FH17LR-24S-0.5SH [HRS]
Low Profile 0.5mm Pitch Connectors For FPC; 薄型0.5mm间距连接器用于FPC
| 型号： | FH17LR-24S-0.5SH |
| 厂家： | 
HRS |
| 描述： | Low Profile 0.5mm Pitch Connectors For FPC |
| 文件： | 总13页 (文件大小：345K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Low Profile 0.5mm Pitch Connectors For FPC
FH17 Series
FH17 (on-board type) flip-lock mechanism
FH17L(board drop-in standard type)flip-lock mechanism
ꢀFeatures
1. Low profile 0.5mm pitch FPC connectors
As products become lighter/thinner/shorter/smaller, requests for
thinly-made type FPC connectors are rapidly increasing. The FH17
Series is an ultra miniature version of the Hirose’s popular FH12
Series. FH17 has 35 45
%
-
% lower profile above the board.
* FH17 : On-board type, height of 1.3 mm from board surface
*
*
FH17L
FH17LR
:
:
Offset standard type, height of 1.0 mm from board surface
Offset reverse type, height of 1.0 mm from board surface
(
2. Easy to use Flip-Lock Actuator
Flip-lock (rotating type) ZIF mechanism enables good connectivity
of FPC by a simple operation and light force. No board space is
required for flip lock operation as compared to slide lock ZIF
connectors.
3. Variety of Sizes and Options
In addition to the on-board type (FH17), board drop-in types (FH17L
and FH17LR) are also available. Selection will depend on the
application mounting. Connectors are available with 8 to 30
contacts.
FH17LR (board drop-in reverse type) flip-lock mechanism
4. Adaptable to thin-type FPC
(
)
It conforms to the thin-type FPC 0.17mm now being used for small
size electronic equipment such as cameras, etc.
(Thin-type FPC: Specifications without stiffener of double-faced
FPC will reduce the cost of FPC. A single-faced FPC still requires
stiffener, but the reduced thickness is easier for manufacturers to
produce.
5. Packaged for Pick-and-Place machine
Embossed tape packaging allows automatic mounting.
ꢀApplications
Mobile telephones, devices using LCDs, CD-ROMs, cameras, other
miniature devices
25
ꢀProduct Specifications
Operating temp. range
Storage temp. range
-10 to +50ç(Note.2)
-40 to +70ç(Note.1)
Current rating
Voltage rating
0.4A DC
50V AC
Ratings
Operatinghumidity range relative humidity 90% max.
(No dew-fall)
Storage Humidity range relative humidity 90% max.
(No dew-fall)
(Note:4)
+0.03
t=0.17
-0.04
Applicable FPC
Tin-lead plating
Item
Specification
Conditions
1.Insulation resistance
2.Withstanding voltage
3.Contact resistance
100V DC
500M ohms minimum
150V AC/1 minute
1mA
No flashover or insulation breakdown.
50m ohms maximum
4.Durability
(Insertion/withdrawal)
Contact resistance : 50m ohms maximum
No damage, cracks, or parts dislocation.
20 cycles
No electrical discontinuity of 1µs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 directions.
5.Vibration
6.Shock
No electrical discontinuity of 1µs or more
Contact resistance: 50m ohms maximum
No damage, cracks, or parts dislocation.
2
Acceleration of 490 m/s , 11 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis.
Contact resistance: 50m ohms maximum
Insulation resistance: 50M ohms minimum
No damage, cracks, or parts dislocation.
7.Humidity
96 hours at temperature of 40ç and humidity of 90% to 95%
(Steady state)
5 cycles under conditions as follows; Temperature:
-40ç / 15 to 35ç / 85ç / 15 to 35ç,
Time: 30 / 5 max. / 30 / 5 max.(minutes)
Contact resistance: 50m ohms maximum
Insulation resistance: 50M ohms minimum
No damage, cracks, or parts dislocation.
8.Temperature cycle
9.Resistance to
soldering heat
Reflow: At the recommended temperature profile
Manual soldering: 350 5ç for 3 seconds
No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation.
Note 3. The above standards represent this series. The individual formal agreement should be based on the Specification.
ꢀMaterial
Part
Material
LCP
PPS
Finish
--------------
--------------
Remarks
UL94V-0
Insulator
Insulator
Contact
Metal fittings
Insulated tape
Phosphor bronze
Brass
Tin-lead plating
Tin-lead plating
--------------
--------------
--------------
UL94V-0
Polyamide
ꢀOrdering Information
1
2
Series Name
Mounting Type
FH17
None : On-Board type
L
: Offset type
LR
: Offset reverse type
( )
FH17L - 30S - 0.5 SH 05
3
4
5
6
Number of Contacts 8, 10, 15, 20, 24, 30
1
2
3
4
5
6
Contacts Pitch
Contact Style
0.5mm
:
SH SMT horizontal mounting type
Plating specifications Blank : Tin-lead plating
(
05
)
: Gold plating
26
BConnector Operating Instructions, precautions and recommendations
Operation
Precautions
1) Do not apply excessive force or use any type of
tool to operate the actuator.
