on single side (20pos.)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

■Packaging Specification

●Plugs

8±0.1

4±0.1

2±0.1

(1.4)

Unreeling direction

●Reel Dimensions

Part number label

E MAX

Unit : mm

Part Number

CL No.

Number of contacts

−

DF49-20P-0.4SD(51)

DF49-30P-0.4SD(51)

DF49-40P-0.4SD(51)

662-5504-7-51

Under planning

662-5501-9-51

11.5

24.0

32.0

24.4

32.4

30.4

14.2

28.4

38.4

Note 1 : Embossed tape will have perforated feed holes on single side (20pos.)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

■Extraction tool

For details about the extraction tool, please contact your Hirose sales representative.

■Precautions

1.Recommended temperature proﬁle

Temperature (ç)

250ç

220ç

250

200

150

100

60sec max

180ç

150ç

90 to 120sec

Room

temperature

100

150

200

250

300

Time (sec.)

Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu

Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions,

provided that there is a return to normal temperature between the first and

second cycle.

Note 2: The temperature profile indicates the board surface temperature at the point

of contacts with the connector terminals.

Manual soldering: 350ç for 3 seconds

2.Recommended manual soldering

Do NOT use ﬂux compound when manual soldering.

Standard thickness 0.1mm

Open area ratios:Lead terimnal 100%

:Ground terminal 75%

3.Recommended screen thickness and open

area ratio (Pattern area ratio)

4.Board warpage

Maximum of 0.02mm at the connector center, with both ends of the connector as reference points.

Refer to “Nylon Connector Use Handbook”.

5.Cleaning conditions

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

■Precautions

Precautions

Mating / un-mating

Please work according to the following operational procedure:

① Confirmation of insertion direction

Upon insertion, please check the front and rear of the connector at the cable side.

On the front side, the ∆ mark, HRS mark and the display of the pole number are stamped.

△ mark

HRS mark

CAV No.

Number of contacts indicator

② Confirmation of temporary insertion

Please lay the plug into the receptacle gently and insert up to the temporary insertion position.

* If inserted up to the temporary insertion position, the connection can be correctly ensured.

Receptacle shell dual-end surface

Plug shell end surface

Connection

direction

Receptacle shell dual-end surface

Plug shell end surface

With temporary insertion

Before temporary insertion

③ Confirmation of insertion

From the temporary insertion position, please push on both sides of the plug simultaneously and with equal force, to confirm the insertion.

Push in both

sides of the plug.

Mating

Confirmed insertion

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF49 Series●0.4 mm Pitch, Horizontal mating, Board- to-Fine Coaxial Cable Connectors

Precautions

un-mating

Use a dedicated extraction tool to un-mate the plug. Insert the tool under either end of the plug and pull as illustrated bellow.

Insert the tool under either

pull out the plug

ꢁ

Finish

ꢀꢀ

ꢁ

end of the plug.

(for the horizontal direction)

ꢀꢀ

ꢁ

• Do not mate / un-mate the connectors when receptacle is not mounted on the board.

• In the manual soldering process, don't carry out the flux coating which will cause a flux blister on the connector.

• Excessive scoop insertion or extraction may result in damage.

DF49-30P-0.4SD [HRS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E