DF64-3S-4.5H [HRS]

4.5 mm pitch, Horizontal Mating 2-Piece System Connectors;


型号：	DF64-3S-4.5H
厂家：	HRS
描述：	4.5 mm pitch, Horizontal Mating 2-Piece System Connectors
文件：	总6页 (文件大小：871K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

4.5 mm pitch, Horizontal Mating 2-Piece System Connectors

DF64 Series

(UL pending)

◆

The floating structure of the BTB connection

provides increased flexibility by absorbing

the movement of the PCB’s.

In two axes of directions

Mating

Optimal mating

X axis direction

Features

■

1. Versatile Board-to-Board and Board-to-

Wire System

The DF64 Series connector system is a Board-to-

Board connector and Board-to-Wire that utilizes a

unique floating structure and a Board-to-Wire

connector that features an excellent locking system

Y axis direction

± ±0.mm

2. Floating structure

The Board-to-Board floating structure delivers an

increased connection range together with a wide

effective mating length and width. The unique

stress-free contact structure was designed to

absorb movement and misalignment between serial

PCBs and ensure a continuous connection. (Please

refer to Figure 1)

MAX 2mm

Figure 1

Movement tolerance range for the X axis: ±±.ꢀ mm

Movement tolerance range for the Y axis: MAX 2 mm

◆Two-point contact structure

3. Reliable contact design

(B-to-B connection)

First contact point

Second contact point

Our two-point contact structure provides a highly

reliable contact system. (Please refer to Figure 2)

［A-A］

4. Stress free side-locking system for

Board-to-Wire connections

The BTW side-locking structure provides a clear

tactile click to confirm completion of the mating

process and also allows for a visual check on the

side locks. The structure endures wiring stress and

prevents the wires from being pulled out of

alignment. (Please refer to Figure 3)

Figure 2

◆BTW side-lock structure

Clear tactile click and

visual check possible0

5. 350V voltage capacity

Its unique mating structure secures a creepage

distance of no less than 3.2 mm between the

contacts and produces a 3ꢀ± V voltage capacity.

6. PCB layout simplification

The DF64 connector system shares one common

receptacle. This helps to simplify the PCB layout by

accepting the BTB header and the BTW cable plug.

Figure 3

7. Resistant to high heat

These connectors can operate in temperatures of

up to 1±ꢀç

2013.11

DF64 Series●4.5 mm pitch, Horizontal Mating 2-Piece System Connectors

Product Speciﬁcations

■

Current

Rating

BtoB

BtoW

Operating Temperature Range: .. to 1±. (Note 2)

～

℃

AWG#18 AWG#2± AWG#22

Operating Humidity Range

: 2± to 8±% (Note 3)

Ratings

(Note 1)

Voltage

Storage Temperature Range: 1± to 6± (Note 4)

℃

AC/DC 3.±V

ꢀ

Rating

Storage Humidity Range

: 4± - 7± (Note 4)

％

Item

Specifications

Conditions

10 Insulation

resistance

No less than 1,±±± Mø

Measured at DC .±± V

20 Withstand voltage No ﬂashover or breakdown

AC 1, .±± V is applied for one minute0

30 Contact

3± Mø max

resistance

Measured at no more than DC 6 V, 1±± mA (DC or 1,±±± Hz)

40 Vibration

Resistance

No electrical discontinuity of 1µs or

greater

Frequency 1±-.. Hz, half amplitude ±07. mm, 1± cycles in each

of three directions(axes)

Accelerated velocity: 49± m/s², for 11 ms, half-sine in 3

directions, 3 times for each of the three directions (axes)

No electrical discontinuity outage of

1µs or greater

.0 Shock Resistance

60 Moisture-

resistance

Contact resistance 3± Mø max

Insulation resistance 1,±±± Mø minimum

■

Temperature: 4± ±2çꢀ humidity: 9± to 9.%, left as it is for 96 hours

70 Temperature

cycles

Contact resistance 3± Mø max

Insulation resistance 1,±±± Mø minimum

-.. for 3± minutes . to 3. for 2 to 3 minutes 1±. for

ç → ç → ç

3± minutes . to 3. for 2 to 3 minutes) in . cycles

→ ç

■

Number of matings/unmatings

■

80 Durability

Contact resistance 3± Mø max

■

1± mating cycles

Reﬂow: according to the Recommended Temperature Proﬁle

Hand soldering: temperature of soldering iron at 3.± ±1± for

The resin components will not

become deformed or loose

performance due to deformities

90 Resistance to

solder heat

3 seconds

(Note 1) This is the maximum current rating while all pins are powered or used as all power lines0