1.FPC Termination procedure. Connector
installed on the board.
1) Lift up the actuator. Use thumb or index finger.
2) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC is not moved and
remains fully inserted. Should the FPC be moved,
open the actuator and repeat the process, starting
with Step 1 above.
2) The connector will assure reliable performance
when the actuator is open to 90° maximum (see
fig.1) Do not exceed this angle, as this may cause
permanent damage to the connector.
3) Assure that the FPC is fully inserted parallel to
mounting surface, with the exposed conductive
traces facing down.
2.FPC Removal
1) Lift up the actuator.
2) Carefully remove the FPC.
FPC conductor surface
(Bottom side)
27
(
)
On-Board Type FH17
A
B
0.5
0.2
C
4.3
0.6
D
E
F
Note 1 The coplanarity of each lead and metal fitting is within 0.1.
(mm)
Number of
Part Number
CL No.
A
B
C
D
E
F
Contacts
10
FH17-10S-0.5SH
FH17-15S-0.5SH
FH17-20S-0.5SH
FH17-24S-0.5SH
FH17-30S-0.5SH
586-0638-8
586-0657-2
586-0637-5
586-0645-3
586-0625-6
08.2
10.7
13.2
15.2
18.2
04.5
07.0
09.5
11.5
14.5
09.8
12.3
14.8
16.8
19.8
05.57
08.07
10.57
12.57
15.57
08.5
11.0
13.5
15.5
18.5
06.1
08.6
11.1
13.1
16.1
15
20
24
30
Note:Embossed tape reel packaging(2,000 pieces/reel).
Order by number of reels.
28
(
)
BRecommended Land/ Metal Mask Dimensions FH17
*Recommended metal mask thickness: t = 0.15
(mm)
Number of
Part Number
CL No.
B
G
H
J
Contacts
10
FH17-10S-0.5SH
FH17-15S-0.5SH
FH17-20S-0.5SH
FH17-24S-0.5SH
FH17-30S-0.5SH
586-0638-8
586-0657-2
586-0637-5
586-0645-3
586-0625-6
04.5
07.0
09.5
11.5
14.5
09.1
11.6
14.1
16.1
19.1
06.1
08.6
11.1
13.1
16.1
05.3
07.8
10.3
12.3
15.3
15
20
24
30
Note:Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
29
Offset Standard Type (FH17L)
A
B
0.5
(0.2)
4.55
2
(0.3)
C
(0.3)
D
K
F
L
Note: The coplanarity of each lead and metal fitting is within 0.1.
(mm)
Number of
Part Number
CL No.
A
B
C
D
K
F
L
Contacts
08
FH17L-08S-0.5SH
FH17L-10S-0.5SH
FH17L-20S-0.5SH
FH17L-30S-0.5SH
586-0654-4
586-0650-3
586-0651-6
586-0652-9
07.2
08.2
13.2
18.2
03.5
04.5
09.5
14.5
08.8
09.8
14.8
19.8
04.57
05.57
10.57
15.57
12.8
13.8
18.8
23.8
05.1
06.1
11.1
16.1
04.4
05.4
10.4
15.4
10
20
30
Note:Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
30
Offset Reverse Type (FH17LR)
A
B
0.5
(0.2)
4.55
2
(0.5)
(0.5)
C
D
K
F
L
Note: The coplanarity of each lead and metal fitting is within 0.1.
(mm)
L
Number of
Part Number
CL No.
A
B
C
D
K
F
Contacts
08
FH17LR-08S-0.5SH
FH17LR-10S-0.5SH
FH17LR-20S-0.5SH
FH17LR-24S-0.5SH
FH17LR-30S-0.5SH
586-0666-3
586-0659-8
586-0660-7
586-0683-2
586-0661-0
07.2
08.2
13.2
15.2
18.2
03.5
04.5
09.5
11.5
14.5
08.8
09.8
14.8
16.8
19.8
04.57
05.57
10.57
12.57
15.57
12.8
13.8
18.8
20.8
23.8
05.1
06.1
11.1
13.1
16.1
04.4
10
20
24
30
05.4
10.4
12.4
15.4
Note:Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
31
BRecommended Land/ Metal Mask Dimensions (FH17L and FH17LR)
M 0.1
N 0.1
P 0.1
* Recommended metal mask thickness: t=0.15
0.3 0.03(Land)
0.5 0.05
0.25 0.03(Metal Mask)
B 0.05
Note: The coplanarity of each lead and metal fitting is within 0.1.