(Note 2) Includes the temperature rise of power lines0

(Note 3) Use without condensation on parts0

(Note 4) The storage condition refers to long-term storage of the product on the shelf before assembly0 Please use the operating

temperature for temporary storage such as pre-assembly and during shipping0

Materials

■

Product

Part

Insulator

Materials

LCP

Finish

Beige

UL spec0

UL94V-±

Receptacle

Header

Contact

Reinforcing metal ﬁttings

Insulator

Contact

Reinforcing metal ﬁttings

Insulator

Copper alloy

Brass

LCP

Copper alloy

Brass

Tin-plating

Beige

Tin-plating

Beige

−

UL94V-±

−

UL94V-±

−

Crimp case

Crimp contact

LCP

Contact

Phosphorous Bronze

Tin-plating

Product Number Structure

■

Refer to the charts below for determining speciﬁc part number characteristics0

Please select connectors listed in this catalog when placing orders and be sure to check the latest delivery speciﬁcations at the

time of ordering the product0

●Connector

DF 64 * S 4.5 H

❶

❷

❸

❹

❺

❻

DF 64 * P 4.5 H

Series Name: DF

Series No0: 64

Pitch : 40. mm

❶

❷

❸

❹

❺

❶

❷

❸

❹

❺

❻

Wiring type

H: SMT Right Angle Type

C: crimp housing

❻

ꢀ

Number of contacts: 2, 3

Connector type

S: receptacle P: plug

DF 64 * P 4.5 C

❶

❷

❸

❹

❺

❻

●Contact

Applicable wire size

1822 : 18 – 22 AWG

Packaging style

PCF: In-line plug plug contact, on reel

PC: In-line plug contact, loose piece

❶

❷

ꢀ

DF 64 1822 PCF

❶

❷

DF64 Series●4.5 mm pitch, Horizontal Mating 2-Piece System Connectors

Right angle receptacle

■

Recommended PCB layout (t=1.6 mm)

P=4.5

4.7

2±0.05

B±0.05

2±0.05

1.5±0.05

P=4.5±0.05

Part Number.

HRS No.

No. of Contacts

DF64-2S-4.5H

DF64-3S-4.5H

667-1002-9-00

Under development

14.4

18.9

11.8

16.3

(Note) This product is sold 500 connectors per reel. Please order by full reel quantities.

●Tape and Reel dimensions

Unreeling direction

P=24±0.1

P=4±0.1

2±0.15

E-E

F-F

Part Number

HRS No.

No. of Contacts

DF64-2S-4.5H

DF64-3S-4.5H

667-1002-9-00

Under development

28.4

40.4

DF64 Series●4.5 mm pitch, Horizontal Mating 2-Piece System Connectors

Right angle pin header (SMT)

■

Recommended PCB layout (t=1.6 mm)

P=4.5

4.62

2±0.05

B±0.05

2±0.05

1.5±0.05

Product No.

HRS No.

No. of Contacts

DF64-2P-4.5H

DF64-3P-4.5H

667-1001-6-00

Under development

14.4

18.9

11.8

16.3

(Note) This product is sold 500 connectors per reel. Please order by full reel quantities.

● Tape and Reel dimensions

Unreeling direction

P=24±0.1

P=4±0.1

E-E

2±0.15

F-F

Product No.

HRS No.

No. of Contacts

DF64-2P-4.5H

DF64-3P-4.5H

667-1001-6-00

Under development

28.4

40.4

DF64 Series●4.5 mm pitch, Horizontal Mating 2-Piece System Connectors

Crimp socket

■

4.55

P=4.5

Part Number

HRS No.

No. of Contacts

[Speciﬁcation Number]

None: 1 package contains

100 pieces

DF64-2P-4.5C

DF64-3P-4.5C

667-1003-1-00

Under development

18.4

22.9

19.0

23.5

(Note) Each package contains 100 pieces. Please order in full package quantities.

Crimp contact

■

2.1

t=0.2

Product No.

HRS No.

Type

Quantity

Finish

DF64-1822PCF

DF64-1822PC

667-1004-4-00

Under development

Reel contact (Note 1)

Loose piece contact (Note 2)

1 reel = 5,000 pieces

1 package = 100 pieces

Tin-plating

(Note 1) This product is sold 5,000 pieces per reel. Please order by full reel quantities.

(Note 2) Each package contains 100 pieces. Please order in full package quantities.

●Applicable wire (Tinned, annealed copper wire)

●Recommended wire

Conductor size (Core structure)

AWG (34 pieces/ 0.18 mm)

Jacket Diameter

UL1015

2.9mm

2.6mm

2.4mm

（Ø

）

●Strip length

AWG (21 pieces/ 0.18 mm)

3.0～4.0mm

AWG (17 pieces/ 0.16 mm)

(Note 1) Applicable wires will have conductors that are comprised of annealed, tin-plated material.

(Note 2) Please contact your local Hirose sales rep if you plan on using wires other than those listed above.

Applicable crimping tool

□

Item

Part Number

AP105-DF64-1822

CM-105

HRS No.

Applicable contact

DF64-1822PCF

−

Applicator

Press body

Hand tool

CL901-4633-9-00

CL901-0005-4-00

Under development

HT801/DF64-1822

DF64-1822PC

DF64-1822PCF

DF64-1822PC

Extraction tool

DF62/RE-MD

CL902-4645-4-00

(Note 1) Please conduct crimping work according to the "Crimping work standards" and "Crimping condition table".

(Note 2) Hirose does not cover damage created by the use of unapproved Hirose Tools. Please contact your local

Hirose Sales for clariﬁcation.

(Note 3) Hand tools do not have replaceable dies.

(Note 4) Approved wire is limited to UL1015; 18, 20, 22 AWG.

DF64 Series●4.5 mm pitch, Horizontal Mating 2-Piece System Connectors

Precautionary notes

□

1.Recommended

Temperature Proﬁle

(Compatible with lead-free

soldering)

[Applicable Conditions]

1. Peak temperature

2. Heating unit: no less than 220 for no more than 60 seconds

℃

3. Preheating unit: 150 to 180 for 90 to 120 seconds

℃

4. Number of times: 2 times max.

Measurement is conducted at the contact lead part

＊

Please check the mounting conditions before use. Conditions such as solder paste

types, manufacturer, PCB size and any other soldering materials may alter the

performance of such materials.

(Note 1) This temperature proﬁle is a recommended value only; please contact your

Hirose Sales Rep for more information

2.Recommended hand

soldering conditions

Temperature of soldering iron: 350 10 , soldering time: no more than 3 seconds

3. Recommended screen

thickness, aperture ratio

(pattern surface ratio)

Thickness: 0.1 mm, aperture ratio: 100%

A maximum of 0.02 mm at the center of connector, as measured from either end of the

connector

4. Warping of the Board

5. Cleaning Conditions

IPA cleaning is allowed. (Cleaning is not recommended because cleaning may change

the push/pull feeling etc. Please contact your local Hirose representative prior to the

use of any cleaning agents. )

When inserting the crimp contact into the crimp socket, do not insert it at a slanted

angle to maintain the reliability of its performance.

■

6. Important Notes

Please use caution when mating/unmating this connector if it has not been mounted

onto the PCB, doing so could deform or damage the contacts.

Do not pull on the wires of this connector as this may cause damage to the

connector.

During the hand soldering process, make sure to not apply too much ﬂux. Doing so

may cause a solder wicking problem.

This product may experience some differences in color from one production lot to

another. This color difference does not inﬂuence the performance of the connector.

6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: 81-45-620-3526 Fax: 81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 11/2±13. Contents are subject to change without notice for the purpose of improvements.

DF64-3S-4.5H [HRS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E