(mm)
Number of
Part Number
CL No.
B
M
N
P
Contacts
FH17L- 8S-0.5SH
FH17L- 10S-0.5SH
FH17L- 20S-0.5SH
FH17L- 30S-0.5SH
FH17LR-8S-0.5SH
FH17LR-10S-0.5SH
FH17LR-20S-0.5SH
FH17LR-24S-0.5SH
FH17LR-30S-0.5SH
586-0654-4
586-0650-3
586-0651-6
586-0652-9
586-0666-3
586-0659-8
586-0660-7
586-0683-2
586-0661-0
08
03.5
04.5
09.5
14.5
13.4
14.4
19.4
24.4
13.4
14.4
19.4
21.4
24.4
10.4
11.4
16.4
21.4
10.8
11.8
16.8
18.8
21.8
09.4
10.4
15.4
20.4
10
20
30
0
0
0
0
0
9.8
8
3.5
4.5
9.5
10
20
24
30
10.8
15.8
17.8
20.8
11.5
14.5
Note:Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
32
BRecommended FPC Dimensions (FH17, FH17L, and FH17LR)
+0.03
– 0.04
0.17
0.5 0.05
B 0.05
Q 0.07
0.35 0.03
0.5 0.1
0.5 0.1
* A combination of polyamide and heat-hardened adhesive should be used for the stiffener material in
the case of single-sided FPC.
The copper foil of the rear surface should not be used in the case of double-sided FPC.
(mm)
Number of
Part Number
CL No.
B
Q
Contacts
10
FH17- 10S-0.5SH
FH17- 15S-0.5SH
FH17- 20S-0.5SH
FH17- 24S-0.5SH
FH17- 30S-0.5SH
FH17L- 08S-0.5SH
FH17L- 10S-0.5SH
FH17L- 20S-0.5SH
FH17L- 30S-0.5SH
FH17LR-08S-0.5SH
FH17LR-10S-0.5SH
FH17LR-20S-0.5SH
FH17LR-24S-0.5SH
FH17LR-30S-0.5SH
586-0638-8
586-0657-2
586-0637-5
586-0645-3
586-0625-6
586-0654-4
586-0650-3
586-0651-6
586-0652-9
586-0666-3
586-0659-8
586-0660-7
586-0683-2
586-0661-0
04.5
07.0
09.5
11.5
14.5
03.5
04.5
09.5
14.5
03.5
04.5
09.5
11.5
14.5
05.5
08.0
10.5
12.5
15.5
04.5
05.5
10.5
15.5
04.5
05.5
10.5
12.5
15.5
15
20
24
30
08
10
20
30
08
10
20
24
30
Note:Embossed tape reel packaging (2,000 pieces/reel).
Order by number of reels.
33
BPackaging Specification
On-Board Type (FH17)
ꢀEmbossed Carrier Tape Dimensions
2
12
4
1.8
0.3
1.5
Flat surface for placement
with Automatic equipment
4.6
1.9
1.4
Unreeling direction
(mm)
Number of
Contacts
Part Number
CL No.
R
S
T
U
V
W
FH17-10S-0.5SH
FH17-15S-0.5SH
FH17-20S-0.5SH
FH17-24S-0.5SH
FH17-30S-0.5SH
586-0638-8
586-0657-2
586-0637-5
586-0645-3
586-0625-6
10
15
20
24
30
16
24
24
24
32
---------
---------
---------
---------
28.4
07.5
11.5
11.5
11.5
14.2
10.6
13.1
15.6
17.6
20.6
06.5
09.0
11.5
13.5
16.5
16.5
24.5
24.5
24.5
32.5
ꢀReel Dimensions
W
2
Mounting portion
Leader area (400mm or more)
End portion
Top cover tape
Empty section
Embossed carrier tape
Empty section
(10 pockets or more)
(10 pockets or more)
34
Offset Type (FH17L and FH17LR)
ꢀEmbossed Carrier Tape Dimensions
2
12
4
1.8
0.3
1.5
5.6
Flat surface for placement
with Automatic equipment
2.8
1.9
Unreeling direction
(mm)
(mm)
W
Standard Type
Reverse Type
Number. of
Contacts
Number. of
Contacts
Part Number
CL No.
R
S
T
X
W
Part Number
CL No.
R
S
T
X
FH17L-08S-0.5SH 586-0654-4 08
FH17L-10S-0.5SH 586-0650-3 10
FH17L-20S-0.5SH 586-0651-6 20
FH17L-30S-0.5SH 586-0652-9 30
24
24
---- 11.5 13.8 24.5
---- 11.5 14.8 24.5
FH17LR-08S-0.5SH 586-0666-3 08
FH17LR-10S-0.5SH 586-0659-8 10
FH17LR-20S-0.5SH 586-0660-7 20
FH17LR-24S-0.5SH 586-0683-2 24
FH17LR-30S-0.5SH 586-0661-0 30
24
24
---- 11.5 13.8 24.5
---- 11.5 14.8 24.5
32 28.4 14.2 19.8 32.5
44 40.4 20.2 24.8 44.5
32 28.4 14.2 19.8 32.5
32 28.4 14.2 21.8 32.5
44 40.4 20.2 24.8 44.5
ꢀReel Dimensions
W
2
Mounting portion
Lead portion (400mm min.)
End portion
Top cover tape
Blank portion
Blank portion
(10 pockets min.)
Embossed carrier tape
(10 pockets min.)
35
BRecommended Temperature Profile
HRS test conditions
Solder method
:Reflow, IR/hot air
(Nihon Den-netsu Co., Ltd.’s
Part Number: SENSBY NR-2)
:Room air
Environment
Solder composition :Paste, 63%Sn/37%Pb
(Senju Metal Industry, Co., Ltd.’sPart
Number: OZ63-201C-50-9)
Test board
:
Glass epoxy 40mm∞80mm∞1.6mm thick
Land dimensions
:On-Board type 0.3mm
Offset type 0.3mm 1.5mm
:On-Board type
∞1.0mm
∞
Metal mask
0.25mm∞1.0mm∞0.15mm thick
Offset type
0.25mm∞1.5mm∞0.15mm thick
This temperature profile is based on the above conditions.
\In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
36
BFH17 Series FPC Construction (Recommended Specifications)
1. Single-Sided FPC
Material Name
Covering layer film
Cover adhesive
Surface treatment
Copper foil
Material
Thickness (µm)
Polyamide 1 mil
25
25
5
Tin-lead plating
Cu
1oz
35
18
25
30
50
163
Base adhesive
Base film
Polyamide 1 mil
Reinforcement material adhesive Heat-hardened adhesive
Stiffener
Polyamide 2 mil
Total
2. Using Double-Sided FPC
Material Name
Material
Thickness (µm)
Covering layer film
Cover adhesive
Surface treatment
Through hole copper
Copper foil
Polyamide 1 mil
25
25
5
Tin-lead plating
Cu
15
35
18
25
18
35
33
25
174
Cu
1oz
Base adhesive
Base film
Polyamide 1 mil
Base adhesive
Copper foil
Cu
1oz
Cover adhesive
Covering layer film
Polyamide 1 mil
Total
Note: Stiffener is not required for the double-sided FPC.
To prevent release of the lock due to FPC bending, please do not use copper foil on the rear side.
3. Precautions
1. This specification is a recommendation for the construction of the FH17 Series FPC (t=0.17 +0.03/-0.04).
2. The FH17 Series are connectors for thin FPC which is beginning to be used in cameras and other miniature equipment.
Stiffener is not required for double-sided FPC which will be reflected in FPC cost reduction.
Please Note that in the case of single-sided FPC, stiffener is required, but the thickness dimension can be created easily.
For details about the construction, please contact the FPC/FFC manufacturers.
FPC/FFC Manufactures' Contact List
Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division
5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan
TEL:+81 3 5462 4191
FAX:+81 3 5462 4882
Fujikura Ltd. Electronics Global Marketing Department
1-5-1, Kiba, Koto-ku, Tokyo, Japan
TEL:+81 3 5606 1165
FAX:+81 3 5606 1530
NOK Corporation Sales Division Overseas Business Department
1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan
TEL:+81 3 3432 6976/8415
FAX:+81 3 3432 3919
37
相关型号：
FH18-17S-0.3SHW(05)
Card Edge Connector, 17 Contact(s), 1 Row(s), Female, Right Angle, 0.024 inch Pitch, Surface Mount Terminal, Eject Lever
HRS
FH18-17S-0.3SHW(55)
Card Edge Connector, 17 Contact(s), 1 Row(s), Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Eject Lever
HRS
FH18-21S-0.3SHW(05)
Card Edge Connector, 21 Contact(s), 1 Row(s), Female, Right Angle, 0.024 inch Pitch, Surface Mount Terminal, Eject Lever
HRS
FH18-25S-0.3SHW(05)
Card Edge Connector, 25 Contact(s), 1 Row(s), Female, Right Angle, 0.024 inch Pitch, Surface Mount Terminal, Eject Lever
HRS
FH18-25S-0.3SHW(55)
Card Edge Connector, 25 Contact(s), 1 Row(s), Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Eject Lever
HRS
FH18-27S-0.3SHW(05)
Card Edge Connector, 27 Contact(s), 1 Row(s), Female, Right Angle, 0.024 inch Pitch, Surface Mount Terminal, Eject Lever
HRS
©2020 ICPDF网 联系我们和版权申明